HYDRAULIC SYSTEM
CYLINDER GPDRIVE GP
TANK GP
PUMP GP
HYDRAULIC GP
HYDRAULIC SYSTEM
CYLINDER GP#SEBP50840170
363-8170: CYLINDER GP-BUCKET
363-8170 CYLINDER GP-BUCKET
75-MM (2.95-IN) BORE X 630-MM (24.8-IN) STROKE
PART OF 333-5630 LINKAGE AR-BUCKET
AN ATTACHMENT
75-MM (2.95-IN) BORE X 630-MM (24.8-IN) STROKE
PART OF 333-5630 LINKAGE AR-BUCKET
AN ATTACHMENT
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 375-0744 | [1] | ROD AS | |
2. | 375-0745 | [1] | HEAD | |
3. | 375-0746 | [1] | CYLINDER AS | |
4. | 375-0747 | [1] | PISTON | |
5. | 375-0748 | [1] | KIT-TUBE | |
(INCLUDES TUBE AS & CLIPS) | ||||
6. | 375-0749 | [1] | KIT-SEAL (CYLINDER) | |
(INCLUDES LIP TYPE SEAL, RETAINER RINGS, O-RING SEALS, SEAL AS, BUFFER RING, BEARING & BACKUP RING) | ||||
7. | 375-0750 | [1] | KIT-PISTON SEAL | |
(INCLUDES DUST RING, GUIDE RING, SEAL AS, O-RING SEAL & BACKUP RINGS) | ||||
8. | 375-0751 | [1] | KIT-PISTON | |
(INCLUDES BALL & SCREW) | ||||
9. | 375-0752 | [1] | KIT-BUSHING | |
(INCLUDES BUSHINGS & WIPER SEALS) | ||||
10. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
11. | 6V-6317 M | [2] | BOLT (M10X1.5X20-MM) | |
12. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
M | METRIC PART |
#SEBP50840171
191-1959: CYLINDER GP-STICK
191-1959 CYLINDER GP-STICK
85-MM (3.35-IN) BORE X 750-MM (29.5-IN) STROKE
PART OF 259-7923 STICK AR-HOE
AN ATTACHMENT
85-MM (3.35-IN) BORE X 750-MM (29.5-IN) STROKE
PART OF 259-7923 STICK AR-HOE
AN ATTACHMENT
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 176-8508 | [1] | FITTING-GREASE | |
2. | 170-8837 | [1] | FITTING | |
3. | 199-0595 | [1] | HEAD | |
4. | 198-9417 | [1] | BUSHING | |
5. | 170-8773 H | [1] | RING | |
6. | 170-8774 H | [1] | RING | |
7. | 199-0596 H | [1] | SEAL | |
8. | 199-0597 H | [1] | RING | |
9. | 199-0598 H | [1] | SEAL | |
10. | 199-0599 | [1] | PISTON | |
11. | 217-7970 | [1] | BOLT AS | |
12. | 199-0601 | [2] | RING | |
13. | 171-0666 | [1] | SCREW (M10X1.5-MM) | |
14. | 170-8858 | [1] | BALL | |
15. | 170-8804 | [1] | BEARING | |
16. | 199-0603 | [1] | SEAL | |
17. | 199-0604 | [1] | RING | |
18. | 170-8807 | [2] | STOP | |
19. | 140-5166 JL | [2] | BUSHING | |
20. | 170-8786 | [4] | RING | |
21. | 199-0606 | [1] | PIPE AS | |
22. | 198-9427 | [1] | PLUG | |
23. | 198-9428 H | [2] | SEAL | |
24. | 199-0607 | [1] | FITTING | |
25. | 095-1592 | [1] | SEAL-O-RING | |
26. | 198-9430 | [1] | HOLDER | |
AVAILABLE REPAIR KIT(S): | ||||
199-0609 H | [1] | KIT-SEAL (STICK CYLINDER) | ||
(INCLUDES SEAL AS) | ||||
199-0610 J | [1] | KIT-TUBE (STICK CYLINDER) | ||
(INCLUDES TUBE AS) | ||||
199-0611 L | [1] | KIT-ROD (STICK CYLINDER) | ||
(INCLUDES ROD AS) | ||||
