511-8734 ENGINE AR-COMPLETE S/N TXD13500-UP PART OF 374-4354 ENGINE AR-COMPLETE 522B TRACK FELLER BUNCHER

Part No	Qty	Parts name
474-2107 Y	[1]	ACCESSORY & FAN DRIVE GP
217-6635 Y	[1]	ALTERNATOR GP-CHARGING
226-3561 Y	[1]	COMPRESSOR GP-REFRIGERANT
246-9365 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
188-3826 Y	[1]	COOLER GP-ENGINE OIL
202-3301 Y	[1]	COVER GP-CYLINDER BLOCK (CRANKCASE BREATHER)
133-3089 Y	[1]	COVER GP-FLYWHEEL HOUSING
118-1727 Y	[1]	COVER GP-FRONT HOUSING (ACCESSORY DRIVE)
211-3285 Y	[1]	COVER GP-FRONT HOUSING
280-8003 Y	[1]	COVER GP-VALVE MECHANISM
165-4557 Y	[1]	DAMPER & PULLEY GP
173-6107 Y	[1]	ELBOW GP-AIR INLET
417-6282 Y	[1]	ENGINE AR
218-0859 Y	[1]	FASTENER GP-DAMPER & PULLEY
117-2794 Y	[1]	FASTENER GP-FLYWHEEL
236-7315 Y	[1]	FASTENER GP-VALVE COVER
233-0423 Y	[1]	FASTENER GP-VALVE COVER BASE
220-1998 Y	[1]	FILTER GP-ENGINE OIL
116-5386 Y	[1]	FLYWHEEL GP
226-3559 Y	[1]	FUMES DISPOSAL GP
219-9960 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
248-8835 Y	[1]	HOUSING & REGULATOR GP
187-0473 Y	[1]	HOUSING GP-FLYWHEEL
245-3260 Y	[1]	HOUSING GP-FRONT
191-3063 Y	[1]	LIFTING GP-ENGINE
202-6603 Y	[1]	LINES GP-ENGINE OIL
165-4465 Y	[1]	LINES GP-TURBOCHARGER OIL
244-0989 Y	[1]	LINES GP-TURBOCHARGER WATER
202-0996 Y	[1]	MANIFOLD GP-EXHAUST
219-9943 Y	[1]	PAN GP-OIL
524-1336 Y	[1]	PLUG GP-CONNECTOR
235-8200 Y	[1]	PLUG GP-CONNECTOR (ENGINE HARNESS, PROT COVER)
422-2828 Y	[1]	PLUG GP-ENGINE
205-4013 Y	[1]	PLUG GP-WATER LINES
273-2445 Y	[1]	REGULATOR GP-FUEL PRESSURE
178-3899 Y	[1]	SEAL GP-CRANKSHAFT
238-3215 Y	[1]	STARTING AID GP
172-0961 Y	[1]	SUPPORT GP-ENGINE
258-8337 Y	[1]	TURBOCHARGER GP
397-9363 Y	[1]	WIRING GP-ELECTRONIC CONTROL

