ELECTRICAL AND STARTING SYSTEM
WIRING GPBRAKING SYSTEM
BRAKE GPPOWER TRAIN
TRANSMISSION GPCLUTCH GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP50770210
311-3639: WIRING GP-WIPER
311-3639 WIRING GP-WIPER -REAR
S/N NBA1-UP
PART OF 315-1270 WINDOW GP-CAB
AN ATTACHMENT
S/N NBA1-UP
PART OF 315-1270 WINDOW GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 444E BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 206-1345 | [3] | STRAP-CABLE | |
| 2. | 311-1218 | [1] | HARNESS AS-WINDOW WIPER | |
| 266-4157 | [7] | SLEEVE-BRAIDED | ||
| 266-2814 E | CONDUIT-FLEXIBLE (9.52-MM ID)(141-CM) | |||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [2] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [2] | WIRE AS (14-GA) | ||
| 141-8061 B | TAPE | |||
| 3. | 308-3074 | [4] | CLIP | |
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4171 M | [4] | BOLT (M6X1X12-MM) | |
| 6. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50770211
211-4258: WIRING GP-WORK TOOL
For full view, you need register
Parts for your 444E BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 159-9495 | [1] | NUT (1-1/2-18-THD) | |
| 2. | 159-9496 | [1] | LOCKWASHER | |
| 3. | 211-9461 | [1] | HARNESS AS-WIRING (ANGLE BROOM) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7781 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-7782 | [1] | HOUSING-PLUG (14-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9G-2265 | [1] | CLIP | ||
| 9G-3695 | [3] | PLUG-SEAL | ||
| 186-3736 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 156-1458 | [1] | COVER | ||
| 156-1460 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 4. | 212-7038 | [1] | BRACKET | |
| 5. | 214-4705 | [1] | SWITCH AS-ROCKER (ANGLE BROOM) | |
| 111-7899 | [1] | GASKET | ||
| 6. | 3S-2093 | [2] | STRAP-CABLE | |
| 7. | 4P-7581 | [1] | CLIP (LADDER) | |
| 8. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50770212
296-0376: WIRING GP-WORK TOOL
296-0376 WIRING GP-WORK TOOL
S/N NBA1-UP
PART OF 332-7952 CONVERSION AR-QUICK COUPLER, 332-7963 VALVE AR-BANK 3
AN ATTACHMENT
S/N NBA1-UP
PART OF 332-7952 CONVERSION AR-QUICK COUPLER, 332-7963 VALVE AR-BANK 3
AN ATTACHMENT
For full view, you need register
Parts for your 444E BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-3158 | [5] | SUPPRESSOR-ARC | |
| 2. | 213-6077 | [1] | HARNESS AS-FRONT (LOADER) | |
| 5P-0767 E | HOSE (541-CM) | |||
| 9X-3401 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 3. | 214-4706 | [1] | SWITCH AS-ROCKER (AUXILIARY HYDRAULIC FLOW) | |
| 4. | 214-4707 | [1] | SWITCH AS-ROCKER (ELECTRIC POWER) | |
| 5. | 214-4708 | [1] | SWITCH AS-ROCKER (QUICK COUPLER PIN LOCK) | |
| (EACH SWITCH AS-ROCKER INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 6. | 296-0375 | [1] | HARNESS AS-CAB (PLATFORM) | |
| 228-5856 | [4] | CONNECTOR (10-PIN) | ||
| 9X-3401 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [16] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 141-8061 B | TAPE | |||
| 122-4401 | [3] | TERMINAL | ||
