395-0357 ENGINE AR-COMPLETE S/N MME11241-UP PART OF 337-4251 MODULE AR-ENGINE & CEM 160M 2 MOTOR GRADER

Part No	Qty	Parts name
329-9996 Y	[1]	ADAPTER GP-EXHAUST DIFFUSER (TURBOCHARGER)
344-4056 Y	[1]	BRACKET GP-MOUNTING
325-3257 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
188-3826 Y	[1]	COOLER GP-ENGINE OIL
350-5472 Y	[1]	COOLER GP-TRANSMISSION OIL
348-9213 Y	[1]	COVER & MTG GP-CYLINDER BLOCK
325-8452 Y	[1]	COVER GP-ENGINE
269-5325 Y	[1]	COVER GP-FRONT HOUSING (OPTIONAL EQUIPMENT)
338-2640 Y	[1]	COVER GP-FRONT HOUSING
370-2283 Y	[1]	COVER GP-VALVE MECHANISM
211-8041 Y	[1]	DAMPER GP
340-7228 Y	[1]	ELBOW GP-AIR INLET
278-0244 Y	[1]	ELBOW GP-WATER
364-0083 Y	[1]	ENGINE AR-CORE
218-0859 Y	[1]	FASTENER GP-DAMPER & PULLEY
346-5148 Y	[1]	FASTENER GP-FUEL INJ PUMP
348-1099 Y	[1]	FASTENER GP-WATER PUMP
349-9430 Y	[1]	FILLER GP-ENGINE OIL
344-5150 Y	[1]	FILTER GP-ENGINE OIL
349-3927 Y	[1]	FILTER GP-FUEL
236-2570 Y	[1]	FLYWHEEL GP
348-7622 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
338-9383 Y	[1]	GEAR GP-REAR
350-3820 Y	[1]	HOUSING GP-FLYWHEEL
299-8022 Y	[1]	HOUSING GP-FRONT
355-7364 Y	[1]	LIFTING GP-ENGINE
343-0620 Y	[1]	LINES GP-AIR
286-9679 Y	[1]	LINES GP-ENGINE OIL (REAR SUMP)
357-6365 Y	[1]	LINES GP-ENGINE OIL (NOX REDUCTION SYSTEM)
331-2758 Y	[1]	LINES GP-FUEL
349-3926 Y	[1]	LINES GP-FUEL FILTER
349-8804 Y	[1]	LINES GP-TURBOCHARGER AIR
344-9399 Y	[1]	LINES GP-TURBOCHARGER OIL
345-7276 Y	[1]	LINES GP-WATER
343-0584 Y	[1]	MANIFOLD GP-EXHAUST
344-8267 Y	[1]	MANIFOLD GP-INLET
342-8963 Y	[1]	MOUNTING GP-ALTERNATOR & COMPR
343-9072 Y	[1]	MOUNTING GP-CONNECTOR
344-3844 Y	[1]	MOUNTING GP-FUEL FILTER (UPPER)
344-3845 Y	[1]	MOUNTING GP-FUEL FILTER (LOWER)
348-8185 Y	[1]	PAN GP-OIL
275-4260 Y	[1]	PLUG GP-CYLINDER BLOCK (JACKET WATER HEATER)
275-8699 Y	[1]	PLUG GP-CYLINDER BLOCK (AUXILIARY COOLER)
346-4997 Y	[1]	PLUG GP-CYLINDER HEAD
292-9786 Y	[1]	PLUG GP-ENGINE (COMPRESSION BRAKE)
347-2324 Y	[1]	PLUG GP-WATER LINES
342-7219 Y	[1]	PULLEY GP-CRANKSHAFT
326-3561 Y	[1]	REGULATOR GP-TEMPERATURE
295-2351 Y	[1]	SEAL GP-CRANKSHAFT
350-8696 Y	[1]	SHIELD GP-HEAT
349-4782 Y	[1]	SPACER GP-AIR INLET
349-1172 Y	[1]	SUPPORT GP-ENGINE
339-5357 Y	[1]	TURBOCHARGER GP
348-7946 Y	[1]	VALVE GP-SOLENOID (AIR INLET)
359-2092 Y	[1]	WIRING GP-ELECTRONIC CONTROL
346-8247 Y	[1]	WIRING GP-SENSOR

