ELECTRICAL AND STARTING SYSTEM
SWITCH GPWIRING GP
POWER TRAIN
AXLE GPELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBP51120170
7N-8001: SWITCH GP-TOGGLE
For full view, you need register
#SEBP51120171
351-9863: WIRING GP-CAB
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 | [22] | STRAP-CABLE | |
| 3. | 107-6032 | [1] | LAMP AS-DOME (24-VOLT) | |
| 259-1286 | [1] | LAMP (24-VOLT, 10-WATT) | ||
| 4. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 117-2311 | [2] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 6. | 163-1201 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 7. | 166-8075 | [4] | WASHER (5.2X11.2X0.8-MM THK) | |
| 8. | 217-5364 | [1] | ALARM | |
| 9. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 10. | 274-7921 | [1] | CONTROL GP-MACHINE (IQAN, XA MODULE) | |
| 11. | 345-1031 | [1] | SPEAKER AS | |
| 12. | 345-1929 | [1] | CONVERTER | |
| 13. | 351-9868 Y | [1] | HARNESS AS-CONSOLE | |
| 14. | 352-8500 Y | [1] | HARNESS AS-CAB (HEADLINER) | |
| 15. | 354-1827 | [1] | CONTROLLER | |
| 16. | 354-1859 Y | [1] | HARNESS AS-LIGHTING | |
| 17. | 360-8837 | [1] | MODULE GP-KEYPAD | |
| 8F-1326 | [4] | WASHER (4.2X9.5X0.8-MM THK) | ||
| 8T-2659 M | [4] | LOCKNUT (M4X0.7-THD) | ||
| 18. | 364-4648 Y | [1] | PEDAL GP | |
| 19. | 364-4777 Y | [1] | HARNESS AS-CONTROL (JOYSTICK) | |
| 20. | 364-4778 Y | [1] | HARNESS AS-LIGHTING (RH) | |
| 21. | 033-4814 | [4] | SCREW (10-32X1-IN) | |
| 22. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 23. | 107-1964 | [4] | SCREW-PAN HEAD (6-19X0.5-IN) | |
| 24. | 123-0707 M | [12] | SCREW-HEX SOCKET (M4X0.7X20-MM) | |
| 25. | 128-6157 | [1] | PLATE | |
| 26. | 134-3988 | [1] | CLIP (LOOP) | |
| 27. | 141-4976 | [4] | SCREW-WASHER HEAD (4-40X0.5-IN) | |
| 28. | 154-8079 M | [8] | NUT-RETAINER | |
| 29. | 244-2331 | [4] | WASHER (4X8X1-MM THK) | |
| 30. | 4D-1836 | [1] | SWITCH-TOGGLE (TRACTION CONTROL SYSTEM) | |
| 31. | 4P-8134 | [3] | CLIP (LADDER) | |
| 32. | 5C-2890 M | [6] | NUT (M6X1-THD) | |
| 33. | 5C-8312 M | [6] | NUT (M4X0.7-THD) | |
| 34. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 35. | 6V-5698 M | [4] | SCREW-BUTTON HEAD (M4X0.7X10-MM) | |
| 36. | 8T-3991 M | [2] | SCREW-BUTTON HEAD (M6X1X20-MM) | |
| 37. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 39. | 8T-8137 | [1] | SEAL-FACE | |
| 40. | 8T-4138 M | [5] | BOLT (M6X1X20-MM) | |
| 41. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 42. | 8T-4205 | [13] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51120172
363-0647: WIRING GP-CEM
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 290-1993 | [27] | STRAP-CABLE | |
| 2. | 295-6244 | [1] | WIRE AS-IGNITION | |
| 3. | 315-0225 | [1] | CLAMP-WIRE | |
| 4. | 318-9355 | [1] | MOUNTING-CABLE TIE | |
| 5. | 341-4176 | [1] | SENSOR GP-TEMPERATURE (DUAL SENSOR- DPF, FLAME DETECT) | |
| 6. | 342-9070 | [1] | RECEPTACLE AS (AFTERTREATMENT IDENTIFICATION) | |
| 5P-5677 D | WIRE (18-GA, BLACK)(0.2-M) | |||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-8812 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 7. | 347-3880 | [1] | BRACKET | |
| 8. | 347-9210 | [1] | SPACER (11X26X60-MM THK) | |
| 9. | 348-2666 | [1] | BRACKET | |
| 10. | 349-9457 | [1] | BRACKET | |
| 11. | 352-4756 | [1] | HARNESS AS-CEM (NOZZLE HEATER) | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 296-3295 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 317-7377 | [1] | CONNECTOR AS | ||
| 9N-1756 | [1] | SEAL-O-RING | ||
| 317-0808 | [2] | SEAL-O-RING | ||
| 348-1879 E | SLEEVE (132-CM) | |||
| 369-9841 | [1] | STRAP-CABLE | ||
| 12. | 364-8334 | [1] | PLATE AS | |
| 13. | 366-6037 Y | [1] | WIRING GP-ENGINE | |
| 14. | 294-3313 | [1] | CLIP (LADDER) | |
| 15. | 311-8366 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 341-3624 | [3] | CLIP (LADDER) | |
| 17. | 344-1190 | [1] | BOLT (M10X1.5X80-MM) | |
| 18. | 344-1192 M | [5] | BOLT (M8X1.25X20-MM) | |
| 19. | 344-1199 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 344-1200 | [5] | WASHER-HARD (6.6X12X2-MM THK) | |
| 21. | 344-1201 | [5] | BOLT (M10X1.5X20-MM) | |
| 22. | 344-1205 | [1] | BOLT (M6X1X12-MM) | |
| 23. | 344-1206 M | [5] | BOLT (M6X1X16-MM) | |
| 24. | 344-5673 M | [1] | NUT (M6X1-THD) | |
| 25. | 4P-5918 | [1] | CLIP | |
| 26. | 8T-9405 M | [1] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51120173
351-9865: WIRING GP-ENGINE
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [38] | STRAP-CABLE | |
