OPERATOR STATION
CONSOLE GPCONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
OPERATOR STATION
CONSOLE GP
#SEBP50750710
206-1702: CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR -LH
S/N DPH1-UP
PART OF 335-3049, 335-3050, 358-8135, 358-8136 CAB AR, 335-3047, 335-3048, 358-8133, 358-8134 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DPH1-UP
PART OF 335-3049, 335-3050, 358-8135, 358-8136 CAB AR, 335-3047, 335-3048, 358-8133, 358-8134 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6600 E | SEAL (34-CM) | ||
| 2. | 5P-5927 D | SEAL (1.7-M) | ||
| 3. | 206-1696 | [1] | CONSOLE AS (LH) | |
| 4. | 206-1698 | [1] | DOOR-STORAGE | |
| 5. | 206-1699 | [1] | CUP HOLDER | |
| 6. | 206-1706 | [1] | BOX AS-STORAGE | |
| 7. | 206-1708 J | [1] | LOCK AS | |
| 8. | 206-1712 | [1] | HINGE-DOOR | |
| 9. | 210-6491 | [1] | CUP HOLDER | |
| 10. | 249-2482 | [1] | PLATE | |
| 11. | 261-9636 | [1] | BRACKET-SUPPORT | |
| 12. | 261-9637 | [2] | BRACKET AS | |
| 13. | 261-9639 | [3] | SCREW-PAN HEAD (12.0X0.5-IN) | |
| 14. | 293-1980 E | SEAL (71-CM) | ||
| 14A. | 293-1980 E | SEAL (77-CM) | ||
| 15. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 16. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 9X-2038 | [6] | WASHER (7X19X2-MM THK) | |
| 18. | 9X-2044 M | [19] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
#SEBP50750711
317-5539: CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR -FRONT
S/N DPH1-UP
PART OF 335-3049, 335-3050, 358-8135, 358-8136 CAB AR, 335-3047, 335-3048, 358-8133, 358-8134 CANOPY AR-OPEN ROPS
Type 1
AN ATTACHMENT
S/N DPH1-UP
PART OF 335-3049, 335-3050, 358-8135, 358-8136 CAB AR, 335-3047, 335-3048, 358-8133, 358-8134 CANOPY AR-OPEN ROPS
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 2. | 184-5293 B | [1] | PLUG | |
| 3. | 206-1659 | [1] | DOOR-STORAGE | |
| 4. | 206-1662 | [1] | CONSOLE AS-FRONT (UPPER) | |
| 206-1667 | [8] | CLIP (TRIM) | ||
| 5. | 206-1663 | [1] | CONSOLE-FRONT (MIDDLE) | |
| 6. | 206-1708 J | [1] | LOCK AS | |
| 7. | 224-2147 | [1] | CONSOLE AS-FRONT (LOWER, LH) | |
| 8. | 224-2149 | [1] | CONSOLE AS-FRONT (LOWER, RH) | |
| 9. | 233-5260 | [2] | LANYARD | |
| 10. | 258-2354 | [1] | BRACKET-LATCH | |
| 11. | 261-9639 | [10] | SCREW-PAN HEAD (12.0X0.5-IN) | |
| 12. | 313-6711 | [1] | COVER AS-STEERING COLUMN (UPPER) | |
| 206-1667 | [2] | CLIP (TRIM) | ||
| 13. | 313-6712 | [1] | COVER AS-STEERING COLUMN (FRONT) | |
| 14. | 313-6713 | [1] | COVER AS-STEERING COLUMN (REAR) | |
| (EACH COVER AS-STEERING COLUMN INCLUDES) | ||||
| 206-1667 | [4] | CLIP (TRIM) | ||
| 15. | 320-9835 | [1] | FILM-INSTRUCTION (FORWARD, NEUTRAL, REVERSE) | |
| 16. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| 17. | 206-1854 | [1] | HINGE | |
| 18. | 8T-2658 M | [2] | LOCKNUT (M3X0.5-THD) | |
| 19. | 9X-2038 | [3] | WASHER (7X19X2-MM THK) | |
| 20. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 21. | 9X-2045 M | [16] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 22. | 220-0738 E | SEAL (22-CM) | ||
| 23. | 5P-7070 D | INSULATION-STRIP (0.1-M EACH) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
#SEBP50750712
317-5539: CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR -FRONT
S/N DPH1-UP
PART OF 335-3049, 335-3050, 358-8135, 358-8136 CAB AR, 335-3047, 335-3048, 358-8133, 358-8134 CANOPY AR-OPEN ROPS
Type 2
AN ATTACHMENT
S/N DPH1-UP
PART OF 335-3049, 335-3050, 358-8135, 358-8136 CAB AR, 335-3047, 335-3048, 358-8133, 358-8134 CANOPY AR-OPEN ROPS
