LUBRICATION SYSTEM
PUMP GP-PRELUBRICATIONPUMP GP-SCAVENGE
LINES GP-ENGINE OIL
VALVE GP-PRIORITY
LUBRICATION SYSTEM
PUMP GP-PRELUBRICATION
#SEBP51630430
1W-0899: PUMP GP-PRELUBRICATION
1W-0899 PUMP GP-PRELUBRICATION (CHG -04 THRU -08)
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-4776 Y | [1] | PUMP GP-PRELUBRICATION | |
| 2. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 3. | 8M-9024 | [4] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 4. | 9Y-3297 | [1] | BRACKET AS | |
| 5. | 1B-7182 | [4] | BOLT (5/16-18X1.25-IN) | |
| 6. | 1T-0689 | [4] | WASHER (9.93X22.22X2.54-MM THK) | |
| 7. | 5S-0003 | [4] | NUT (5/16-18-THD) | |
| 8. | 7C-5616 | [1] | SILENCER-EXHAUST | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51630431
1W-4776: PUMP GP-PRELUBRICATION
1W-4776 PUMP GP-PRELUBRICATION (CHG -00 THRU -02, 3N-1287-03)
PART OF 1W-0899 PUMP GP-PRELUBRICATION
FOR USE WITH AIR STARTER
PART OF 1W-0899 PUMP GP-PRELUBRICATION
FOR USE WITH AIR STARTER
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5N-6668 | [1] | HOUSING | |
| 2. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 3. | 6D-3910 | [1] | SCREW-BUTTON HEAD (10-32X0.25-IN) | |
| 4. | 3N-1284 | [1] | IDLER AS (7-TEETH) | |
| 5. | 3N-1283 | [1] | HEAD AS | |
| 6. | 0S-1617 | [9] | BOLT (5/16-18X0.75-IN) | |
| 7. | 2N-7520 | [1] | GASKET | |
| 8. | 2N-7521 | [1] | COVER | |
| 9. | 3N-1285 | [1] | ROTOR | |
| 10. | 1H-5959 | [2] | SEAL-LIP TYPE | |
| 11. | 6F-2172 | [1] | KEY | |
| 12. | 3N-1287 J | [1] | MOTOR GP-PRELUBRICATION | |
| AVAILABLE REPAIR KIT(S): | ||||
| 2N-7522 | [1] | KIT-GASKET (PRELUBRICATION PUMP) | ||
| (INCLUDES GASKETS) | ||||
| 5N-7776 J | [1] | KIT-MOTOR REPAIR (STARTING MOTOR) | ||
| (INCLUDES VANES, PINS, BEARING, SEALS, SPRINGS, END CAP, GASKETS & O-RING) | ||||
| 2W-6083 J | [1] | KIT-GASKET (STARTING MOTOR) | ||
| (INCLUDES GASKETS, END CAP & O-RING) | ||||
| J | KITS MARKED J AVAILABLE FOR PART MARKED J | |||
#SEBP51630432
221-0129: PUMP GP-PRELUBRICATION
221-0129 PUMP GP-PRELUBRICATION (CHG -00)
50/60 HZ
50/60 HZ
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-3910 | [1] | SCREW-BUTTON HEAD (10-32X0.25-IN) | |
| 2. | 6F-2172 | [1] | KEY | |
| 3. | 164-6343 | [1] | VALVE-RELIEF | |
| 4. | 173-3855 | [1] | IDLER AS | |
| 5. | 173-3856 | [1] | HEAD AS | |
| 6. | 173-3859 | [1] | HOUSING | |
| 7. | 173-3864 | [1] | GASKET | |
| 8. | 173-3867 Y | [1] | ROTOR | |
| 9. | 221-0132 | [1] | MOTOR AS-ELECTRIC (2-HP, 50/60-HZ, 200-V TO 480-V) | |
| 10. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 11. | 0S-1617 | [5] | BOLT (5/16-18X0.75-IN) | |
| 12. | 1D-4539 | [4] | BOLT (5/16-18X2.5-IN) | |
| 13. | 1H-5959 | [2] | SEAL-LIP TYPE | |
| 14. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| AVAILABLE GASKET KIT(S): | ||||
| 173-3857 | [1] | KIT-GASKET (PRELUBRICATION PUMP) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51630433
483-9014: PUMP GP-PRELUBRICATION
483-9014 PUMP GP-PRELUBRICATION (CHG -00)
50/60 HERTZ
50/60 HERTZ
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 164-6343 | [1] | VALVE-RELIEF | |
| 2. | 173-3855 | [1] | IDLER AS | |
| 3. | 173-3856 | [1] | HEAD AS | |
| 4. | 173-3859 | [1] | HOUSING | |
| 5. | 173-3864 | [1] | GASKET | |
| 6. | 173-3867 | [1] | ROTOR | |
| 7. | 483-9013 | [1] | MOTOR AS | |
| 8. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 9. | 0S-1617 | [5] | BOLT (5/16-18X0.75-IN) | |
