BASIC ENGINE
CRANKSHAFT GPCYLINDER BLOCK GP
BASIC ENGINE
CRANKSHAFT GP
#SEBP50760040
326-9000: CRANKSHAFT GP
326-9000 CRANKSHAFT GP
S/N C4Z1-777
PART OF 321-7704, 321-7705 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N C4Z1-777
PART OF 321-7704, 321-7705 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 2. | 232-7400 JY | [1] | CRANKSHAFT GP (WITH SPLINE)(CONNECTING ROD, 63.48-MM DIA) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 274-4716 | [1] | KIT-CRANKSHAFT | ||
| J | CHECK CONNECTING ROD JOURNAL TO ENSURE THIS IS THE CORRECT CRANKSHAFT | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50760041
326-9000: CRANKSHAFT GP
326-9000 CRANKSHAFT GP
S/N C4Z778-UP
PART OF 321-7704, 321-7705 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N C4Z778-UP
PART OF 321-7704, 321-7705 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 2. | 359-0715 CJY | [1] | CRANKSHAFT GP (W/O SPLINE)(CONNECTING ROD, 68-MM DIA) | |
| 3. | 067-6135 C | [1] | KEY-WOODRUFF | |
| AVAILABLE REPAIR KIT(S): | ||||
| 364-2829 Y | [1] | CRANKSHAFT GP | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | CHECK CONNECTING ROD JOURNAL TO ENSURE THIS IS THE CORRECT CRANKSHAFT | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50760042
334-4203: CRANKSHAFT GP
334-4203 CRANKSHAFT GP
S/N CRS1-59947
PART OF 322-1923, 322-1924 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-59947
PART OF 322-1923, 322-1924 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS#SEBP50760043
334-4203: CRANKSHAFT GP
334-4203 CRANKSHAFT GP
S/N CRS59948-UP
PART OF 322-1923, 322-1924 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS59948-UP
PART OF 322-1923, 322-1924 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 2. | 359-0715 CJY | [1] | CRANKSHAFT GP (W/O SPLINE)(CONNECTING ROD, 68-MM DIA) | |
| 3. | 067-6135 C | [1] | KEY-WOODRUFF | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | CHECK CONNECTING ROD JOURNAL TO ENSURE THIS IS THE CORRECT CRANKSHAFT | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50760044
359-0715: CRANKSHAFT GP
359-0715 CRANKSHAFT GP
S/N CRS59948-UP; C4Z778-UP
W/O SPLINE
PART OF 326-9000, 334-4203 CRANKSHAFT GP
Type 1
AN ATTACHMENT
S/N CRS59948-UP; C4Z778-UP
W/O SPLINE
PART OF 326-9000, 334-4203 CRANKSHAFT GP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 032-9090 | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 2. | 032-9091 | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 3. | 353-7423 | [1] | KIT-BEARING (MAIN) | |
| 233-3786 AB | KIT-CRANKSHAFT BEARING (0.75-MM US) | |||
| 353-7424 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7425 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7426 AB | KIT-BEARING (0.75-MM US) | |||
| 4. | 360-3986 | [1] | KIT-BEARING (CONNECTING ROD)(STANDARD) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP50760045
359-0715: CRANKSHAFT GP
359-0715 CRANKSHAFT GP
S/N CRS59948-UP; C4Z778-UP
W/O SPLINE
PART OF 326-9000, 334-4203 CRANKSHAFT GP
Type 2
AN ATTACHMENT
S/N CRS59948-UP; C4Z778-UP
W/O SPLINE
PART OF 326-9000, 334-4203 CRANKSHAFT GP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | JP | [2] | PLATE-THRUST (STANDARD) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 2. | JP | [2] | PLATE-THRUST (STANDARD) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 3. | 518-5437 C | [1] | KIT-BEARING (MAIN) | |
| 518-5440 ABC | KIT-BEARING (0.254-MM US) | |||
| 518-5441 ABC | KIT-BEARING (0.508-MM US) | |||
| 518-5885 ABC | KIT-BEARING (0.762-MM US) | |||
| 4. | 360-3986 | [1] | KIT-BEARING (CONNECTING ROD)(STANDARD) | |
| 468-7762 AB | KIT-BEARING (0.254-MM US) | |||
| 468-7769 AB | KIT-BEARING (0.508-MM US) | |||
| 468-7770 AB | KIT-BEARING (0.762-MM US) | |||
| AVAILABLE REPAIR KIT(S): | ||||
| 518-5891 J | [1] | KIT-WASHER (STANDARD) | ||
| (INCLUDES WASHERS) | ||||
