AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

222-9149 CYLINDER GP-TILT -SIDE, FOR CAB LEVELING S/N F7C1-UP 177.8-MM (7-IN) BORE X 231.9-MM (9.1-IN) STROKE PART OF 224-9037 CYLINDER & LINES GP-TILT 522B


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

TRACK FELLER BUNCHER 522B TRACK FELLER BUNCHER F7C
 522B TRACK FELLER BUNCHER F7C00001-UP (MACHINE) POWERED BY C9 Engine SEBP5123 522B F7C   (2011)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-HYDRAULIC
457-4659 CYLINDER GP-HYDRAULIC
CYLINDER GP-STICK
215-9092 CYLINDER GP-STICK
CYLINDER GP-TILT
222-9149 CYLINDER GP-TILT
CYLINDER GP-TILT
274-7480 CYLINDER GP-TILT
CYLINDER GP-TILT
282-9611 CYLINDER GP-TILT
297-4841 KIT-SEAL
 

#SEBP51230340
 

222-9149: CYLINDER GP-TILT

222-9149 CYLINDER GP-TILT -SIDE, FOR CAB LEVELING
S/N F7C1-UP
177.8-MM (7-IN) BORE X 231.9-MM (9.1-IN) STROKE
PART OF 224-9037 CYLINDER & LINES GP-TILT
i01860967 SEBP5123
2229149 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 5J-4997 J [1] SEAL AS  
  5J-4995 [1] RING-EXPANDER  
3. 8C-9101 J [1] RING-WEAR  
4. 8M-4228 J [1] RING-WEAR  
5. 096-4443 [2] SEAL-LIP TYPE  
6. 096-9512 [1] BUSHING  
7. 167-2209 J [1] SEAL AS-BUFFER  
8. 225-3285 J [1] SEAL-WIPER  
9. 229-0328 [1] TUBE AS  
10. 229-0330 [1] ROD AS  
11. 229-0332 [1] HEAD  
12. 229-0333 [1] PISTON  
13. 229-0335 [2] BEARING  
14. 230-4560 J [1] SEAL-O-RING  
15. 230-4562 J [1] RING-BACKUP  
16. 167-2320 J [1] SEAL-U-CUP  
17. 6V-6707 J [1] SEAL-O-RING  
18. 3H-8430 [2] SETSCREW (3/8-16X0.75-IN)  
19. 4D-6419 [8] WASHER-HARD (24X40X5-MM THK)  
20. 8D-3886 [1] RING-RETAINING  
21. 8L-4638 [8] BOLT (7/8-9X2.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  229-0334 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP51230341
 

274-7480: CYLINDER GP-TILT

274-7480 CYLINDER GP-TILT -SAW
S/N F7C1-UP
130-MM (5.1-IN) BORE X 1076.5-MM (42.4-IN) STROKE
PART OF 381-8651 CYLINDER & MTG GP-SAW
AN ATTACHMENT
i02438933 SEBP5123
2747480 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-1351 [1] STOP  
2. 7I-1353 [1] HEAD  
3. 495-8200 J [1] RING AS-SEAL (DIA 130-BORE)  
4. 093-1571 [1] RING-RETAINING  
5. 096-1588 J [1] RING-BACKUP  
6. 103-8378 [1] RING-RETAINING  
7. 103-8379 [1] RING  
8. 103-8380 [1] STOP  
9. 147-5852 J [1] RING  
10. 147-5853 J [1] RING  
11. 167-2212 J [1] SEAL AS-BUFFER  
12. 274-7481 [1] ROD AS  
12A. 7Y-5128 [1] BUSHING  
13. 274-7483 [1] PISTON  
14. 277-3225 [1] CYLINDER AS  
14A. 7Y-5128 [1] BUSHING  
15. 095-0929 [2] RING-RETAINING  
16. 095-1631 J [1] SEAL-O-RING  
17. 114-0758 J [1] BUSHING  
18. 150-5884 J [1] RING  
19. 165-9287 J [1] SEAL-LIP TYPE  
20. 167-2325 J [1] SEAL-U-CUP  
21. 7Y-4622 [1] LOCKNUT (SPECIAL)  
22. 7I-1352 J [1] RING-SEAL  
23. 7Y-4633 J [1] RING-BACKUP  
24. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  344-6336 J [1] KIT-HYD CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP51230342
 

