366-6037 WIRING GP-ENGINE S/N B3E1-UP PART OF 389-2732 WIRING GP-CEM Type 2 2670C WHEEL FELLER BUNCHER

366-6037: WIRING GP-ENGINE

366-6037 WIRING GP-ENGINE
S/N B3E1-UP
PART OF 389-2732 WIRING GP-CEM
Type 2

Parts for your 2670C WHEEL FELLER BUNCHER:

Pos.	Part No	Qty	Parts name
1.	7K-1181	[4]	STRAP-CABLE
2.	346-1264	[1]	BRACKET
3.	363-0662 Y	[1]	HARNESS AS-WIRING
	Y		SEPARATE ILLUSTRATION

351-9862: WIRING GP-FRONT

WIRING GP-FRONT

351-9862 WIRING GP-FRONT
S/N B3E1-UP
PART OF 351-9866 ELECTRICAL AR

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[7]	STRAP-CABLE
2.	194-2553	[1]	SWITCH AS-PRESSURE (PARKING BRAKE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	178-3620	[1]	STRAP-DUAL CLAMP
4.	198-9365	[4]	CLIP
5.	274-7921	[1]	CONTROL GP-MACHINE (IQAN, XA MODULE)
6.	327-4608	[1]	SWITCH AS-PRESSURE (ACCUMULATOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813	[28]	SLEEVE
7.	351-9867	[1]	HARNESS AS-CHASSIS (FRONT FRAME)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[37]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[6]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	183-7749	[1]	CONNECTOR
	202-5414	[1]	RESISTOR AS
		[2]	TERMINAL AS
			(EACH INCLUDES)
	185-1861	[1]	SEAL-WIRE
		[2]	TERMINAL AS
			(EACH INCLUDES)
	158-6706	[1]	TERMINAL (18-GA)
	185-1860	[1]	SEAL-WIRE
		[26]	TERMINAL AS
			(EACH INCLUDES)
	247-5008	[1]	TERMINAL (18-GA)
	279-5772	[1]	SEAL
8.	352-5527	[1]	HARNESS AS-FRONT
	6V-2722 E		TUBE-HEAT SHRINK (25.4-MM DIA)(3-CM)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[3]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	122-6871	[45]	HOSE-HYDRAULIC
	155-2271	[4]	KIT-CONNECTING PLUG (4-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9.	364-4786	[1]	PLATE
10.	3J-1907	[2]	SEAL-O-RING
11.	6V-1889	[2]	CLIP (LOOP)
12.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
13.	7X-2548 M	[1]	BOLT (M12X1.75X16-MM)
14.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4133 M	[2]	NUT (M10X1.5-THD)
16.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
17.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
18.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
19.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
20.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

351-9864: WIRING GP-REAR

WIRING GP-REAR

351-9864 WIRING GP-REAR
S/N B3E1-UP
PART OF 351-9866 ELECTRICAL AR

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[31]	STRAP-CABLE
2.	198-9365	[4]	CLIP
3.	229-8757	[2]	SWITCH AS-LIMIT (DOOR)
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)
	137-6645	[1]	PAD-CONNECTOR
5.	306-6875 Y	[2]	SENSOR GP-LIQUID LEVEL (TRANSMISSION OIL)
6.	331-7352 Y	[1]	SENSOR GP-LIQUID LEVEL (COOLANT LEVEL)
7.	351-9869	[1]	HARNESS AS-CHASSIS (REAR FRAME)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	155-2270	[9]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
	167-3692	[1]	RECEPTACLE AS-CONNECTOR (31-PIN)
	189-3158	[1]	SUPPRESSOR-ARC
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	225-3854	[1]	PLUG AS-CONNECTOR (31-PIN)
	211-0052	[1]	NUT (1-11/16-18-THD)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3E-5239	[1]	RELAY AS (24-VOLT)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	8N-1544	[1]	PIN-CONNECTOR (8-GA)
	8N-1548	[1]	PIN-CONNECTOR (4-GA)
	8N-1549	[1]	SOCKET-CONNECTOR (4-GA)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[26]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[7]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	9X-1056	[2]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	100-5041	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	128-4249	[1]	LOCKWASHER
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	9X-3401	[56]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[56]	PIN-CONNECTOR (14-GA TO 16-GA)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	5P-2766	[1]	TERMINAL-RING (18-GA TO 22-GA, NO. 6 SCREW)
8.	354-1837	[1]	HARNESS AS-SOLENOID (LOWER CAB)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[20]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	9X-3402	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[16]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9G-4336	[1]	TERMINAL-RING (4-GA, 3/8-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
	167-3693	[1]	PLUG AS-CONNECTOR (31-PIN)
9.	354-1869	[1]	CABLE AS
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	9G-4336	[1]	TERMINAL-RING (4-GA, 3/8-IN SCREW)
10.	354-1876	[1]	BRACKET
11.	3K-0360	[1]	SEAL-O-RING
12.	4P-8134	[11]	CLIP (LADDER)
13.	6V-4589	[2]	SEAL-O-RING
14.	7G-7053	[1]	GROMMET
15.	7N-8001 Y	[1]	SWITCH GP-TOGGLE (HYDRAULIC OIL FILL)
16.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4133 M	[2]	NUT (M10X1.5-THD)
18.	8T-4137 M	[13]	BOLT (M10X1.5X20-MM)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

