AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

260-5331 WIRING GP-FRONT S/N SJM1-323 PART OF 322-4876 CHASSIS AR 907H COMPACT WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

COMPACT WHEEL LOADER 907H COMPACT WHEEL LOADER SJM
 907H Wheel Loader SJM00001-UP (MACHINE) POWERED BY C3.4 IND Engine SEBP5104 907H SJM   (2008)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CHASSIS
314-6658 WIRING GP-CHASSIS
WIRING GP-ENGINE
313-1724 WIRING GP-ENGINE
WIRING GP-FRONT
260-5331 WIRING GP-FRONT
WIRING GP-FRONT
260-5331 WIRING GP-FRONT
WIRING GP-FRONT
276-6814 WIRING GP-FRONT
260-5389 WIRING GP-WORK TOOL
 

#SEBP51040140
 

260-5331: WIRING GP-FRONT

260-5331 WIRING GP-FRONT
S/N SJM1-323
PART OF 322-4876 CHASSIS AR
i02985322 SEBP5104
2605331 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 164-9425 [1] HORN AS (12-VOLT, LOW TONE)  
3. 206-1345 [2] STRAP-CABLE  
4. 314-6663 C [1] HARNESS AS-FRONT CHASSIS  
  222-8935 [1] PLUG  
  245-8026 [4] PLUG AS-CONNECTOR (2-PIN)  
  8T-8737 [5] PLUG-SEAL  
  8T-8730 [28] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8Y-8080 E TUBE-CONVOLUTED (293-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(6-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(3-CM)  
5. 270-5143 BC [20] TIE-PUSH MOUNT  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
8. 7K-1181 [1] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP51040141
 

260-5331: WIRING GP-FRONT

260-5331 WIRING GP-FRONT
S/N SJM324-UP
PART OF 322-4876 CHASSIS AR
i04164329 SEBP5104
2605331 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 B [5] STRAP-CABLE  
2. 7K-1181 C [2] STRAP-CABLE  
3. 206-1345 [2] STRAP-CABLE  
4. 355-1859 CY [1] HARNESS AS-FRONT CHASSIS  
5. 270-5143 B [20] TIE-PUSH MOUNT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP51040142
 

276-6814: WIRING GP-FRONT

276-6814 WIRING GP-FRONT -BOOSTED AUXILIARY HYDRAULIC FLOW
S/N SJM1-UP
PART OF 281-2340, 340-5216 COUPLER AR-QUICK
AN ATTACHMENT
i02700476 SEBP5104
2766814 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-9593 [1] STRAP-CABLE  
2. 3S-2093 [10] STRAP-CABLE  
3. 7I-2673 [4] STRAP-CABLE  
4. 7K-1181 [3] STRAP-CABLE  
5. 268-1007 [1] STRAP-CABLE  
6. 270-5143 [10] TIE-PUSH MOUNT  
7. 276-6744 [1] HARNESS AS-CHASSIS (BOOSTED AUXILIARY HYD FLOW)  
  245-8026 [8] PLUG AS-CONNECTOR (2-PIN)  
  8T-8737 [8] PLUG-SEAL  
  8T-8730 [35] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  189-3158 [1] SUPPRESSOR-ARC  
  5P-5628 D TUBE (0.6-M)  
  8Y-8080 E TUBE-CONVOLUTED (80-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(3-CM)  
8. 314-6661 [1] HARNESS AS-POWER (FRONT)  
  262-9151 [8] PIN-CONNECTOR (12-GA TO 14-GA)  
  156-1458 [1] COVER  
  159-9496 [1] LOCKWASHER  
  159-9495 [1] NUT (1-1/2-18-THD)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(3-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP51040143
 

260-5389: WIRING GP-WORK TOOL

260-5389 WIRING GP-WORK TOOL -BOOSTED AUXILIARY HYDRAULIC FLOW
S/N SJM1-UP
PART OF 358-1316 DISTRIBUTION AR, 378-0561 WIRING GP-WORK TOOL
CANNOT BE USED WITH @@@@@281-2340@@@@@
AN ATTACHMENT
i02698935 SEBP5104
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  260-5524 Y [1] WIRING GP-CAB (WKTL, BOOSTED AUX FLOW SWITCH)  
  260-5390 Y [1] WIRING GP-WORK TOOL (BOOSTED AUX HYDRAULIC FLOW)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP51040144
 

