ELECTRICAL AND STARTING SYSTEM
WIRING GPBRAKING SYSTEM
BRAKE GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP50780210
338-5732: WIRING GP-SENSOR
338-5732 WIRING GP-SENSOR -DELUXE CAB
S/N SJL1-UP
PART OF 335-3055 CAB AR, 335-3054 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N SJL1-UP
PART OF 335-3055 CAB AR, 335-3054 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-0404 | [1] | SWITCH AS-PRESSURE (HYDRAULIC OIL FILTER BYPASS) | |
| 2. | 250-1448 | [1] | CONNECTOR | |
| 3. | 263-9484 | [1] | HARNESS AS-SENSOR | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLDUES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLDUES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 4. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 5. | 3J-1907 | [1] | SEAL-O-RING | |
| 6. | 3K-0360 | [1] | SEAL-O-RING | |
| 7. | 3S-2093 | [4] | STRAP-CABLE | |
| 8. | 4P-7581 | [1] | CLIP (LADDER) | |
#SEBP50780211
349-1101: WIRING GP-SENSOR
349-1101 WIRING GP-SENSOR -OBJECT HANDLING
S/N SJL1-UP
PART OF 350-6944, 350-6945 BACKHOE AR-EXTENDABLE STICK, 354-7005 CONVERSION GP-LOAD CONTROL
AN ATTACHMENT
S/N SJL1-UP
PART OF 350-6944, 350-6945 BACKHOE AR-EXTENDABLE STICK, 354-7005 CONVERSION GP-LOAD CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9362 | [1] | RELAY AS (12-VOLT)(HYDRAULIC FLOW MODE) | |
| 2. | 7K-1181 | [10] | STRAP-CABLE | |
| 3. | 148-8447 | [1] | TEE AS-SWIVEL | |
| 7J-9108 | [1] | SEAL-O-RING | ||
| 7X-0872 | [1] | TEE-SWIVEL | ||
| 4. | 206-2423 | [1] | SADDLE-MOUNTING | |
| 5. | 274-3774 B | [1] | CAP-CONNECTOR | |
| 6. | 349-1098 | [1] | HARNESS AS-SWITCH (CAB) | |
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 349-1099 | [1] | HARNESS AS-SWITCH (REAR) | |
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 188-4651 E | HOSE-HYDRAULIC (131-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5995 D | TUBE (0.2-M) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 8. | 349-1100 | [1] | HARNESS AS-WIRING (WARNING)(HOE) | |
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 188-4651 E | HOSE-HYDRAULIC (298-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 180-9340 | [3] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 5P-5995 D | TUBE (0.3-M) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 9. | 349-2773 | [1] | FILM-WARNING (TIPPING HAZARD, READ OMM) | |
| 10. | 350-1078 | [1] | SWITCH AS-ROCKER (LOAD STABILITY, BUCKET) | |
| 111-7899 | [1] | GASKET | ||
| 11. | 350-1101 | [1] | HARNESS AS-CONSOLE (OBJECT HANDLING) | |
| 228-5856 | [1] | CONNECTOR (10-PIN) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-5009 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 091-2436 | [4] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 12. | 350-9471 | [1] | PLATE AS | |
| 13. | 096-6166 | [1] | WASHER-HARD (4.5X9X1-MM THK) | |
| 14. | 124-0174 | [2] | CLIP (LOOP) | |
| 15. | 164-6874 | [1] | FITTING AS-ELBOW (QUICK DISCONNECT, MALE) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 085-7356 | [1] | FITTING | ||
| 16. | 3S-2093 | [31] | STRAP-CABLE | |
| 17. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 18. | 7X-3165 | [1] | ADAPTER | |
| 19. | 8M-2770 | [1] | CLIP (LOOP) | |
| 20. | 8T-0285 M | [1] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 21. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-6974 M | [1] | BOLT (M6X1X80-MM) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50780212
263-9491: WIRING GP-SIDESHIFT
263-9491 WIRING GP-SIDESHIFT
