AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

343-6650 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP S/N NJD1-UP PART OF 343-9971 CONFIGURATION AR AN ATTACHMENT 120M


ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
WIRING GP
SENSOR GP
POWER TRAIN
AXLE GP

MOTOR GRADER 120M MOTOR GRADER NJD
 120M AWD Motor Grader (US Marine) NJD00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP5087 120M NJD   (2010)

ELECTRICAL AND STARTING SYSTEM

LIGHTING GP
MOUNTING GP-LIGHTING
343-6615 MOUNTING GP-LIGHTING
MOUNTING GP-LIGHTING
343-6616 MOUNTING GP-LIGHTING
WIRING GP-REAR LIGHTING
343-6650 WIRING GP-REAR LIGHTING
 

#SEBP50870180
 

343-6650: WIRING GP-REAR LIGHTING

343-6650 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N NJD1-UP
PART OF 343-9971 CONFIGURATION AR
AN ATTACHMENT
i03905809 SEBP5087
3436650 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7K-1181 [23] STRAP-CABLE  
3. 031-0249 [12] LOCKNUT (10-24-THD)  
4. 116-0118 [2] CLIP  
5. 261-1502 Y [2] LAMP GP (24-VOLT)  
6. 361-6783 [2] LAMP AS-BLACKOUT  
7. 343-6593 [1] BRACKET AS  
8. 343-6595 [1] BRACKET AS  
9. 334-6115 [1] HARNESS AS-LIGHTING  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  3M-6017 [10] SLEEVE  
  3M-6018 [10] TERMINAL  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [9] PLUG-SEAL  
  9W-0844 [14] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10. 138-3198 [12] SCREW-MACHINE (10-24X1-IN)  
11. 156-6175 [2] CLIP (LADDER)  
12. 1V-6688 [1] GROMMET  
13. 4B-4274 [12] WASHER (5.5X13X1.2-MM THK)  
14. 5C-2890 M [6] NUT (M6X1-THD)  
15. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
16. 5P-6264 [2] GROMMET  
17. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4172 M [6] BOLT (M10X1.5X80-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50870181
 

354-6788: WIRING GP-SECONDARY STEERING

354-6788 WIRING GP-SECONDARY STEERING
S/N NJD1-UP
PART OF 328-8972 COMMON AR
i03817431 SEBP5087
3546788 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 179-0006 Y [1] SWITCH GP-MAGNETIC (24-VOLT TO 32-VOLT)(SECONDARY STEERING RELAY)  
3. 268-6609 [1] CABLE AS  
  1S-7252 [2] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  6V-2722 D [1] TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
  9G-8909 [2] COVER-TERMINAL (BLACK)  
  159-8050 E CABLE (00-GA, BLACK)(28-CM)  
4. 288-2559 [1] CABLE AS  
  159-8049 E CABLE (00-GA, RED)(131-CM)  
  190-3848 [1] TERMINAL-RING (00-GA, 1/2-IN SCREW)  
  190-3849 [1] COVER-TERMINAL (RED)  
  315-0180 [1] TERMINAL-RING (00-GA, 3/8-IN SCREW)  
5. 289-9520 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  289-9519 [1] BRACKET  
6. 300-2599 [1] CABLE AS  
  1S-7252 [2] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(60-CM)  
7. 174-5907 [5] CLIP (LOOP)  
8. 4D-9517 [1] CLIP  
9. 4S-1962 [1] CLIP (LOOP)  
10. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 7V-6571 [1] GROMMET  
12. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
14. 8T-4171 M [4] BOLT (M6X1X12-MM)  
15. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50870182
 

296-5909: WIRING GP-SENSOR

296-5909 WIRING GP-SENSOR -AWD, STEERING CYLINDER POSITION
S/N NJD1-UP
FRONT
PART OF 328-8972 COMMON AR
i02659929 SEBP5087
2965909 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 296-5905 [1] HARNESS AS-SENSOR (STEERING, LH)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
2. 296-5906 [1] HARNESS AS-SENSOR (STEERING, RH)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
3. 297-8049 [2] GROMMET  
4. 7K-1181 [4] STRAP-CABLE  
5. 9M-8406 [2] CLIP (LOOP)  
 