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 2. | 206-1659 | [1] | DOOR-STORAGE | |
| 3. | 206-1662 | [1] | CONSOLE AS-FRONT (UPPER) | |
| 206-1667 | [8] | CLIP (TRIM) | ||
| 4. | 206-1663 | [1] | CONSOLE-FRONT (MIDDLE) | |
| 5. | 206-1708 J | [1] | LOCK AS | |
| 6. | 224-2147 | [1] | CONSOLE AS-FRONT (LOWER, LH) | |
| 7. | 224-2149 | [1] | CONSOLE AS-FRONT (LOWER, RH) | |
| 8. | 227-1057 BC | [1] | PLUG | |
| 9. | 233-5260 | [2] | LANYARD | |
| 10. | 258-2354 | [1] | BRACKET-LATCH | |
| 11. | 261-9639 | [10] | SCREW-PAN HEAD (12.0X0.5-IN) | |
| 12. | 313-6711 | [1] | COVER AS-STEERING COLUMN (UPPER) | |
| 206-1667 | [2] | CLIP (TRIM) | ||
| 13. | 313-6712 | [1] | COVER AS-STEERING COLUMN (FRONT) | |
| 14. | 313-6713 | [1] | COVER AS-STEERING COLUMN (REAR) | |
| (EACH COVER AS INCLUDES) | ||||
| 206-1667 | [4] | CLIP (TRIM) | ||
| 15. | 320-9835 | [1] | FILM-INSTRUCTION (FORWARD, NEUTRAL, REVERSE) | |
| 16. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| 17. | 206-1854 | [1] | HINGE | |
| 18. | 8T-2658 M | [2] | LOCKNUT (M3X0.5-THD) | |
| 19. | 9X-2038 | [3] | WASHER (7X19X2-MM THK) | |
| 20. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 21. | 9X-2045 M | [16] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 22. | 5P-7070 D | INSULATION-STRIP (0.1-M EACH) | ||
| 23. | 220-0738 E | SEAL (22-CM) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
#SEBP50750713
336-7545: CONSOLE GP-OPERATOR
336-7545 CONSOLE GP-OPERATOR -RH
S/N DPH1-UP
PART OF 335-3049, 335-3050, 358-8135, 358-8136 CAB AR, 335-3047, 335-3048, 358-8133, 358-8134 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DPH1-UP
PART OF 335-3049, 335-3050, 358-8135, 358-8136 CAB AR, 335-3047, 335-3048, 358-8133, 358-8134 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-3163 B | [1] | PLUG | |
| 2. | 164-1178 | [1] | CLIP | |
| 3. | 167-8251 | [1] | FASTENER | |
| 4. | 206-1678 | [1] | HOUSING AS (UPPER) | |
| 5. | 206-1681 | [1] | PANEL AS (LOWER) | |
| 172-8591 M | [5] | NUT-CLIP (M6X1-THD) | ||
| 6. | 206-1687 | [1] | COVER-FUSE | |
| 7. | 206-1690 | [1] | COVER (FENDER, REAR) | |
| 8. | 206-1692 | [1] | COVER AS (CONTROLS, REAR) | |
| 206-1667 | [3] | CLIP (TRIM) | ||
| 9. | 231-9361 | [1] | FILM-IDENTIFICATION (FUSE, RELAY) | |
| 10. | 248-2709 B | [2] | PLUG | |
| 11. | [1] | FILM-INSTRUCTION (BOOM LOCK) | ||
| 12. | [1] | FILM-INSTRUCTION (VARIABLE SPEED) | ||
| 13. | 255-0793 | [1] | FILM-WARNING (READ OMM) | |
| 14. | 255-0794 | [1] | FILM-WARNING (SEAT BELT) | |
| 15. | 261-9644 | [1] | COVER AS (CONTROLS, FRONT, LOWER) | |
| 206-1667 | [1] | CLIP (TRIM) | ||
| 16. | 261-9645 | [1] | COVER AS (CONTROLS, FRONT, UPPER) | |
| 206-1667 | [4] | CLIP (TRIM) | ||
| 17. | 269-9115 | [1] | COVER AS (FENDER, FRONT) | |
| 172-8591 M | [1] | NUT-CLIP (M6X1-THD) | ||
| 18. | 293-1980 E | SEAL (73-CM) | ||
| 18A. | 293-1980 E | SEAL (77.5-CM) | ||
| 19. | [1] | FILM-IDENTIFICATION (FUSE PANEL) | ||
| 20. | 336-7533 | [1] | PANEL AS-GAUGE | |
| 206-1667 | [2] | CLIP (TRIM) | ||
| 21. | 337-5351 | [1] | FILM-INSTRUCTION (START SWITCH) | |
| 22. | 9X-2038 | [5] | WASHER (7X19X2-MM THK) | |
| 23. | 9X-2045 M | [16] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50750714
331-9945: CONTROL GP-HYDRAULIC HAND
331-9945 CONTROL GP-HYDRAULIC HAND -LOADER
S/N DPH1-UP
PART OF 332-7955, 332-7958 VALVE AR-BANK 3
AN ATTACHMENT
S/N DPH1-UP
PART OF 332-7955, 332-7958 VALVE AR-BANK 3