S/N SJL1-UP
PART OF 352-4623 SIDESHIFT AR
AN ATTACHMENT
S/N SJL1-UP
PART OF 352-4623 SIDESHIFT AR
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8737 B | [2] | PLUG-SEAL | |
| 2. | 106-8704 | [5] | SUPPRESSOR AS-ARC | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECETPACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 206-1346 | [2] | STRAP-CABLE | |
| 4. | 261-5070 | [1] | SWITCH AS-ROCKER (SIDESHIFT) | |
| 111-7899 | [1] | GASKET | ||
| 5. | 263-9493 | [1] | HARNESS AS-PLATFORM (SIDESHIFT) | |
| 180-9339 | [4] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9340 | [18] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECETPACLE AS & WEDGE) | ||||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6. | 102-8802 B | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 3S-2093 | [9] | STRAP-CABLE | |
| 8. | 7I-2673 | [1] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP50780213
340-0150: WIRING GP-STEERING
340-0150 WIRING GP-STEERING -ALL WHEEL STEER
S/N SJL1-UP
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N SJL1-UP
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4971 M | [1] | BOLT (M6X1X30-MM) | |
| 2. | 9R-2807 | [1] | CLIP (RETAINER) | |
| 3. | 7K-1181 | [1] | STRAP-CABLE | |
| 4. | 107-9677 | [1] | SENSOR AS-POSITION (ALL WHEEL STEER) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 205-9920 | [1] | STRAP-CABLE | |
| 6. | 206-1345 | [2] | STRAP-CABLE | |
| 7. | 206-1709 | [1] | HOUSING-GAUGE | |
| 8. | 222-7106 | [1] | COVER | |
| 9. | 223-9079 | [1] | LEVER AS | |
| 10. | 223-9080 | [1] | CLAMP AS | |
| 11. | 311-2701 | [1] | HARNESS AS-DASH (GAUGE) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 7N-7221 | [1] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 12. | 340-0146 | [1] | HARNESS AS-PLATFORM (PILOT) | |
| 228-5856 | [2] | CONNECTOR (10-PIN) | ||
| 9X-3401 | [14] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 091-2436 | [11] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 13. | 340-0147 | [1] | HARNESS AS-STEERING (AXLE) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 180-9340 | [20] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 14. | 343-6503 | [1] | SWITCH AS-ROCKER (ALL WHEEL STEER) | |
| 15. | 343-6504 | [1] | SWITCH AS-ROCKER (STEERING MODE SELECT) | |
| (EACH SWITCH AS-ROCKER INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 17. | 104-2091 | [1] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 18. | 134-2305 | [1] | SEAL | |
| 19. | 170-6307 | [1] | INDICATOR GP-STEERING (REAR) | |
| 4B-2043 | [3] | NUT (8-32-THD) | ||
| 7X-9065 | [1] | LAMP (12-VOLT)(REAR) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 20. | 175-3265 | [2] | SCREW (8-16X0.63-IN) | |
| 22. | 3S-2093 | [19] | STRAP-CABLE | |
| 23. | 4B-4863 | [3] | WASHER (4.7X11X1.2-MM THK) | |
| 24. | 4P-8134 | [1] | CLIP (LADDER) | |
| 25. | 6V-9327 M | [1] | SETSCREW-SOCKET (M6X1-THD) | |
| 27. | 8T-0337 M | [3] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 28. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 30. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 31. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 32. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50780214
310-2352: WIRING GP-TRANSMISSION CONTROL
310-2352 WIRING GP-TRANSMISSION CONTROL -POWERSHIFT
S/N SJL1-UP
PART OF 329-0311 POWER TRAIN AR
AN ATTACHMENT
S/N SJL1-UP
PART OF 329-0311 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [7] | STRAP-CABLE | |