344-1032: AXLE AR-FIXED

AXLE AR-FIXED

344-1032 AXLE AR-FIXED
S/N B3E1-UP
PART OF 352-9776 POWER TRAIN AR

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Part No	Qty	Parts name
139-4126 Y	[2]	BRAKE & PLANETARY GP
391-2169 Y	[1]	DIFFERENTIAL GP
139-4183 Y	[1]	GEAR GP-BEVEL & PINION
344-1028 Y	[1]	HOUSING GP-FIXED AXLE
220-7925	[1]	PLATE GP-AXLE IDENTIFICATION
109-8895	[1]	PLATE-IDENTIFICATION (LOGGING SKID)
220-3681 B	[1]	TAPE
		-OR-
082-2817	[4]	TACK
B		USE AS REQUIRED
Y		SEPARATE ILLUSTRATION

344-1030: AXLE AR-OSCILLATING

AXLE AR-OSCILLATING

344-1030 AXLE AR-OSCILLATING
S/N B3E1-163
PART OF 352-9776 POWER TRAIN AR

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Part No	Qty	Parts name
275-9432 Y	[1]	DIFFERENTIAL GP
139-4183 Y	[1]	GEAR GP-BEVEL & PINION
344-1029 Y	[1]	HOUSING GP-OSCILLATING AXLE
209-9298 Y	[2]	PLANETARY GP-FINAL DRIVE
Y		SEPARATE ILLUSTRATION

388-7376: AXLE AR-OSCILLATING

AXLE AR-OSCILLATING

388-7376 AXLE AR-OSCILLATING
S/N B3E164-UP
PART OF 352-9776 POWER TRAIN AR

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Part No	Qty	Parts name
391-2169 Y	[1]	DIFFERENTIAL GP
139-4183 Y	[1]	GEAR GP-BEVEL & PINION
388-8617 Y	[1]	HOUSING GP-AXLE
209-9298 Y	[2]	PLANETARY GP-FINAL DRIVE
220-7925	[1]	PLATE GP-AXLE IDENTIFICATION
109-8895	[1]	PLATE-IDENTIFICATION (LOGGING SKID)
220-3681 B	[1]	TAPE
		-OR-
082-2817	[4]	TACK
B		USE AS REQUIRED
Y		SEPARATE ILLUSTRATION

139-4126: BRAKE & PLANETARY GP

BRAKE & PLANETARY GP

139-4126 BRAKE & PLANETARY GP
S/N B3E1-UP
PART OF 344-1032 AXLE AR-FIXED

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-2925	[3]	PIN-SPRING
2.	138-1645	[3]	PIN-SPRING
3.	143-7155	[1]	PISTON
4.	143-7156	[1]	PLATE-REACTION
5.	143-7157	[1]	CARRIER-PLANETARY
6.	143-7345	[1]	SEAL
7.	143-7352	[1]	SEAL
8.	444-2262	[6]	WASHER-THRUST
9.	143-7509	[3]	SHAFT-PLANETARY
10.	143-7510	[3]	BUSHING
11.	469-0883	[4]	DOWEL
12.	139-4130	[1]	GEAR-SUN (15-TEETH)
13.	384-6493	[1]	GEAR-RING (66-TEETH)
14.	143-7154	[3]	GEAR-PLANETARY (24-TEETH)
15.	334-1030	[1]	DISC-FRICTION
16.	3P-7832	[4]	DOWEL
17.	9C-9844	[4]	SPRING

