POWER TRAIN
MOTOR GPAXLE GP
POWER TRAIN AR
PUMP GP
SHAFT GP
WHEEL GP
POWER TRAIN
MOTOR GP
#SEBP51340110
364-4621: MOTOR GP-PISTON
For full view, you need register
Parts for your 2470C WHEEL FELLER BUNCHER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 420-2898 | [1] | VALVE GP-SOLENOID (PISTON) | |
| 1A. | 420-2899 | [1] | KIT-COIL | |
| 2. | 377-5478 | [1] | VALVE AS-CONTROL (PROPEL MOTOR) | |
| 3. | 377-5461 | [1] | VALVE AS-SHUTTLE | |
| 4. | 377-5462 | [1] | SPOOL-CONTROL | |
| 5. | 377-5467 | [1] | SPRING | |
| 6. | 377-5468 | [1] | FITTING AS | |
| 7. | 377-5469 | [1] | SEAL-CONTROL | |
| 8. | 377-5470 | [1] | PISTON-SERVO | |
| 9. | 276-1849 | [1] | SEAL-LIP TYPE | |
| 10. | 377-5471 | [1] | RING-RETAINING | |
| 11. | 4D-2297 | [1] | SEAL-O-RING | |
| 12. | 377-5472 | [1] | SPOOL | |
| 13. | 377-5473 | [2] | SPRING | |
| 14. | 377-5474 | [1] | VALVE AS-RELIEF (PROPEL) | |
| 15. | 377-5475 | [1] | SEAL-O-RING | |
| 16. | 377-5476 | [1] | PLATE-BEARING | |
| 17. | 3J-1907 | [1] | SEAL-O-RING | |
| 18. | 6E-3283 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 19. | 132-3587 | [1] | CAP | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 377-5481 | KIT-MOTOR REPAIR | |||
| (KIT INCLUDES O-RINGS, CONTROL SEAL, LIP SEAL, END CAP GASKET, SEAL LOCK NUT) | ||||
| M | METRIC PART | |||
#SEBP51340111
355-4171: MOUNTING GP-AXLE
For full view, you need register
Parts for your 2470C WHEEL FELLER BUNCHER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-2434 M | [8] | BOLT (M24X3X170-MM) | |
| 2. | 6V-1746 | [4] | DOWEL | |
| 3. | 7X-0383 | [80] | BOLT (7/8-9X2.75-IN) | |
| 4. | 7X-2476 M | [8] | BOLT (M24X3X220-MM) | |
| 5. | 8C-6913 | [80] | WASHER-HARD (24X41.5X4-MM THK) | |
| 6. | 8T-4001 M | [8] | NUT (M24X3-THD) | |
| 7. | 8T-4167 | [24] | WASHER-HARD (26X44X4-MM THK) | |
| M | METRIC PART | |||
#SEBP51340112
209-9298: PLANETARY GP-FINAL DRIVE
209-9298 PLANETARY GP-FINAL DRIVE
S/N W2M1-UP
PART OF 388-7376 AXLE AR-OSCILLATING
S/N W2M1-UP
PART OF 388-7376 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 2470C WHEEL FELLER BUNCHER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-7157 | [1] | CARRIER-PLANETARY | |
| 2. | 444-2262 | [6] | WASHER-THRUST | |
| 3. | 143-7509 | [3] | SHAFT-PLANETARY | |
| 4. | 143-7510 | [3] | BUSHING | |
| 5. | 133-4952 | [4] | DOWEL | |
| 6. | 138-1645 | [3] | PIN-SPRING | |
| 7. | 139-4130 | [1] | GEAR-SUN (15-TEETH) | |
| 8. | 384-6493 | [1] | GEAR-RING (66-TEETH) | |
| 9. | 143-7154 | [3] | GEAR-PLANETARY (24-TEETH) | |
| 10. | 3P-7832 | [4] | DOWEL | |
| 11. | 8T-2925 | [3] | PIN-SPRING |
#SEBP51340113
376-1636: POWER TRAIN AR
For full view, you need register
Parts for your 2470C WHEEL FELLER BUNCHER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 344-1032 Y | [1] | AXLE AR-FIXED | ||
| 388-7376 Y | [1] | AXLE AR-OSCILLATING | ||
| 355-4170 Y | [1] | BRAKE GP-PARKING | ||
| 376-1637 Y | [1] | DRIVE GP-PUMP | ||
| 354-1785 Y | [1] | LINES GP-DIFF LOCK & PARK BK | ||
| 380-1532 Y | [1] | LINES GP-DIFF LOCK & PARK BK | ||
| 368-4284 Y | [1] | LINES GP-PROPEL | ||
| 354-1782 Y | [1] | MOTOR & MTG GP-PROPEL | ||
| 355-4171 Y | [1] | MOUNTING GP-AXLE | ||
| 354-1783 Y | [1] | PUMP & MTG GP-PROPEL | ||
| 375-1110 Y | [1] | SHAFT GP-DRIVE | ||
| 354-1651 Y | [1] | TRANSMISSION & MOUNTING GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51340114
354-1783: PUMP & MTG GP-PROPEL
For full view, you need register
Parts for your 2470C WHEEL FELLER BUNCHER:
#SEBP51340115
364-4620: PUMP GP-PISTON
For full view, you need register
Parts for your 2470C WHEEL FELLER BUNCHER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 077-8353 | [4] | PIN (SPRING) | |
| 2. | 9S-8002 | [2] | PLUG (7/16-20-THD) | |
| 3. | 9S-8008 | [6] | PLUG (1-1/16-12-THD) | |
| 4. | 311-8750 | [2] | SCREEN-FILTER (PISTON PUMP) | |
| 5. | 418-0166 | [2] | RETAINER | |
