ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP51710250
161-6058: WIRING GP-CAB
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9043 | [2] | BOLT (5/16-18X0.875-IN) | |
| 2. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 3. | 223-8551 | [1] | COVER AS | |
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 4. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 5. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 4D-6565 | [1] | WIRE AS (6-GA) | |
| 7. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 8. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 8T-9364 | [2] | BOLT (1/4-20X0.625-IN) | |
| 10. | 9G-8451 | [1] | BLOCK AS |
#SEBP51710251
269-0246: WIRING GP-CAB
269-0246 WIRING GP-CAB -LOWER
S/N 9YZ1-563
PART OF 318-7517 OPERATOR AR, 318-7520 OPERATOR AR-ENCLOSED ROPS, 318-7518 OPERATOR AR-OPEN ROPS
AN ATTACHMENT
S/N 9YZ1-563
PART OF 318-7517 OPERATOR AR, 318-7520 OPERATOR AR-ENCLOSED ROPS, 318-7518 OPERATOR AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 316-2926 Y | [1] | SWITCH GP-MAGNETIC | |
| 2. | 116-0118 | [3] | CLIP | |
| 3. | 124-2716 | [2] | SPACER (12.6X16X20-MM) | |
| 4. | 8T-4205 | [7] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 8T-9364 | [2] | BOLT (1/4-20X0.625-IN) | |
| 6. | 8T-5391 | [10] | BOLT (5/16-18X0.5-IN) | |
| 7. | 8T-4224 | [21] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 237-4990 | [1] | HARNESS AS-POWER (ENCLOSURE) | |
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(25-CM) | |||
| 9. | 163-5807 | [2] | TIE-CABLE | |
| 10. | 156-8665 Y | [1] | RELAY GP (PARKING BRAKE) | |
| 11. | 2N-0402 | [4] | BOLT-SOCKET HEAD (10-24X1.75-IN) | |
| 12. | 156-8664 Y | [1] | RELAY GP (REVERSE ALARM) | |
| 13. | 5P-7854 | [2] | CLIP | |
| 14. | 8T-9367 | [2] | BOLT (1/4-20X2-IN) | |
| 15. | 186-9693 | [1] | BRACKET AS | |
| 16. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 17. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 18. | 4P-7581 | [4] | CLIP (LADDER) | |
| 19. | 6V-1889 | [2] | CLIP (LOOP) | |
| 20. | 186-9694 | [1] | BRACKET AS | |
| 21. | 3E-6328 Y | [1] | ALARM GP (24-VOLT)(CATERPILLAR MONITORING SYSTEM) | |
| 22. | 269-0245 | [1] | HARNESS AS-CAB (LOWER) | |
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 8T-8729 | [141] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 222-5531 | [1] | PLUG AS (SPLICE) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 222-8723 | [1] | PLUG AS (SPLICE) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3132 | [1] | SEAL-CONNECTOR (40-PIN) | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [5] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [7] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [3] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [68] | PLUG-SEAL | ||
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [3] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [3] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [5] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [6] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-7148 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 212-4331 | [3] | RECEPTACLE AS (4-PIN) | ||
| (EACH INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 212-4334 | RECEPTACLE AS-CONNECTOR (SPLICE) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 212-4342 | [1] | RECEPTACLE AS (12-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 212-8436 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 217-5938 | [1] | RECEPTACLE AS-CONNECTOR (SPLICE) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 321-4624 E | SLEEVE (60-CM) | |||
| 321-4625 E | SLEEVE (75-CM) | |||
| 321-4630 E | SLEEVE (70-CM) | |||
| 7N-7779 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8T-8730 | [179] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(18-CM) | |||
| 25. | 237-5007 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 26. | 226-2130 | [1] | HARNESS AS-CAB (MAIN) | |
| 8T-8729 | [135] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 214-3898 | [2] | PLUG AS | ||