275-9432: DIFFERENTIAL GP

DIFFERENTIAL GP

275-9432 DIFFERENTIAL GP
S/N B3E1-163
PART OF 344-1030 AXLE AR-OSCILLATING

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4V-5392	[1]	SPIDER
2.	9C-6016	[4]	PINION-DIFFERENTIAL BEVEL (11-TEETH)
3.	144-0496	[4]	SPRING
4.	151-4809	[4]	BUSHING
5.	201-8476	[7]	PLATE-SEPARATOR
6.	201-8477	[7]	DISC-FRICTION
7.	217-3681	[4]	WASHER-THRUST
8.	275-9428	[1]	RING-THRUST
9.	275-9430	[1]	PLATE
10.	275-9433	[1]	CASE AS-DIFFERENTIAL
	2S-5658	[4]	WASHER-HARD (17X29X3-MM THK)
	6V-8154 M	[4]	BOLT (M16X2X150-MM)
	7X-0591	[4]	WASHER-HARD (17X29X3-MM THK)
11.	279-9693	[1]	PISTON
12.	287-6895	[1]	GEAR-DIFFERENTIAL BEVEL (16-TEETH)
13.	305-3351	[2]	WASHER-THRUST
14.	307-6135	[4]	PIN-GROOVED
15.	308-0888	[1]	BEARING AS
16.	361-6585	[1]	GEAR-DIFFERENTIAL BEVEL (16-TEETH)
17.	156-5198	[1]	SEAL-O-RING
18.	5P-8428	[1]	SEAL-O-RING

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	M		METRIC PART

391-2169: DIFFERENTIAL GP

DIFFERENTIAL GP

391-2169 DIFFERENTIAL GP
S/N B3E1-UP
PART OF 344-1032 AXLE AR-FIXED, 388-7376 AXLE AR-OSCILLATING

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4V-5392	[1]	SPIDER
2.	9C-6016	[4]	PINION-DIFFERENTIAL BEVEL (11-TEETH)
3.	144-0496	[4]	SPRING
4.	151-4809	[4]	BUSHING
5.	201-8476	[7]	PLATE-SEPARATOR
6.	201-8477	[7]	DISC-FRICTION
7.	217-3681	[4]	WASHER-THRUST
8.	275-9428	[1]	RING-THRUST
9.	275-9430	[1]	PLATE
10.	275-9433	[1]	CASE AS-DIFFERENTIAL
	2S-5658	[8]	WASHER-HARD (17X29X3-MM THK)
	6V-8154 M	[8]	BOLT (M16X2X150-MM)
11.	279-9693	[1]	PISTON
12.	287-6895	[1]	GEAR-DIFFERENTIAL BEVEL (16-TEETH)
13.	305-3353	[2]	WASHER-THRUST
14.	307-6135	[4]	PIN-GROOVED
15.	308-0888	[1]	BEARING AS
16.	361-6585	[1]	GEAR-DIFFERENTIAL BEVEL (16-TEETH)
17.	156-5198	[1]	SEAL-O-RING
18.	5P-8428	[1]	SEAL-O-RING
			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	M		METRIC PART