| 091-2436 | [16] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 9X-1055 | [2] | TERMINAL-RECEPTACLE (12-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 7. | 115-1615 | [1] | RELAY AS (12-VOLT)(QUICK COUPLER) | |
| 8. | 3S-2093 | [36] | STRAP-CABLE | |
| 9. | 3S-8665 | [2] | CLIP (LOOP) | |
| 10. | 149-7372 E | SLEEVE-ABRASION (55-CM) | ||
| 11. | 6V-0744 E | GUARD-HOSE (65-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP50770213
216-9083: AXLE GP-DRIVE & STEERING
216-9083 AXLE GP-DRIVE & STEERING -FRONT
S/N NBA1-UP
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N NBA1-UP
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 444E BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-0639 | [4] | SCREW-FLAT HEAD (M8X1.25X20-MM) | |
| 3. | 219-8798 | [2] | SEAL-LIP TYPE | |
| 4. | 219-8795 | [1] | CAP (PLASTIC) | |
| 5. | 198-7811 | [2] | DOWEL | |
| 6. | 198-7815 | [2] | BUSHING (TRUMPET) | |
| 7. | 152-6144 | [3] | PLUG AS-DRAIN (MAGNETIC)(AXLE, FRONT) | |
| (EACH INCLUDES) | ||||
| 6V-6228 | [1] | SEAL-O-RING | ||
| 8. | 199-0677 | [9] | BOLT (M14X2X40-MM) | |
| 9. | 199-0683 M | [8] | BOLT (M16X2X38-MM) | |
| 10. | 198-7822 | [2] | SEAL | |
| 11. | 199-0783 M | [8] | BOLT (M16X2X38-MM) | |
| 12. | 198-7835 M | [2] | NUT-TIE ROD (M27X1.5-THD) | |
| 13. | 213-4227 | [2] | RETAINER | |
| 14. | 213-4223 | [2] | WASHER (57X66X8.5-MM THK) | |
| 15. | 216-7473 | [2] | PIN AS | |
| (EACH INCLUDES) | ||||
| 198-7823 | [1] | BEARING AS | ||
| 198-7825 | [1] | SEAL | ||
| 198-7838 | [1] | PIN | ||
| 16. | 216-7474 | [2] | PIN AS (LOWER) | |
| (EACH INCLUDES) | ||||
| 198-7826 | [1] | SEAL | ||
| 198-7839 | [1] | PIN | ||
| 217-0049 | [1] | BEARING | ||
| 17. | 213-4225 | [2] | WASHER-THRUST | |
| 18. | 238-5275 | [1] | BEAM | |
| 19. | 238-5286 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | |
| 20. | 238-5296 J | [1] | SHAFT GP-AXLE (LH) | |
| 21. | 238-5297 J | [1] | SHAFT GP-AXLE (RH) | |
| (EACH SHAFT GP INCLUDES) | ||||
| 238-5229 | [1] | YOKE | ||
| 238-5241 | [1] | SHAFT | ||
| 22. | 238-5277 Y | [1] | HOUSING & FLANGE GP-AXLE (LH) | |
| 23. | 238-5278 Y | [1] | HOUSING & FLANGE GP-AXLE (RH) | |
| 24. | 238-5276 Y | [2] | PLANETARY GP-FINAL DRIVE | |
| 25. | 253-5024 | [1] | BREATHER (FRONT AXLE) | |
| 26. | 199-0662 | [2] | SEAL-O-RING | |
| 27. | 154-5404 | [2] | BEARING | |
| 28. | 1U-8846 B | SEALANT-GASKET | ||
| 29. | 238-5285 L | [1] | CYLINDER GP-STEERING | |
| 280-7014 | [2] | CYLINDER HEAD | ||
| 280-7015 | [1] | ROD | ||
| 30. | 238-5236 | [1] | TIE ROD AS | |
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 316-1923 | [1] | TIE ROD | ||
| 316-1924 | [1] | BALL JOINT | ||
| 31. | 238-5237 | [1] | TIE ROD AS | |
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 316-1924 | [1] | BALL JOINT | ||
| 316-1928 | [1] | TIE ROD | ||
| 32. | 198-7841 B | [4] | SHIM (0.15-MM THK) | |
| 33. | 198-7842 B | [4] | SHIM (0.2-MM THK) | |
| 34. | 198-7843 B | [4] | SHIM (0.5-MM THK) | |
| 35. | 212-4678 | [6] | WASHER-HARD (20.5X36.5X5-MM THK) | |