| 2. | 164-1368 | [8] | FASTENER (CLIP) | |
| 3. | 206-2423 | [1] | SADDLE-MOUNTING | |
| 4. | 214-4691 | [1] | SWITCH AS-ROCKER (AUTOSHIFT, STANDARD SHIFT) | |
| 111-7899 | [1] | GASKET | ||
| 5. | 232-1545 | [1] | PLATE AS | |
| 6. | 246-8052 | [1] | HARNESS AS-TRANSMISSION | |
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-3401 | [13] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 180-9340 | [16] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7. | 274-9993 | [1] | PLATE | |
| 8. | 310-9354 | [1] | CONTROL GP-TRANSMISSION (POWER SHIFT)(POWER SHIFT) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 105-3480 M | [2] | BOLT-SOCKET HEAD (M5X0.8X16-MM) | |
| 10. | 3S-2093 | [3] | STRAP-CABLE | |
| 11. | 7X-0620 | [1] | WASHER-HARD (5.5X13X1.6-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50780215
311-3639: WIRING GP-WIPER
311-3639 WIRING GP-WIPER -REAR
S/N SJL1-UP
PART OF 315-1270 WINDOW GP-CAB
AN ATTACHMENT
S/N SJL1-UP
PART OF 315-1270 WINDOW GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 206-1345 | [3] | STRAP-CABLE | |
| 2. | 311-1218 | [1] | HARNESS AS-WINDOW WIPER | |
| 266-4157 | [7] | SLEEVE-BRAIDED | ||
| 266-2814 E | CONDUIT-FLEXIBLE (9.52-MM ID)(141-CM) | |||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [2] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [2] | WIRE AS (14-GA) | ||
| 141-8061 B | TAPE | |||
| 3. | 308-3074 | [4] | CLIP | |
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4171 M | [4] | BOLT (M6X1X12-MM) | |
| 6. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50780216
211-4258: WIRING GP-WORK TOOL
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 159-9495 | [1] | NUT (1-1/2-18-THD) | |
| 2. | 159-9496 | [1] | LOCKWASHER | |
| 3. | 211-9461 | [1] | HARNESS AS-WIRING (ANGLE BROOM) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7781 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-7782 | [1] | HOUSING-PLUG (14-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9G-2265 | [1] | CLIP | ||
| 9G-3695 | [3] | PLUG-SEAL | ||
| 186-3736 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 156-1458 | [1] | COVER | ||
| 156-1460 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 4. | 212-7038 | [1] | BRACKET | |
| 5. | 214-4705 | [1] | SWITCH AS-ROCKER (ANGLE BROOM) | |
| 111-7899 | [1] | GASKET | ||
| 6. | 3S-2093 | [2] | STRAP-CABLE | |
| 7. | 4P-7581 | [1] | CLIP (LADDER) | |
| 8. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50780217
296-0376: WIRING GP-WORK TOOL
296-0376 WIRING GP-WORK TOOL
S/N SJL1-UP
PART OF 332-7952 CONVERSION AR-QUICK COUPLER, 332-7963 VALVE AR-BANK 3
AN ATTACHMENT
S/N SJL1-UP
PART OF 332-7952 CONVERSION AR-QUICK COUPLER, 332-7963 VALVE AR-BANK 3
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-3158 | [5] | SUPPRESSOR-ARC | |
| 2. | 213-6077 | [1] | HARNESS AS-FRONT (LOADER) | |
| 5P-0767 E | HOSE (541-CM) | |||
| 9X-3401 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 3. | 214-4706 | [1] | SWITCH AS-ROCKER (AUXILIARY HYDRAULIC FLOW) | |
| 4. | 214-4707 | [1] | SWITCH AS-ROCKER (ELECTRIC POWER) | |
| 5. | 214-4708 | [1] | SWITCH AS-ROCKER (QUICK COUPLER PIN LOCK) | |
| (EACH SWITCH AS-ROCKER INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 6. | 296-0375 | [1] | HARNESS AS-CAB (PLATFORM) | |
| 228-5856 | [4] | CONNECTOR (10-PIN) | ||
| 9X-3401 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [16] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 141-8061 B | TAPE | |||
