AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

360-2987 CONTROL GP-JOYSTICK -LH S/N M9E1-UP PART OF 357-9151 CONTROL & MTG GP-JOYSTICK ALSO AN ATTACHMENT 160M 2


OPERATOR STATION
CONTROL GP
CAB GP
SEAT GP
MONITOR GP
DOOR GP

MOTOR GRADER 160M 2 MOTOR GRADER M9E
 160M Series 2 Motor Grader M9E00001-UP (MACHINE) POWERED BY C9 Engine SEBP5094 160M 2 M9E   (2010)

OPERATOR STATION

CONTROL GP
CONTROL GP-JOYSTICK
348-6994 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
348-6995 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
360-2987 CONTROL GP-JOYSTICK
MOUNTING GP-CONTROL
330-3866 MOUNTING GP-CONTROL
 

#SEBP50941010
 

360-2987: CONTROL GP-JOYSTICK

360-2987 CONTROL GP-JOYSTICK -LH
S/N M9E1-UP
PART OF 357-9151 CONTROL & MTG GP-JOYSTICK
ALSO AN ATTACHMENT
i04247850 SEBP5094
3602987 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0705 [5] SEAL  
2. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 247-0733 [1] BOOT  
4. 9X-3401 [23] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 8T-8737 [5] PLUG-SEAL  
6. 271-2811 [1] KIT-RECEPTACLE (12-PIN)  
7. 151-9274 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8. 342-9971 [1] SWITCH AS (FORWARD, NEUTRAL, REVERSE)  
9. 442-0052 J [1] KIT-JOYSTICK  
    (INCLUDES TAPE, TAPE REMOVAL TOOL, SCREWS, BOLT, NUTS, BIT & WASHERS)
  J   KIT USED ONLY WHEN ADVANCED CONTROL JOYSTICK IS MOUNTED TO JOYSTICK HANDLE)
 

#SEBP50941011
 

263-2590: COVER GP-CAB

263-2590 COVER GP-CAB -REAR BULKHEAD
S/N M9E1-UP
PART OF 310-2030 CAB AR
ALSO AN ATTACHMENT
i02779046 SEBP5094
2632590 COVER GP-CAB Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-2589 [1] COVER  
2. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
4. 6V-5746 D TRIM (0.7-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP50941012
 

363-4962: COVER GP-CAB

363-4962 COVER GP-CAB
S/N M9E1-UP
PART OF 379-3676, 381-3760, 381-3761 CAB AR
AN ATTACHMENT
i04864455 SEBP5094
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4189 M [3] BOLT (M8X1.25X20-MM)  
  363-4961 [1] COVER  
  356-5177 [1] COVER-VENT  
  6V-5746 D TRIM (0.8-M)  
  5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP50941013
 

252-1805: CUSHION GP-ARM

252-1805 CUSHION GP-ARM
S/N M9E1-UP
PART OF 345-1271, 345-1272 SUPPORT GP-CONTROL
ALSO AN ATTACHMENT
i02775610 SEBP5094
2521805 CUSHION GP-ARM Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. 233-3272 [1] CUSHION AS  
3. 5C-9553 M [2] BOLT (M6X1X16-MM)  
4. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP50941014
 

278-0668: DISPLAY GP-CAMERA

278-0668 DISPLAY GP-CAMERA -WORK AREA VISUAL SYSTEM
S/N M9E1-UP
PART OF 309-9843 CAMERA AR
AN ATTACHMENT
i02787748 SEBP5094
2780668 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 251-8248 [1] CABLE AS-COMMUNICATION  
3. 333-8153 [1] CONNECTION AS  
4. 344-2733 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  344-3847 [1] CABLE AS (DISPLAY)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS, & WEDGE)
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 372-7500 [1] PLATE  
6. 3E-8020 M [1] SCREW-TRUSS HEAD (M6X1X25-MM)  
7. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
8. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP50941015
 