| 36. | 290-4164 M | [6] | BOLT (M20X1.5X80-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 238-5230 J | KIT-SPIDER | |||
| (INCLUDES SPIDER & 4-RETAINING RINGS) | ||||
| 280-7013 L | [1] | KIT-SEAL | ||
| (INCLUDES RINGS, ROD SEALS, WASHER, WIPER ROD & PISTON SEAL) | ||||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50770214
315-2318: AXLE GP-DRIVE & STEERING
315-2318 AXLE GP-DRIVE & STEERING -REAR
S/N NBA1-262
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N NBA1-262
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 444E BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-0652 | [2] | CLIP (PIN) | |
| 2. | 219-8795 | [1] | CAP (PLASTIC) | |
| 3. | 199-0668 | [2] | BUSHING | |
| 4. | 197-9155 | [1] | BREATHER (AXLE, REAR) | |
| 5. | 198-7811 | [2] | DOWEL | |
| 6. | 198-7815 | [2] | BUSHING | |
| 7. | 152-6144 | [4] | PLUG AS-DRAIN (MAGNETIC)(AXLE, REAR) | |
| 8. | 199-0676 | [2] | SPRING | |
| 9. | 199-0679 M | [2] | BOLT (M16X2X95-MM) | |
| 10. | 199-0683 M | [16] | BOLT (M16X2X38-MM) | |
| 11. | 199-0706 | [1] | PISTON | |
| 12. | 198-7822 | [2] | SEAL | |
| 13. | 198-7835 M | [2] | NUT-TIE ROD (M27X1.5-THD) | |
| 14. | 210-3106 | [1] | BRACKET | |
| 15. | 213-4227 | [2] | RETAINER | |
| 16. | 212-5713 | [2] | PLUG AS | |
| 17. | 213-4223 | [2] | WASHER (57X66X8.5-MM THK) | |
| 18. | 216-1610 Y | [2] | PLANETARY GP-FINAL DRIVE (AXLE) | |
| 19. | 216-7473 | [2] | PIN AS | |
| (EACH INCLUDES) | ||||
| 198-7823 | [1] | BEARING AS | ||
| 198-7825 | [1] | SEAL | ||
| 198-7838 | [1] | PIN | ||
| 20. | 216-7474 | [2] | PIN AS (LOWER) | |
| (EACH INCLUDES) | ||||
| 198-7826 | [1] | SEAL | ||
| 198-7839 | [1] | PIN | ||
| 217-0049 | [1] | BEARING | ||
| 21. | 213-4225 | [2] | WASHER-THRUST | |
| 22. | 216-7476 Y | [1] | HOUSING & FLANGE GP-AXLE (RH) | |
| 23. | 216-7477 Y | [1] | HOUSING & FLANGE GP-AXLE (LH) | |
| 24. | 217-2914 | [1] | COVER (DIFFERENTIAL LOCK) | |
| 25. | 231-0699 | [1] | COVER (DIFFERENTIAL LOCK) | |
| 26. | 219-8839 | [1] | ROD | |
| 27. | 174-4647 | [1] | BUSHING | |
| 28. | 174-4650 | [1] | SPACER (20X32X8-MM THK) | |
| 29. | 316-1926 | [2] | DISC AS-BRAKE | |
| (EACH INCLUDES) | ||||
| 199-0786 | [4] | PLATE | ||
| 199-0787 | [3] | PIN | ||
| 238-5291 | [3] | DISC-BRAKE | ||
| 238-5292 | [1] | HUB-BRAKE | ||
| 30. | 312-7617 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 226-4355 | [2] | SPIDER (15-TEETH) | ||
| 226-4356 | [1] | SHAFT | ||
| 226-4357 | [1] | YOKE | ||
| 312-7618 | [1] | SHAFT-AXLE | ||
| 31. | 316-1925 Y | [1] | HOUSING GP-AXLE (REAR) | |
| 32. | 253-4979 | [1] | HOUSING-AXLE (RH) | |
| 33. | 253-4980 | [1] | HOUSING-AXLE (LH) | |
| 34. | 238-5236 | [1] | TIE ROD AS | |
| 35. | 238-5237 | [1] | TIE ROD AS | |
| 36. | 238-5238 Y | [1] | CYLINDER GP-STEERING | |
| 37. | 8T-0292 M | [2] | BOLT (M8X1.25X90-MM) | |
| 38. | 222-7108 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 39. | 8C-7505 M | [4] | SCREW-FLAT HEAD (M8X1.25X20-MM) | |
| 40. | 6V-3940 M | [2] | BOLT (M8X1.25X25-MM) | |
| 41. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 42. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 43. | 095-9805 M | [3] | BOLT-SOCKET HEAD (M14X2X40-MM) | |