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6600 E | SEAL (7-CM) | ||
| 2. | 2R-0364 | [5] | RING-RETAINING | |
| 3. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4743 | [3] | PIN | |
| 6. | 8T-4773 | [5] | BALL JOINT | |
| 7. | 9R-1765 | [1] | COVER-TOP | |
| 8. | 9R-1766 | [1] | COVER-BOTTOM | |
| 9. | 9R-1767 | [1] | BOOT | |
| 10. | 9R-9868 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(1-M EACH) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M) | |||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (NEUTRALIZER) | ||
| 11. | 091-1745 | [6] | WASHER (16.6X24X1.2-MM THK) | |
| 12. | 1D-5120 | [1] | NUT-JAM (3/4-16-THD) | |
| 13. | 119-4167 | [1] | ROD | |
| 14. | 164-1368 | [12] | FASTENER (CLIP) | |
| 15. | 164-1395 | [1] | KNOB (GOVERNOR CONTROL) | |
| 16. | 183-3134 | [2] | BEARING | |
| 17. | 206-1668 | [1] | BOOT | |
| 18. | 220-0269 | [1] | SHAFT | |
| 19. | 270-2795 | [1] | PLATE | |
| 20. | 291-5108 | [1] | GASKET | |
| 21. | 365-2913 | [1] | BRACKET AS | |
| 22. | 330-6987 | [1] | LEVER AS-VALVE | |
| 22A. | 183-3136 | [1] | BUSHING | |
| 23. | 330-6988 | [1] | PIN | |
| 24. | 330-6994 | [1] | ROD | |
| 25. | 330-6996 | [1] | ROD | |
| 26. | 330-7002 | [1] | LEVER AS-VALVE | |
| 26A. | 183-3134 | [2] | BEARING | |
| 27. | 331-4360 | [1] | ROD | |
| 28. | 399-7025 | [1] | PIN | |
| 29. | 333-8324 | [1] | JOINT AS | |
| 29A. | 183-3136 | [1] | BUSHING | |
| 30. | 365-2915 | [1] | PIN AS | |
| 31. | 352-8367 | [1] | PLATE | |
| 33. | 5H-3193 | [1] | PIN-SPRING | |
| 34. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 35. | 6V-7744 M | [7] | LOCKNUT (M10X1.5-THD) | |
| 36. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 37. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 39. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 40. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 41. | 8T-4815 | [3] | ROD END | |
| 42. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 43. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 44. | 251-5626 | [1] | FILM-INSTRUCTION (BUCKET CONTROL) | |
| 45. | 7X-0579 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 46. | 7X-0818 M | [1] | BOLT (M8X1.25X45-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50750715
333-4391: CONTROL GP-HYDRAULIC HAND
333-4391 CONTROL GP-HYDRAULIC HAND -4-FUNCTION, STANDARD
S/N DPH1-UP
PART OF 353-6921, 353-6922, 365-5322, 365-5323 DISTRIBUTION AR
AN ATTACHMENT
S/N DPH1-UP
PART OF 353-6921, 353-6922, 365-5322, 365-5323 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6431 | [4] | ROD END | |
| 2. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 3. | 164-1361 | [2] | BOOT | |
| 4. | 164-1371 | [2] | PLATE | |
| 5. | 164-1399 | [2] | KNOB | |
| 6. | 190-5134 | [2] | FILM-IDENTIFICATION (STD CROSS PATTERN) | |
| 7. | 206-1672 | [1] | CONSOLE | |
| 8. | 206-1673 | [1] | CONSOLE AS | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 10. | 335-3820 | [1] | TOWER AS | |
| 11. | 338-3578 | [4] | ROD | |
| 12. | 338-9495 | [4] | BALL JOINT | |
| 13. | 338-9496 | [1] | BRACKET AS (LH) | |
| 14. | 338-9497 | [1] | BRACKET AS (RH) | |
| 15. | 341-7143 | [1] | MAT | |
| 16. | 343-4847 | [1] | LEVER AS (RH) | |
| 17. | 343-4848 | [1] | LEVER AS (LH) | |
| 18. | 9R-2807 | [4] | CLIP (RETAINER) | |
| 19. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 21. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 22. | 206-1766 | [4] | PIN | |
