AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

253-4677 DRIVE GP-CIRCLE S/N M9E1-UP PART OF 353-2925 COMMON AR 160M 2 MOTOR GRADER


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP
LINES GP-HYDRAULIC

MOTOR GRADER 160M 2 MOTOR GRADER M9E
 160M Series 2 Motor Grader M9E00001-UP (MACHINE) POWERED BY C9 Engine SEBP5094 160M 2 M9E   (2010)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-CIRCLE
253-4677 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
423-9923 DRIVE GP-CIRCLE
 

#SEBP50940840
 

253-4677: DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N M9E1-UP
PART OF 353-2925 COMMON AR
i04035875 SEBP5094
2534677 DRIVE GP-CIRCLE Parts scheme 2534677 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
6. 323-8674 C [1] GEAR-WORM (36-TEETH)  
7. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-6122 [1] SPRING-DISC  
11. 6Y-7953 [6] DISC-FRICTION  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
13. 7D-8984 B [6] SHIM (0.007-IN THK)  
14. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
15. 8D-7424 [1] SPACER (48X81X6-MM THK)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 323-8675 C [1] WORM-CIRCLE DRIVE  
18. 9D-1491 [1] COUPLING  
19. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
20. 253-4678 [1] HOUSING AS-DRIVE  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  8D-7426 [1] BUSHING  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
21. 261-8553 [1] PINION-CIRCLE DRIVE  
22. 307-1958 [1] SHAFT-PINION DRIVE  
23. 307-1959 B [6] SHIM (0.13-MM THK)  
24. 307-1960 B [1] SHIM (0.25-MM THK)  
25. 307-1961 [1] PLATE  
26. 307-1962 B [4] SHIM (0.5-MM THK)  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE (OIL DRAIN)  
33. 2H-9247 [1] SEAL-O-RING  
34. 4F-9653 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP50940841
 

423-9923: DRIVE GP-CIRCLE

423-9923 DRIVE GP-CIRCLE
S/N M9E410-UP
PART OF 353-2925 COMMON AR
i05326455 SEBP5094
4239923 DRIVE GP-CIRCLE Parts scheme 4239923 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
5A. 5K-5129 [2] RING-SEALING  
6. 6G-5534 [1] COVER AS  
6A. 6G-5537 [1] BEARING  
7. 6G-5538 [1] COVER  
8. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
9. 6G-6122 B [1] SPRING-DISC  
10. 6Y-7953 [6] DISC-FRICTION  
11. 7D-8983 B [10] SHIM (0.005-IN THK)  
12. 7D-8984 B [6] SHIM (0.007-IN THK)  
13. 457-0799 [1] LOCKNUT  
14. 8D-7424 [1] SPACER (48X81X6-MM THK)  
15. 8T-0336 [1] FITTING-PRESSURE RELIEF  
16. 9D-1491 [1] COUPLING  
17. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
18. 253-4678 [1] HOUSING AS-DRIVE  
18A. 8D-7426 [1] BUSHING  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
19. 307-1959 B [6] SHIM (0.13-MM THK)  
20. 307-1960 B [1] SHIM (0.25-MM THK)  
21. 307-1961 [1] PLATE  
22. 307-1962 B [4] SHIM (0.5-MM THK)  
23. 323-8674 [1] GEAR-WORM (36-TEETH)  
24. 323-8675 [1] WORM-CIRCLE DRIVE  
25. 458-3867 [1] SHAFT-DRIVE  
26. 458-3868 [1] PINION-CIRCLE DRIVE  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE  
33. 2H-3935 [1] SEAL-O-RING  
34. 2B-8293 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP50940842
 

305-2892: FILTER & MTG GP-HYDRAULIC

305-2892 FILTER & MTG GP-HYDRAULIC
S/N M9E1-UP
PART OF 307-1473 SERVICE CENTER AR
i03942130 SEBP5094
3052892 FILTER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-7577 Y [1] SWITCH GP-BYPASS (HYDRAULIC OIL FILTER)  
2. 242-0407 [1] VALVE AS-DRAIN (HYDRAULIC FILTER)  
3. 245-7603 [1] TUBE AS  
4. 245-8964 [1] BLOCK  
5. 249-2307 Y [1] FILTER GP-OIL (HYDRAULIC TANK RETURN)  
6. 257-8897 [1] HOSE-MOLDED  
7. 329-9510 [1] TUBE AS  
8. 329-9511 [1] TUBE AS  
9. [2] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
10. 156-4283 [1] CONNECTOR AS  
  8T-7926 [1] CONNECTOR  
  6K-6307 [1] SEAL-O-RING  
  8T-0315 [1] SEAL-O-RING  
11. 2S-4078 [1] SEAL-O-RING  
12. 3J-1907 [1] SEAL-O-RING  
13. 3T-9549 [1] ADAPTER  
14. 4J-0524 [2] SEAL-O-RING  
15. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
16. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4133 M [2] NUT (M10X1.5-THD)  
18. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
19. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
20. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-6703 [4] CLAMP-HOSE  
22. 8X-5489 [1] SLEEVE  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 122-6908 G HOSE-HYDRAULIC (8-IN)  
25. 9X-2023 E HOSE (31-CM)  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50940843
 