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP50940041

347-0103: ENGINE AR-CORE

ENGINE AR-CORE

347-0103 ENGINE AR-CORE
S/N MME1-UP
238 BRAKE KW (319 BHP) AT 1800 RPM
PART OF 364-0083 ENGINE AR-CORE

i04776851 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Part No	Qty	Parts name
294-3593 Y	[1]	CAMSHAFT GP
345-9941 Y	[1]	COOLER GP-EXHAUST (NRS)
294-2987 Y	[1]	CRANKSHAFT GP
277-7261 Y	[1]	CYLINDER BLOCK GP
346-0485 Y	[1]	CYLINDER HEAD GP
294-2931 Y	[1]	GEAR GP-FRONT
342-6646 Y	[6]	PISTON & ROD GP
259-2976 Y	[1]	PUMP GP-ENGINE OIL
344-9101 Y	[1]	PUMP GP-FUEL INJECTION
		-OR-
386-2109 Y	[1]	PUMP GP-FUEL INJECTION
345-1974 Y	[6]	PUMP GP-FUEL INJECTION
346-9561 Y	[1]	PUMP GP-WATER
344-9102 Y	[1]	LINES GP-FUEL INJECTION
342-8959 Y	[1]	SENSOR GP-ENGINE
347-9431 Y	[1]	VALVE & MOUNTING GP (NRS)
348-9896 Y	[1]	VALVE MECHANISM GP
343-9066 Y	[1]	WIRING GP-UNIT INJECTOR
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP50940042

364-0083: ENGINE AR-CORE

ENGINE AR-CORE

364-0083 ENGINE AR-CORE
S/N MME1-UP
PART OF 364-1263, 395-0357 ENGINE AR-COMPLETE
CANNOT BE USED WITH BRAKE

i07162479 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Part No	Qty	Parts name
347-0103 Y	[1]	ENGINE AR-CORE
		-OR-
528-7187 Y	[1]	ENGINE AR-CORE
356-7486 Y	[1]	PLATE & FILM GP
360-7454	[1]	ELECTRONICS GP-ENGINE RATINGS
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP50940043

399-8217: ENGINE AR-CORE

ENGINE AR-CORE

399-8217 ENGINE AR-CORE
S/N TXD1-UP
PART OF 399-8215 ENGINE AR
AN ATTACHMENT

i04895648 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Part No	Qty	Parts name
242-0674 Y	[1]	CAMSHAFT GP
164-6148 Y	[1]	CRANKSHAFT GP
161-3406 Y	[1]	CYLINDER BLOCK GP
384-5590 Y	[1]	CYLINDER HEAD GP
205-1321 Y	[1]	GEAR GP-FRONT
265-1400 Y	[6]	PISTON & ROD GP
389-1184 Y	[1]	PUMP & MTG GP-UNIT INJ HYD
195-8098 Y	[1]	PUMP GP-ENGINE OIL
267-3361 Y	[6]	PUMP GP-FUEL INJECTION
197-9564 Y	[1]	PUMP GP-WATER
330-6034 Y	[1]	SENSOR GP-ENGINE
242-0447 Y	[1]	VALVE MECHANISM GP
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP50940044

528-7187: ENGINE AR-CORE

ENGINE AR-CORE

528-7187 ENGINE AR-CORE
S/N MME1-UP
PART OF 364-0083 ENGINE AR-CORE

i07162482 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Part No	Qty	Parts name
294-3593 Y	[1]	CAMSHAFT GP
449-3099 Y	[1]	COOLER GP-EXHAUST (NRS)
294-2987 Y	[1]	CRANKSHAFT GP
277-7261 Y	[1]	CYLINDER BLOCK GP
502-6504 Y	[1]	CYLINDER HEAD GP
294-2931 Y	[1]	GEAR GP-FRONT
342-6646 Y	[6]	PISTON & ROD GP
259-2976 Y	[1]	PUMP GP-ENGINE OIL
345-1974 Y	[6]	PUMP GP-FUEL INJECTION
386-2109 Y	[1]	PUMP GP-FUEL INJECTION
346-9561 Y	[1]	PUMP GP-WATER
344-9102 Y	[1]	LINES GP-FUEL INJECTION
342-8959 Y	[1]	SENSOR GP-ENGINE
347-9431 Y	[1]	VALVE & MOUNTING GP (NRS)
348-9896 Y	[1]	VALVE MECHANISM GP
343-9066 Y	[1]	WIRING GP-UNIT INJECTOR
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP50940045

