OPERATOR STATION
AIR CONDITIONER GPCONSOLE GP
CONTROL GP-HYDRAULIC
OPERATOR STATION
AIR CONDITIONER GP
#SEBP51100480
226-3561: COMPRESSOR GP-REFRIGERANT
226-3561 COMPRESSOR GP-REFRIGERANT
S/N THX1-UP
PART OF 264-0397 ENGINE AR-COMPLETE
S/N THX1-UP
PART OF 264-0397 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 147-3150 | [1] | ANGLE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 2. | 226-4864 | [1] | GUARD AS | |
| 3. | 130-5300 | [1] | CLIP | |
| 4. | 132-5789 | [1] | CLIP | |
| 5. | 245-7779 | [1] | COMPRESSOR GP-REFRIGERANT | |
| 236-6267 | [1] | COIL AS (24-VOLT) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE & WEDGE) | ||||
| 6. | 7X-2537 M | [2] | BOLT (M8X1.25X35-MM) | |
| 7. | 8T-3647 M | [4] | BOLT (M8X1.25X80-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 10. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP51100481
226-3561: COMPRESSOR GP-REFRIGERANT
226-3561 COMPRESSOR GP-REFRIGERANT
S/N THX33114-UP
PART OF 367-4316 ENGINE AR-COMPLETE
S/N THX33114-UP
PART OF 367-4316 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 147-3150 | [1] | ANGLE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 2. | 226-4864 | [1] | GUARD AS | |
| 3. | 130-5300 | [1] | CLIP | |
| 4. | 132-5789 | [1] | CLIP | |
| 5. | 305-0324 C | [1] | COMPRESSOR GP-REFRIGERANT | |
| 6. | 3S-2093 C | [1] | STRAP-CABLE | |
| 7. | 8T-3647 M | [4] | BOLT (M8X1.25X80-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 10. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 7X-2537 M | [2] | BOLT (M8X1.25X35-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP51100482
243-5686: CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-8284 | [1] | COVER | |
| 2. | 259-7348 CY | [1] | CONSOLE GP-OPERATOR (RH) | |
| 3. | 259-7349 CY | [1] | CONSOLE GP-OPERATOR (LH) | |
| 4. | [1] | PLATE | ||
| 5. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 6. | 9X-2043 M | [16] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51100483
243-5686: CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS#SEBP51100484
259-7348: CONSOLE GP-OPERATOR
259-7348 CONSOLE GP-OPERATOR -RH
S/N P2D1-UP
PART OF 243-5686 CONSOLE GP-OPERATOR
S/N P2D1-UP
PART OF 243-5686 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 128-2135 M | [4] | SCREW-TRUSS HEAD (M6X1X13-MM) | |
| 2. | 185-8284 | [1] | COVER | |
| 3. | 234-6579 | [2] | NUT-SPEED | |
| 4. | 234-6580 | [2] | CAP | |
| 5. | 234-6602 | [1] | COVER | |
| 6. | 234-6604 | [1] | COVER | |
| 7. | 234-6608 | [1] | COVER | |
| 8. | 234-6609 | [1] | COVER | |
| 9. | 234-6610 | [1] | COVER | |
| 10. | 235-8914 | [4] | NUT-SPEED | |
| 11. | 235-8966 | [2] | BASE-MOUNTING | |
| 12. | 245-7790 | [2] | SCREW-TAPPING | |
| 13. | 245-7926 | [1] | SUPPORT AS | |
| 14. | 245-7948 | [4] | SCREW-TAPPING | |
| 15. | 259-7346 Y | [1] | ARMREST GP (RH) | |
| 16. | 9X-2041 M | [3] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51100485
259-7349: CONSOLE GP-OPERATOR
259-7349 CONSOLE GP-OPERATOR -LH
S/N P2D1-UP
PART OF 243-5686 CONSOLE GP-OPERATOR
S/N P2D1-UP
PART OF 243-5686 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS#SEBP51100486
421-1434: CONSOLE GP-OPERATOR
421-1434 CONSOLE GP-OPERATOR -LH
S/N P2D1-UP
PART OF 259-7349 CONSOLE GP-OPERATOR
S/N P2D1-UP
PART OF 259-7349 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 128-2135 M | [5] | SCREW-TRUSS HEAD (M6X1X13-MM) | |
| 2. | 171-7325 M | [3] | SCREW-TAPPING (M5X0.8-THD) | |
| 3. | 234-6579 | [6] | NUT-SPEED | |
| 4. | 234-6580 | [4] | CAP | |
| 5. | 234-6603 | [1] | COVER | |
| 6. | 234-6605 | [1] | COVER | |
| 7. | 234-6608 | [1] | COVER | |
| 8. | 234-6609 | [1] | COVER | |
| 9. | 234-6610 | [1] | COVER | |
| 11. | 234-6612 | [1] | COVER | |
| 12. | 234-6613 Y | [1] | LEVER GP-CONTROL (HYDRAULIC LOCKOUT) | |
| 13. | 234-6614 | [1] | COVER | |
| 14. | 235-8914 | [4] | NUT-SPEED | |
| 15. | 235-8965 | [1] | GUARD | |
| 16. | 245-7790 | [3] | SCREW-TAPPING | |
| 17. | 245-7925 | [1] | SUPPORT AS | |
| 18. | 245-7948 | [7] | SCREW-TAPPING | |
| 19. | 259-7202 | [1] | ASHTRAY | |
| 20. | 259-7347 Y | [1] | ARMREST GP (LH) | |
| 21. | 9X-2041 M | [3] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 22. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51100487
223-0671: CONTROL & MTG GP-JOYSTICK
223-0671 CONTROL & MTG GP-JOYSTICK -HARVESTER HEAD
S/N P2D1-UP
PART OF 282-3068 HYDRAULIC AR-HARVESTER, 252-8713 LINKAGE AR-HARVESTER HEAD
AN ATTACHMENT
S/N P2D1-UP
PART OF 282-3068 HYDRAULIC AR-HARVESTER, 252-8713 LINKAGE AR-HARVESTER HEAD
AN ATTACHMENT
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-4685 | [6] | BLOCK | |