282-9611: CYLINDER GP-TILT

282-9611 CYLINDER GP-TILT -REAR, FOR CAB LEVELING
S/N F7C1-UP
PART OF 224-9037 CYLINDER & LINES GP-TILT
i02423188 SEBP5123
2829611 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 5J-4997 J [1] SEAL AS  
  5J-4995 [1] RING-EXPANDER  
3. 8C-9101 J [1] RING-WEAR  
4. 8M-4228 J [1] RING-WEAR  
5. 155-3537 [2] BEARING  
6. 167-2209 J [1] SEAL AS-BUFFER  
7. 225-3285 J [1] SEAL-WIPER  
8. 229-0329 [1] TUBE AS  
9. 229-0332 [1] HEAD  
10. 229-0333 [1] PISTON  
11. 230-4560 J [1] SEAL-O-RING  
12. 230-4562 J [1] RING-BACKUP  
13. 282-9612 [1] ROD AS  
14. 067-3161 [4] RING-RETAINING  
15. 167-2320 J [1] SEAL-U-CUP  
16. 3H-8430 [2] SETSCREW (3/8-16X0.75-IN)  
17. 4D-6419 [8] WASHER-HARD (24X40X5-MM THK)  
18. 6V-6707 J [1] SEAL-O-RING  
19. 8D-3886 [1] RING-RETAINING  
20. 8L-4638 [8] BOLT (7/8-9X2.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  229-0334 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP51230343
 

339-8310: DRIVE AR-SWING

339-8310 DRIVE AR-SWING
S/N F7C1-255
PART OF 362-3896 HYDRAULIC AR
i04465398 SEBP5123
3398310 DRIVE AR-SWING Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [2] CORK  
2. 5D-1026 [2] CLAMP-BAND  
3. 7Y-0336 [16] SPACER (24.5X44X24-MM THK)  
4. 096-4755 [1] PIN  
5. 165-2273 [1] VALVE AS-SHUTOFF  
  6V-7238 [1] VALVE-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
6. 168-9860 [1] PLUG  
7. 220-8623 Y [1] DRIVE GP-SWING  
8. 322-8716 Y [1] VALVE GP-SWING CUSHION (FINE SWING)  
9. 364-0484 I [1] HOSE AS  
10. 364-0485 I [1] HOSE AS  
11. 173-9684 M [16] BOLT (M24X3X100-MM)  
12. 149-7738 [1] CLIP (LOOP)  
13. 1P-3702 [4] SEAL-RECTANGULAR  
14. 6D-4244 [1] CLIP (LOOP)  
15. 6V-1889 [1] CLIP (LOOP)  
16. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-4178 M [6] BOLT (M10X1.5X90-MM)  
19. 8T-4182 M [16] BOLT (M10X1.5X45-MM)  
20. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
21. 8T-9403 [8] FLANGE-HALF  
22. 5P-0767 E HOSE (95-CM)  
   
  8C-8422 F SEALANT  
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51230344
 

339-8310: DRIVE AR-SWING

339-8310 DRIVE AR-SWING
S/N F7C256-280
PART OF 362-3896 HYDRAULIC AR
i05776776 SEBP5123
3398310 DRIVE AR-SWING Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [2] CORK  
2. 5D-1026 [2] CLAMP-BAND  
3. 7Y-0336 [16] SPACER (24.5X44X24-MM THK)  
4. 096-4755 [1] PIN  
5. 165-2273 [1] VALVE AS-SHUTOFF  
  6V-7238 [1] VALVE-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
6. 168-9860 [1] PLUG  
7. 220-8623 Y [1] DRIVE GP-SWING  
8. 322-8716 Y [1] VALVE GP-SWING CUSHION (FINE SWING)  
9. 364-0484 I [1] HOSE AS  
10. 364-0485 I [1] HOSE AS  
11. 173-9684 M [16] BOLT (M24X3X100-MM)  
12. 092-7385 C [1] CLIP  
13. 1P-3702 [4] SEAL-RECTANGULAR  
14. 6D-4244 [1] CLIP (LOOP)  
16. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-4178 M [6] BOLT (M10X1.5X90-MM)  
19. 8T-4182 M [16] BOLT (M10X1.5X45-MM)  
20. 8T-4137 CM [1] BOLT (M10X1.5X20-MM)  
21. 8T-9403 [8] FLANGE-HALF  
22. 5P-0767 E HOSE (95-CM)  
   