260-5390: WIRING GP-WORK TOOL

260-5390 WIRING GP-WORK TOOL -BOOSTED AUXILIARY HYDRAULIC FLOW
S/N SJM1-UP
PART OF 260-5389 WIRING GP-WORK TOOL
AN ATTACHMENT
i02763912 SEBP5104
2605390 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-9593 [1] STRAP-CABLE  
2. 3S-2093 [7] STRAP-CABLE  
3. 7I-2673 [4] STRAP-CABLE  
4. 7K-1181 [2] STRAP-CABLE  
5. 260-5335 [1] HARNESS AS-WORK TOOL  
  245-8026 [1] PLUG AS-CONNECTOR (2-PIN)  
  8T-8737 [18] PLUG-SEAL  
  8T-8730 [11] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
6. 268-1007 [1] STRAP-CABLE  
7. 270-5143 [10] TIE-PUSH MOUNT  
8. 314-6661 [1] HARNESS AS-POWER (FRONT)  
  262-9151 [8] PIN-CONNECTOR (12-GA TO 14-GA)  
  156-1458 [1] COVER  
  159-9496 [1] LOCKWASHER  
  159-9495 [1] NUT (1-1/2-18-THD)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(3-CM)  
9. 315-6539 [1] PLATE  
10. 8W-8909 [1] SLEEVE  
  E   ORDER BY THE CENTIMETER
 

#SEBP51040145
 

378-0561: WIRING GP-WORK TOOL

378-0561 WIRING GP-WORK TOOL -BOOSTED AUXILIARY HYDRAULIC FLOW
S/N SJM1-UP
CANNOT BE USED WITH @@@@@257-4023@@@@@, @@@@@281-2340@@@@@, @@@@@340-5216@@@@@
AN ATTACHMENT
i04780223 SEBP5104
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  378-0559 Y [1] BRACKET GP-MOUNTING (WIRING, WORK TOOL)  
  260-5389 Y [1] WIRING GP-WORK TOOL (BOOSTED AUX HYDRAULIC FLOW)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP51040146
 

262-8641: AXLE & TRANSFER DRIVE GP-REAR

262-8641 AXLE & TRANSFER DRIVE GP-REAR -STANDARD, WITH DIFFERENTIAL LOCK
S/N SJM1-UP
PART OF 301-2971, 301-2973 POWER TRAIN AR
AN ATTACHMENT
i02700402 SEBP5104
2628641 AXLE & TRANSFER DRIVE GP-REAR Parts scheme
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-7505 M [4] SCREW-FLAT HEAD (M8X1.25X20-MM)  
2. 096-9986 M [8] BOLT (M12X1.75X55-MM)  
3. 5S-1522 [2] RING-SNAP  
4. 274-5246 [2] SEAL-LIP TYPE  
5. 209-9875 [2] DOWEL  
6. 219-8795 [1] CAP (PLASTIC)  
7. 152-6144 [1] PLUG AS-DRAIN (MAGNETIC)(TRANSFER DRIVE)  
  6V-6228 [1] SEAL-O-RING  
8. 209-7460 [2] BUSHING  
9. 208-0321 [5] BOLT-FLANGE HEAD (M12X1.75X33-MM)  
10. 293-8763 [5] BOLT (M12X1.75X75-MM)  
11. 6V-5684 M [16] BOLT (M12X1.75X45-MM)  
12. 253-5024 [1] BREATHER (AXLE, REAR)  
13. 292-5431 [2] SHAFT-AXLE  
14. 292-5432 [2] SHAFT-INTERMEDIATE  
15. 292-5433 [2] COUPLING-SHAFT  
16. 292-5372 [2] GEAR AS-RING  
    (EACH INCLUDES)
  209-4153 [1] GEAR (60-TEETH)  
16A. 209-4158 [8] BUSHING  
  209-4159 [1] CARRIER  
  209-7459 [1] RETAINER  
17. 292-5374 Y [2] PLANETARY GP-FINAL DRIVE  
18. 292-5375 Y [1] DRIVE GP-TRANSFER (HYDROSTATIC)  
19. 292-5393 [1] HOUSING-AXLE  
20. 292-5402 Y [2] FLANGE GP-WHEEL  
21. 292-5408 Y [1] DIFFERENTIAL & BEVEL GEAR GP (REAR, LOCKING, STANDARD AXLE)  
22. 223-8512 [2] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51040147
 

