AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

159-7967 BLADE AS-ANGLING S/N JLB1-UP; SBF1-UP PART OF 159-7966 BLADE GP-ANGLING AN ATTACHMENT 527 TRACK SKIDDER


WORK TOOLS
BLADE GP
IMPLEMENTS
BOOM GP
WORK TOOLS
GRAPPLE GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK SKIDDER 527 TRACK SKIDDER JSR
 527 Track Skidder JSR00001-UP (MACHINE) POWERED BY 3304 Engine SEBP5101 527 JSR   (2010)

WORK TOOLS

BLADE GP
BLADE & EDGE GP-ANGLING
293-8981 BLADE & EDGE GP-ANGLING
BLADE AS-ANGLING
159-7967 BLADE AS-ANGLING
BLADE AS-ANGLING
8E-9495 BLADE AS-ANGLING
BLADE GP-ANGLING
159-7966 BLADE GP-ANGLING
BLADE GP-ANGLING
293-8980 BLADE GP-ANGLING
BLADE GP-ANGLING
8E-9494 BLADE GP-ANGLING
 

#SEBP51010370
 

159-7967: BLADE AS-ANGLING

159-7967 BLADE AS-ANGLING
S/N JLB1-UP; SBF1-UP
PART OF 159-7966 BLADE GP-ANGLING
AN ATTACHMENT
i03919670 SEBP5101
1597967 BLADE AS-ANGLING Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-6594 [2] STRIP-TAPPING  
2. 8E-9162 [1] BRACKET AS  
3. 4T-0172 [1] TRUNNION  
4. 6Y-4385 [1] SLEEVE  
5. 6Y-6220 [1] BRACKET AS  
6. 6Y-4734 [1] BEARING-THRUST  
7. 8P-9770 [1] PLATE  
8. 6Y-7614 [1] GUARD  
9. 6Y-7616 [1] GUARD  
 

#SEBP51010371
 

8E-9495: BLADE AS-ANGLING

8E-9495 BLADE AS-ANGLING
S/N SBF1-UP
PART OF 8E-9494 BLADE GP-ANGLING
AN ATTACHMENT
i07219615 SEBP5101
8E9495 BLADE AS-ANGLING Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-6594 [2] STRIP-TAPPING  
2. 8E-9162 [1] BRACKET AS  
3. 4T-0172 [1] TRUNNION  
4. 6Y-4385 [1] SLEEVE  
5. 6Y-6220 [1] BRACKET AS  
6. 6Y-4734 [1] BEARING-THRUST  
7. 8P-9770 [1] PLATE  
 

#SEBP51010372
 

159-7966: BLADE GP-ANGLING

159-7966 BLADE GP-ANGLING
S/N JLB1-UP; SBF1-UP
PART OF 133-8973 BULLDOZER AR-ANGLING, 131-8430 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i03919655 SEBP5101
1597966 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-7967 Y [1] BLADE AS-ANGLING  
2. 8C-8843 [10] BOLT (1-8X4.5-IN)  
3. 8E-6235 [2] SHIM (40-MM THK)  
4. 6Y-7099 [2] SHIM (10-MM THK)  
5. 6Y-7100 [8] SHIM (2-MM THK)  
6. 6Y-6596 [2] PLATE-GUIDE  
7. 6Y-6582 [2] PLATE-WEAR  
8. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
9. 8C-4436 [1] BOLT (1/2-13X1.375-IN)  
10. 4T-0231 [1] RETAINER  
11. 3G-8917 [1] PIN  
12. 3G-8889 [2] SPACER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP51010373
 

293-8980: BLADE GP-ANGLING

293-8980 BLADE GP-ANGLING
S/N PWJ1-UP
PART OF 293-9000 BULLDOZER AR-ANGLING
AN ATTACHMENT
i03930510 SEBP5101
2938980 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-8917 [3] PIN  
2. 4T-1312 [4] SPACER (45X50X24.5-MM THK)  
3. 089-8249 [2] SPACER (64X72X13-MM THK)  
4. 214-2286 B [8] SHIM (0.8-MM THK)  
5. 214-2295 [2] ADAPTER  
6. 226-7191 [4] RETAINER  
7. 226-7192 [2] SPACER (50.8X57.15X25-MM THK)  
8. 245-1168 [1] PIN  
9. 293-8951 [4] PAD  
10. 293-8981 Y [1] BLADE & EDGE GP-ANGLING  
11. 7X-0515 [4] WASHER-HARD (17X35X5-MM THK)  
12. 7X-2553 M [4] BOLT (M16X2X40-MM)  
13. 7X-2577 M [8] BOLT (M24X3X90-MM)  
14. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51010374
 