  1U-8846 F SEALANT-GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51230345
 

339-8310: DRIVE AR-SWING

339-8310 DRIVE AR-SWING
S/N F7C281-333
PART OF 362-3896 HYDRAULIC AR
i06097281 SEBP5123
3398310 DRIVE AR-SWING Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [2] CORK  
2. 5D-1026 [2] CLAMP-BAND  
3. 7Y-0336 [16] SPACER (24.5X44X24-MM THK)  
4. 096-4755 [1] PIN  
5. 165-2273 [1] VALVE AS-SHUTOFF  
  6V-7238 [1] VALVE-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
6. 168-9860 [1] PLUG  
7. 220-8623 Y [1] DRIVE GP-SWING  
8. 322-8716 Y [1] VALVE GP-SWING CUSHION (FINE SWING)  
9. 364-0484 I [1] HOSE AS  
10. 364-0485 I [1] HOSE AS  
11. 173-9684 M [16] BOLT (M24X3X100-MM)  
13. 1P-3702 [4] SEAL-RECTANGULAR  
14. 6D-4244 [1] CLIP (LOOP)  
16. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-4178 M [6] BOLT (M10X1.5X90-MM)  
19. 8T-4182 CM [8] BOLT (M10X1.5X45-MM)  
21. 8T-9403 [8] FLANGE-HALF  
22. 5P-0767 E HOSE (95-CM)  
23. 105-3477 CM [8] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
24. 8T-4196 CM [1] BOLT (M10X1.5X35-MM)  
25. 5P-8112 C [2] GROMMET  
26. 5P-7467 C [2] CLIP (TAB)  
27. 5P-7466 C [2] CLIP (SLOT)  
   
  8C-8422 F SEALANT  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51230346
 

339-8310: DRIVE AR-SWING

339-8310 DRIVE AR-SWING
S/N F7C334-364
PART OF 362-3896 HYDRAULIC AR
i06875836 SEBP5123
3398310 DRIVE AR-SWING Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [2] CORK  
2. 5D-1026 [2] CLAMP-BAND  
3. 7Y-0336 [16] SPACER (24.5X44X24-MM THK)  
4. 096-4755 [1] PIN  
5. 165-2273 [1] VALVE AS-SHUTOFF  
  6V-7238 [1] VALVE-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
6. 168-9860 [1] PLUG  
7. 507-2612 Y [1] DRIVE GP-SWING  
8. 322-8716 Y [1] VALVE GP-SWING CUSHION (FINE SWING)  
9. 364-0484 I [1] HOSE AS  
10. 364-0485 I [1] HOSE AS  
11. 173-9684 M [16] BOLT (M24X3X100-MM)  
13. 1P-3702 [4] SEAL-RECTANGULAR  
14. 6D-4244 [1] CLIP (LOOP)  
16. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-4178 M [6] BOLT (M10X1.5X90-MM)  
19. 8T-4182 CM [8] BOLT (M10X1.5X45-MM)  
21. 8T-9403 [8] FLANGE-HALF  
22. 5P-0767 E HOSE (95-CM)  
23. 105-3477 CM [8] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
24. 8T-4196 CM [1] BOLT (M10X1.5X35-MM)  
25. 5P-8112 C [2] GROMMET  
26. 5P-7467 C [2] CLIP (TAB)  
27. 5P-7466 C [2] CLIP (SLOT)  
   
