379-0150 PUMP GP-FUEL INJECTION S/N MME5037-UP PART OF 386-2109 PUMP GP-FUEL INJECTION 160M 2 MOTOR GRADER

FUEL SYSTEM

PUMP GP-FUEL INJECTION

0. 379-0150 PUMP GP-FU
1. 386-2109 PUMP GP-FU
2. 386-2109 PUMP GP-FU
3. 511-7975 PUMP GP-FU

PUMP GP-FUEL PRIMING

4. 361-5084 PUMP GP-FU
5. 361-5084 PUMP GP-FU
6. 434-3167 PUMP GP-FU
7. 360-1693 PUMP GP-FU
8. 434-3158 PUMP GP-FU

PUMP GP-FUEL INJECTION

9. 362-0769 RAIL GP-FU
0. INFORMATION

MOTOR GRADER 160M 2 MOTOR GRADER M9E
160M Series 2 Motor Grader M9E00001-UP (MACHINE) POWERED BY C9 Engine SEBP5094 160M 2 M9E (2010)

FUEL SYSTEM

PUMP GP-FUEL INJECTION

345-1974 PUMP GP-FUEL INJECTION

375-5244 PUMP GP-FUEL INJECTION

379-0150 PUMP GP-FUEL INJECTION

386-2109 PUMP GP-FUEL INJECTION

511-7975 PUMP GP-FUEL INJECTION

#SEBP50940290

379-0150: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

379-0150 PUMP GP-FUEL INJECTION
S/N MME5037-UP
PART OF 386-2109 PUMP GP-FUEL INJECTION

i04787701 SEBP5094

3790150 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-3834	[1]	SEAL-O-RING
2.	104-6385 M	[1]	STUD (M8X1.25-THD)
3.	143-9392 M	[3]	STUD (M8X1.25-THD)
4.	9S-8004	[1]	PLUG (9/16-18-THD)
7.	9S-4180	[1]	PLUG
8.	294-3031	[1]	BOLT-SPECIAL
9.	8T-5439	[1]	WASHER-HARD (21.5X45X6-MM THK)
10.	8C-8545 M	[3]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
13.	6V-5845 M	[1]	BOLT (M20X2.5X70-MM)
14.	364-3761	[1]	TAG-INSTRUCTION (DO NOT START, READ OMM)
15.	371-3586	[1]	PUMP GP-FUEL TRANSFER
16.	373-1570	[1]	CAMSHAFT
17.	378-0746	[1]	SEAL-O-RING
19.	6V-5135	[2]	SETSCREW-SOCKET (7/16-20X0.375-IN)
20.	107-3116	[1]	SEAL-O-RING
21.	145-6115	[2]	DOWEL
22.	214-7568	[1]	SEAL-O-RING
23.	238-5078	[1]	SEAL-O-RING
24.	5P-8347 M	[4]	BOLT (M8X1.25X70-MM)
25.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)

	364-0628 F	[1]	PLUG-SPECIAL (FUEL PUMP TIMING)
	228-7089 F	[1]	SEAL-O-RING
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP50940291

386-2109: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

386-2109 PUMP GP-FUEL INJECTION
S/N MME5037-UP
PART OF 347-0103 ENGINE AR-CORE

i04776973 SEBP5094

3862109 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	293-3579	[1]	PLATE
2.	359-9266	[1]	BRACKET AS
	7E-3443	[2]	BUSHING-TERMINAL
3.	353-5119	[1]	ADAPTER AS
	214-7568	[1]	SEAL-O-RING
	353-5118	[1]	ADAPTER
4.	379-0150 Y	[1]	PUMP GP-FUEL INJECTION
5.	357-4602	[1]	CONNECTOR AS
	5P-2618	[1]	CONNECTOR
	214-7567	[1]	SEAL-O-RING
6.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
7.	392-0820	[1]	ELBOW AS
	214-7568	[1]	SEAL-O-RING
	294-2630	[1]	ELBOW
8.	2P-1279	[2]	LOCKNUT (9/16-18-THD)
9.	3E-9412	[1]	DOWEL
10.	5P-7970 M	[2]	NUT (M8X1.25-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50940292