H | KIT MARKED H SERVICES PART(S) MARKED H | |||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
L | KIT MARKED L SERVICES PART(S) MARKED L |
#SEBP50840172
363-8169: CYLINDER GP-STICK
363-8169 CYLINDER GP-STICK
85-MM (3.4-IN) BORE X 750-MM (29.5-IN) STROKE
PART OF 333-5790 STICK AR-HOE
AN ATTACHMENT
85-MM (3.4-IN) BORE X 750-MM (29.5-IN) STROKE
PART OF 333-5790 STICK AR-HOE
AN ATTACHMENT
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 375-0735 | [1] | ROD AS | |
2. | 375-0736 | [1] | HEAD | |
3. | 375-0737 | [1] | CYLINDER AS | |
4. | 375-0738 | [1] | PISTON | |
5. | 375-0739 | [1] | KIT-TUBE | |
(INCLUDES TUBE AS & CLIPS) | ||||
6. | 375-0740 | [1] | KIT-SEAL (STICK CYLINDER) | |
(INCLUDES LIP TYPE-SEAL, RETAINER RINGS, O-RINGS, SEAL AS, BUFFER RING, BEARING & BACKUP RING) | ||||
7. | 375-0741 | [1] | KIT-PISTON SEAL | |
(INCLUDES DUST RING, GUIDE RING, SEAL AS, O-RING & BACKUP RINGS) | ||||
8. | 375-0742 | [1] | KIT-PISTON | |
(INCLUDES STEEL BALL, RETAINING RINGS & BUFFER RING) | ||||
9. | 375-0743 | [1] | KIT-BUSHING | |
(INCLUDES BUSHINGS & WIPER SEALS) | ||||
10. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
11. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
12. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
13. | 095-1267 M | [1] | SETSCREW-SOCKET (M10X1.5-THD) | |
M | METRIC PART |
#SEBP50840173
170-8873: DRIVE GP-SWING
170-8873 DRIVE GP-SWING
S/N MXH1-1089
PART OF 269-4283 MOTOR GP-SWING
ALSO AN ATTACHMENT
S/N MXH1-1089
PART OF 269-4283 MOTOR GP-SWING
ALSO AN ATTACHMENT
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 274-9030 | [1] | GEAR | |
2. | 153-6084 | [1] | COLLAR | |
3. | 6V-5200 | [1] | RING-RETAINING | |
4. | 6V-7644 | [4] | RING-RETAINING | |
5. | 6V-8754 | [3] | RING-RETAINING | |
6. | 8C-3347 | [4] | PIN-ROLL | |
7. | 096-8055 | [3] | PIN-SPRING | |
8. | 169-1144 | [1] | SEAL-O-RING | |
9. | 5A-3604 M | [6] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
10. | 153-6085 | [1] | RING | |
11. | 274-9031 | [1] | KIT-PINION (SWING DRIVE) | |
(INCLUDES PINS, SEAL, BODY, SHAFT, GEAR, RING, COLLARS & BEARINGS) | ||||
12. | 153-6089 | [1] | KIT-CARRIER (SWING DRIVE) | |
(INCLUDES ROLLER PINS, CARRIER, GEARS, PINS, NEEDLES, THRUST WASHERS & RETAINING RINGS) | ||||
13. | 153-6090 | [2] | KIT-CARRIER (SWING DRIVE) | |
(INCLUDES RETAINING RINGS, SPRING PINS, CARRIER, GEARS, PINS, NEEDLES, THRUST WASHERS & RING) | ||||
(PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY) | ||||
M | METRIC PART |
#SEBP50840174
155-6883: FASTENER GP-SWING & FINAL DR
155-6883 FASTENER GP-SWING & FINAL DR
S/N MXH1-1089
PART OF 259-7956 POWER TRAIN AR
ALSO AN ATTACHMENT
S/N MXH1-1089
PART OF 259-7956 POWER TRAIN AR
ALSO AN ATTACHMENT