  8C-8422 F SEALANT  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51230347
 

339-8310: DRIVE AR-SWING

339-8310 DRIVE AR-SWING
S/N F7C365-UP
PART OF 362-3896 HYDRAULIC AR
i07227926 SEBP5123
3398310 DRIVE AR-SWING Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [2] CORK  
2. 235-9014 C [2] CLAMP-SPRING  
3. 7Y-0336 [16] SPACER (24.5X44X24-MM THK)  
4. 096-4755 [1] PIN  
5. 165-2273 [1] VALVE AS-SHUTOFF  
  6V-7238 [1] VALVE-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
6. 168-9860 [1] PLUG  
7. 507-2612 Y [1] DRIVE GP-SWING  
8. 322-8716 Y [1] VALVE GP-SWING CUSHION (FINE SWING)  
9. 364-0484 I [1] HOSE AS  
10. 364-0485 I [1] HOSE AS  
11. 173-9684 M [16] BOLT (M24X3X100-MM)  
13. 1P-3702 [4] SEAL-RECTANGULAR  
14. 6D-4244 [1] CLIP (LOOP)  
16. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-4178 M [6] BOLT (M10X1.5X90-MM)  
19. 8T-4182 M [8] BOLT (M10X1.5X45-MM)  
21. 8T-9403 [8] FLANGE-HALF  
22. 5P-0767 E HOSE (95-CM)  
23. 105-3477 M [8] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
24. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
25. 5P-8112 [2] GROMMET  
26. 5P-7467 [2] CLIP (TAB)  
27. 5P-7466 [2] CLIP (SLOT)  
28. 7K-1181 C [1] STRAP-CABLE  
   
  1U-8846 F SEALANT-GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP51230348
 

201-7808: DRIVE GP-SWING

201-7808 DRIVE GP-SWING
S/N F7C1-333
PART OF 220-8623 DRIVE GP-SWING
i01496667 SEBP5123
2017808 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
3. 165-2273 [1] VALVE AS-SHUTOFF (HYDRAULIC OIL)  
  3K-0360 [1] SEAL-O-RING  
  6V-7238 [1] VALVE-SHUTOFF  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 093-1730 [2] RING-RETAINING  
7. 093-1731 [1] RING-RETAINING  
8. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
9. 094-1528 [8] WASHER (53X84X1-MM THK)  
10. 096-2653 [1] RING-RETAINING  
11. 114-1383 [4] SHAFT-PLANETARY  
12. 114-1401 [1] COVER-HOUSING  
13. 169-5617 [1] GEAR-SUN (18-TEETH)  
14. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
15. 171-9280 [1] GEAR-RING (72-TEETH)  
16. 171-9283 [1] GEAR-SUN (24-TEETH)  
17. 171-9375 [1] SEAL-O-RING  
18. 191-2579 [1] CARRIER-PLANETARY  
19. 191-2694 [1] SHAFT-PINION  
20. 191-2695 [1] HOUSING  
21. 191-2696 [1] CAGE  
22. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
23. 7Y-1115 [1] PIPE-GAUGE  
24. 093-2357 [1] GAUGE-OIL LEVEL (DIPSTICK) (HYDRAULIC OIL)  
25. 095-0891 [7] PIN-SPRING  
26. 135-9044 [2] SEAL-LIP TYPE  
27. 136-2904 [1] BEARING  
28. 136-2940 [1] BEARING  
29. 1U-8846 B SEALANT-GASKET  
30. 7Y-0252 [3] BEARING AS-ROLLER  
31. 191-2513 [8] BEARING AS-ROLLER  
32. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
33. 8J-8879 [1] SEAL-O-RING  
34. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
35. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-6385 M [16] BOLT (M16X2X180-MM)  
37. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP51230349
 