#SEBP50870183
 

343-6638: WIRING GP-SENSOR

343-6638 WIRING GP-SENSOR -ALL WHEEL DRIVE
S/N NJD1-UP
PART OF 343-9972 CONFIGURATION AR
AN ATTACHMENT
i03877926 SEBP5087
3436638 WIRING GP-SENSOR Parts scheme 3436638 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)  
  137-6645 [1] PAD-CONNECTOR  
2. 286-7293 [1] HARNESS AS-CHASSIS (FILTER BYPASS, PUMP DRIVE)  
  8T-8730 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [4] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  7N-9017 [2] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 E TAPE-ELECTRICAL (11-CM)  
  9G-9435 [2] TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW)  
3. 286-7294 [1] HARNESS AS-FRONT CHASSIS  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [25] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [6] PLUG-SEAL  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [13] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-7144 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 E TAPE-ELECTRICAL (10-CM)  
4. 286-7295 [1] HARNESS AS-SOLENOID (PUMP DRIVE)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 286-7296 [1] HARNESS AS-SENSOR (MOTOR SPEED, LH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-0017 G HOSE (83.7-IN)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  210-8958 E TUBE-HEAT SHRINK (24-MM DIA)(14-CM)  
6. 287-3051 [1] HARNESS AS-SENSOR (MOTOR SPEED, RH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-0017 G HOSE (73-IN)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  210-8958 E TUBE-HEAT SHRINK (24-MM DIA)(14-CM)  
7. 288-3901 [1] GUARD AS-SENSOR  
8. 288-3902 [1] GUARD AS  
9. 033-8248 [1] CLIP (LOOP)  
10. 124-1479 [1] CLIP  
11. 130-5300 [3] CLIP  
12. 132-5789 [1] CLIP (LADDER)  
13. 149-7738 [2] CLIP (LOOP)  
14. 3K-0360 [1] SEAL-O-RING  
15. 4D-7794 [1] CLIP  
16. 4K-8864 [1] CLIP (LOOP)  
17. 4P-7581 [1] CLIP (LADDER)  
18. 6V-3265 [2] CLIP  
19. 7K-1181 [30] STRAP-CABLE  
20. 8M-2772 [1] CLIP (LOOP)  
21. 8M-2773 [1] CLIP (LOOP)  
22. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4133 M [3] NUT (M10X1.5-THD)  
24. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
25. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
26. 9M-8406 [1] CLIP (LOOP)  
27. 9X-8250 [4] CLIP  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
 

#SEBP50870184
 

343-6641: WIRING GP-SENSOR

343-6641 WIRING GP-SENSOR -ALL WHEEL DRIVE
S/N NJD1-UP
PART OF 343-9971 CONFIGURATION AR
AN ATTACHMENT
i03878729 SEBP5087
3436641 WIRING GP-SENSOR Parts scheme 3436641 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)  
  137-6645 [1] PAD-CONNECTOR  
2. 286-7293 [1] HARNESS AS-CHASSIS (FILTER BYPASS, PUMP DRIVE)  
  8T-8730 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [4] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  7N-9017 [2] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 E TAPE-ELECTRICAL (11-CM)  
  9G-9435 [2] TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW)  
3. 286-7294 [1] HARNESS AS-FRONT CHASSIS  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [25] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [6] PLUG-SEAL  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [13] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-7144 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 E TAPE-ELECTRICAL (10-CM)  
4. 286-7295 [1] HARNESS AS-SOLENOID (PUMP DRIVE)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 286-7296 [1] HARNESS AS-SENSOR (MOTOR SPEED, LH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-0017 G HOSE (83.7-IN)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  210-8958 E TUBE-HEAT SHRINK (24-MM DIA)(14-CM)  
6. 287-3051 [1] HARNESS AS-SENSOR (MOTOR SPEED, RH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-0017 G HOSE (73-IN)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  210-8958 E TUBE-HEAT SHRINK (24-MM DIA)(14-CM)  
7. 288-3901 [1] GUARD AS-SENSOR  
8. 288-3902 [1] GUARD AS  
9. 033-8248 [1] CLIP (LOOP)  
10. 124-1479 [1] CLIP  
11. 130-5300 [3] CLIP  
12. 132-5789 [1] CLIP (LADDER)  
13. 149-7738 [2] CLIP (LOOP)  
14. 3K-0360 [1] SEAL-O-RING  
15. 4D-7794 [1] CLIP  
16. 4K-8864 [1] CLIP (LOOP)  
17. 4P-7581 [1] CLIP (LADDER)  
18. 6V-3265 [2] CLIP  
19. 7K-1181 [30] STRAP-CABLE  
20. 8M-2772 [1] CLIP (LOOP)  
21. 8M-2773 [1] CLIP (LOOP)  
22. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4133 M [3] NUT (M10X1.5-THD)  
24. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
25. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
26. 9M-8406 [1] CLIP (LOOP)  
27. 9X-8250 [4] CLIP  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
 