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP50840175
333-5618: FASTENER GP-SWING & FINAL DR
333-5618 FASTENER GP-SWING & FINAL DR
S/N MXH1150-1169
PART OF 333-5620 POWER TRAIN AR
AN ATTACHMENT
S/N MXH1150-1169
PART OF 333-5620 POWER TRAIN AR
AN ATTACHMENT
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP50840176
347-6081: GAUGE GP-SIGHT
347-6081 GAUGE GP-SIGHT -HYDRAULIC OIL LEVEL
S/N MXH1-1089
PART OF 328-6518, 333-5660 TANK & FILTER GP-HYDRAULIC
ALSO AN ATTACHMENT
S/N MXH1-1089
PART OF 328-6518, 333-5660 TANK & FILTER GP-HYDRAULIC
ALSO AN ATTACHMENT
#SEBP50840177
194-9981: HOUSING GP-PUMP
194-9981 HOUSING GP-PUMP
S/N MXH1-1089
PART OF 349-0500 PUMP GP-PISTON
ALSO AN ATTACHMENT
S/N MXH1-1089
PART OF 349-0500 PUMP GP-PISTON
ALSO AN ATTACHMENT
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 274-5942 Y | [1] | SWASHPLATE GP | |
Y | SEPARATE ILLUSTRATION |
#SEBP50840178
259-7952: HYDRAULIC AR
259-7952 HYDRAULIC AR
S/N MXH1-1089
PART OF 333-5700, 333-6200 COMMON AR
ALSO AN ATTACHMENT
S/N MXH1-1089
PART OF 333-5700, 333-6200 COMMON AR
ALSO AN ATTACHMENT
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
266-2677 Y | [1] | CONTROL GP-PILOT OPERATED HYD (JOYSTICK, PEDALS) | ||
261-0270 Y | [1] | LINES GP-FRONT | ||
266-2678 Y | [1] | LINES GP-PILOT (SWING MOTOR) | ||
260-5273 Y | [1] | LINES GP-PUMP | ||
260-5272 Y | [1] | LINES GP-RETURN | ||
266-2636 Y | [1] | LINES GP-SWING MOTOR | ||
207-8329 Y | [1] | LINES GP-TRAVEL MOTOR | ||
Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
259-7955 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
297-8589 Y | [1] | VALVE & MTG GP-MAIN CONTROL | ||
Y | SEPARATE ILLUSTRATION |
#SEBP50840179
333-5650: HYDRAULIC AR
Parts for your 306 MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
266-2677 Y | [1] | CONTROL GP-PILOT OPERATED HYD (JOYSTICK, PEDALS) | ||
261-0270 Y | [1] | LINES GP-FRONT | ||
333-5646 Y | [1] | LINES GP-PILOT | ||
333-5642 Y | [1] | LINES GP-PUMP | ||
260-5272 Y | [1] | LINES GP-RETURN | ||
333-5645 Y | [1] | LINES GP-SWING MOTOR | ||
333-5641 Y | [1] | LINES GP-TRAVEL MOTOR | ||
333-5627 Y | [1] | COUPLING & MTG GP-PUMP | ||
333-5658 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
297-8589 Y | [1] | VALVE & MTG GP-MAIN CONTROL | ||
Y | SEPARATE ILLUSTRATION |
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
An Improved Blade Cylinder is Now Used on Certain 305.5E, 305.5E2, 306, 306E, and 306E2 Mini Hydraulic Excavators {5102, 7164}
An Improved Blade Cylinder is Now Used on Certain 305.5E, 305.5E2, 306, 306E, and 306E2 Mini Hydraulic Excavators {5102, 7164}
An Improved Blade Cylinder is Now Used on Certain 305.5E, 305.5E2, 306, 306E, and 306E2 Mini Hydraulic Excavators {5102, 7164}