249-2307: FILTER GP-OIL

249-2307 FILTER GP-OIL
S/N M9E1-UP
INTERNAL BYPASS
PART OF 305-2892 FILTER & MTG GP-HYDRAULIC
i02964428 SEBP5094
2492307 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 338-3540 [1] FILTER ELEMENT-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC TANK)  
2. 321-5967 C [1] HOUSING GP-FILTER (OIL)  
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
3. 249-2308 Y [1] BASE GP-OIL FILTER (HYDRAULIC TANK RETURN)  
4. 214-7568 [1] SEAL-O-RING  
5. 6V-5048 [1] SEAL-O-RING  
6. 9S-4185 [1] PLUG (3/4-16-THD)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 130-0229 [1] SEAL-O-RING  
   
  8L-2786 F [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP50940844
 

327-5548: FILTER GP-OIL

327-5548 FILTER GP-OIL -HYDRAULIC
S/N M9E1-UP
PART OF 305-2919, 359-0812 LINES GP-PUMP
AN ATTACHMENT
i03946058 SEBP5094
3275548 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG (9/16-18-THD)  
2. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)  
3. 253-2673 [1] SWITCH GP-PRESSURE (OIL FILTER BYPASS)  
3A. 3J-1907 [1] SEAL-O-RING  
3B. 5F-9144 [1] SEAL-O-RING  
3C. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3D. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3E. 9X-1813 E SLEEVE (14-CM)  
4. 3J-1907 [1] SEAL-O-RING  
5. 3J-7354 [1] SEAL-O-RING  
6. 9S-4182 [1] PLUG (7/16-20-THD)  
  E   ORDER BY THE CENTIMETER
 

#SEBP50940845
 

416-8304: FILTER GP-OIL

416-8304 FILTER GP-OIL -HYDRAULIC
S/N M9E410-UP
PART OF 359-0812 LINES GP-PUMP
AN ATTACHMENT
i05439696 SEBP5094
4168304 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 346-5577 [1] BASE AS-FILTER (HYDRAULIC OIL)  
  6V-5048 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
  9S-4191 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
2. 349-6097 [1] SWITCH AS-PRESSURE (HYDRAULIC OIL)  
  033-6033 [1] SEAL-O-RING  
  206-9295 [1] SEAL-O-RING  
3. 428-8644 [1] HOUSING AS-FILTER (HYDRAULIC OIL)  
  6V-5048 [1] SEAL-O-RING  
  9S-8002 [1] PLUG (7/16-20-THD)  
  095-1671 [1] SEAL-O-RING  
  095-1671 [1] SEAL-O-RING  
4. 389-1076 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
4A. 095-1671 [1] SEAL-O-RING  
 

#SEBP50940846
 

279-8137: LINES GP-HYDRAULIC

279-8137 LINES GP-HYDRAULIC -FRONT BLADE
S/N M9E1-UP
PART OF 351-5178 OPTION AR-WORK TOOL
FOR USE WITH @@@@@309-6809@@@@@
AN ATTACHMENT
i03754799 SEBP5094
2798137 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-0999 I [2] HOSE AS  
2. 148-8366 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8987 [1] ELBOW  
  6V-8397 [2] SEAL-O-RING  
3. 150-3028 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-9343 [1] ELBOW  
  3D-2824 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
4. 3E-7403 [2] ADAPTER  
5. 6V-8398 [2] SEAL-O-RING  
6. 6V-9168 [2] NUT (11/16-16-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP50940847
 