386-2109: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

386-2109 PUMP GP-FUEL INJECTION
S/N MME1-UP
PART OF 347-0103, 528-7187 ENGINE AR-CORE

i06524144 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	293-3579	[1]	PLATE
2.	359-9266	[1]	BRACKET AS
	7E-3443	[2]	BUSHING-TERMINAL
3.	353-5119	[1]	ADAPTER AS
	214-7568	[1]	SEAL-O-RING
	353-5118	[1]	ADAPTER
4.	511-7975 Y	[1]	PUMP GP-FUEL INJECTION
5.	357-4602	[1]	CONNECTOR AS
	5P-2618	[1]	CONNECTOR
	214-7567	[1]	SEAL-O-RING
6.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
7.	392-0820	[1]	ELBOW AS
	214-7568	[1]	SEAL-O-RING
	294-2630	[1]	ELBOW
8.	2P-1279	[2]	LOCKNUT (9/16-18-THD)
9.	3E-9412	[1]	DOWEL
10.	5P-7970 M	[2]	NUT (M8X1.25-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50940293

511-7975: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

511-7975 PUMP GP-FUEL INJECTION
S/N MME5037-UP
PART OF 386-2109 PUMP GP-FUEL INJECTION

i07295838 SEBP5094

5117975 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-3834	[1]	SEAL-O-RING
2.	143-9392 M	[3]	STUD (M8X1.25-THD)
3.	9S-8004	[1]	PLUG (9/16-18-THD)
4.	265-8093	[4]	PIN-LIFTER GUIDE
5.	273-2663	[1]	DOWEL
6.	9S-4180	[1]	PLUG
7.	294-3031	[1]	BOLT-SPECIAL
8.	8T-5439	[1]	WASHER-HARD (21.5X45X6-MM THK)
9.	6V-5135	[2]	SETSCREW-SOCKET (7/16-20X0.375-IN)
10.	347-0426	[1]	GEAR-FUEL PUMP
11.	349-2645	[2]	RETAINER
12.	8C-8545 M	[3]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
13.	364-3761	[1]	TAG-INSTRUCTION (DO NOT START, READ OMM)
14.	371-3586	[1]	PUMP GP-FUEL TRANSFER
15.	373-1570	[1]	CAMSHAFT
16.	378-0746	[1]	SEAL-O-RING
17.	492-5549	[1]	HEAD AS-PUMP
	9S-8003	[1]	PLUG (1/2-20-THD)
	9S-8005	[1]	PLUG (3/4-16-THD)
	214-7567	[1]	SEAL-O-RING
	238-5080	[1]	SEAL-O-RING
18.	6V-5845 M	[1]	BOLT (M20X2.5X70-MM)
19.	104-6385 M	[1]	STUD (M8X1.25-THD)
20.	107-3116	[1]	SEAL-O-RING
21.	145-6115	[2]	DOWEL
22.	214-7568	[1]	SEAL-O-RING
23.	238-5078	[1]	SEAL-O-RING
24.	5P-8347 M	[4]	BOLT (M8X1.25X70-MM)
25.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP50940294