| 122-4401 | [3] | TERMINAL | ||
| 091-2436 | [16] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 9X-1055 | [2] | TERMINAL-RECEPTACLE (12-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 7. | 115-1615 | [1] | RELAY AS (12-VOLT)(QUICK COUPLER) | |
| 8. | 3S-2093 | [36] | STRAP-CABLE | |
| 9. | 3S-8665 | [2] | CLIP (LOOP) | |
| 10. | 149-7372 E | SLEEVE-ABRASION (55-CM) | ||
| 11. | 6V-0744 E | GUARD-HOSE (65-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP50780218
216-9083: AXLE GP-DRIVE & STEERING
216-9083 AXLE GP-DRIVE & STEERING -FRONT
S/N SJL1-UP
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N SJL1-UP
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-0639 | [4] | SCREW-FLAT HEAD (M8X1.25X20-MM) | |
| 3. | 219-8798 | [2] | SEAL-LIP TYPE | |
| 4. | 219-8795 | [1] | CAP (PLASTIC) | |
| 5. | 198-7811 | [2] | DOWEL | |
| 6. | 198-7815 | [2] | BUSHING (TRUMPET) | |
| 7. | 152-6144 | [3] | PLUG AS-DRAIN (MAGNETIC)(AXLE, FRONT) | |
| (EACH INCLUDES) | ||||
| 6V-6228 | [1] | SEAL-O-RING | ||
| 8. | 199-0677 | [9] | BOLT (M14X2X40-MM) | |
| 9. | 199-0683 M | [8] | BOLT (M16X2X38-MM) | |
| 10. | 198-7822 | [2] | SEAL | |
| 11. | 199-0783 M | [8] | BOLT (M16X2X38-MM) | |
| 12. | 198-7835 M | [2] | NUT-TIE ROD (M27X1.5-THD) | |
| 13. | 213-4227 | [2] | RETAINER | |
| 14. | 213-4223 | [2] | WASHER (57X66X8.5-MM THK) | |
| 15. | 216-7473 | [2] | PIN AS | |
| (EACH INCLUDES) | ||||
| 198-7823 | [1] | BEARING AS | ||
| 198-7825 | [1] | SEAL | ||
| 198-7838 | [1] | PIN | ||
| 16. | 216-7474 | [2] | PIN AS (LOWER) | |
| (EACH INCLUDES) | ||||
| 198-7826 | [1] | SEAL | ||
| 198-7839 | [1] | PIN | ||
| 217-0049 | [1] | BEARING | ||
| 17. | 213-4225 | [2] | WASHER-THRUST | |
| 18. | 238-5275 | [1] | BEAM | |
| 19. | 238-5286 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | |
| 20. | 238-5296 J | [1] | SHAFT GP-AXLE (LH) | |
| 21. | 238-5297 J | [1] | SHAFT GP-AXLE (RH) | |
| (EACH SHAFT GP INCLUDES) | ||||
| 238-5229 | [1] | YOKE | ||
| 238-5241 | [1] | SHAFT | ||
| 22. | 238-5277 Y | [1] | HOUSING & FLANGE GP-AXLE (LH) | |
| 23. | 238-5278 Y | [1] | HOUSING & FLANGE GP-AXLE (RH) | |
| 24. | 238-5276 Y | [2] | PLANETARY GP-FINAL DRIVE | |
| 25. | 253-5024 | [1] | BREATHER (FRONT AXLE) | |
| 26. | 199-0662 | [2] | SEAL-O-RING | |
| 27. | 154-5404 | [2] | BEARING | |
| 28. | 1U-8846 B | SEALANT-GASKET | ||
| 29. | 238-5285 L | [1] | CYLINDER GP-STEERING | |
| 280-7014 | [2] | CYLINDER HEAD | ||
| 280-7015 | [1] | ROD | ||
| 30. | 238-5236 | [1] | TIE ROD AS | |
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 316-1923 | [1] | TIE ROD | ||
| 316-1924 | [1] | BALL JOINT | ||
| 31. | 238-5237 | [1] | TIE ROD AS | |
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 316-1924 | [1] | BALL JOINT | ||
| 316-1928 | [1] | TIE ROD | ||
| 32. | 198-7841 B | [4] | SHIM (0.15-MM THK) | |
| 33. | 198-7842 B | [4] | SHIM (0.2-MM THK) | |
| 34. | 198-7843 B | [4] | SHIM (0.5-MM THK) | |
| 35. | 212-4678 | [6] | WASHER-HARD (20.5X36.5X5-MM THK) | |
| 36. | 290-4164 M | [6] | BOLT (M20X1.5X80-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 238-5230 J | KIT-SPIDER | |||
| (INCLUDES SPIDER & 4-RETAINING RINGS) | ||||
| 280-7013 L | [1] | KIT-SEAL | ||
| (INCLUDES RINGS, ROD SEALS, WASHER, WIPER ROD & PISTON SEAL) | ||||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50780219
315-2318: AXLE GP-DRIVE & STEERING
315-2318 AXLE GP-DRIVE & STEERING -REAR
S/N SJL1-258