| 10. | 1D-4539 | [4] | BOLT (5/16-18X2.5-IN) | |
| 11. | 1H-5959 | [2] | SEAL-LIP TYPE | |
| 12. | 6D-3910 | [1] | SCREW-BUTTON HEAD (10-32X0.25-IN) | |
| 13. | 6F-2172 | [1] | KEY | |
| AVAILABLE GASKET KIT(S): | ||||
| 173-3857 | [1] | KIT-GASKET (PRELUBRICATION PUMP) | ||
#SEBP51630434
2W-8186: PUMP GP-SCAVENGE
2W-8186 PUMP GP-SCAVENGE (CHG -01 THRU -04)
ONE SECTION GEAR
ONE SECTION GEAR
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-0674 Y | [1] | PUMP GP-ENGINE OIL | |
| 2. | 1W-2058 | [1] | WASHER (20X80X19-MM THK) | |
| 3. | 9S-1364 | [1] | BOLT (3/4-16X3.5-IN) | |
| 4. | 512-3009 | [1] | GEAR-PUMP DRIVE (59-TEETH) | |
| 5. | 6V-7702 | [1] | SEAL-O-RING | |
| 6. | 0S-1595 | [8] | BOLT (1/2-13X1.25-IN) | |
| 7. | 6V-3538 | [1] | DOWEL | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51630435
244-0481: SHIELD GP-ENGINE OIL LINES
244-0481 SHIELD GP-ENGINE OIL LINES (CHG -00 THRU -02)
ANTI-SPLASH
ANTI-SPLASH
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-3860 B | TAPE (ANTI-SPLASH, 50-MM WIDE)(10-M ROLL) | ||
| B | USE AS REQUIRED | |||
#SEBP51630436
244-0482: SHIELD GP-ENGINE OIL LINES
244-0482 SHIELD GP-ENGINE OIL LINES (CHG -00 THRU -02)
ANTI-SPLASH
ANTI-SPLASH
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-3860 B | TAPE (ANTI-SPLASH, 50-MM WIDE)(10-M ROLL) | ||
| B | USE AS REQUIRED | |||
#SEBP51630437
244-0483: SHIELD GP-ENGINE OIL LINES
244-0483 SHIELD GP-ENGINE OIL LINES (CHG -00 THRU -02)
ANTI-SPLASH
ANTI-SPLASH
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-3860 B | TAPE (ANTI-SPLASH, 50-MM WIDE)(10-M ROLL) | ||
| B | USE AS REQUIRED | |||
#SEBP51630438
174-6451: VALVE GP-PRIORITY
174-6451 VALVE GP-PRIORITY (CHG -00 THRU -02)
FOR USE WITH REMOTE MOUNTED OIL FILTERS
FOR USE WITH REMOTE MOUNTED OIL FILTERS
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-0644 | [6] | BOLT (3/8-16X2.25-IN) | |
| 2. | 1W-2240 | [1] | SPRING-CONTROL VALVE | |
| 3. | 1W-2242 | [1] | PISTON-INNER | |
| 4. | 2G-5664 | [1] | SPRING | |
| 5. | 3V-3308 | [6] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
| 6. | 366-4699 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 360-3692 | [1] | PLUG | ||
| 7. | 6V-3835 | [1] | SEAL-O-RING | |
| 8. | 7W-7825 | [1] | BODY-VALVE | |
| 9. | 7W-9423 | [1] | COVER | |
| 10. | 7W-9425 | [1] | PISTON | |
| 11. | 174-6450 | [1] | PISTON | |
#SEBP51630439
1W-0804: VALVE GP-PRIORITY
1W-0804 VALVE GP-PRIORITY (CHG -07 THRU -10)
PART OF 392-5445 ENGINE AR-COMPLETE
Type 1
PART OF 392-5445 ENGINE AR-COMPLETE
Type 1
For full view, you need register
Parts for your C280-16 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-2243 | [1] | PISTON-CONTROL VALVE | |
| 2. | 244-3712 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 3. | 1W-2242 | [1] | PISTON-INNER | |
| 4. | 6V-3835 C | [1] | SEAL-O-RING | |
| 5. | 1M-0644 C | [6] | BOLT (3/8-16X2.25-IN) | |
| 6. | 3V-3308 C | [6] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
| 7. | 7W-9423 C | [1] | COVER | |
| 8. | 7W-9425 C | [1] | PISTON | |
| 9. | 1W-2240 | [1] | SPRING-CONTROL VALVE | |
| 10. | 7W-7825 C | [1] | BODY-VALVE | |
| 11. | 2G-5664 C | [1] | SPRING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
LUBRICATION SYSTEM
PUMP GP-PRELUBRICATION
Engine News
A New Prelubrication Oil Pressure Switch Is Used on All 3600 and C280 Engines {1319, 7426}
2014/02/07
2014/02/07
Operation and Maintenance Manual
Specifications
Troubleshooting
Disassembly and Assembly