8E-9494: BLADE GP-ANGLING

8E-9494 BLADE GP-ANGLING
S/N SBF1-UP
PART OF 133-8973 BULLDOZER AR-ANGLING
AN ATTACHMENT
i07219613 SEBP5101
8E9494 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9495 Y [1] BLADE AS-ANGLING  
2. 8C-8843 [10] BOLT (1-8X4.5-IN)  
3. 8E-6235 [2] SHIM (40-MM THK)  
4. 6Y-7099 [2] SHIM (10-MM THK)  
5. 6Y-7100 [8] SHIM (2-MM THK)  
6. 6Y-6596 [2] PLATE-GUIDE  
7. 6Y-6582 [2] PLATE-WEAR  
8. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
9. 8C-4436 [1] BOLT (1/2-13X1.375-IN)  
10. 4T-0231 [1] RETAINER  
11. 3G-8917 [1] PIN  
12. 3G-8889 [2] SPACER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP51010375
 

283-7655: BOOM GP-GRAPPLE

283-7655 BOOM GP-GRAPPLE
S/N JSR1-UP
PART OF 382-1329 GRAPPLE AR, 283-7646 GRAPPLE AR-SWING
AN ATTACHMENT
i03962258 SEBP5101
2837655 BOOM GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7Y-2496 B [6] SHIM (1.6-MM THK)  
3. 7Y-2498 B [6] SHIM (1.6-MM THK)  
4. 9C-7907 [1] SPACER (21.5X28X14-MM THK)  
5. 9R-8291 [4] SPACER (66X125X1-MM THK)  
6. 093-0086 B [6] SHIM (1-MM THK)  
7. 093-0115 B [4] SHIM (2-MM THK)  
8. 093-0118 B [6] SHIM (2-MM THK)  
9. 212-8082 [1] WASHER-SPECIAL  
10. 274-9393 [1] BOOM & BEARING AS  
10A. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
10B. 7Y-3427 [2] BUSHING  
11. 284-7025 [1] PIN AS  
12. 284-7027 [1] PIN AS  
13. 284-7029 [1] PIN AS  
14. 285-3836 [1] PLATE  
15. [2] FILM-IDENTIFICATION (CAT HOOD)  
16. 297-4700 [2] PLATE  
17. 096-0854 [2] SEAL-LIP TYPE  
18. 219-5757 [2] BOSS  
19. 266-7315 [3] WASHER-HARD (22X65X6-MM THK)  
20. 2J-0564 [1] LOCKNUT (2-12-THD)  
21. 8T-4123 [4] WASHER (3.62X5.75X0.375-MM THK)  
22. 8T-4131 M [4] NUT (M20X2.5-THD)  
23. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-6430 M [7] BOLT (M20X2.5X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP51010376
 

283-7656: BOOM GP-GRAPPLE

283-7656 BOOM GP-GRAPPLE
S/N JSR1-UP
PART OF 382-1329 GRAPPLE AR, 283-7646 GRAPPLE AR-SWING
AN ATTACHMENT
i03953853 SEBP5101
2837656 BOOM GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 283-0222 [1] BOOM AS  
1A. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
1B. 7Y-3427 [2] BUSHING  
2. 284-7048 [1] PIN AS  
3. 096-0854 [2] SEAL-LIP TYPE  
4. 264-3633 [1] NUT (M24X3-THD)  
5. 7X-2576 M [1] BOLT (M24X3X70-MM)  
6. 8T-4167 [2] WASHER-HARD (26X44X4-MM THK)  
  M   METRIC PART
 