| 2. | 198-9365 | [3] | CLIP | |
| 3. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 5. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(INLET AIR) | |
| 6. | 256-6454 | [1] | SENSOR-TEMPERATURE (2-PIN)(CHARGE AIR) | |
| 7. | 261-0420 | [2] | SENSOR GP-PRESSURE (AUXILIARY) | |
| 8. | 331-6036 | [7] | CLIP (LOOP) | |
| 9. | 351-9870 | [1] | HARNESS AS-ENGINE | |
| 8N-1542 | [1] | PIN-CONNECTOR (10-GA) | ||
| 8N-1545 | [1] | SOCKET-CONNECTOR (8-GA) | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [29] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [71] | PLUG-SEAL | ||
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 110-6844 | [1] | SEAL | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM) | |||
| 9X-3402 | [95] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [95] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5485 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 2L-8050 | [1] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [1] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 2L-8054 | [1] | TERMINAL-RING (6-GA, 1/2-IN SCREW) | ||
| -OR- | ||||
| 2L-8061 | [1] | TERMINAL-RING (8-GA, 1/2-IN SCREW) | ||
| 176-9299 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [22] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [22] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 167-3693 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 176-1477 | [1] | PLUG AS (2-PIN) | ||
| 176-1521 | [2] | TERMINAL | ||
| 185-1861 | [3] | SEAL-WIRE | ||
| 247-5009 | [3] | TERMINAL (14-GA TO 16-GA) | ||
| 225-3854 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 230-4011 | [3] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 281-8811 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 324-6266 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 110-6844 | [1] | SEAL | ||
| 10. | 354-1876 | [1] | BRACKET | |
| 11. | 364-8015 | [1] | SENSOR GP-SOOT (EXHAUST) | |
| 281-8812 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 12. | 364-4712 | [1] | FAN AS | |
| 13. | 419-3130 | [1] | CONTROLLER | |
| 14. | 228-7103 | [1] | SEAL-O-RING | |
| 15. | 3J-1907 | [2] | SEAL-O-RING | |
| 16. | 4P-8134 | [13] | CLIP (LADDER) | |
| 17. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 18. | 6V-6609 | [1] | SEAL-O-RING | |
| 19. | 7G-7053 | [3] | GROMMET | |
| 20. | 8T-0286 M | [5] | BOLT (M5X0.8X8-MM) | |
| 21. | 8T-0328 | [5] | WASHER-HARD (5.5X10X1-MM THK) | |
| 22. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 24. | 8T-4137 M | [12] | BOLT (M10X1.5X20-MM) | |
| 26. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 27. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 28. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 30. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 31. | 363-0591 | [1] | INDICATOR AS-AIR FILTER CHANGE | |
| 32. | 6P-6641 | [1] | GROMMET | |
| 33. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 34. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FAN) | |
| 35. | 8C-8451 M | [2] | BOLT (M6X1X40-MM) | |
| 36. | 2A-2677 | [2] | SPACER (10.7X17.14X19.05-MM THK) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP51120174
356-1108: WIRING GP-ENGINE
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 236-5539 | [1] | CLIP | |
| 2. | 254-3633 M | [3] | BOLT-FLANGE HEAD (M6X1X16-MM, SELF LOCKING) | |
| 3. | 351-4770 | [1] | BRACKET | |
| 4. | 290-1993 | [2] | STRAP-CABLE | |
| 5. | 310-0674 | [1] | LOCKWASHER | |
| 6. | 334-5091 | [1] | BRACKET | |
| 7. | 344-5062 | [1] | BRACKET | |
| 8. | 381-3508 | [1] | BRACKET | |
| 9. | 356-0863 | [1] | BRACKET | |
| 10. | 359-7196 | [1] | BRACKET | |
| 11. | 364-0610 Y | [1] | HARNESS AS-ENGINE | |
| 12. | 367-6803 | [3] | HARNESS AS-WIRING | |
| 12A. | 323-7347 | [1] | SEAL-O-RING | |
| 13. | 100-4458 M | [1] | BOLT (M8X1.25X14-MM) | |
| 14. | 124-3815 M | [4] | BOLT (M8X1.25X16-MM) | |
| 15. | 211-0052 | [1] | NUT (1-11/16-18-THD) | |
| 16. | 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | |
| 17. | 6I-0846 M | [3] | BOLT (M6X1X14-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51120175
366-6037: WIRING GP-ENGINE
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS#SEBP51120176
366-6037: WIRING GP-ENGINE
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS#SEBP51120177
351-9862: WIRING GP-FRONT
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [7] | STRAP-CABLE | |
| 2. | 194-2553 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 4. | 198-9365 | [4] | CLIP | |