| 44. | 4F-9029 | [2] | SEAL | |
| 45. | 9X-7684 | [2] | SEAL-O-RING | |
| 46. | 5H-4909 | [2] | SEAL-O-RING | |
| 47. | 130-7282 | [1] | BRACKET | |
| 48. | 259-0127 | [1] | BRAKE GP-MECH CALIPER PARKING | |
| 166-9413 | [1] | KIT-CAM (COUNTERCLOCKWISE) | ||
| (INCLUDES CAMS, BALL BEARINGS & RETAINER RING) | ||||
| 259-0128 | [1] | KIT-BRAKE LINING | ||
| (INCLUDES LINING AS & SPRING) | ||||
| 259-0129 | [1] | KIT-BRAKE CALIPER | ||
| (INCLUDES SLEEVES, WASHERS, NUT-HEXES, BOOTS, SPRINGS, SPACERS & O-RINGS) | ||||
| 49. | 7X-2559 M | [26] | BOLT (M16X2X160-MM) | |
| 51. | 1U-8846 B | [1] | SEALANT-GASKET | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50770215
315-2318: AXLE GP-DRIVE & STEERING
315-2318 AXLE GP-DRIVE & STEERING -REAR
S/N NBA263-UP
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N NBA263-UP
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 444E BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-0652 | [2] | CLIP (PIN) | |
| 2. | 219-8795 | [1] | CAP (PLASTIC) | |
| 3. | 199-0668 | [2] | BUSHING | |
| 4. | 197-9155 | [1] | BREATHER (AXLE, REAR) | |
| 5. | 198-7811 | [2] | DOWEL | |
| 6. | 198-7815 | [2] | BUSHING | |
| 7. | 152-6144 | [4] | PLUG AS-DRAIN (MAGNETIC)(AXLE, REAR) | |
| (EACH INCLUDES) | ||||
| 6V-6228 | [1] | SEAL-O-RING | ||
| 8. | 199-0676 | [2] | SPRING | |
| 9. | 199-0679 M | [2] | BOLT (M16X2X95-MM) | |
| 10. | 199-0683 M | [16] | BOLT (M16X2X38-MM) | |
| 11. | 199-0706 | [1] | PISTON | |
| 12. | 399-4733 | [2] | SEAL | |
| 13. | 198-7835 M | [2] | NUT-TIE ROD (M27X1.5-THD) | |
| 14. | 210-3106 | [1] | BRACKET | |
| 15. | 213-4227 | [2] | RETAINER | |
| 16. | 212-5713 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 033-6041 | [1] | SEAL-O-RING | ||
| 17. | 213-4223 | [2] | WASHER (57X66X8.5-MM THK) | |
| 18. | 216-1610 Y | [2] | PLANETARY GP-FINAL DRIVE (AXLE) | |
| 19. | 216-7473 | [2] | PIN AS | |
| (EACH INCLUDES) | ||||
| 3N-4968 | [1] | CONE-BEARING | ||
| 6D-1734 | [1] | CUP-BEARING | ||
| 198-7825 | [1] | SEAL | ||
| 198-7838 | [1] | PIN | ||
| 20. | 216-7474 | [2] | PIN AS (LOWER) | |
| (EACH INCLUDES) | ||||
| 198-7826 | [1] | SEAL | ||
| 198-7839 | [1] | PIN | ||
| 217-0049 | [1] | BEARING | ||
| 21. | 213-4225 | [2] | WASHER-THRUST | |
| 22. | 216-7476 Y | [1] | HOUSING & FLANGE GP-AXLE (RH) | |
| 23. | 216-7477 Y | [1] | HOUSING & FLANGE GP-AXLE (LH) | |
| 24. | 217-2914 | [1] | COVER (DIFFERENTIAL LOCK) | |
| 25. | 231-0699 | [1] | COVER (DIFFERENTIAL LOCK) | |
| 26. | 219-8839 | [1] | ROD | |
| 27. | 174-4647 | [1] | BUSHING | |
| 28. | 174-4650 | [1] | SPACER (20X32X8-MM THK) | |
| 29. | 316-1926 | [2] | DISC AS-BRAKE | |
| (EACH INCLUDES) | ||||
| 199-0786 | [4] | PLATE | ||
| 199-0787 | [3] | PIN | ||
| 238-5291 | [3] | DISC-BRAKE | ||
| 238-5292 | [1] | HUB-BRAKE | ||
| 30. | 312-7617 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 226-4355 | [2] | SPIDER (15-TEETH) | ||
| 226-4356 | [1] | SHAFT | ||
| 226-4357 | [1] | YOKE | ||