| 6. | 398-7704 | [1] | KIT-CYLINDER BLOCK | |
| (INCLUDES CYLINDER BLOCK, RETAINING RING, BALL GUIDE, SLIPPER GUIDE & PISTON AS KIT) | ||||
| 7. | 418-0199 | [1] | PIN | |
| 8. | 377-4678 | [1] | PLATE | |
| 9. | 311-0326 | [1] | VALVE GP-CONTROL (PROPEL PUMP) | |
| 8C-6965 M | [6] | BOLT-SOCKET HEAD (M6X1X45-MM) | ||
| 099-2374 M | [6] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | ||
| 311-0327 | [2] | VALVE | ||
| 311-8750 | [1] | SCREEN-FILTER (PROPEL PUMP) | ||
| 10. | 377-4679 | [1] | SWASHPLATE | |
| 11. | 418-1399 | [1] | LINK-FEEDBACK | |
| 12. | 418-1411 | [2] | PIN-DOWEL | |
| 13. | 418-1414 | [1] | KIT-SERVO PISTON | |
| (INCLUDES BLOCK SLIDER, SEAL O-RINGS & RING PISTONS) | ||||
| 14. | 418-1415 | [2] | KIT-SERVO CYLINDER | |
| (EACH INCLUDES SEAL) | ||||
| 15. | 418-1417 | [2] | PLATE-LOCK | |
| 16. | 418-1418 | [4] | BOLT-FLANGE HEAD | |
| 17. | 388-0729 | [2] | ORIFICE | |
| 18. | 418-1420 | [1] | GASKET-END CAP | |
| 19. | 418-0175 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 20. | 418-0176 | [3] | PLUG GP-HYDRAULIC LINES | |
| (EACH INCLUDES) | ||||
| 4J-7533 | [1] | SEAL-O-RING | ||
| 21. | 418-1421 | [4] | BOLT-SOCKET HEAD | |
| 22. | 418-1422 | [2] | BOLT-SOCKET HEAD | |
| 23. | 422-1117 | [1] | BEARING-JOURNAL | |
| 26. | 418-1425 | [1] | ORIFICE | |
| 27. | 377-4684 | [1] | SHAFT-PUMP | |
| 28. | 377-4685 | [1] | BALL BEARING | |
| 29. | 377-4686 | [2] | RING-RETAINING | |
| 30. | 418-1426 | [1] | KIT-SEAL (CARRIER) | |
| (INCLUDES SEALS) | ||||
| 31. | 377-4689 | [1] | RING-RETAINING | |
| 32. | 418-1427 | [1] | ADAPTER | |
| 33. | 377-4690 | [1] | SEAL-ADAPTER | |
| 34. | 377-4691 | [1] | SHAFT-PUMP | |
| 35. | 418-1428 | [4] | BOLT-SOCKET HEAD | |
| 36. | 311-8132 | [1] | PLATE-THRUST | |
| 37. | 418-1429 | [2] | KIT-SEAL (RELIEF VALVE) | |
| (EACH INCLUDES SEALS) | ||||
| 38. | 377-4697 | [1] | BEARING AS | |
| 39. | 311-0324 | [2] | KIT-VALVE (LIMIT SWITCH) | |
| (EACH INCLUDES PRESSURE VALVE & O-RING SEAL) | ||||
| 40. | 377-4698 | [1] | KIT-CHARGE PUMP | |
| 41. | 311-0325 | [1] | KIT-VALVE | |
| (INCLUDES NUT, VALVE, & SEAL) | ||||
| 42. | 3J-7354 | [3] | SEAL-O-RING | |
| 43. | 3D-2824 | [6] | SEAL-O-RING | |
| 44. | 377-4699 | [2] | RING-SEAL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 377-4700 | [1] | KIT-OVERHAUL SEAL | ||
| (KIT INCLUDES SEAL O-RINGS, SEAL NUTS, CONTROL SEAL, END CAP GASKET, PLUG AS, LIP SEAL, ADAPTER SEAL, | ||||
| SPECIAL PROFILE SEAL RINGS, FILTER ADAPTER GASKET & GLYD RINGS) | ||||
| M | METRIC PART | |||
#SEBP51340116
375-1110: SHAFT GP-DRIVE
For full view, you need register
Parts for your 2470C WHEEL FELLER BUNCHER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 378-2793 CY | [1] | SLIP JOINT GP | |
| 2. | 378-2794 C | [1] | SHAFT GP-DRIVE | |
| 2A. | 105-3485 M | [12] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | |
| 382-9197 | [1] | YOKE-END | ||
| 391-4098 | [2] | UNIVERSAL JOINT GP | ||
| (EACH INCLUDES) | ||||
| 5P-8334 | [1] | FITTING-HYDRAULIC | ||
| 3. | 387-5426 Y | [1] | SLIP JOINT GP | |
| 4. | 8T-0273 M | [8] | BOLT-SOCKET HEAD (M12X1.75X40-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51340117
378-2793: SLIP JOINT GP
For full view, you need register
#SEBP51340118
387-5426: SLIP JOINT GP
For full view, you need register
#SEBP51340119
375-1108: TIRE & RIM AR
For full view, you need register
Parts for your 2470C WHEEL FELLER BUNCHER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 354-2160 | [2] | STOP | |
| 2. | 375-1107 | [4] | TIRE & RIM GP | |
| (EACH INCLUDES) | ||||
| [1] | TIRE (34-25) | |||
| 378-2784 | [1] | RIM AS (25X30) | ||
| 3. | 361-0400 | [8] | PLATE | |
| 4. | 375-1119 | [2] | PLATE | |
| 5. | 8T-4174 M | [4] | BOLT (M16X2X120-MM) | |
| 6. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 8. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