361-5084: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

361-5084 PUMP GP-FUEL PRIMING
S/N MME1-UP
24-VOLT
PART OF 360-1693 PUMP GP-FUEL PRM & PRIM FILTER
Type 1

i04107213 SEBP5094

3615084 PUMP GP-FUEL PRIMING Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-1016 J	[2]	RING-BACKUP
2.	300-3556 Y	[1]	VALVE GP-SOLENOID (FUEL PRIMING PUMP)
3.	327-8044 Y	[1]	VALVE GP-CHECK
4.	364-8931	[1]	FILTER-ELECTRONIC (FUEL PRIMING PUMP)
5.	033-6033 J	[1]	SEAL-O-RING
6.	143-2545	[1]	RING-RETAINING
7.	188-7536 J	[1]	SEAL
8.	188-7541 J	[1]	SEAL
9.	205-9169 J	[1]	SEAL-O-RING
10.	214-7566	[1]	SEAL-O-RING
11.	236-6717	[2]	SEAL-O-RING
12.	238-5082	[2]	SEAL-O-RING
13.	6D-5801 J	[2]	LOCKNUT (8-32-THD)
14.	6V-6923 J	[1]	RING-BACKUP
15.	6V-8359 M	[3]	BOLT (M6X1X70-MM)
16.	9S-8002	[1]	PLUG (7/16-20-THD)
17.	9X-8267	[3]	WASHER (6.6X12X2-MM THK)
18.	162-2220	[2]	VALVE-CHECK
19.	162-2222	[2]	SPRING

			AVAILABLE REPAIR KIT(S):
	379-1545 J	[1]	KIT-FUEL PUMP
			(INCLUDES CONNECTOR AS & PUMP AS)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50940295

361-5084: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

361-5084 PUMP GP-FUEL PRIMING
S/N MME1-UP
24-VOLT
PART OF 360-1693 PUMP GP-FUEL PRM & PRIM FILTER
Type 2

i05842318 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-1016 J	[2]	RING-BACKUP
2.	300-3556 Y	[1]	VALVE GP-SOLENOID (FUEL PRIMING PUMP)
3.	445-9452 CY	[1]	VALVE GP-CHECK
4.	364-8931	[1]	FILTER-ELECTRONIC (FUEL PRIMING PUMP)
5.	033-6033 J	[1]	SEAL-O-RING
6.	143-2545	[1]	RING-RETAINING
7.	188-7536 J	[1]	SEAL
8.	188-7541 J	[1]	SEAL
9.	205-9169 J	[1]	SEAL-O-RING
10.	214-7566	[1]	SEAL-O-RING
11.	236-6717	[2]	SEAL-O-RING
12.	238-5082	[2]	SEAL-O-RING
13.	6D-5801 J	[2]	LOCKNUT (8-32-THD)
14.	6V-6923 J	[1]	RING-BACKUP
15.	6V-8359 M	[3]	BOLT (M6X1X70-MM)
16.	9S-8002	[1]	PLUG (7/16-20-THD)
17.	9X-8267	[3]	WASHER (6.6X12X2-MM THK)
18.	162-2220	[2]	VALVE-CHECK
19.	162-2222	[2]	SPRING

			AVAILABLE REPAIR KIT(S):
	379-1545 J	[1]	KIT-FUEL PUMP
			(INCLUDES CONNECTOR AS & PUMP AS)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50940296

434-3167: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

434-3167 PUMP GP-FUEL PRIMING
S/N M9E1-UP
PART OF 459-6728 KIT-FUEL SYSTEM PARTS, 434-3158 PUMP GP-FUEL PRM & PRIM FILTER

i05814000 SEBP5094

4343167 PUMP GP-FUEL PRIMING Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	300-3556 Y	[1]	VALVE GP-SOLENOID (FUEL PRIMING PUMP)

			AVAILABLE REPAIR KIT(S):
	379-1545	[1]	KIT-FUEL PUMP
			(INCLUDES RINGS, SEALS, CONNECTOR AS & LOCKNUTS)
	Y		SEPARATE ILLUSTRATION

#SEBP50940297

360-1693: PUMP GP-FUEL PRM & PRIM FILTER

PUMP GP-FUEL PRM & PRIM FILTER

360-1693 PUMP GP-FUEL PRM & PRIM FILTER
S/N MME1-UP
24-VOLT
PART OF 349-3927 FILTER GP-FUEL

i04102749 SEBP5094

3601693 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	212-9580 Y	[1]	FILTER GP-WATER SEP & FUEL
2.	361-5084 Y	[1]	PUMP GP-FUEL PRIMING (24-VOLT)
	Y		SEPARATE ILLUSTRATION