| 31. | 316-1925 Y | [1] | HOUSING GP-AXLE (REAR) | |
| 32. | 253-4979 | [1] | HOUSING-AXLE (RH) | |
| 33. | 253-4980 | [1] | HOUSING-AXLE (LH) | |
| 34. | 238-5236 | [1] | TIE ROD AS | |
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 316-1923 | [1] | TIE ROD | ||
| 316-1924 | [1] | BALL JOINT | ||
| 35. | 238-5237 | [1] | TIE ROD AS | |
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 316-1924 | [1] | BALL JOINT | ||
| 316-1928 | [1] | TIE ROD | ||
| 36. | 238-5238 Y | [1] | CYLINDER GP-STEERING | |
| 37. | 8T-0292 M | [2] | BOLT (M8X1.25X90-MM) | |
| 38. | 222-7108 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 39. | 8C-7505 M | [4] | SCREW-FLAT HEAD (M8X1.25X20-MM) | |
| 40. | 6V-3940 M | [2] | BOLT (M8X1.25X25-MM) | |
| 41. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 42. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 43. | 095-9805 M | [3] | BOLT-SOCKET HEAD (M14X2X40-MM) | |
| 44. | 4F-9029 | [2] | SEAL | |
| 45. | 4D-3107 | [2] | SEAL-O-RING | |
| 46. | 5H-4909 | [2] | SEAL-O-RING | |
| 47. | 130-7282 | [1] | BRACKET | |
| 48. | 259-0127 J | [1] | BRAKE GP-MECH CALIPER PARKING | |
| 7X-3374 | [1] | NUT-FULL (1/2-20-THD) | ||
| 1B-4430 | [1] | NUT-JAM (1/2-20-THD) | ||
| 49. | 7X-2559 M | [26] | BOLT (M16X2X160-MM) | |
| 50. | 198-7841 B | [8] | SHIM (0.15-MM THK) | |
| 51. | 198-7842 B | [8] | SHIM (0.2-MM THK) | |
| 52. | 198-7843 B | [4] | SHIM (0.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 166-9413 J | [1] | KIT-CAM (COUNTERCLOCKWISE) | ||
| (INCLUDES CAMS, BALL BEARINGS & BALL RETAINER) | ||||
| 259-0128 J | [1] | KIT-BRAKE LINING | ||
| (INCLUDES LINING AS & SPRING) | ||||
| 259-0129 J | [1] | KIT-BRAKE CALIPER | ||
| (INCLUDES SLEEVES, WASHERS, NUTS, BOLT, BOOTS, SPRINGS, LINING AS, SPACERS & O-RINGS) | ||||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50770216
443-3873: CASE & PARTS GP-PLANETARY
443-3873 CASE & PARTS GP-PLANETARY
S/N NBA1-UP
PART OF 294-9818 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
S/N NBA1-UP
PART OF 294-9818 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
For full view, you need register
#SEBP50770217
443-3874: CASE GP-TRANSMISSION
443-3874 CASE GP-TRANSMISSION
S/N NBA1-UP
PART OF 443-3873 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
S/N NBA1-UP
PART OF 443-3873 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
For full view, you need register
Parts for your 444E BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-9202 | [2] | PLUG | |
| 2. | 6Y-1896 | [1] | PLUG AS-DRAIN | |
| 5P-6718 | [1] | SEAL-O-RING | ||
| 3. | 7T-2651 | [1] | STRAINER-SUCTION | |
| 4. | 7T-3253 | [2] | DOWEL | |
| 5. | 9W-5460 | [1] | RING | |
| 6. | 106-9861 | [1] | PLATE AS-COVER | |
| 7. | 120-9762 | [3] | SEAL-O-RING | |
| 8. | 147-0211 | [1] | ELBOW AS | |
| 3G-6927 | [1] | ADAPTER | ||
| 9. | 147-0218 | [1] | TUBE AS | |
| 10. | 147-0234 | [2] | BOLT (9/16-18X0.83-IN) | |
| 11. | 147-0236 | [1] | TUBE AS | |
| 12. | 147-0262 | [4] | WASHER (19.1X24.1X1.5-MM THK) | |
| 13. | 147-0266 | [2] | BOLT (3/4-16X1.417-IN) | |