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N SJL1-258
PART OF 329-0320 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 434E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-0652 | [2] | CLIP (PIN) | |
| 2. | 219-8795 | [1] | CAP (PLASTIC) | |
| 3. | 199-0668 | [2] | BUSHING | |
| 4. | 197-9155 | [1] | BREATHER (AXLE, REAR) | |
| 5. | 198-7811 | [2] | DOWEL | |
| 6. | 198-7815 | [2] | BUSHING | |
| 7. | 152-6144 | [4] | PLUG AS-DRAIN (MAGNETIC)(AXLE, REAR) | |
| 8. | 199-0676 | [2] | SPRING | |
| 9. | 199-0679 M | [2] | BOLT (M16X2X95-MM) | |
| 10. | 199-0683 M | [16] | BOLT (M16X2X38-MM) | |
| 11. | 199-0706 | [1] | PISTON | |
| 12. | 198-7822 | [2] | SEAL | |
| 13. | 198-7835 M | [2] | NUT-TIE ROD (M27X1.5-THD) | |
| 14. | 210-3106 | [1] | BRACKET | |
| 15. | 213-4227 | [2] | RETAINER | |
| 16. | 212-5713 | [2] | PLUG AS | |
| 17. | 213-4223 | [2] | WASHER (57X66X8.5-MM THK) | |
| 18. | 216-1610 Y | [2] | PLANETARY GP-FINAL DRIVE (AXLE) | |
| 19. | 216-7473 | [2] | PIN AS | |
| (EACH INCLUDES) | ||||
| 198-7823 | [1] | BEARING AS | ||
| 198-7825 | [1] | SEAL | ||
| 198-7838 | [1] | PIN | ||
| 20. | 216-7474 | [2] | PIN AS (LOWER) | |
| (EACH INCLUDES) | ||||
| 198-7826 | [1] | SEAL | ||
| 198-7839 | [1] | PIN | ||
| 217-0049 | [1] | BEARING | ||
| 21. | 213-4225 | [2] | WASHER-THRUST | |
| 22. | 216-7476 Y | [1] | HOUSING & FLANGE GP-AXLE (RH) | |
| 23. | 216-7477 Y | [1] | HOUSING & FLANGE GP-AXLE (LH) | |
| 24. | 217-2914 | [1] | COVER (DIFFERENTIAL LOCK) | |
| 25. | 231-0699 | [1] | COVER (DIFFERENTIAL LOCK) | |
| 26. | 219-8839 | [1] | ROD | |
| 27. | 174-4647 | [1] | BUSHING | |
| 28. | 174-4650 | [1] | SPACER (20X32X8-MM THK) | |
| 29. | 316-1926 | [2] | DISC AS-BRAKE | |
| (EACH INCLUDES) | ||||
| 199-0786 | [4] | PLATE | ||
| 199-0787 | [3] | PIN | ||
| 238-5291 | [3] | DISC-BRAKE | ||
| 238-5292 | [1] | HUB-BRAKE | ||
| 30. | 312-7617 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 226-4355 | [2] | SPIDER (15-TEETH) | ||
| 226-4356 | [1] | SHAFT | ||
| 226-4357 | [1] | YOKE | ||
| 312-7618 | [1] | SHAFT-AXLE | ||
| 31. | 316-1925 Y | [1] | HOUSING GP-AXLE (REAR) | |
| 32. | 253-4979 | [1] | HOUSING-AXLE (RH) | |
| 33. | 253-4980 | [1] | HOUSING-AXLE (LH) | |
| 34. | 238-5236 | [1] | TIE ROD AS | |
| 35. | 238-5237 | [1] | TIE ROD AS | |
| 36. | 238-5238 Y | [1] | CYLINDER GP-STEERING | |
| 37. | 8T-0292 M | [2] | BOLT (M8X1.25X90-MM) | |
| 38. | 222-7108 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 39. | 8C-7505 M | [4] | SCREW-FLAT HEAD (M8X1.25X20-MM) | |
| 40. | 6V-3940 M | [2] | BOLT (M8X1.25X25-MM) | |
| 41. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 42. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 43. | 095-9805 M | [3] | BOLT-SOCKET HEAD (M14X2X40-MM) | |
| 44. | 4F-9029 | [2] | SEAL | |
| 45. | 9X-7684 | [2] | SEAL-O-RING | |
| 46. | 5H-4909 | [2] | SEAL-O-RING | |
| 47. | 130-7282 | [1] | BRACKET | |
| 48. | 259-0127 | [1] | BRAKE GP-MECH CALIPER PARKING | |
| 166-9413 | [1] | KIT-CAM (COUNTERCLOCKWISE) | ||
| (INCLUDES CAMS, BALL BEARINGS & RETAINER RING) | ||||
| 259-0128 | [1] | KIT-BRAKE LINING | ||
| (INCLUDES LINING AS & SPRING) | ||||
| 259-0129 | [1] | KIT-BRAKE CALIPER | ||
| (INCLUDES SLEEVES, WASHERS, NUT-HEXES, BOOTS, SPRINGS, SPACERS & O-RINGS) | ||||
| 49. | 7X-2559 M | [26] | BOLT (M16X2X160-MM) | |
| 51. | 1U-8846 B | [1] | SEALANT-GASKET | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Caterpillar Parts SIS Catalog 434E :
Truck sale:
On Request