305-2887: LINES GP-HYDRAULIC

305-2887 LINES GP-HYDRAULIC -CENTERSHIFT LOCK
S/N M9E1-UP
PART OF 358-9336 OPTION AR-MACHINE
AN ATTACHMENT
i03950089 SEBP5094
3052887 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-0327 I [1] HOSE AS  
2. 150-3074 [1] ORIFICE AS  
  110-5266 [1] ORIFICE (1.6-MM)  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
3. 205-5596 [2] SPACER (11X15X35-MM THK)  
4. 259-7140 M [2] STUD-TAPERLOCK (M10X1.5X80-MM)  
5. 266-9737 I [1] HOSE AS  
6. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
7. 148-7027 I [1] HOSE AS  
8. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
9. 148-8367 [1] ELBOW AS (45-DEG)  
  6V-9850 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
10. 148-8378 [1] ELBOW AS (90-DEG)  
  6V-8724 [1] ELBOW (90-DEG)  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
11. 1S-0994 [1] CLIP (LOOP)  
12. 067-2551 [2] CLIP  
13. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
15. 132-2453 [1] UNION  
16. 6E-4701 Y [1] VALVE GP-CHECK  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50940848
 

305-2926: LINES GP-HYDRAULIC

305-2926 LINES GP-HYDRAULIC -CIRCLE, DRAWBAR, MOLDBOARD
S/N M9E1-UP
PART OF 353-2925 COMMON AR
Type 1
i03935857 SEBP5094
3052926 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 5P-0599 [2] CLAMP-BAND  
3. 8W-3991 [2] JUNCTION BLOCK  
4. 9M-4594 [4] SPACER (0.406X0.875X0.75-IN THK)  
5. 9R-8870 [2] BLOCK  
6. 164-5605 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-0076 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
7. 245-1375 [1] GUIDE AS-HOSE  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
8. 246-6341 [2] CLAMP  
9. 246-6342 [8] CLAMP  
10. 281-0627 [2] CLAMP  
11. 286-8181 I [1] HOSE AS  
12. 286-8184 I [1] HOSE AS  
13. 296-4308 [1] TUBE AS  
14. 296-4309 [1] TUBE AS  
15. 297-2813 [4] TUBE AS  
16. 297-2814 [4] TUBE AS  
17. 312-8373 I [1] HOSE AS  
18. 312-8381 I [1] HOSE AS  
19. 312-8382 I [1] HOSE AS  
20. 312-8383 I [2] HOSE AS  
21. 312-8384 I [1] HOSE AS  
22. 323-3756 I [2] HOSE AS  
23. 323-3757 I [1] HOSE AS  
24. 323-5746 I [1] HOSE AS  
25. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
26. 148-8340 [12] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
27. 148-8354 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-9002 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
28. 148-8358 [1] ELBOW AS  
  6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
29. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
30. 148-8372 [1] ELBOW AS  
  6V-8721 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 148-8374 [4] ELBOW AS  
    (EACH INCLUDES)
  6V-8723 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
32. 153-6241 [1] ELBOW AS  
  8C-8989 [1] ELBOW  
  6V-8398 [1] SEAL-O-RING  
35. 4D-7735 [2] CLIP  
36. 5G-3676 [2] GROMMET  
37. 6D-4246 [13] CLIP (LOOP)  
38. 6D-4247 [2] CLIP  
39. 6V-8398 [8] SEAL-O-RING  
41. 8T-1895 [2] CLIP (SLOT)  
42. 8T-1896 [2] CLIP (TAB)  
43. 8T-4121 [26] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4133 M [7] NUT (M10X1.5-THD)  
45. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
46. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
47. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
48. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
51. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
54. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50940849
 