| 23. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 8T-4908 M | [6] | BOLT (M8X1.25X25-MM) | |
| 26. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 27. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
#SEBP50750716
334-3569: CONTROL GP-HYDRAULIC HAND
334-3569 CONTROL GP-HYDRAULIC HAND -LOADER
S/N DPH1-449
PART OF 332-7953 CONTROL AR-BACKHOE
AN ATTACHMENT
S/N DPH1-449
PART OF 332-7953 CONTROL AR-BACKHOE
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6600 E | SEAL (7-CM) | ||
| 2. | 2R-0364 | [5] | RING-RETAINING | |
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4743 | [2] | PIN | |
| 6. | 8T-4773 | [4] | BALL JOINT | |
| 7. | 9R-1765 | [1] | COVER-TOP | |
| 8. | 9R-1766 | [1] | COVER-BOTTOM | |
| 9. | 9R-1767 | [1] | BOOT | |
| 10. | 9R-9868 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 5P-5677 D | WIRE (18-GA, BLACK)(2-M) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M) | |||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 091-1745 | [5] | WASHER (16.6X24X1.2-MM THK) | |
| 12. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 13. | 119-4167 | [1] | ROD | |
| 14. | 164-1368 | [12] | FASTENER (CLIP) | |
| 15. | 206-1695 | [1] | BOOT | |
| 16. | 220-0269 | [1] | SHAFT | |
| 17. | 270-2795 | [1] | PLATE | |
| 18. | 291-5108 | [1] | GASKET | |
| 19. | 330-6982 | [1] | BRACKET AS | |
| 20. | 330-6988 | [1] | PIN | |
| 21. | [2] | LEVER | ||
| 22. | [1] | PIN | ||
| 23. | 330-6996 | [1] | ROD | |
| 24. | 330-7002 | [1] | LEVER AS-VALVE | |
| 25. | 331-4360 | [1] | ROD | |
| 26. | 333-8324 | [1] | JOINT AS | |
| 27. | 110-7595 | [2] | PIN-SPRING | |
| 28. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 29. | 5H-3193 | [1] | PIN-SPRING | |
| 30. | 6V-7744 M | [6] | LOCKNUT (M10X1.5-THD) | |
| 31. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 32. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 33. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 34. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 35. | 8T-4815 | [2] | ROD END | |
| 36. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 37. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50750717
334-3569: CONTROL GP-HYDRAULIC HAND
334-3569 CONTROL GP-HYDRAULIC HAND -LOADER
S/N DPH450-UP
PART OF 332-7953 CONTROL AR-BACKHOE
AN ATTACHMENT
S/N DPH450-UP
PART OF 332-7953 CONTROL AR-BACKHOE
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6600 E | SEAL (7-CM) | ||
| 2. | 2R-0364 | [5] | RING-RETAINING | |
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4743 | [2] | PIN | |
| 6. | 8T-4773 | [4] | BALL JOINT | |
| 7. | 9R-1765 | [1] | COVER-TOP | |
| 8. | 9R-1766 | [1] | COVER-BOTTOM | |
| 9. | 9R-1767 | [1] | BOOT | |
| 10. | 9R-9868 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER) | |
| 5P-5677 D | WIRE (18-GA, BLACK)(1-M EACH) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M) | |||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (NEUTRALIZER) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 091-1745 | [5] | WASHER (16.6X24X1.2-MM THK) | |
| 12. | 1D-5120 | [1] | NUT-JAM (3/4-16-THD) | |
| 13. | 119-4167 | [1] | ROD | |
| 14. | 164-1368 | [12] | FASTENER (CLIP) | |
| 15. | 206-1695 | [1] | BOOT | |
| 16. | 220-0269 | [1] | SHAFT | |
| 17. | 270-2795 | [1] | PLATE | |
| 18. | 291-5108 | [1] | GASKET | |
| 19. | 365-2913 | [1] | BRACKET AS | |
| 20. | 330-6988 | [1] | PIN | |
| 23. | 330-6996 | [1] | ROD | |
| 24. | 330-7002 | [1] | LEVER AS-VALVE | |