| 518-5892 AB | KIT-WASHER (0.191-MM US) | |||
| (INCLUDES WASHERS) | ||||
| 518-5893 ABP | KIT-WASHER (STANDARD, 0.191-MM US) | |||
| (INCLUDES WASHERS) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| P | KIT MARKED P SERVICES PART(S) MARKED P | |||
#SEBP50760046
364-2829: CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 1
AN ATTACHMENT
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 2. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 3. | 353-2205 B | [1] | KIT-ROD BEARING | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 353-7423 B | [1] | KIT-BEARING (MAIN) | |
| 353-7424 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7425 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7426 AB | KIT-BEARING (0.75-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP50760047
364-2829: CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 2
AN ATTACHMENT
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 2. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 518-5437 BC | [1] | KIT-BEARING (STANDARD) | |
| 518-5440 ABC | KIT-BEARING (0.254-MM US)(0.254-MM US) | |||
| 518-5441 ABC | KIT-BEARING (0.508-MM US)(0.50-MM US) | |||
| 518-5885 ABC | KIT-BEARING (0.762-MM US)(0.75-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP50760048
364-2829: CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 3
AN ATTACHMENT
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | BC | [2] | PLATE-THRUST (STANDARD)(UPPER) | |
| 518-5891 BC | [2] | KIT-WASHER (STANDARD) | ||
| 518-5892 ABC | KIT-WASHER (0.191-MM US) | |||
| 518-5893 ABC | KIT-WASHER (STANDARD, 0.191-MM US) | |||
| 2. | BC | [2] | PLATE-THRUST (STANDARD)(LOWER) | |
| 518-5891 BC | [2] | KIT-WASHER (STANDARD) | ||
| 518-5892 ABC | KIT-WASHER (0.191-MM US) | |||
| 518-5893 ABC | KIT-WASHER (STANDARD, 0.191-MM US) | |||
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 518-5437 B | [1] | KIT-BEARING (STANDARD) | |
| 518-5440 AB | KIT-BEARING (0.254-MM US)(0.254-MM US) | |||
| 518-5441 AB | KIT-BEARING (0.508-MM US)(0.50-MM US) | |||
| 518-5885 AB | KIT-BEARING (0.762-MM US)(0.75-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP50760049
232-7604: CYLINDER BLOCK GP
232-7604 CYLINDER BLOCK GP
S/N CRS1-UP
PART OF 334-4202 CYLINDER BLOCK GP
AN ATTACHMENT
S/N CRS1-UP
PART OF 334-4202 CYLINDER BLOCK GP
AN ATTACHMENT
For full view, you need register
Parts for your 442E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0572 M | [4] | BOLT (M8X1.25X20-MM) | |
| 2. | 035-8068 | [10] | BOLT (5/8-18X3.75-IN) | |
| 3. | 067-6002 | [10] | DOWEL | |
| 4. | 067-6006 | [1] | PLUG | |
| 5. | 067-6043 | [1] | PLUG-SIDE | |
| 6. | 100-4841 M | [4] | BOLT (M6X1X10-MM) | |
| 7. | 185-0884 | [2] | DOWEL | |
| 8. | 225-7944 | [1] | GASKET (ENGINE OIL FILTER BASE) | |
| 9. | 225-8858 | [2] | PLUG | |
| 10. | 232-3751 | [1] | PLATE | |
| 11. | 232-7440 | [1] | BEARING | |
| 12. | 276-5605 | [4] | JET AS-PISTON COOLING | |
| 13. | 232-7596 | [1] | PLUG | |
| 14. | 232-7597 | [2] | PLUG | |
| 15. | 232-7599 | [1] | PLUG | |
| 16. | 232-7600 | [1] | PLUG-CUP | |
| 17. | 232-7603 | [1] | PLUG | |
| M | METRIC PART | |||
Information:
BASIC ENGINE
CRANKSHAFT GP
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Crankshaft Pulley - Remove and Install - Engines Without an Automatic Belt Tensioner
C4.4 (Mech) Engines for Caterpillar Built Machines
C4.4 (Mech) Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install - Engines With an Automatic Belt Tensioner
C4.4 (Mech) Engines for Caterpillar Built Machines
C4.4 (Mech) Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Front) - Remove and Install
C4.4 (Mech) Engines for Caterpillar Built Machines
C4.4 (Mech) Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C4.4 (Mech) Engines for Caterpillar Built Machines
C4.4 (Mech) Engines for Caterpillar Built Machines