352-2183: DRIVE GP-PUMP

DRIVE GP-PUMP

352-2183 DRIVE GP-PUMP
S/N B3E1-UP
PART OF 354-1781 DRIVE GP-PUMP

Parts for your 2670C WHEEL FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	378-2031	[2]	GEAR
2.	378-2032	[1]	GEAR
3.	378-2034	[1]	SHAFT
4.	378-2035	[1]	SHAFT
5.	378-2036	[1]	SHAFT
6.	378-2037	[1]	SLEEVE
7.	378-2038	[2]	SPACER
8.	378-2039	[1]	GAUGE-OIL LEVEL (HYDRAULIC)
9.	378-2040	[1]	SLEEVE
10.	2B-9338	[4]	BALL BEARING
11.	378-2041	[2]	BALL BEARING
12.	378-2042	[1]	SEAL-OIL
13.	378-2043	[1]	SEAL-O-RING
15.	095-0929	[1]	RING-RETAINING
16.	096-5516	[2]	RING-RETAINING (EXTERNAL)
17.	214-3886	[3]	RING-RETAINING
18.	378-2045	[2]	KEY
19.	378-2046	[4]	KEY
20.	378-2047	[2]	PIN
21.	378-2048	[1]	BREATHER (ATMOSPHERIC)
22.	378-2049	[7]	RING-SEALING
23.	378-2051	[1]	PLATE GP-FLEXIBLE
24.	505-9189	[1]	CAP

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
2570C and 2670C Wheel Feller Bunchers

Backup Alarm
2570C and 2670C Wheel Feller Bunchers

ARD Spark Plug - Replace
2570C and 2670C Wheel Feller Bunchers

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation of 189-3158 Arc Suppressor to Protect Fan Control Relay for Certain Wheel Feller Buncher{1408, 4493, 4493}
Installation of 189-3158 Arc Suppressor to Protect Fan Control Relay for Certain Wheel Feller Buncher{1408, 4493, 4493}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Bypass the Fan Reverser Controller on Certain Site Prep Tractors and Wheel Feller Bunchers {1356, 138R, 1403, 1408}
Procedure to Bypass the Fan Reverser Controller on Certain Site Prep Tractors and Wheel Feller Bunchers {1356, 138R, 1403, 1408}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING 394-1223 IQAN SOFTWARE ON CERTAIN 563C, 573C, 2570C, AND 2670C WHEEL FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING 394-1223 IQAN SOFTWARE ON CERTAIN 563C, 573C, 2570C, AND 2670C WHEEL FELLER BUNCHERS

PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FAN CONTROLLER, AND JUMPER HARNESS ON CERTAIN 563C/573C - 2570C/2670C WHEEL FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FAN CONTROLLER, AND JUMPER HARNESS ON CERTAIN 563C/573C - 2570C/2670C WHEEL FELLER BUNCHERS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A HYDRAULIC FILL PUMP TOGGLE SWITCH ASSEMBLY ON CERTAIN 563C/573C - 2570C/2670C WHEEL FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A HYDRAULIC FILL PUMP TOGGLE SWITCH ASSEMBLY ON CERTAIN 563C/573C - 2570C/2670C WHEEL FELLER BUNCHERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB HARNESS ON CERTAIN 553C/563C/573C - 2470C/2570C/2670C WHEEL FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB HARNESS ON CERTAIN 553C/563C/573C - 2470C/2570C/2670C WHEEL FELLER BUNCHERS

PRODUCT SUPPORT PROGRAM FOR REWORKING UHT FAN CONTROLLER CONNECTION ON CERTAIN 553C/563C/573C-2470C/2570C/2670C WHEEL FELLER BUNCHERS AND 586C/2864C SITE PREP TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING UHT FAN CONTROLLER CONNECTION ON CERTAIN 553C/563C/573C-2470C/2570C/2670C WHEEL FELLER BUNCHERS AND 586C/2864C SITE PREP TRACTORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Specifications

Electronic Control Wiring Group - Aftertreatment Regeneration Device
C7.1 Engines for Caterpillar Built Machines

Temperature Sensor (Hydraulic Oil)
2470C, 2570C and 2670C Wheel Feller Bunchers Machine Systems

Pressure Switch (Parking Brake)
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train

Pressure Switch (Brake Accumulator)
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train

Tool Operating Manual

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REWORKING UHT FAN CONTROLLER CONNECTION ON CERTAIN 553C/563C/573C-2470C/2570C/2670C WHEEL FELLER BUNCHERS AND 586C/2864C SITE PREP TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING UHT FAN CONTROLLER CONNECTION ON CERTAIN 553C/563C/573C-2470C/2570C/2670C WHEEL FELLER BUNCHERS AND 586C/2864C SITE PREP TRACTORS

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Change Light
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Set Date and Time
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Monitoring System
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train