#SEBP50870185
 

366-6027: WIRING GP-SENSOR

366-6027 WIRING GP-SENSOR -ALL WHEEL DRIVE
S/N NJD1-UP
PART OF 343-9972 CONFIGURATION AR
AN ATTACHMENT
i04158557 SEBP5087
3666027 WIRING GP-SENSOR Parts scheme 3666027 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [32] STRAP-CABLE  
2. 8T-8737 [6] PLUG-SEAL  
3. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)(ALL WHEEL DRIVE)  
  137-6645 [1] PAD-CONNECTOR  
4. 286-7293 [1] HARNESS AS-CHASSIS (FILTER BYPASS, PUMP DRIVE)  
  8T-8730 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [4] PLUG-SEAL  
  125-7875 [5] TUBE-HEAT SHRINK (7.44-MM DIA)  
  152-5544 [2] TERMINAL AS  
    (EACH INCLUDES)
  7N-9017 [1] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 E TAPE-ELECTRICAL (11-CM)  
  197-7428 [2] TERMINAL AS  
    (EACH INCLUDES)
  9G-9435 [1] TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
5. 286-7294 [1] HARNESS AS-FRONT CHASSIS (CLUTCH, DRIVE SOLENOID)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [25] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [6] PLUG-SEAL  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [13] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-7144 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 E TAPE-ELECTRICAL (2-CM)  
6. 286-7295 [1] HARNESS AS-SOLENOID (PUMP DRIVE)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 351-8442 [1] HARNESS AS-SENSOR (MOTOR SPEED, LH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  165-0017 G HOSE (88-IN)  
  6V-8731 [1] UNION  
  6V-9169 [1] NUT (13/16-16-THD)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  328-9097 [1] COUPLING AS-PERMANENT  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  339-6185 E TAPE (47-CM)  
8. 351-8443 [1] HARNESS AS-SENSOR (MOTOR SPEED, RH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-0017 G [1] HOSE (79-IN)  
  6V-8731 [1] UNION  
  6V-9169 [1] NUT (13/16-16-THD)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  328-9097 [1] COUPLING AS-PERMANENT  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  339-6185 E TAPE (47-CM)  
9. 345-1698 [1] GUARD AS (ALL WHEEL DRIVE, LH)  
10. 345-1697 [1] GUARD AS (ALL WHEEL DRIVE, RH)  
11. 345-1699 [2] PLATE  
12. 033-8248 [1] CLIP (LOOP)  
13. 124-1479 [1] CLIP  
14. 130-5300 [3] CLIP  
15. 132-5789 [1] CLIP (LADDER)  
16. 155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
17. 238-0251 M [4] SCREW-BUTTON HEAD (M10X1.5X25-MM)  
18. 3K-0360 [1] SEAL-O-RING  
19. 4D-7794 [1] CLIP  
20. 4K-8864 [1] CLIP (LOOP)  
21. 4P-7581 [1] CLIP (LADDER)  
22. 6V-1228 [2] CLIP  
23. 6V-3265 [2] CLIP  
24. 8C-8585 M [4] SCREW-BUTTON HEAD (M10X1.5X20-MM)  
25. 8M-2772 [1] CLIP (LOOP)  
26. 8M-2773 [1] CLIP (LOOP)  
27. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [1] NUT (M10X1.5-THD)  
29. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
30. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
31. 9M-8406 [1] CLIP (LOOP)  
32. 9X-8250 [3] CLIP  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
 