| 24A. | 183-3134 | [2] | BEARING | |
| 25. | 331-4360 | [1] | ROD | |
| 26. | 333-8324 | [1] | JOINT AS | |
| 26A. | 183-3136 | [1] | BUSHING | |
| 28. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 29. | 5H-3193 | [1] | PIN-SPRING | |
| 30. | 6V-7744 M | [6] | LOCKNUT (M10X1.5-THD) | |
| 31. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 32. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 33. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 34. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 35. | 8T-4815 | [2] | ROD END | |
| 36. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 37. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 38. | 365-2915 | [1] | PIN AS | |
| 39. | 352-8367 | [1] | PLATE | |
| 40. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 41. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 42. | 183-3134 | [2] | BEARING | |
| 43. | [2] | PLUG AS | ||
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 9S-4183 | [1] | PLUG (1-1/16-12-THD) | ||
| 44. | 251-5625 | [1] | FILM-INSTRUCTION (BUCKET CONTROL) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50750718
337-6256: CONTROL GP-HYDRAULIC HAND
337-6256 CONTROL GP-HYDRAULIC HAND -EXCAVATOR PATTERN
S/N DPH1-UP
PART OF 354-7007 KIT-CONVERSION
AN ATTACHMENT
S/N DPH1-UP
PART OF 354-7007 KIT-CONVERSION
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4743 | [4] | PIN | |
| 2. | 8T-4773 | [8] | BALL JOINT | |
| 3. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 4. | 142-7405 | [2] | COLLAR | |
| 5. | 164-1361 | [2] | BOOT | |
| 6. | 164-1371 | [2] | PLATE | |
| 7. | 164-1399 | [2] | KNOB | |
| 8. | 164-1421 | [1] | PLATE | |
| 9. | 164-1422 | [1] | SHAFT AS | |
| 10. | 164-1425 | [1] | COUPLER AS | |
| 11. | 164-1429 | [1] | COUPLER AS | |
| 12. | 164-1435 | [2] | PLATE | |
| 13. | 164-1438 | [2] | ROD | |
| 14. | 170-6312 | [4] | BEARING | |
| 15. | 190-5128 | [1] | FILM-INSTRUCTION (EXCAVATOR CONTROL) | |
| 16. | 206-1672 | [1] | CONSOLE | |
| 17. | 206-1673 | [1] | CONSOLE AS | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 18. | 231-2872 | [1] | LEVER AS (RH) | |
| 19. | 231-2873 | [1] | LEVER AS (LH) | |
| 20. | 331-4335 | [1] | TOWER AS | |
| 21. | 337-6245 | [1] | ROD | |
| 22. | 337-6246 | [2] | ROD | |
| 23. | 337-6247 | [1] | ROD | |
| 24. | 343-0528 | [1] | MAT | |
| 25. | 164-1402 | [2] | SLEEVE | |
| 26. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 27. | 6V-7744 M | [12] | LOCKNUT (M10X1.5-THD) | |
| 28. | 6V-8932 M | [2] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 29. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 30. | 8T-4121 | [21] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4133 M | [16] | NUT (M10X1.5-THD) | |
| 32. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 33. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 34. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 35. | 8T-4815 | [4] | ROD END | |
| 36. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 37. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 38. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 39. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP50750719
231-2879: CONTROL GP-HYDRAULIC LOCKOUT
231-2879 CONTROL GP-HYDRAULIC LOCKOUT -PEDAL, BACKHOE
S/N DPH1-UP
PART OF 343-0654 CONVERSION AR-ROADING
AN ATTACHMENT
S/N DPH1-UP
PART OF 343-0654 CONVERSION AR-ROADING
AN ATTACHMENT
For full view, you need register