System Description
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

System Configuration
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

IQAN-MD3
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Operational Position-MD3
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Menu System-MD3
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Select Mode
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Show Application Information
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Show Module Information
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Show Logs
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Description of Measure Screens
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Flashing New Software or Upgrading the IQAN Machine System
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Change Language
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Tree Counter Display
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Terrain Selection
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Change Screen Saver
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REWORKING UHT FAN CONTROLLER CONNECTION ON CERTAIN 553C/563C/573C-2470C/2570C/2670C WHEEL FELLER BUNCHERS AND 586C/2864C SITE PREP TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING UHT FAN CONTROLLER CONNECTION ON CERTAIN 553C/563C/573C-2470C/2570C/2670C WHEEL FELLER BUNCHERS AND 586C/2864C SITE PREP TRACTORS

Testing and Adjusting

Electric Starting System - Test
C7.1 Engines for Caterpillar Built Machines

Troubleshooting

Connector Locations
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

IQAN Error Messages and Warnings
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Diagnostic Capabilities
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring & Control System

Electrical Connectors
C7.1 Engines and Generator Sets

ARD Ignition - Test
C7.1 Engines and Generator Sets

Idle Validation - Test
C7.1 Engines and Generator Sets

Relay - Test - Fuel Transfer Pump Relay
C7.1 Engines and Generator Sets

Electrical Connectors - Inspect
C7.1 Engines and Generator Sets

Disassembly and Assembly

Soot Antenna - Remove and Install
2570C and 2670C Wheel Feller Bunchers Engine Supplement

Temperature Sensor (DPF) - Remove and Install - Temperature Sensor (DPF) and Flame Detection Sensor
2570C and 2670C Wheel Feller Bunchers Engine Supplement

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

IQAN Active Studio and IQAN Develop Service Software Now Available Through Parker {1408, 7490, 7610, 7620}
2014/11/20

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

A New Fan Controller Is Now Used on Certain Wheel Feller Bunchers {1403, 1408, 4493, 4493}
2012/10/02

New Switch Is Now Used for Hydraulic Fill Pump on Wheel Feller Bunchers {1408, 1435}
2013/02/28

New Switch Is Now Used for Hydraulic Fill Pump on Wheel Feller Bunchers {1408, 1435}
2013/06/19

Improved Keypad Module Gp Is Now Used on Certain Wheel Feller Bunchers, and Wheel Loaders {7490}
2013/09/06

A New Fan Controller is Being Used on Certain Wheel Feller Bunchers {1356, 1403, 1408}
2013/11/04

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

New Sensor Kit Is Now Used On Certain Cat<SUP>®</SUP> Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422}
2015/03/06

New Machine Software Is Used with the IQAN MD3 Monitor on Certain C-Series Site Prep Tractors and Wheel Feller Bunchers {1408, 7301, 7620}
2015/06/26

A New Pinout Configuration Has Been Approved For Use on The Water In Fuel Sensor (WIF) Harness Connector on Certain Wheel Feller Bunchers {1408, 7490, 7610, 7620}
2015/08/05

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

New Harness Assembly and Cable Assembly Is Now Used on Certain Wheel Feller Bunchers {1408, 7301}
New Harness Assembly and Cable Assembly Is Now Used on Certain Wheel Feller Bunchers {1408, 7301}

Procedure to Bypass the Fan Reverser Controller Is Now Used on Certain Site Prep Tractors and Wheel Feller Bunchers {1356, 138R, 1403, 1408}
Procedure to Bypass the Fan Reverser Controller Is Now Used on Certain Site Prep Tractors and Wheel Feller Bunchers {1356, 138R, 1403, 1408}

Cold Climate Kit Is Now Available for Certain Forest Machines Equipped with C7.1, and C6.6 Engines, Knuckleboom Loaders, Wheel Feller Bunchers, and Wheel Skidders {1317, 1408}
Cold Climate Kit Is Now Available for Certain Forest Machines Equipped with C7.1, and C6.6 Engines, Knuckleboom Loaders, Wheel Feller Bunchers, and Wheel Skidders {1317, 1408}

Caterpillar Parts SIS Catalog 2670C :

Truck sale:

$192,000 USD

CATERPILLAR 2670C 2016
- FORESTRY - FELLER BUNCHERS - WHEEL
ZEPPELIN POWER SYSTEMS
>