305-2926: LINES GP-HYDRAULIC

305-2926 LINES GP-HYDRAULIC -CIRCLE, DRAWBAR, MOLDBOARD
S/N M9E1-UP
PART OF 353-2925 COMMON AR
Type 2
i05399523 SEBP5094
3052926 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 5P-0599 [2] CLAMP-BAND  
3. 8W-3991 [2] JUNCTION BLOCK  
4. 9M-4594 [4] SPACER (0.406X0.875X0.75-IN THK)  
5. 9R-8870 [2] BLOCK  
6. 164-5605 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-0076 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
7. 245-1375 [1] GUIDE AS-HOSE  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
8. 246-6341 [2] CLAMP  
9. 246-6342 [8] CLAMP  
10. 447-4049 [2] CLAMP  
11. 286-8181 I [1] HOSE AS  
12. 442-6229 I [1] HOSE AS  
13. 296-4308 [1] TUBE AS  
14. 296-4309 [1] TUBE AS  
15. 297-2813 [3] TUBE AS  
16. 297-2814 [3] TUBE AS  
17. 312-8373 I [1] HOSE AS  
18. 312-8381 I [1] HOSE AS  
19. 442-6228 I [1] HOSE AS  
20. 312-8383 I [2] HOSE AS  
21. 312-8384 I [1] HOSE AS  
22. 450-5267 I [2] HOSE AS  
23. 323-3757 I [1] HOSE AS  
24. 323-5746 I [1] HOSE AS  
26. 148-8340 [12] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
27. 148-8354 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-9002 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
28. 148-8358 [1] ELBOW AS  
  6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
29. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
30. 148-8372 [1] ELBOW AS  
  6V-8721 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 148-8374 [6] ELBOW AS  
    (EACH INCLUDES)
  6V-8723 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
32. 153-6241 [1] ELBOW AS  
  8C-8989 [1] ELBOW  
  6V-8398 [1] SEAL-O-RING  
36. 5G-3676 [4] GROMMET  
37. 6D-4246 [11] CLIP (LOOP)  
38. 6D-4247 [2] CLIP  
39. 6V-8398 [6] SEAL-O-RING  
41. 8T-1895 [2] CLIP (SLOT)  
42. 8T-1896 [2] CLIP (TAB)  
43. 8T-4121 [31] WASHER-HARD (11X21X2.5-MM THK)  
44. 344-5675 M [9] NUT (M10X1.5-THD)  
45. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
46. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
47. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
48. 8T-4186 M [5] BOLT (M10X1.5X40-MM)  
49. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
54. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
55. 447-4050 [2] CLAMP  
56. 8T-1890 [2] CLIP (TAB)  
57. 8T-1889 [2] CLIP (SLOT)  
58. 8T-1888 [2] CLIP (TAB)  
59. 8T-1887 [2] CLIP (SLOT)  
60. 7X-7729 [2] WASHER (11X25X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Circle Drive Oil - Change
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Circle Drive Pinion Teeth - Lubricate
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Circle Clearances - Check/Adjust
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Specifications
Circle Drive
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Motor Grader Circle Pinion Reuse {5207}
Motor Grader Circle Pinion Reuse {5207}
Reusability of Worm Gear Sets {5207, 7552}
Reusability of Worm Gear Sets {5207, 7552}
Testing and Adjusting
Disc Pack Preload for Circle Drive - Adjust
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Circle Drive - Remove
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Circle Drive - Disassemble
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Circle Drive - Assemble
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Circle Drive - Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Service Magazine
A New Lubrication Group for the Circle Drive Pinion Is Available {5207, 7510, 7540}
2013/05/22
Maintaining the Proper Circle Drive Pinion Adjustment and Proper Lubrication Maximizes the Pinion Service Life on Motor Graders {0645, 5207, 6152, 6154, 6155}
Maintaining the Proper Circle Drive Pinion Adjustment and Proper Lubrication Maximizes the Pinion Service Life on Motor Graders {0645, 5207, 6152, 6154, 6155}
A New Torque Procedure is Used on the Bolts in the Circle Drive Group on Certain Motor Graders {5207}
2011/08/05
A New Shaft with New Pinion in the Circle Drive Group Is Now Used on Certain Motor Graders {5207}
2014/01/07
The Disassembly and Assembly Manual for Worm Gear Bearing Preload Setting has been Updated on Certain Motor Graders {5207}
2015/01/16
A New Shaft With New Pinion In The Circle Drive Group Is Now Used On Certain Motor Graders {5207}
A New Shaft With New Pinion In The Circle Drive Group Is Now Used On Certain Motor Graders {5207}
Proper Maintenance Improves the Performance of the Circle Drive for Certain Motor Graders {5207}
Proper Maintenance Improves the Performance of the Circle Drive for Certain Motor Graders {5207}

Caterpillar Parts SIS Catalog 160M 2 :

CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
CYLINDER GP-STEERING
255-8715 CYLINDER GP-STEERING
CYLINDER GP-SIDESHIFT
249-4116 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-RIPPER
326-2227 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
335-1974 CYLINDER GP-LIFT
DRIVE GP-CIRCLE
423-9923 DRIVE GP-CIRCLE
FILTER & MTG GP-HYDRAULIC
305-2892 FILTER & MTG GP-HYDRAULIC
FILTER GP-OIL
249-2307 FILTER GP-OIL
FILTER GP-OIL
327-5548 FILTER GP-OIL
FILTER GP-OIL
416-8304 FILTER GP-OIL
LINES GP-HYDRAULIC
279-8137 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
305-2887 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
305-2926 LINES GP-HYDRAULIC

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.