| 2. | 223-0539 | [2] | CONTROL GP-PEDAL (TRAVEL) | |
| (EACH INCLUDES) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 3. | 283-2395 CY | [1] | CONTROL GP-JOYSTICK (HARVESTER HEAD, RH) | |
| 4. | 283-2394 CY | [1] | CONTROL GP-JOYSTICK (HARVESTER HEAD, LH) | |
| 5. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 6. | 224-8173 | [4] | PLATE | |
| 7. | 8T-2947 M | [6] | BOLT (M6X1X45-MM) | |
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| 265-7988 F | [1] | FILM-INSTRUCTION (HARVESTER HEAD CONTROL) | ||
| (ADD TO RIGHT WINDOW NEAR BOTTOM OF WINDOW) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51100488
224-4990: CONTROL & MTG GP-JOYSTICK
224-4990 CONTROL & MTG GP-JOYSTICK -FELLING HEAD
S/N P2D1-UP
PART OF 282-2698 OPERATOR AR
Type 1
S/N P2D1-UP
PART OF 282-2698 OPERATOR AR
Type 1
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-4685 | [6] | BLOCK | |
| 2. | 223-0539 | [2] | CONTROL GP-PEDAL (TRAVEL) | |
| (EACH INCLUDES) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 3. | 283-2393 CY | [2] | CONTROL GP-JOYSTICK (FELLING HEAD) | |
| 4. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 5. | 224-8173 | [4] | PLATE | |
| 6. | 8T-2947 M | [6] | BOLT (M6X1X45-MM) | |
| 7. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51100489
224-4990: CONTROL & MTG GP-JOYSTICK
224-4990 CONTROL & MTG GP-JOYSTICK -FELLING HEAD
S/N P2D1-UP
PART OF 282-2698 OPERATOR AR
Type 2
S/N P2D1-UP
PART OF 282-2698 OPERATOR AR
Type 2
For full view, you need register
Parts for your 2290 TRACK FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-0539 | [2] | CONTROL GP-PEDAL (TRAVEL) | |
| (EACH INCLUDES) | ||||
| 186-3735 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 224-8173 | [4] | PLATE | |
| 3. | 297-6429 C | [1] | BRACKET AS (LH) | |
| 4. | 297-6430 C | [1] | BRACKET AS (RH) | |
| 5. | 297-6439 C | [2] | PLATE | |
| 6. | 307-5476 C | [2] | TAPE | |
| 7. | 335-4173 C | [1] | CONTROL GP-HAND | |
| 8. | 335-4174 C | [1] | CONTROL GP-HAND | |
| 9. | 7X-2619 CM | [6] | BOLT (M6X1X10-MM) | |
| 10. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| 12. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
Information:
OPERATOR STATION
AIR CONDITIONER GP
Operation and Maintenance Manual
Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace
2290, 2390, 2391 and 2491 Track Feller Bunchers
2290, 2390, 2391 and 2491 Track Feller Bunchers
Special Instruction
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Testing the Refrigerant Compressor Protection Module{1408, 1802}
Testing the Refrigerant Compressor Protection Module{1408, 1802}
Testing the Refrigerant Compressor Protection Module{1408, 1802}
Specifications
System Capacities for Refrigerant (Forest Products)
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Systems Operation
Refrigerant Compressor Protection System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Air Conditioning System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Cab Pressurization and Filtration System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Testing and Adjusting
Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Remove
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Testing and Adjusting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting
Machine Preparation for Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Condensate Drainage System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Heating and Air Conditioning Control System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Disassembly and Assembly
Refrigerant Expansion Valve - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Evaporator Coil - Remove and Install
2290, 2390, 2391 and 2491 Track Feller Bunchers Machine Systems
2290, 2390, 2391 and 2491 Track Feller Bunchers Machine Systems
Refrigerant Condenser - Remove and Install
2290, 2390, 2391 and 2491 Track Feller Bunchers Engine Supplement
2290, 2390, 2391 and 2491 Track Feller Bunchers Engine Supplement
Blower Motor (Air Conditioner, Heater) - Remove and Install
2290, 2390, 2391 and 2491 Track Feller Bunchers Machine Systems
2290, 2390, 2391 and 2491 Track Feller Bunchers Machine Systems
Refrigerant Compressor - Remove and Install - Engine In Chassis
2290, 2390, 2391 and 2491 Track Feller Bunchers Engine Supplement
2290, 2390, 2391 and 2491 Track Feller Bunchers Engine Supplement
Air Conditioner Lines - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
In-Line Refrigerant Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Magazine
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