#SEBP50940298

434-3158: PUMP GP-FUEL PRM & PRIM FILTER

PUMP GP-FUEL PRM & PRIM FILTER

434-3158 PUMP GP-FUEL PRM & PRIM FILTER
S/N M9E1-UP
CAT REGENERATION SYSTEM
PART OF 457-3996 KIT-FUEL SYSTEM PARTS

i05813990 SEBP5094

4343158 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	438-5386	[1]	FILTER AS-WATER SEP & FUEL (ULTRA HIGH EFFICIENCY)
2.	434-3167 Y	[1]	PUMP GP-FUEL PRIMING
	Y		SEPARATE ILLUSTRATION

#SEBP50940299

362-0769: RAIL GP-FUEL

RAIL GP-FUEL

362-0769 RAIL GP-FUEL
S/N MME1-UP
PART OF 344-9102 LINES GP-FUEL INJECTION

i04039486 SEBP5094

For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	262-5469	[1]	ADAPTER-SENSOR
2.	293-5340 Y	[1]	SENSOR GP-PRESSURE (FUEL RAIL)
3.	362-0770	[1]	VALVE AS-RELIEF
	Y		SEPARATE ILLUSTRATION

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}

Replacing the Fuel Injection Pump on Certain C9.3 Engines {1251, 1290}
Replacing the Fuel Injection Pump on Certain C9.3 Engines {1251, 1290}

Debris in Oil System Causing Repeat Failures of the (HEUI) Pump for Certain C7 and C9 Engines. {1126, 1251, 1318, 1378}
Debris in Oil System Causing Repeat Failures of the (HEUI) Pump for Certain C7 and C9 Engines. {1126, 1251, 1318, 1378}

Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING NRS COOLERS AND REPLACING THE OUTLET CHECK VALVES OF THE COMMON RAIL FUEL PUMP ON CERTAIN 336E EXCAVATORS, D6T TRACK-TYPE TRACTORS, 140M SERIES 2 AND 160M SERIES 2 MOTOR GRADERS AND 966, 972K MEDIUM WHEEL LOADERS-MULTIPLE REPAIRS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING NRS COOLERS AND REPLACING THE OUTLET CHECK VALVES OF THE COMMON RAIL FUEL PUMP ON CERTAIN 336E EXCAVATORS, D6T TRACK-TYPE TRACTORS, 140M SERIES 2 AND 160M SERIES 2 MOTOR GRADERS AND 966, 972K MEDIUM WHEEL LOADERS-MULTIPLE REPAIRS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH PRESSURE FUEL RELIEF VALVE ON CERTAIN C9.3 ENGINES IN CERTAIN EXCAVATORS, FOREST MACHINES, MOTOR GRADERS, TRACK-TYPE TRACTORS, AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH PRESSURE FUEL RELIEF VALVE ON CERTAIN C9.3 ENGINES IN CERTAIN EXCAVATORS, FOREST MACHINES, MOTOR GRADERS, TRACK-TYPE TRACTORS, AND WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE COMMON RAIL FUEL PUMPS ON CERTAIN C9.3 ENGINES IN CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COMMON RAIL FUEL PUMPS ON CERTAIN C9.3 ENGINES IN CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE COMMON RAIL FUEL PUMP ON CERTAIN C9.3 ENGINES IN CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COMMON RAIL FUEL PUMP ON CERTAIN C9.3 ENGINES IN CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Updated Diagnostic Information Is Available for Certain C7 and C9 ACERT Engines That Are Equipped With Hydraulic Electronic Unit Injectors (HEUI) Fuel Systems{1126, 1250, 1251, 1290, 1714}
Updated Diagnostic Information Is Available for Certain C7 and C9 ACERT Engines That Are Equipped With Hydraulic Electronic Unit Injectors (HEUI) Fuel Systems{1126, 1250, 1251, 1290, 1714}