337-4251: MODULE AR-ENGINE & CEM

MODULE AR-ENGINE & CEM

337-4251 MODULE AR-ENGINE & CEM
S/N M9E1-UP
EXHAUST
PART OF 353-2925 COMMON AR

i05662582 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Part No	Qty	Parts name
364-1263 Y	[1]	ENGINE AR-COMPLETE
		-OR-
395-0357 Y	[1]	ENGINE AR-COMPLETE
362-8759 Y	[1]	MODULE AR-CLEAN EMISSIONS
343-8991 Y	[1]	PIPE GP-FLEXIBLE EXHAUST (TURBOCHARGER OUTLET)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP50940046

236-3985: BRACKET GP-MOUNTING

BRACKET GP-MOUNTING

236-3985 BRACKET GP-MOUNTING -FUEL FILTER
S/N TXD1-UP
PART OF 387-8570 ENGINE AR-COMPLETE
AN ATTACHMENT

i02809543 SEBP5094

2363985 BRACKET GP-MOUNTING Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	236-3984	[1]	BRACKET AS
2.	3E-4353	[4]	WASHER-HARD (11X25X3-MM THK)
3.	4P-7581	[1]	CLIP (LADDER)
4.	6V-4248 M	[4]	BOLT (M10X1.5X25-MM)
5.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
6.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP50940047

242-0674: CAMSHAFT GP

CAMSHAFT GP

242-0674 CAMSHAFT GP
S/N TXD1-UP
PART OF 399-8217 ENGINE AR-CORE
AN ATTACHMENT

i02433943 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	107-7694	[1]	PLATE-THRUST
2.	242-0673	[1]	CAMSHAFT AS
2A.	1B-8705	[1]	KEY-WOODRUFF
2B.	224-3247	[1]	GEAR (100-TEETH)
3.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP50940048

294-3593: CAMSHAFT GP

CAMSHAFT GP

294-3593 CAMSHAFT GP
S/N MME1-UP
PART OF 347-0103, 528-7187 ENGINE AR-CORE

i03975331 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	107-7694	[1]	PLATE-THRUST
2.	347-7109	[1]	CAMSHAFT AS
	1B-8705	[1]	KEY-WOODRUFF
	347-0425	[1]	GEAR-CAMSHAFT (80-TEETH)
3.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP50940049

348-9213: COVER & MTG GP-CYLINDER BLOCK

COVER & MTG GP-CYLINDER BLOCK

348-9213 COVER & MTG GP-CYLINDER BLOCK
S/N MME1-UP
PROVIDES COVER GP FOR LH SIDE OF CYLINDER BLOCK
PART OF 364-1263, 395-0357 ENGINE AR-COMPLETE
FOR USE WITH ENGINES WITH VALVE COVER MOUNTED BREATHER
CANNOT BE USED WITH ENGINES WITH SIDE MOUNTED BREATHER

i03951892 SEBP5094

3489213 COVER & MTG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	280-4322	[1]	GASKET
2.	348-9214	[1]	COVER-CYLINDER
3.	353-5105	[1]	ADAPTER AS
	030-8194	[1]	CONNECTOR
	238-5081	[1]	SEAL-O-RING
4.	131-0353 M	[1]	STUD (M8X1.25X82.75-MM)
5.	241-0542 M	[2]	STUD (M8X1.25X30-MM)
6.	6V-2317 M	[5]	BOLT (M8X1.25X30-MM)
7.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
8.	9M-1974	[10]	WASHER-HARD (8.8X16X2-MM THK)
9.	398-5597	[2]	PLUG AS
			(EACH INCLUDES)
	360-3692	[1]	PLUG
	214-7568	[1]	SEAL-O-RING
	M		METRIC PART

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Engine Compartment - Clean
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders

Engine Shutdown Switch - Check
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders

Severe Service Application
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Instructions to Obtain and Upload a Warranty Report File for C4.4 through C32 Tier 4 Interim Engines {0336, 7772}
Instructions to Obtain and Upload a Warranty Report File for C4.4 through C32 Tier 4 Interim Engines {0336, 7772}

Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}
Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN MOTORGRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
C9.3 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
C9.3 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

CAT REMAN ANNOUNCES ADDITIONAL SHORT BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)
CAT REMAN ANNOUNCES ADDITIONAL SHORT BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)

Service Letter-APD

Testing and Adjusting

Engine Speed - Check
C9.3 Engines for Caterpillar Built Machines

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}

Troubleshooting

Engine Cranks but Does Not Start
C9.3 Tier 4 Interim Engines

Engine Does Not Crank
C9.3 Tier 4 Interim Engines

Engine Has Mechanical Noise (Knock)
C9.3 Tier 4 Interim Engines

Symptom Troubleshooting
C9.3 Tier 4 Interim Engines

Engine Overspeeds
C9.3 Tier 4 Interim Engines

Engine Stalls at Low RPM
C9.3 Tier 4 Interim Engines

Engine Top Speed Is Not Obtained
C9.3 Tier 4 Interim Engines

Welding Precaution
C9.3 Tier 4 Interim Engines

Service Information Report
C9.3 Tier 4 Interim Engines

Engine Vibration Is Excessive
C9.3 Tier 4 Interim Engines

General Information
C9.3 Tier 4 Interim Engines

System Overview
C9.3 Tier 4 Interim Engines

Component Location
C9.3 Tier 4 Interim Engines

Timing - Calibrate
C9.3 Tier 4 Interim Engines

Acceleration Is Poor or Throttle Response Is Poor
C9.3 Tier 4 Interim Engines

Power Is Intermittently Low or Power Cutout Is Intermittent
C9.3 Tier 4 Interim Engines

Idle Speed Is High
C9.3 Tier 4 Interim Engines

Engine Misfires, Runs Rough or Is Unstable
C9.3 Tier 4 Interim Engines

Symptom Troubleshooting
Cat^® Grade Control Cross Slope System for Motor Graders

Disassembly and Assembly

Steering Frame Lock - Separate and Connect
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems

Engine - Remove and Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement

Service Magazine

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Instructions to Obtain and Upload a Warranty Report File Are Now Available for All Machines Equipped with C4.4 through C32 Tier 4 Interim Engines {0336, 7772}
2011/03/11

Some Condensation May Be Noticed in the Crankcase of Machines Equipped with Tier 4 Engines {1000}
2011/03/11

Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
2011/09/20

Expanding ECM Hotline for Certain Tier 4 Machine Engines {1000, 1901, 1920}
2015/07/15

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

New Maintenance Intervals for Certain Tier 4 Interim Machine Engines Operating in Lesser Regulated Countries {1000}
2014/05/21

Component and System Improvements to Tier 4 Interim C9.3 Machine Engines {1000}
2014/03/27

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

DPF Ash Service History Missing Resolution is Now Available for Certain Tier 4 Interim Engines {1000, 7000}
DPF Ash Service History Missing Resolution is Now Available for Certain Tier 4 Interim Engines {1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 160M 2 :

387-8570 ENGINE AR-COMPLETE

364-1263 ENGINE AR-COMPLETE

399-8215 ENGINE AR

391-8971 SNOW AR-MOTOR GRADER

363-8754 SNOW AR-MOTOR GRADER

354-5260 SNOW AR-MOTOR GRADER

322-3125 SNOW AR-MOTOR GRADER

310-0768 ROADING AR

347-0103 ENGINE AR-CORE

364-0083 ENGINE AR-CORE

399-8217 ENGINE AR-CORE

528-7187 ENGINE AR-CORE

337-4251 MODULE AR-ENGINE & CEM

236-3985 BRACKET GP-MOUNTING

242-0674 CAMSHAFT GP

294-3593 CAMSHAFT GP

Truck sale:

207,000

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

173,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

209,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

204,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

217,000

Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.

395-0357 ENGINE AR-COMPLETE S/N MME11241-UP PART OF 337-4251 MODULE AR-ENGINE & CEM 160M 2 MOTOR GRADER

ENGINE ARRANGEMENT