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP51230011

511-8735: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

511-8735 ENGINE AR-COMPLETE
S/N TXD1-UP; THX1-UP
PART OF 374-4357 CONVERSION AR-ENGINE
AN ATTACHMENT

i07305537 SEBP5123

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Part No	Qty	Parts name
474-2107 Y	[1]	ACCESSORY & FAN DRIVE GP
217-6635 Y	[1]	ALTERNATOR GP-CHARGING
226-3561 Y	[1]	COMPRESSOR GP-REFRIGERANT
246-9365 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
188-3826 Y	[1]	COOLER GP-ENGINE OIL
202-3301 Y	[1]	COVER GP-CYLINDER BLOCK (CRANKCASE BREATHER)
133-3089 Y	[1]	COVER GP-FLYWHEEL HOUSING
118-1727 Y	[1]	COVER GP-FRONT HOUSING (ACCESSORY DRIVE)
211-3285 Y	[1]	COVER GP-FRONT HOUSING
280-8003 Y	[1]	COVER GP-VALVE MECHANISM
165-4557 Y	[1]	DAMPER & PULLEY GP
173-6107 Y	[1]	ELBOW GP-AIR INLET
417-6282 Y	[1]	ENGINE AR
218-0859 Y	[1]	FASTENER GP-DAMPER & PULLEY
117-2794 Y	[1]	FASTENER GP-FLYWHEEL
236-7315 Y	[1]	FASTENER GP-VALVE COVER
233-0423 Y	[1]	FASTENER GP-VALVE COVER BASE
220-1998 Y	[1]	FILTER GP-ENGINE OIL
116-5386 Y	[1]	FLYWHEEL GP
226-3559 Y	[1]	FUMES DISPOSAL GP
219-9960 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
248-8835 Y	[1]	HOUSING & REGULATOR GP
187-0473 Y	[1]	HOUSING GP-FLYWHEEL
245-3260 Y	[1]	HOUSING GP-FRONT
191-3063 Y	[1]	LIFTING GP-ENGINE
202-6603 Y	[1]	LINES GP-ENGINE OIL
165-4465 Y	[1]	LINES GP-TURBOCHARGER OIL
244-0989 Y	[1]	LINES GP-TURBOCHARGER WATER
202-0996 Y	[1]	MANIFOLD GP-EXHAUST
219-9943 Y	[1]	PAN GP-OIL
235-8200 Y	[1]	PLUG GP-CONNECTOR (ENGINE HARNESS, PROT COVER)
422-2828 Y	[1]	PLUG GP-ENGINE
205-4013 Y	[1]	PLUG GP-WATER LINES
273-2445 Y	[1]	REGULATOR GP-FUEL PRESSURE
178-3899 Y	[1]	SEAL GP-CRANKSHAFT
238-3215 Y	[1]	STARTING AID GP
172-0961 Y	[1]	SUPPORT GP-ENGINE
258-8337 Y	[1]	TURBOCHARGER GP
397-9363 Y	[1]	WIRING GP-ELECTRONIC CONTROL

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP51230012

350-9162: ENGINE AR-CORE

ENGINE AR-CORE

350-9162 ENGINE AR-CORE
S/N THX1-38526
PART OF 367-4852 ENGINE AR-COMPLETE
AN ATTACHMENT

i03791989 SEBP5123

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Part No	Qty	Parts name
242-0674 Y	[1]	CAMSHAFT GP
188-3826 Y	[1]	COOLER GP-ENGINE OIL
217-8669 Y	[1]	COVER GP-FRONT HOUSING
164-6148 Y	[1]	CRANKSHAFT GP
220-1951 Y	[1]	CYLINDER BLOCK GP
345-8414 Y	[1]	CYLINDER HEAD GP
213-4363 Y	[1]	FASTENER GP-CYLINDER HEAD
205-1321 Y	[1]	GEAR GP-FRONT
209-0758 Y	[1]	HOUSING GP-FRONT
265-1400 Y	[6]	PISTON & ROD GP
220-8233 Y	[1]	PUMP & MTG GP-UNIT INJ HYD
195-8098 Y	[1]	PUMP GP-ENGINE OIL
267-3362 Y	[1]	PUMP GP-FUEL INJECTION
258-8337 Y	[1]	TURBOCHARGER GP
242-0447 Y	[1]	VALVE MECHANISM GP
350-5894	[1]	ELECTRONICS GP-ENGINE RATINGS
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP51230013

384-8426: ENGINE AR-CORE

ENGINE AR-CORE

384-8426 ENGINE AR-CORE
S/N TXD1-UP; THX1-UP
PART OF 384-8429 ENGINE AR
AN ATTACHMENT

i04557401 SEBP5123

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Part No	Qty	Parts name
242-0674 Y	[1]	CAMSHAFT GP
188-3826 Y	[1]	COOLER GP-ENGINE OIL
164-6148 Y	[1]	CRANKSHAFT GP
220-1951 Y	[1]	CYLINDER BLOCK GP
384-5590 Y	[1]	CYLINDER HEAD GP
205-1321 Y	[1]	GEAR GP-FRONT
265-1400 Y	[6]	PISTON & ROD GP
220-8233 Y	[1]	PUMP & MTG GP-UNIT INJ HYD
195-8098 Y	[1]	PUMP GP-ENGINE OIL
267-3361 Y	[6]	PUMP GP-FUEL INJECTION
202-7674 Y	[1]	PUMP GP-WATER
330-6034 Y	[1]	SENSOR GP-ENGINE
242-0447 Y	[1]	VALVE MECHANISM GP
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP51230014