262-8650: AXLE & TRANSFER DRIVE GP-REAR

262-8650 AXLE & TRANSFER DRIVE GP-REAR -HIGH SPEED, WITH DIFFERENTIAL LOCK
S/N SJM1-UP
PART OF 301-2972, 301-2974 POWER TRAIN AR
AN ATTACHMENT
i02700412 SEBP5104
2628650 AXLE & TRANSFER DRIVE GP-REAR Parts scheme
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-7505 M [4] SCREW-FLAT HEAD (M8X1.25X20-MM)  
2. 105-3477 M [6] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
3. 5S-1522 [2] RING-SNAP  
4. 274-5246 [2] SEAL-LIP TYPE  
5. 223-8512 [2] SEAL-O-RING  
6. 209-9875 [2] DOWEL  
7. 152-6144 [2] PLUG AS-DRAIN (MAGNETIC)(TRANSFER DRIVE)  
    (EACH INCLUDES)
  6V-6228 [1] SEAL-O-RING  
8. 209-7460 [2] BUSHING  
9. 208-0321 [5] BOLT-FLANGE HEAD (M12X1.75X33-MM)  
10. 293-8763 [5] BOLT (M12X1.75X75-MM)  
11. 6V-5684 M [16] BOLT (M12X1.75X45-MM)  
12. 253-5024 [1] BREATHER (AXLE, REAR)  
13. 292-5431 [2] SHAFT-AXLE  
14. 292-5432 [2] SHAFT-INTERMEDIATE  
15. 292-5433 [2] COUPLING-SHAFT  
16. 292-5372 [2] GEAR AS-RING  
    (EACH INCLUDES)
  209-4153 [1] GEAR (60-TEETH)  
16A. 209-4158 [8] BUSHING  
  209-4159 [1] CARRIER  
  209-7459 [1] RETAINER  
17. 292-5374 Y [2] PLANETARY GP-FINAL DRIVE  
18. 292-5376 Y [1] DRIVE GP-TRANSFER (HYDROSTATIC, HIGH SPEED)  
19. 292-5393 [1] HOUSING-AXLE  
20. 292-5402 Y [2] FLANGE GP-WHEEL  
21. 292-5410 Y [1] DIFFERENTIAL & BEVEL GEAR GP (REAR, LOCKING, HIGH SPEED AXLE)  
22. 219-8795 [2] CAP (PLASTIC)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51040148
 

262-8639: AXLE GP-FRONT

262-8639 AXLE GP-FRONT -STANDARD, WITH DIFFERENTIAL LOCK
S/N SJM1-UP
PART OF 306-5422 AXLE GP-FRONT
AN ATTACHMENT
i02700400 SEBP5104
2628639 AXLE GP-FRONT Parts scheme 2628639 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-7505 M [4] SCREW-FLAT HEAD (M8X1.25X20-MM)  
2. 6V-4249 M [10] BOLT (M10X1.5X50-MM)  
3. 6V-5200 [2] RING-RETAINING  
4. 5S-1522 [2] RING-SNAP  
5. 274-5246 [2] SEAL-LIP TYPE  
7. 199-0667 [1] DOWEL  
8. 219-8795 [1] CAP  
9. 209-9875 [2] DOWEL  
10. 197-9155 [1] BREATHER (AXLE, FRONT)  
11. 152-6144 [1] PLUG AS-DRAIN (MAGNETIC)(AXLE, FRONT)  
  6V-6228 [1] SEAL-O-RING  
12. 209-7460 [2] BUSHING  
13. 208-0321 [7] BOLT-FLANGE HEAD (M12X1.75X33-MM)  
14. 293-8763 [5] BOLT (M12X1.75X75-MM)  
15. 157-0741 [1] SEAL-LIP TYPE  
16. 211-1316 [1] BRACKET  
17. 151-6856 J [1] BRAKE GP-HYDRAULIC CALIPER (PARKING, SERVICE)  
  5G-5703 [1] SCREW-PURGE  
  151-2628 [1] PAD-BRAKE  
  [1] KIT-BRAKE  
    (INCLUDES RETAINING PINS, RETAINING CLIPS, CLIPS, BLEED SCREW CAPS & PAD SPACER PLATES)
18. 6V-5684 M [16] BOLT (M12X1.75X45-MM)  
19. 292-5431 [2] SHAFT-AXLE  
20. 292-5432 [2] SHAFT-INTERMEDIATE  
21. 292-5433 [2] COUPLING-SHAFT  
22. 292-5372 [2] GEAR AS-RING  
    (EACH INCLUDES)
  209-4153 [1] GEAR (60-TEETH)  
22A. 209-4158 [8] BUSHING  
  209-4159 [1] CARRIER  
  209-7459 [1] RETAINER  
23. 292-5374 Y [2] PLANETARY GP-FINAL DRIVE  
24. 292-5387 [1] DISC-BRAKE  
25. 292-5393 [1] HOUSING-AXLE  
26. 292-5396 Y [1] DIFFERENTIAL & BEVEL GEAR GP (FRONT, LOCKING)  
27. 292-5402 Y [2] FLANGE GP-WHEEL  
28. 223-8512 [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  J [1] KIT-BRAKE (PARKING, SERVICE)  
    (INCLUDES RETAINING PINS, CLIPS, CAPS & PLATES)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51040149
 