High-Pressure Fuel Pumps Are Failing on Certain C9 and C9.3 Engines {1714}
High-Pressure Fuel Pumps Are Failing on Certain C9 and C9.3 Engines {1714}

Specifications

Electronic Unit Injector Wiring
C9.3 Engines for Caterpillar Built Machines

Fuel Injector
C9.3 Engines for Caterpillar Built Machines

Fuel Injection Pump
C9.3 Engines for Caterpillar Built Machines

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Information Release Memo

CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS

Service Letter-APD

Testing and Adjusting

Fuel Injector - Test
C9.3 Engines for Caterpillar Built Machines

Fuel Injection Pump - Test
C9.3 Engines for Caterpillar Built Machines

Injector Bypass Fuel Flow - Test
C9.3 Engines for Caterpillar Built Machines

Troubleshooting

Injector Trim File - Install
C9.3 Tier 4 Interim Engines

Injector Solenoid - Test
C9.3 Tier 4 Interim Engines

Fuel Injection Pump - Test
C9.3 Tier 4 Interim Engines

Disassembly and Assembly

Unit Injector - Remove
C9 Engines for Caterpillar Built Machines

Unit Injector - Install
C9 Engines for Caterpillar Built Machines

Injection Actuation Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Fuel Injection Pump - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Unit Injector - Remove
C9.3
Engines for Caterpillar Built Machines

Unit Injector - Install
C9.3
Engines for Caterpillar Built Machines

Service Magazine

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

A New Common Rail Fuel Pump Is Now Used on Certain C9.3 Machine Engines {1251, 1290}
2013/03/20

A New Routing Is Used on Fuel Injector Wiring Harnesses on C9.3 Machine Engines {1290, 1408, 1900}
2011/12/23

A New Unit Injector Wiring Group Is Used on Certain C9.3 Machine Engines {1290, 1408}
2012/09/13

A New Pressure Relief Valve for the Fuel Rail Group Is Used in Certain C9.3 Machine Engines {1288}
2012/10/31

New Fuel Lines Kits Are Used on Certain C9.3 Machine Engines {1288}
2013/05/31

An Improved Fuel Transfer Pump Assembly Is Used in Certain Machines Equipped with C9.3 ACERT Engines {1251, 1256, 1290}
2013/10/11

An Improved Fuel Injection Pump Group Is Used on Certain C9.3 Machine Engines {1251}
2015/02/10

Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04

Cat <SUP>®</SUP> REMAN Brings to the Market Several New Fuel Injector and Pump Solutions {1251, 1254, 1290}
2014/10/03

Updated Procedure for Removing the Fuel Injection Pump on C9.3 Machine Engines {1251}
2015/04/10

A New Fuel Injection Pump Group is Used on Certain C9.3 Machine Engines {1251}
A New Fuel Injection Pump Group is Used on Certain C9.3 Machine Engines {1251}

A New High-Pressure Fuel Pump Is Now Available For Certain C9.3 Machine Engines {1251, 1290}
A New High-Pressure Fuel Pump Is Now Available For Certain C9.3 Machine Engines {1251, 1290}

An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713}
An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713}

Caterpillar Parts SIS Catalog 160M 2 :

375-5244 PUMP GP-FUEL INJECTION

345-1974 PUMP GP-FUEL INJECTION

344-9101 PUMP GP-FUEL INJECTION

267-3361 PUMP GP-FUEL INJECTION

476-8765 PUMP & MTG GP-UNIT INJ HYD

386-2109 PUMP GP-FUEL INJECTION

511-7975 PUMP GP-FUEL INJECTION

361-5084 PUMP GP-FUEL PRIMING

434-3167 PUMP GP-FUEL PRIMING

360-1693 PUMP GP-FUEL PRM & PRIM FILTER

434-3158 PUMP GP-FUEL PRM & PRIM FILTER

Truck sale:

207,000

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

173,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

209,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

204,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

217,000

Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.