417-6290: ENGINE AR-CORE

ENGINE AR-CORE

417-6290 ENGINE AR-CORE
S/N TXD1-UP; THX1-UP
PART OF 417-6282 ENGINE AR
ALSO AN ATTACHMENT

i05194206 SEBP5123

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Part No	Qty	Parts name
242-0674 Y	[1]	CAMSHAFT GP
164-6148 Y	[1]	CRANKSHAFT GP
161-3406 Y	[1]	CYLINDER BLOCK GP
384-5590 Y	[1]	CYLINDER HEAD GP
205-1321 Y	[1]	GEAR GP-FRONT
265-1400 Y	[6]	PISTON & ROD GP
389-1186 Y	[1]	PUMP GP-UNIT INJECTOR HYD
195-8098 Y	[1]	PUMP GP-ENGINE OIL
267-3361 Y	[6]	PUMP GP-FUEL INJECTION
202-7674 Y	[1]	PUMP GP-WATER
397-8636 Y	[1]	SENSOR GP-ENGINE
242-0447 Y	[1]	VALVE MECHANISM GP

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP51230015

367-2135: INSTALLATION AR-ENGINE

INSTALLATION AR-ENGINE

367-2135 INSTALLATION AR-ENGINE
S/N F7C1-UP
PART OF 351-6849 COMMON AR

i07607312 SEBP5123

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Part No	Qty	Parts name
367-2129 Y	[1]	AIR CLEANER GP
154-6643 Y	[1]	COUPLING & MTG GP-PUMP
216-9855 Y	[1]	MOUNTING GP-ENGINE
372-3160 Y	[1]	MUFFLER GP
Y		SEPARATE ILLUSTRATION

#SEBP51230016

363-0271: ACCESSORY & FAN DRIVE GP

ACCESSORY & FAN DRIVE GP

363-0271 ACCESSORY & FAN DRIVE GP
S/N TXD1-9479; THX38527-UP
PART OF 367-4852, 417-0656, 417-0657 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i04380476 SEBP5123

3630271 ACCESSORY & FAN DRIVE GP Parts scheme

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-7238	[1]	PLATE (THRUST)
2.	189-2449	[1]	SUPPORT
3.	190-0643	[1]	BELT TENSIONER GP
4.	190-3968	[1]	SHAFT-FAN
5.	190-4155	[1]	BELT-SERPENTINE
6.	226-7914	[1]	BRACKET (FAN BEARING)
7.	228-5827	[1]	RETAINER-BEARING
8.	243-2310	[1]	COVER
9.	307-9798	[1]	BEARING AS
10.	333-1207	[1]	IDLER AS
11.	363-0255	[1]	PULLEY-FAN
12.	363-0267	[1]	SUPPORT AS
13.	5C-7423 M	[4]	SCREW (M6X1X16-MM)
14.	6V-3940 M	[7]	BOLT (M8X1.25X25-MM)
15.	6V-5218 M	[2]	BOLT (M8X1.25X35-MM)
16.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
17.	6V-5839	[7]	WASHER (11X21X2.5-MM THK)
18.	6V-5842 M	[6]	BOLT (M10X1.5X40-MM)
19.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
20.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP51230017

474-2107: ACCESSORY & FAN DRIVE GP

ACCESSORY & FAN DRIVE GP

474-2107 ACCESSORY & FAN DRIVE GP
S/N TXD1-UP
PART OF 417-0656, 417-0657 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i06148711 SEBP5123