361-3145: DISPLAY GP-CAMERA

361-3145 DISPLAY GP-CAMERA -WORK AREA VISUAL SYSTEM
S/N M9E1-UP
PART OF 391-2914 CAMERA AR
AN ATTACHMENT
i04869011 SEBP5094
3613145 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 251-8248 [1] CABLE AS-COMMUNICATION  
3. 333-8153 [1] CONNECTION AS  
4. 464-6047 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  344-3847 [1] CABLE AS (DISPLAY)  
5. 361-3146 [1] PLATE  
6. 3E-6924 M [1] SCREW-TRUSS HEAD (M6X1X50-MM)  
7. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
8. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP50941016
 

439-7515: DISPLAY GP-CAMERA

439-7515 DISPLAY GP-CAMERA
S/N M9E1-UP
PART OF 435-6258 CAMERA AR
AN ATTACHMENT
i05391208 SEBP5094
4397515 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(CAMERA)  
2. 251-8248 [1] CABLE AS-COMMUNICATION  
3. 333-8153 [2] CONNECTION AS  
4. 361-3146 [1] PLATE  
5. 438-3109 [1] HARNESS AS-PANEL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [9] PLUG-SEAL  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  100-5041 [4] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [14] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [14] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [13] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  329-3734 B TAPE-ELECTRICAL  
6. 464-6049 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 441-8382 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
8. 3E-6924 M [1] SCREW-TRUSS HEAD (M6X1X50-MM)  
9. 3S-2093 [10] STRAP-CABLE  
10. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
11. 9X-2043 M [1] SCREW-TRUSS HEAD (M6X1X14-MM)  
12. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
13. 261-3223 [1] CABLE AS-COMMUNICATION  
14. 8K-6211 [3] CLIP  
15. 2V-8260 [1] GROMMET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP50941017
 

447-2229: DISPLAY GP-CAMERA

447-2229 DISPLAY GP-CAMERA
S/N M9E1-UP
PART OF 391-2914 CAMERA AR
AN ATTACHMENT
i05498690 SEBP5094
4472229 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-8248 [1] CABLE AS-COMMUNICATION  
2. 333-8153 [1] CONNECTION AS  
3. 464-6047 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  344-3847 [1] CABLE AS (DISPLAY)  
4. 3S-2093 [11] STRAP-CABLE  
5. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
6. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP50941018
 

451-6020: DISPLAY GP-CAMERA

451-6020 DISPLAY GP-CAMERA
S/N M9E1-UP
PART OF 435-6258 CAMERA AR
AN ATTACHMENT
i05731267 SEBP5094
4516020 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(CAMERA)  
2. 3S-2093 [10] STRAP-CABLE  
3. 251-8248 [1] CABLE AS-COMMUNICATION  
4. 268-8643 [1] CABLE AS (6-M)  
5. 333-8153 [2] CONNECTION AS  
6. 438-3109 [1] HARNESS AS-PANEL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [9] PLUG-SEAL  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  100-5041 [4] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [14] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [14] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [13] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  329-3734 B TAPE-ELECTRICAL  
7. 440-4779 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  440-4780 [1] CABLE AS  
8. 441-8382 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
9. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
10. 9X-2043 M [1] SCREW-TRUSS HEAD (M6X1X14-MM)  
11. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP50941019
 