220-8623: DRIVE GP-SWING

220-8623 DRIVE GP-SWING
S/N F7C1-333
PART OF 339-8310 DRIVE AR-SWING
i03942249 SEBP5123
2208623 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 522B TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 201-7808 Y [1] DRIVE GP-SWING  
2. 334-9971 CY [1] MOTOR GP-SWING  
3. 6V-5204 [1] RING-RETAINING  
4. 8T-4944 M [4] BOLT-SOCKET HEAD (M16X2X40-MM)  
5. 8T-6404 [1] SEAL-O-RING  
6. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Tilt Cylinder Bearings - Lubricate
521B and 522B Track Feller Bunchers
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Stick Cylinder
521B and 522B Track Feller Bunchers Machine Systems
Stick Cylinder - Harvester
521B and 522B Track Feller Bunchers Machine Systems
Tilt Cylinder (Saw) - Felling Head
521B and 522B Track Feller Bunchers Machine Systems
Boom Cylinder
521B and 522B Track Feller Bunchers Machine Systems
Boom Cylinder - Harvester
521B and 522B Track Feller Bunchers Machine Systems
Tilt Cylinder (Side for Cab Leveling)
521B and 522B Track Feller Bunchers Machine Systems
Tilt Cylinder (Rear for Cab Leveling)
521B and 522B Track Feller Bunchers Machine Systems
Hood Tilt Cylinder
521B and 522B Track Feller Bunchers Machine Systems
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Speed - Check
521B and 522B Track Feller Bunchers Machine Systems
Boom Cylinder Drift - Check
521B and 522B Track Feller Bunchers Machine Systems
Stick Cylinder Drift - Check
521B and 522B Track Feller Bunchers Machine Systems
Tilt Cylinder Drift - Check
521B and 522B Track Feller Bunchers Machine Systems
Relief Valve (Line) - Test and Adjust
521B and 522B Track Feller Bunchers Machine Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tilt Cylinder (Saw) - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems
Stick Cylinder - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems
Stick - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems
Boom Cylinder - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems
Tilt Cylinder (Side for Cab Leveling) - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems
Hood Tilt Cylinder - Remove and Install
521B and 522B Track Feller Bunchers Engine Supplement
Tilt Cylinder (Rear for Cab Leveling) - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
An Improved Tilt Cylinder Group is Now Used for Certain 522B Track Feller Bunchers {5104, 5456}
An Improved Tilt Cylinder Group is Now Used for Certain 522B Track Feller Bunchers {5104, 5456}

Caterpillar Parts SIS Catalog 522B :

CYLINDER GP-STICK
215-9092 CYLINDER GP-STICK
CYLINDER GP-HYDRAULIC
457-4659 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
289-7868 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
215-9097 CYLINDER GP-HYDRAULIC
CYLINDER GP-HOOD TILT
251-8281 CYLINDER GP-HOOD TILT
CYLINDER GP-BOOM
322-3568 CYLINDER GP-BOOM
CYLINDER AR-HYDRAULIC
379-5858 CYLINDER AR-HYDRAULIC
CYLINDER AR-HYDRAULIC
376-7991 CYLINDER AR-HYDRAULIC
CYLINDER GP-TILT
274-7480 CYLINDER GP-TILT
CYLINDER GP-TILT
282-9611 CYLINDER GP-TILT
DRIVE AR-SWING
339-8310 DRIVE AR-SWING
DRIVE AR-SWING
339-8310 DRIVE AR-SWING
DRIVE AR-SWING
339-8310 DRIVE AR-SWING
DRIVE AR-SWING
339-8310 DRIVE AR-SWING
DRIVE AR-SWING
339-8310 DRIVE AR-SWING
DRIVE GP-SWING
201-7808 DRIVE GP-SWING

Truck sale:

 
 
Caterpillar 522B
- Feller bunchers
PETERSON TRACTOR CO
Caterpillar 522B, Mulcher, Landmaschinen
315.000 
Caterpillar 522B, Mulcher, Landmaschinen
- Pasture mowers and toppers
WESTERN STATES EQUIPMENT
Caterpillar 522B, Mulcher, Landmaschinen
 
Caterpillar 522B, Mulcher, Landmaschinen
- Pasture mowers and toppers
WESTERN STATES EQUIPMENT
 
409.500 
Caterpillar 522B, Forstanhänger/Rückewagen, Forstmaschinen
- Feller bunchers
PETERSON TRACTOR CO
 
315.000 
Caterpillar 522B, Mulcher, Landmaschinen


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.