4742107 ACCESSORY & FAN DRIVE GP Parts scheme

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-7238	[1]	PLATE (THRUST)
2.	189-2449	[1]	SUPPORT
3.	190-3968	[1]	SHAFT-FAN
4.	190-4155	[1]	BELT-SERPENTINE
5.	222-2880	[1]	BELT TENSIONER
6.	226-7914	[1]	BRACKET (FAN BEARING)
7.	228-5827	[1]	RETAINER-BEARING
8.	243-2310	[1]	COVER
9.	307-9798	[1]	BEARING AS
10.	333-1207	[1]	IDLER AS
11.	363-0255	[1]	PULLEY-FAN
12.	472-2634	[1]	SUPPORT AS
	5V-9221	[1]	SPACER (13.8X25X25-MM THK)
13.	5C-7423 M	[4]	SCREW (M6X1X16-MM)
14.	6V-3940 M	[7]	BOLT (M8X1.25X25-MM)
15.	6V-5218 M	[2]	BOLT (M8X1.25X35-MM)
16.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
17.	6V-5839	[7]	WASHER (11X21X2.5-MM THK)
18.	6V-5842 M	[6]	BOLT (M10X1.5X40-MM)
19.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
20.	9M-1974	[9]	WASHER-HARD (8.8X16X2-MM THK)
21.	255-8679	[2]	WASHER-VALVE SPRING
	M		METRIC PART

#SEBP51230018

474-2107: ACCESSORY & FAN DRIVE GP

ACCESSORY & FAN DRIVE GP

474-2107 ACCESSORY & FAN DRIVE GP
S/N TXD1-UP; THX1-UP
PART OF 417-0656, 417-0657, 511-8734, 511-8735 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i06300215 SEBP5123

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-7238	[1]	PLATE (THRUST)
2.	189-2449	[1]	SUPPORT
3.	190-3968	[1]	SHAFT-FAN
4.	485-7138 C	[1]	BELT-SERPENTINE
5.	222-2880	[1]	BELT TENSIONER
6.	536-3602	[1]	BRACKET
7.	228-5827	[1]	RETAINER-BEARING
8.	243-2310	[1]	COVER
9.	307-9798	[1]	BEARING AS
10.	333-1207	[1]	IDLER AS
11.	363-0255	[1]	PULLEY-FAN
12.	486-3152 C	[1]	SUPPORT AS
	5V-9221	[1]	SPACER (13.8X25X25-MM THK)
13.	5C-7423 M	[4]	SCREW (M6X1X16-MM)
14.	6V-3940 M	[7]	BOLT (M8X1.25X25-MM)
15.	6V-5218 M	[2]	BOLT (M8X1.25X35-MM)
16.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
17.	6V-5839	[7]	WASHER (11X21X2.5-MM THK)
18.	6V-5842 M	[6]	BOLT (M10X1.5X40-MM)
19.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
20.	9M-1974	[9]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP51230019

224-7846: BELT TENSIONER GP

BELT TENSIONER GP

224-7846 BELT TENSIONER GP
S/N THX1-38527
PART OF 367-4852 ENGINE AR-COMPLETE
AN ATTACHMENT

i01848643 SEBP5123

For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	190-0643	[1]	BELT TENSIONER GP
2.	189-2449	[1]	SUPPORT
3.	268-8897	[1]	SUPPORT AS
	5V-9221	[1]	SPACER (13.8X25X25-MM THK)
4.	6V-5218 M	[2]	BOLT (M8X1.25X35-MM)
5.	6V-5839	[7]	WASHER (11X21X2.5-MM THK)
6.	6V-5842 M	[6]	BOLT (M10X1.5X40-MM)
7.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
8.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)