#SEBP50870186
 

366-6028: WIRING GP-SENSOR

366-6028 WIRING GP-SENSOR -ALL WHEEL DRIVE
S/N NJD1-UP
PART OF 343-9971 CONFIGURATION AR
AN ATTACHMENT
i04158396 SEBP5087
3666028 WIRING GP-SENSOR Parts scheme 3666028 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [32] STRAP-CABLE  
2. 8T-8737 [6] PLUG-SEAL  
3. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)(ALL WHEEL DRIVE)  
  137-6645 [1] PAD-CONNECTOR  
4. 286-7293 [1] HARNESS AS-CHASSIS (FILTER BYPASS, PUMP DRIVE)  
  8T-8730 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [4] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  152-5544 [2] TERMINAL AS  
    (EACH INCLUDES)
  7N-9017 [1] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 E TAPE-ELECTRICAL (11-CM)  
  197-7428 [2] TERMINAL AS  
    (EACH INCLUDES)
  9G-9435 [1] TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
5. 286-7294 [1] HARNESS AS-FRONT CHASSIS (CLUTCH, DRIVE SOLENOID)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [25] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [6] PLUG-SEAL  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [13] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-7144 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 E TAPE-ELECTRICAL (2-CM)  
6. 286-7295 [1] HARNESS AS-SOLENOID (PUMP DRIVE)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 351-8442 [1] HARNESS AS-SENSOR (MOTOR SPEED, LH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-0017 G HOSE (88-IN)  
  6V-8731 [1] UNION  
  6V-9169 [1] NUT (13/16-16-THD)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  328-9097 [1] COUPLING AS-PERMANENT  
  155-2271 [4] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  339-6185 E TAPE (47-CM)  
8. 351-8443 [1] HARNESS AS-SENSOR (MOTOR SPEED, RH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-0017 G [1] HOSE (79-IN)  
  6V-8731 [1] UNION  
  6V-9169 [1] NUT (13/16-16-THD)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  328-9097 [1] COUPLING AS-PERMANENT  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  339-6185 E TAPE (47-CM)  
9. 345-1698 [1] GUARD AS (ALL WHEEL DRIVE, LH)  
10. 345-1697 [1] GUARD AS (ALL WHEEL DRIVE, RH)  
11. 345-1699 [2] PLATE  
12. 033-8248 [1] CLIP (LOOP)  
13. 124-1479 [1] CLIP  
14. 130-5300 [3] CLIP  
15. 132-5789 [1] CLIP (LADDER)  
16. 155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
17. 238-0251 M [4] SCREW-BUTTON HEAD (M10X1.5X25-MM)  
18. 3K-0360 [1] SEAL-O-RING  
19. 4D-7794 [1] CLIP  
20. 4K-8864 [1] CLIP (LOOP)  
21. 4P-7581 [1] CLIP (LADDER)  
22. 6V-1228 [2] CLIP  
23. 6V-3265 [2] CLIP  
24. 8C-8585 M [4] SCREW-BUTTON HEAD (M10X1.5X20-MM)  
25. 8M-2772 [1] CLIP (LOOP)  
26. 8M-2773 [1] CLIP (LOOP)  
27. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [1] NUT (M10X1.5-THD)  
29. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
30. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
31. 9M-8406 [1] CLIP (LOOP)  
32. 9X-8250 [3] CLIP  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
 

#SEBP50870187
 

344-1894: AXLE AR-FRONT

344-1894 AXLE AR-FRONT -ALL WHEEL DRIVE
S/N NJD1-UP
PART OF 328-8972 COMMON AR
i03878955 SEBP5087
3441894 AXLE AR-FRONT Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 290-3921 Y [1] MOUNTING GP-AXLE (FRONT)  
2. 344-1895 Y [1] AXLE GP-FRONT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50870188
 

260-8699: AXLE GP-FRONT

260-8699 AXLE GP-FRONT -ALL WHEEL DRIVE
S/N NJD1-UP
PART OF 344-1895 AXLE GP-FRONT
i02249853 SEBP5087
2608699 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2D-8652 [2] BEARING  
2. 131-4428 [2] BUSHING  
3. [1] AXLE AS (FRONT)  
  117-8721 [2] LUG (M10X1.5-THD)  
  288-7158 M [2] STUD (M10X1.5X125-MM)  
4. 2G-8793 [4] BUSHING  
5. 5P-8843 [6] SEAL-LIP TYPE  
  M   METRIC PART
 

