AVSPARE.COM
parts catalog

502-6504 CYLINDER HEAD GP S/N MYE1-UP PART OF 376-4489, 528-7193 ENGINE AR-CORE ALSO AN ATTACHMENT 2864C


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
CYLINDER HEAD GP
DAMPER GP
FLYWHEEL GP
GEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
LIFTING GP-ENGINE
AIR COMPRESSOR GP


BASIC ENGINE

CYLINDER HEAD GP
 

#SEBP51450030
 

502-6504: CYLINDER HEAD GP

502-6504 CYLINDER HEAD GP
S/N MYE1-UP
PART OF 376-4489, 528-7193 ENGINE AR-CORE
ALSO AN ATTACHMENT
i06914791 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 262-1940 [1] GASKET AS-CYLINDER HEAD  
2. 290-6884 Y [26] FASTENER GP-CYLINDER HEAD  
3. 497-5506 Y [1] CYLINDER HEAD GP  
4. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
5. 9X-6000 M [6] BOLT (M8X1.25X180-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP51450031
 

211-8041: DAMPER GP

211-8041 DAMPER GP
S/N MYE1-UP
13 INCH
PART OF 453-6662, 521-9206 ENGINE AR-COMPLETE
FOR USE WITH CRANK PULLEY GP
ALSO AN ATTACHMENT
i01789927 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 208-9619 [1] DAMPER AS-VIBRATION  
 

#SEBP51450032
 

290-6884: FASTENER GP-CYLINDER HEAD

290-6884 FASTENER GP-CYLINDER HEAD
S/N MYE1-UP
PART OF 346-0485, 502-6504 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i03296184 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-2915 M [1] BOLT-12 POINT HEAD (M16X2X180-MM)  
2. 9X-8268 [1] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#SEBP51450033
 

218-0859: FASTENER GP-DAMPER & PULLEY

218-0859 FASTENER GP-DAMPER & PULLEY
S/N MYE1-UP
PART OF 453-6662, 521-9206 ENGINE AR-COMPLETE
FOR USE WITH @@@@@211-8041@@@@@
ALSO AN ATTACHMENT
i01790016 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-3621 [1] SPACER (101.5X167X8-MM THK)  
2. 6V-4249 M [8] BOLT (M10X1.5X50-MM)  
  M   METRIC PART
 

#SEBP51450034
 

200-0875: FLYWHEEL GP

200-0875 FLYWHEEL GP
S/N MYE1-UP
PART OF 453-6662, 521-9206 ENGINE AR-COMPLETE
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
i01506577 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-1368 [1] FLYWHEEL AS  
  4N-2514 [1] GEAR (113-TEETH)  
2. 203-1074 M [8] BOLT-SOCKET HEAD (M16X2X55-MM)  
3. 2S-5658 [8] WASHER-HARD (17X29X3-MM THK)  
  M   METRIC PART
 

#SEBP51450035
 

294-2931: GEAR GP-FRONT

294-2931 GEAR GP-FRONT
S/N MYE1-UP
PART OF 376-4489, 528-7193 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02621517 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-6069 [1] PLATE-THRUST  
2. 115-4219 [1] PLATE-RETAINING  
3. 200-4495 [1] SHAFT-IDLER  
4. 296-5412 [1] GEAR AS-IDLER (40-TEETH)  
5. 136-4183 M [1] BOLT-12 POINT HEAD (M10X1.5X30-MM)  
6. 6V-5843 M [2] BOLT (M10X1.5X45-MM)  
  M   METRIC PART
 

#SEBP51450036
 

344-2902: HOUSING GP-FLYWHEEL

344-2902 HOUSING GP-FLYWHEEL
S/N MYE1-UP
PART OF 453-6662, 521-9206 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i04121951 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-1445 [1] COVER  
2. 422-0186 [1] HOUSING-FLYWHEEL  
3. 061-9455 [1] SEAL-O-RING  
4. 6V-1176 [1] PLUG-DRAIN (MAGNETIC)  
5. 389-3728 [1] PLUG AS  
  238-5084 [1] SEAL-O-RING  
  360-3684 [1] PLUG  
6. 371-7186 [2] PLUG AS  
    (EACH INCLUDES)
  214-7567 [1] SEAL-O-RING  
  360-3678 [1] PLUG-O-RING  
7. 5P-8245 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
9. 6V-8197 M [14] BOLT (M12X1.75X40-MM)  
10. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
11. 106-1565 [1] PLUG  
12. 3B-1925 [1] WASHER (0.766X1X0.064-IN THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP51450037
 

299-8022: HOUSING GP-FRONT

299-8022 HOUSING GP-FRONT
S/N MYE1-UP
PART OF 453-6662, 521-9206 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02622470 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 296-7523 [1] HOUSING-FRONT  
  288-5726 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)  
2. 6V-5217 M [8] BOLT (M8X1.25X20-MM)  
3. 6V-3918 M [4] BOLT (M8X1.25X50-MM)  
4. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP51450038
 

355-7364: LIFTING GP-ENGINE

355-7364 LIFTING GP-ENGINE
S/N MYE1-UP
PROVIDES FRONT AND REAR LIFTING EYES
PART OF 453-6662, 521-9206 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i04786583 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 381-9172 C [1] PLATE-LIFTING (REAR)  
2. 355-7363 [1] PLATE-LIFTING (FRONT)  
3. 5P-8245 C [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 6V-8675 CM [2] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP51450039
 

344-0368: MOUNTING GP-ALTERNATOR & COMPR

344-0368 MOUNTING GP-ALTERNATOR & COMPR
S/N MYE10244-UP
PROVIDES ALTERNATOR AND AIR CONDITIONING COMPRESSOR MOUNTING GP LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE, INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 453-6662 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATORS AND COMPRESSORS
CANNOT BE USED WITH HINGE MOUNTED ALTERNATORS AND COMPRESSORS
ALSO AN ATTACHMENT
i03902534 SEBP5145
  For full view, you need register

Parts for your 2864C SITE PREP TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 243-2310 W [1] COVER  
2. 279-2589 [1] PULLEY AS-IDLER (8-GROOVE)  
3. 333-1207 J [1] IDLER AS  
4. 344-0369 [1] SUPPORT AS  
  332-9270 [2] BUSHING  
  344-0370 [1] BRACKET-SUPPORT  
5. 347-7963 [1] TENSIONER-BELT  
6. 6V-4249 M [6] BOLT (M10X1.5X50-MM)  
7. 6V-5839 [7] WASHER (11X21X2.5-MM THK)  
8. 8T-0644 M [1] BOLT (M10X1.5X90-MM)  
  J   PART MARKED J HAS INTEGRATED COVER BUILT INTO IT, DOES NOT USE 243-2310
  M   METRIC PART
  W   PART MARKED W IS USED WITH NON-SERVICED IDLER 334-3353 ONLY
 

Information:

Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Disassembly and Assembly
Camshaft Bearings - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Inlet and Exhaust Valves - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
C9.3
Engines for Caterpillar Built Machines

Cylinder Head - Remove
C9.3
Engines for Caterpillar Built Machines

Cylinder Head - Install
C9.3
Engines for Caterpillar Built Machines

Electronic Unit Injector Sleeve - Remove and Install
C13
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
C13
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Springs - Remove and Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valves - Remove and Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13
Engines for Caterpillar Built Machines

Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines

Cylinder Head - Remove and Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
C9.3
Engines for Caterpillar Built Machines

Unit Injector Sleeve - Remove
C9.3
Engines for Caterpillar Built Machines

Unit Injector Sleeve - Install
C9.3
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 2864C :

Truck sale:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.