	2W-9533 FM	[4]	BOLT (M8X1.25X10-MM)
	9M-1974 F	[4]	WASHER-HARD (8.8X16X2-MM THK)
	F		NOT SHOWN
	M		METRIC PART

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS CERTAIN 140M, AND 160M MOTOR GRADERS, 330D, 336D, 336D2, 340D, AND 340D2 EXCAVATORS, 511, 521, 521B 522, 522B, 532, 541, 541B, 552, AND 552B TRACK FELLER BUNCHERS, 627G, AND 637G WHEEL TRACTOR SCRAPERS, 814F WHEEL DOZERS, 815F SOIL COMPACTORS, 816F LANDFILL COMPACTORS, 973C, AND 973D TRACK-TYPE LOADERS, D6R, D6T, AND D7R TRACK-TYPE TRACTORS, MH3049 AND MH3059 MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS CERTAIN 140M, AND 160M MOTOR GRADERS, 330D, 336D, 336D2, 340D, AND 340D2 EXCAVATORS, 511, 521, 521B 522, 522B, 532, 541, 541B, 552, AND 552B TRACK FELLER BUNCHERS, 627G, AND 637G WHEEL TRACTOR SCRAPERS, 814F WHEEL DOZERS, 815F SOIL COMPACTORS, 816F LANDFILL COMPACTORS, 973C, AND 973D TRACK-TYPE LOADERS, D6R, D6T, AND D7R TRACK-TYPE TRACTORS, MH3049 AND MH3059 MATERIAL HANDLERS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
C9 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
C7 Engines for Caterpillar Built Machines

General Information
C9 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

CAT REMAN ANNOUNCES ADDITIONAL C9 ENGINE OPTIONS FOR CAT� MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL C9 ENGINE OPTIONS FOR CAT� MACHINE APPLICATIONS

ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES
ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES

CAT REMAN ANNOUNCES ADDITIONAL 3176, C9, C11, C13 AND C15 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL 3176, C9, C11, C13 AND C15 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)

CAT REMAN ANNOUNCES ADDITIONAL C7, C9, C15 AND 3116 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL C7, C9, C15 AND 3116 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS

CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)

CAT REMAN ANNOUNCES C9 HIGH EFFICIENCY PUMP ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS
CAT REMAN ANNOUNCES C9 HIGH EFFICIENCY PUMP ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS

Service Letter-APD

Troubleshooting

Low Engine Oil Pressure
C7 and C9 Engines for Caterpillar Built Machines

Engine Stalls at Low RPM
C7 and C9 Engines for Caterpillar Built Machines

Excessive Black Smoke
C7 and C9 Engines for Caterpillar Built Machines

Engine Misfires, Runs Rough or Is Unstable
C7 and C9 Engines for Caterpillar Built Machines

Engine Vibration
C7 and C9 Engines for Caterpillar Built Machines

Excessive Fuel Consumption
C7 and C9 Engines for Caterpillar Built Machines

Engine Cranks but Will Not Start
C7 and C9 Engines for Caterpillar Built Machines

Excessive White Smoke
C7 and C9 Engines for Caterpillar Built Machines

E362 Engine Overspeed
C7 and C9 Engines for Caterpillar Built Machines

Engine Will Not Crank
C7 and C9 Engines for Caterpillar Built Machines

Low Power/Poor or No Response to Throttle
C7 and C9 Engines for Caterpillar Built Machines

Poor Acceleration or Response
C7 and C9 Engines for Caterpillar Built Machines

Disassembly and Assembly

Engine - Remove and Install
521B and 522B Track Feller Bunchers Engine Supplement

Service Magazine

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 522B :

417-0657 ENGINE AR-COMPLETE

417-0656 ENGINE AR-COMPLETE

374-4354 ENGINE AR-COMPLETE

367-4852 ENGINE AR-COMPLETE

417-6282 ENGINE AR

384-8429 ENGINE AR

374-4357 CONVERSION AR-ENGINE

351-6849 COMMON AR

511-8735 ENGINE AR-COMPLETE

350-9162 ENGINE AR-CORE

384-8426 ENGINE AR-CORE

417-6290 ENGINE AR-CORE

367-2135 INSTALLATION AR-ENGINE

363-0271 ACCESSORY & FAN DRIVE GP

474-2107 ACCESSORY & FAN DRIVE GP

Truck sale:

Caterpillar 522B
- Feller bunchers
PETERSON TRACTOR CO

315.000

Caterpillar 522B, Mulcher, Landmaschinen
- Pasture mowers and toppers
WESTERN STATES EQUIPMENT

409.500

Caterpillar 522B, Forstanhänger/Rückewagen, Forstmaschinen
- Feller bunchers
PETERSON TRACTOR CO

315.000

Caterpillar 522B, Mulcher, Landmaschinen