| 5. | 274-7921 | [1] | CONTROL GP-MACHINE (IQAN, XA MODULE) | |
| 6. | 327-4608 | [1] | SWITCH AS-PRESSURE (ACCUMULATOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 | [28] | SLEEVE | ||
| 7. | 351-9867 | [1] | HARNESS AS-CHASSIS (FRONT FRAME) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [37] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [5] | KIT-CONNECTING PLUG (3-PIN) | ||
| 174-0503 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 183-7749 | [1] | CONNECTOR | ||
| 202-5414 | [1] | RESISTOR AS | ||
| [2] | TERMINAL AS | |||
| (EACH INCLUDES) | ||||
| 185-1861 | [1] | SEAL-WIRE | ||
| [2] | TERMINAL AS | |||
| (EACH INCLUDES) | ||||
| 158-6706 | [1] | TERMINAL (18-GA) | ||
| 185-1860 | [1] | SEAL-WIRE | ||
| [26] | TERMINAL AS | |||
| (EACH INCLUDES) | ||||
| 247-5008 | [1] | TERMINAL (18-GA) | ||
| 279-5772 | [1] | SEAL | ||
| 8. | 352-5527 | [1] | HARNESS AS-FRONT | |
| 6V-2722 E | TUBE-HEAT SHRINK (25.4-MM DIA)(3-CM) | |||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 122-6871 | [45] | HOSE-HYDRAULIC | ||
| 155-2271 | [4] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| 174-0503 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9. | 364-4786 | [1] | PLATE | |
| 10. | 3J-1907 | [2] | SEAL-O-RING | |
| 11. | 6V-1889 | [2] | CLIP (LOOP) | |
| 12. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 13. | 7X-2548 M | [1] | BOLT (M12X1.75X16-MM) | |
| 14. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 18. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 19. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP51120178
351-9864: WIRING GP-REAR
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [31] | STRAP-CABLE | |
| 2. | 198-9365 | [4] | CLIP | |
| 3. | 229-8757 | [2] | SWITCH AS-LIMIT (DOOR) | |
| (EACH INCLUDES) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 5. | 306-6875 Y | [2] | SENSOR GP-LIQUID LEVEL (TRANSMISSION OIL) | |
| 6. | 331-7352 Y | [1] | SENSOR GP-LIQUID LEVEL (COOLANT LEVEL) | |
| 7. | 351-9869 | [1] | HARNESS AS-CHASSIS (REAR FRAME) | |
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 225-3854 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-5239 | [1] | RELAY AS (24-VOLT) | ||
| 8N-1543 | [1] | SOCKET-CONNECTOR (10-GA) | ||
| 8N-1544 | [1] | PIN-CONNECTOR (8-GA) | ||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [26] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 9X-1056 | [2] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 127-5485 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 128-4249 | [1] | LOCKWASHER | ||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 9X-3401 | [56] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [56] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 5P-2766 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 6 SCREW) | ||
| 8. | 354-1837 | [1] | HARNESS AS-SOLENOID (LOWER CAB) | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [20] | PLUG-SEAL | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [16] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9G-4336 | [1] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [5] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 167-3693 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 9. | 354-1869 | [1] | CABLE AS | |
| 6V-2369 D | CABLE (4-GA, BLACK)(0.3-M) | |||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 9G-4336 | [1] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 10. | 354-1876 | [1] | BRACKET | |
| 11. | 3K-0360 | [1] | SEAL-O-RING | |
| 12. | 4P-8134 | [11] | CLIP (LADDER) | |
| 13. | 6V-4589 | [2] | SEAL-O-RING | |
| 14. | 7G-7053 | [1] | GROMMET | |
| 15. | 7N-8001 Y | [1] | SWITCH GP-TOGGLE (HYDRAULIC OIL FILL) | |
| 16. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 18. | 8T-4137 M | [13] | BOLT (M10X1.5X20-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51120179
344-1032: AXLE AR-FIXED
For full view, you need register
Parts for your 2570C WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 139-4126 Y | [2] | BRAKE & PLANETARY GP | ||
| 391-2169 Y | [1] | DIFFERENTIAL GP | ||
| 139-4183 Y | [1] | GEAR GP-BEVEL & PINION | ||
| 344-1028 Y | [1] | HOUSING GP-FIXED AXLE | ||
| 220-7925 | [1] | PLATE GP-AXLE IDENTIFICATION | ||
| 109-8895 | [1] | PLATE-IDENTIFICATION (LOGGING SKID) | ||
| 220-3681 B | [1] | TAPE | ||
| -OR- | ||||
| 082-2817 | [4] | TACK | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