| 14. | 150-7732 | [2] | SEAL-O-RING | |
| 15. | 205-9244 | [1] | PLUG | |
| 16. | 274-4554 | [1] | CASE AS-FRONT | |
| 334-4963 | [4] | PLUG | ||
| 334-4979 | [4] | PLUG | ||
| 17. | 274-4556 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 8L-2786 | [1] | SEAL-O-RING | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 18. | 466-4938 | [1] | SEAL-LIP TYPE | |
| 19. | 334-5131 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 20. | 105-3478 M | [2] | BOLT-SOCKET HEAD (M10X1.5X35-MM) | |
| 21. | 096-4833 M | [2] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 22. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 23. | 4F-7952 | [1] | SEAL-O-RING | |
| 24. | 7W-3556 | [4] | WASHER (14.27X20.57X1.5-MM THK) | |
| M | METRIC PART | |||
#SEBP50770218
443-3875: CASE GP-TRANSMISSION
443-3875 CASE GP-TRANSMISSION
S/N NBA1-UP
PART OF 443-3873 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
S/N NBA1-UP
PART OF 443-3873 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
For full view, you need register
Parts for your 444E BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-9163 B | [2] | SHIM (0.599-MM THK) | |
| 2. | 6T-9164 B | [2] | SHIM (0.178-MM THK) | |
| 3. | 6T-9165 B | [2] | SHIM (0.076-MM THK) | |
| 4. | 6T-9166 B | [2] | SHIM (0.051-MM THK) | |
| 5. | 6V-0852 | [1] | CAP-DUST | |
| 6. | 7T-2646 | [2] | SPACER (66X79.5X2.02-MM THK) | |
| 7. | 7T-3251 | [1] | BREATHER (TRANSMISSION) | |
| 8. | 104-3288 B | [2] | SHIM (0.05-MM THK) | |
| 9. | 121-2059 B | [2] | SHIM (0.08-MM THK) | |
| 10. | 121-2060 B | [2] | SHIM (0.18-MM THK) | |
| 11. | 121-2061 B | [2] | SHIM (0.6-MM THK) | |
| 12. | 121-7398 | [1] | SPACER (70X79.5X2-MM THK) | |
| 13. | 121-7399 | [1] | SHIM (0.05-MM THK) | |
| 14. | 121-7400 | [1] | SHIM (0.08-MM THK) | |
| 15. | 121-7401 | [1] | SHIM (0.18-MM THK) | |
| 16. | 121-7402 | [1] | SHIM (0.6-MM THK) | |
| 17. | 122-1879 | [2] | SPACER (58X67.5X2-MM THK) | |
| 18. | 147-0201 | [1] | TUBE AS | |
| 19. | 147-0226 | [1] | TUBE AS | |
| 20. | 147-0234 | [4] | BOLT (9/16-18X0.83-IN) | |
| 21. | 237-5186 | [1] | PLATE-IDENTIFICATION (TRANSMISSION) | |
| 22. | 274-4569 | [1] | CASE AS-REAR | |
| 334-4979 | [11] | PLUG | ||
| 23. | 466-4938 | [1] | SEAL-LIP TYPE | |
| 24. | 334-5131 | [11] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 25. | 336-5469 | [4] | RIVET | |
| 26. | 449-8811 M | [1] | BOLT (M10X1.5X80-MM) | |
| 27. | 449-8818 M | [16] | BOLT (M10X1.5X40-MM) | |
| 28. | 3J-1907 | [1] | SEAL-O-RING | |
| 29. | 5P-0995 | [2] | PLUG-SEAL | |
| 30. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 31. | 7W-3556 | [8] | WASHER (14.27X20.57X1.5-MM THK) | |
| 32. | 440-2137 | [1] | SHIM (0.38-MM THK) | |
| 33. | 440-2138 | [1] | SHIM (0.38-MM THK) | |
| 34. | 440-2139 | [1] | SHIM (0.38-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP50770219
445-8910: CLUTCH GP
For full view, you need register
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Caterpillar Parts SIS Catalog 444E :
Truck sale:
$63,731 USD
$57,515 USD
$53,026 USD
$70,144 USD