262-8647: AXLE GP-FRONT

262-8647 AXLE GP-FRONT -HIGH SPEED, WITH DIFFERENTIAL LOCK
S/N SJM1-UP
PART OF 305-1933 AXLE GP-FRONT
AN ATTACHMENT
i02758276 SEBP5104
2628647 AXLE GP-FRONT Parts scheme 2628647 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 907H COMPACT WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-7505 M [4] SCREW-FLAT HEAD (M8X1.25X20-MM)  
2. 6V-4249 M [10] BOLT (M10X1.5X50-MM)  
3. 207-4255 [2] PLUG  
4. 6V-5200 [2] RING-RETAINING  
5. 293-4875 [2] RING-RETAINING  
6. 208-8978 [2] PLUG  
7. 199-0667 [1] DOWEL  
8. 293-2149 [4] DOWEL  
9. 219-8795 C [5] CAP  
10. 209-9875 [2] DOWEL  
11. 197-9155 [1] BREATHER (AXLE, FRONT)  
12. 165-7067 [2] DISC-BRAKE  
13. 168-7998 [6] PIN  
14. 165-8867 [2] SCREW-PURGE  
15. 152-6144 [1] PLUG AS-DRAIN (MAGNETIC)(AXLE, FRONT)  
  6V-6228 [1] SEAL-O-RING  
16. 165-7069 [2] PLATE-BRAKE  
17. 208-0321 C [5] BOLT-FLANGE HEAD (M12X1.75X33-MM)  
18. 293-8763 [5] BOLT (M12X1.75X75-MM)  
19. 178-9587 M [20] BOLT (M14X2X75-MM)  
20. 293-8735 [2] COUPLING-SHAFT  
21. 157-0741 [1] SEAL-LIP TYPE  
22. 211-1316 [1] BRACKET  
24. 293-8742 [2] SHAFT  
25. 292-5435 [2] SHAFT  
26. 292-5374 Y [2] PLANETARY GP-FINAL DRIVE  
27. 292-5387 [1] DISC-BRAKE  
28. 292-5396 Y [1] DIFFERENTIAL & BEVEL GEAR GP (FRONT, LOCKING)  
29. 292-5404 Y [2] WHEEL & BRAKE GP (FRONT)  
30. 292-5423 [1] HOUSING-AXLE  
31. 168-7999 [2] PIN-SPRING  
32. 4D-2297 [4] SEAL-O-RING  
33. 223-8512 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Testing and Adjusting
Electric Starting System - Test
C3.4 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 907H :

WIRING GP-ENGINE
313-1724 WIRING GP-ENGINE
WIRING GP-CHASSIS
314-6658 WIRING GP-CHASSIS
WIRING GP-CHASSIS
259-8001 WIRING GP-CHASSIS
WIRING GP-CAB
322-6676 WIRING GP-CAB
WIRING GP-CAB
322-6676 WIRING GP-CAB
WIRING GP-CAB
291-4622 WIRING GP-CAB
WIRING GP-CAB
260-5526 WIRING GP-CAB
WIRING GP-CAB
260-5526 WIRING GP-CAB
WIRING GP-FRONT
260-5331 WIRING GP-FRONT
WIRING GP-FRONT
276-6814 WIRING GP-FRONT
260-5389 WIRING GP-WORK TOOL
WIRING GP-WORK TOOL
260-5390 WIRING GP-WORK TOOL
378-0561 WIRING GP-WORK TOOL
AXLE & TRANSFER DRIVE GP-REAR
262-8641 AXLE & TRANSFER DRIVE GP-REAR
AXLE & TRANSFER DRIVE GP-REAR
262-8650 AXLE & TRANSFER DRIVE GP-REAR
AXLE GP-FRONT
262-8639 AXLE GP-FRONT

Truck sale:

 
 
Caterpillar 907H2
- Wheel loaders
WESTERN STATES EQUIPMENT
Caterpillar 907H2, Radlader, Bau-Und Bergbauausrüstung
75.298 
Caterpillar 907H2, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
CAVPOWER
Caterpillar 907H2, Radlader, Bau-Und Bergbauausrüstung
 
Caterpillar 907H2, Radlader, Bau-Und Bergbauausrüstung


Caterpillar 907H2, Construction
 
Caterpillar 907H2, Construction
- Wheel Loaders
ZEPPELIN OESTERREICH GMBH
Austria
Caterpillar 907H2, Construction
 
Caterpillar 907H2, Construction
- Wheel Loaders
BERGERAT MONNOYEUR ROMANIA
Romania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.