#SEBP50870189
 

344-1895: AXLE GP-FRONT

344-1895 AXLE GP-FRONT
S/N NJD1-UP
PART OF 344-1894 AXLE AR-FRONT
i03878957 SEBP5087
3441895 AXLE GP-FRONT Parts scheme 3441895 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5667 [4] RETAINER  
2. 2G-8615 [4] WASHER-THRUST (2.015X3.625X0.11-IN THK)  
3. 2G-8626 [2] WASHER-THRUST (2.02X3.63X0.16-IN THK)  
4. 2G-8741 [4] RING-METAL SEAL  
5. 2G-8777 [4] SEAL  
6. 3B-8485 [4] ELBOW  
7. 3B-8686 [1] FITTING-GREASE (1/8-27 PTF)  
8. 257-9799 [4] PIN  
9. 344-1897 Y [2] MOTOR & MTG GP-PISTON (ALL WHEEL DRIVE)  
10. 343-6687 Y [1] GEAR GP-FRONT (ALL WHEEL DRIVE)  
11. 260-8699 Y [1] AXLE GP-FRONT (ALL WHEEL DRIVE)  
12. 260-8703 [2] ARM AS  
    (EACH INCLUDES)
12A. 146-1842 [2] BUSHING  
13. 260-8704 [1] BAR AS  
13A. 2G-8631 [2] BUSHING  
13B. 7K-9202 [4] SEAL-LIP TYPE  
14. 344-1906 Y [1] CYLINDER & MTG GP-STEERING  
15. 344-1905 Y [1] CYLINDER & MTG GP-WHEEL LEAN  
16. 260-8719 [2] PIN  
17. 260-8721 [1] SPACER (47.66X63.5X50-MM THK)  
18. 276-2954 Y [1] LINK GP-STEERING (ALL WHEEL DRIVE)  
19. 295-0775 [2] PIN AS  
20. 295-0782 [2] SPACER (17.46X28.58X14-MM THK)  
21. 198-4768 [4] WASHER-HARD (17.5X32X8-MM THK)  
22. 266-7315 [2] WASHER-HARD (22X65X6-MM THK)  
23. 3B-4629 [2] PIN-COTTER  
24. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
25. 5M-6214 [4] PLUG (1/8-27 PTF)  
26. 5P-7197 [2] WASHER (17X45X6-MM THK)  
27. 5P-8890 [2] SEAL-LIP TYPE  
28. 6V-5844 M [4] BOLT (M16X2X35-MM)  
29. 7X-2561 M [4] BOLT (M20X2.5X35-MM)  
30. 8T-0375 M [2] BOLT (M16X2X45-MM)  
31. 9M-2092 [4] SEAL-O-RING  
32. 3B-8486 [2] FITTING-GREASE (1/8-27 PTF)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120M :

WIRING GP-REAR
327-0179 WIRING GP-REAR
WIRING GP-REAR
324-1818 WIRING GP-REAR
WIRING GP-LIGHTING
343-6667 WIRING GP-LIGHTING
WIRING GP-LIGHTING
343-6666 WIRING GP-LIGHTING
WIRING GP-LIGHTING
343-6648 WIRING GP-LIGHTING
WIRING GP-GRADE CONTROL
364-6458 WIRING GP-GRADE CONTROL
WIRING GP-FRONT
366-3340 WIRING GP-FRONT
WIRING GP-FRONT
364-4190 WIRING GP-FRONT
WIRING GP-SECONDARY STEERING
354-6788 WIRING GP-SECONDARY STEERING
WIRING GP-SENSOR
296-5909 WIRING GP-SENSOR
WIRING GP-SENSOR
343-6638 WIRING GP-SENSOR
WIRING GP-SENSOR
343-6641 WIRING GP-SENSOR
WIRING GP-SENSOR
366-6027 WIRING GP-SENSOR
WIRING GP-SENSOR
366-6028 WIRING GP-SENSOR
AXLE AR-FRONT
344-1894 AXLE AR-FRONT
AXLE GP-FRONT
260-8699 AXLE GP-FRONT

Truck sale:

 
212,000 
Caterpillar 120M2, Construction
- motor graders

Caterpillar 120M2, Construction
317,000 
Caterpillar 120M2, Construction
- motor graders
HOLT CAT
 
On Request 
Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.