#SEBP51010377
 

284-6683: CROSSHEAD GP-GRAPPLE

284-6683 CROSSHEAD GP-GRAPPLE
S/N JSR1-UP
PART OF 285-1274 GRAPPLE AR-BUNCHING, 285-1272 GRAPPLE AR-SORTING
AN ATTACHMENT
i03953843 SEBP5101
2846683 CROSSHEAD GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [10] FITTING-GREASE (1/8-27 PTF)  
2. 284-6652 [4] BEARING  
3. 284-6655 [2] SHAFT  
4. 284-6662 [2] SEAL  
5. 284-6665 [2] BEARING  
6. 284-6666 [2] SLEEVE  
7. 284-6668 [4] BOLT-ADJUSTMENT  
8. 284-6672 [2] SPRING  
9. 284-6678 [1] PLATE-REACTION  
10. 284-6679 [1] PLATE-REACTION  
11. 284-6680 [2] PLATE-RETAINER  
12. 284-6703 [1] LINK  
13. 1M-8949 [2] ROD  
14. 2J-0564 [2] LOCKNUT (2-12-THD)  
 

#SEBP51010378
 

293-8960: EDGE GP-BIT & CUTTING

293-8960 EDGE GP-BIT & CUTTING
S/N PWJ1-UP
PART OF 293-8981 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i03930469 SEBP5101
2938960 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-0731 [2] EDGE-CUTTING  
2. 140-6787 [1] BIT-END (RH)  
3. 140-6788 [1] BIT-END (LH)  
4. 268-9847 [1] EDGE-CUTTING  
5. 2J-3506 [23] NUT-FULL (3/4-10-THD)  
6. 5J-4773 [23] BOLT-PLOW (3/4-10X2.5-IN)  
7. 5P-8248 [23] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP51010379
 

8E-9380: EDGE GP-BIT & CUTTING

8E-9380 EDGE GP-BIT & CUTTING
S/N JLB1-UP; SBF1-UP
PART OF 159-7966, 8E-9494 BLADE GP-ANGLING
AN ATTACHMENT
i03919669 SEBP5101
8E9380 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9378 [1] BIT-END (LH)  
  8E-9379 [1] BIT-END (RH)  
2. 3G-4282 [2] EDGE-CUTTING  
3. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
4. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
5. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
 

Information:

Caterpillar Parts SIS Catalog 527 :

BLADE & EDGE GP-ANGLING
293-8981 BLADE & EDGE GP-ANGLING
WIPER PIVOT GP
101-0742 WIPER PIVOT GP
WIPER GP-WINDOW
8E-8707 WIPER GP-WINDOW
WINDOW GP-CAB
8Y-6442 WINDOW GP-CAB
WINDOW GP-CAB
8Y-6437 WINDOW GP-CAB
WINDOW GP-CAB
8E-4935 WINDOW GP-CAB
WINDOW GP-CAB
8E-4934 WINDOW GP-CAB
WINDOW AS-SLIDING
9G-4598 WINDOW AS-SLIDING
BLADE AS-ANGLING
8E-9495 BLADE AS-ANGLING
BLADE GP-ANGLING
159-7966 BLADE GP-ANGLING
BLADE GP-ANGLING
293-8980 BLADE GP-ANGLING
BLADE GP-ANGLING
8E-9494 BLADE GP-ANGLING
BOOM GP-GRAPPLE
283-7655 BOOM GP-GRAPPLE
BOOM GP-GRAPPLE
283-7656 BOOM GP-GRAPPLE
CROSSHEAD GP-GRAPPLE
284-6683 CROSSHEAD GP-GRAPPLE
EDGE GP-BIT & CUTTING
293-8960 EDGE GP-BIT & CUTTING

Truck sale:

Caterpillar 527, skidder, Forestry equipment
173,742 
Caterpillar 527, skidder, Forestry equipment
- skidder
FINNING CANADA
Caterpillar 527GROEM, skidder, Forestry equipment
369,700 
Caterpillar 527GROEM, skidder, Forestry equipment
- skidder
PETERSON CAT
Caterpillar 527, Forestry Equipment
195,000 USD 
Caterpillar 527, Forestry Equipment
- skidder
WESTERN STATES EQUIPMENT
Caterpillar 527GR, Forestry Equipment
209,122 
Caterpillar 527GR, Forestry Equipment
- skidder
FINNING CANADA
Canada
Caterpillar 527, Forestry Equipment
 
Caterpillar 527, Forestry Equipment
- skidder
PETERSON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.