294-1033: DOOR GP-CAB

294-1033 DOOR GP-CAB -LH
S/N M9E1-UP
PART OF 310-2030 CAB AR
FIELD REPLACEMENT ORDER @@@@@357-9200@@@@@
ALSO AN ATTACHMENT
i02779648 SEBP5094
2941033 DOOR GP-CAB Parts scheme 2941033 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7636 [2] PIN AS-SPRING  
2. 4E-8722 [5] NUT (RETAINER)  
3. 184-0983 M [1] NUT-HEX FLANGE (M12X1.75-THD)  
4. 252-1862 J [1] HANDLE AS-PULL  
5. 252-1863 [1] GASKET  
6. 261-1731 [1] BOOT  
7. 361-0421 [1] COVER  
8. 269-2890 [1] CLEVIS  
9. 269-2892 [1] PIN  
10. 269-2893 [1] CLIP  
11. 272-1623 [1] BELLCRANK AS  
12. 285-3692 [1] SPACER-SPECIAL  
13. 352-1643 [1] DOOR AS-CAB (LH)  
14. 295-1114 Y [1] WIPER GP-WINDOW (DOOR, LH)  
15. 295-1200 [2] HINGE (LH)  
16. 295-5648 [1] PLATE  
17. 295-5665 [1] BRACKET AS  
18. 295-6393 [1] COVER (LH)  
19. 328-4984 [1] LATCH AS-DOOR (LH)  
20. 295-6400 [1] LINKAGE AS (LH)  
21. 295-6406 [1] LATCH AS (LH)  
22. 295-6652 [1] GLASS (DOOR, LH)  
23. 296-2991 [1] BRACKET  
24. 296-4040 [1] STRIKER AS  
25. 296-4109 [1] COVER  
26. 296-4924 [1] HARNESS AS-WINDOW WIPER  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  144-0195 E HOSE (95-CM)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  297-4169 [2] GROMMET  
27. 297-4169 [1] GROMMET  
28. 299-1021 [1] LEVER GP-CAB DOOR  
  8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  115-9345 [1] KNOB-CONTROL (DOOR RELEASE)  
29. 299-1660 [1] CABLE AS  
  7S-9930 [2] RING-RETAINING  
  159-0052 [2] PIN-CLEVIS  
30. 114-6658 [4] WASHER (6.5X17X1-MM THK)  
31. 109-5008 [1] BUMPER-CONICAL  
32. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 5C-7261 M [1] NUT (M8X1.25-THD)  
34. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
37. 9X-2043 M [11] SCREW-TRUSS HEAD (M6X1X14-MM)  
38. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 328-5492 L SEAL (50-DM)  
40. 331-9731 E SEAL (4-CM)  
41. 110-7524 [8] BUTTON  
42. 3S-2093 [3] STRAP-CABLE  
43. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
44. 214-9186 [6] BUTTON  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  L   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation and Removal of the Detent in the Joystick Control for the Steering in M-Series Motor Graders {3168, 4343, 5063, 5705}
Installation and Removal of the Detent in the Joystick Control for the Steering in M-Series Motor Graders {3168, 4343, 5063, 5705}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Joystick Control - Remove and Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Service Magazine
An Improved Plate As for the Auxiliary Hydraulic Switches are Now Used On M-Series and M-Series 2 Motor Graders {5702, 5705}
2011/12/23
Proportional Switch Assemblies With Improved Design are Now Used On Certain Motor Graders {1435, 5702}
2014/11/17

Caterpillar Parts SIS Catalog 160M 2 :

CONTROL GP-JOYSTICK
348-6995 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
348-6994 CONTROL GP-JOYSTICK
360-7616 CONTROL GP-ELECTROHYDRAULIC
360-7615 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
344-2766 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
344-2766 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
344-2765 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
344-2764 CONTROL GP-ELECTROHYDRAULIC
COVER GP-CAB
263-2590 COVER GP-CAB
363-4962 COVER GP-CAB
CUSHION GP-ARM
252-1805 CUSHION GP-ARM
DISPLAY GP-CAMERA
278-0668 DISPLAY GP-CAMERA
DISPLAY GP-CAMERA
361-3145 DISPLAY GP-CAMERA
DISPLAY GP-CAMERA
439-7515 DISPLAY GP-CAMERA
DISPLAY GP-CAMERA
447-2229 DISPLAY GP-CAMERA
DISPLAY GP-CAMERA
451-6020 DISPLAY GP-CAMERA

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.