| (EACH INCLUDES) | ||||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 110-6846 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 110-6848 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 110-6844 | [1] | SEAL | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [115] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [2] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [7] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7X-6195 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9X-0145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 103-0213 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 212-4331 | [1] | RECEPTACLE AS (4-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 212-4333 | [1] | RECEPTACLE AS (12-PIN) | ||
| 212-4342 | [1] | RECEPTACLE AS (12-PIN) | ||
| (EACH RECEPTACLE AS INCLUDES) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 212-8436 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 321-4624 E | SLEEVE (150-CM) | |||
| 321-4625 E | SLEEVE (145-CM) | |||
| 321-4628 E | SLEEVE (25-CM) | |||
| 321-4630 E | SLEEVE (80-CM) | |||
| 8T-8730 | [149] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM) | |||
| 31. | 155-4211 Y | [1] | CONTROL & MTG GP-POWER TRAIN | |
| 32. | 224-2824 | [1] | CLAMP | |
| 33. | 1K-9007 | [1] | GROMMET | |
| 34. | 186-9598 | [1] | WIRE AS | |
| 35. | 3S-2093 | [38] | STRAP-CABLE | |
| 37. | 183-6459 Y | [1] | PEDAL GP-GOVERNOR | |
| 38. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 39. | 8T-8908 | [2] | BOLT (1/4-20X1-IN) | |
| 40. | 186-9588 | [1] | HARNESS AS-WIRING (NEUTRALIZER) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM) | |||
| 41. | 186-9596 | [1] | HARNESS AS-WIRING (SHIFT CONTROL) | |
| 155-2265 | [2] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 321-4628 E | SLEEVE (150-CM) | |||
| 8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 42. | 2D-2751 | [1] | GROMMET | |
| 43. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 6H-4005 | [1] | GROMMET | |
| 45. | 186-9031 | [1] | WIRE AS | |
| 46. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 47. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 48. | 9G-9152 | [1] | CLIP | |
| 49. | 115-3072 | [1] | CLIP AS-CONNECTING (8-PIN) | |
| 50. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 51. | 224-2825 | [1] | HARNESS AS-WIRING (HORN RELAY) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 210-6311 | [1] | RECEPTACLE AS-CONNECTOR (SPLICE) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.5-M) | |||
| 321-4628 E | SLEEVE (10-CM) | |||
| 8T-8730 | [13] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 54. | 3E-5239 | [1] | RELAY AS (24-VOLT)(BUCKET EJECTOR) | |
| 57. | 238-1357 | [1] | PLUG | |
| 169-0705 | [12] | SEAL | ||
| 58. | 351-1132 | [1] | CONTROL AS-BRAKE | |
| 59. | 5K-0906 | [5] | BOLT (5/16-18X0.625-IN) | |
| 60. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 61. | 9X-3495 | [1] | CLIP AS | |
| 62. | 8C-3121 | [2] | BOLT (5/16-18X1.5-IN) | |
| 63. | 130-5300 | [22] | CLIP | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51710252
338-6659: WIRING GP-CAB
338-6659 WIRING GP-CAB -FOPS
S/N 9YZ1-UP
LOWER
PART OF 318-7517 OPERATOR AR, 318-7520 OPERATOR AR-ENCLOSED ROPS, 318-7518 OPERATOR AR-OPEN ROPS
AN ATTACHMENT
S/N 9YZ1-UP
LOWER
PART OF 318-7517 OPERATOR AR, 318-7520 OPERATOR AR-ENCLOSED ROPS, 318-7518 OPERATOR AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(CAB) | |
| 2. | 3E-6328 Y | [1] | ALARM GP (24-VOLT) | |
| 3. | 9X-3495 | [1] | CLIP AS | |
| 4. | 116-0118 | [4] | CLIP | |
| 5. | 155-4211 Y | [1] | CONTROL & MTG GP-POWER TRAIN | |
| 6. | 156-8664 Y | [1] | RELAY GP (REVERSE ALARM) | |
| 7. | 156-8665 Y | [1] | RELAY GP (PARKING BRAKE CONTROL) | |
| 8. | 186-9031 | [1] | WIRE AS | |
| 9. | 186-9588 Y | [1] | HARNESS AS-WIRING (NEUTRALIZER) | |
| 10. | 186-9596 | [1] | HARNESS AS-WIRING (SHIFT CONTROL) | |
| 155-2265 | [2] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 321-4628 E | SLEEVE (150-CM) | |||
| 8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 186-9598 | [1] | WIRE AS | |
| 12. | 186-9693 | [1] | BRACKET AS | |
| 13. | 186-9694 | [1] | BRACKET AS | |
| 14. | 224-2824 | [1] | CLAMP | |
| 15. | 224-2825 Y | [1] | HARNESS AS-WIRING (HORN RELAY) | |
| 16. | 237-4990 | [1] | HARNESS AS-POWER (ENCLOSURE) | |
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(25-CM) | |||
| 17. | 237-5007 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 18. | 238-1357 | [1] | PLUG | |
| 19. | 316-2926 Y | [1] | SWITCH GP-MAGNETIC (CAB) | |
| 20. | 338-6644 Y | [1] | HARNESS AS-CAB (PART A) | |
| 21. | 338-6645 Y | [1] | HARNESS AS-CAB (PART B) | |
| 22. | 351-1132 | [1] | CONTROL AS-BRAKE | |
| 23. | 115-3072 | [1] | CLIP AS-CONNECTING (8-PIN) | |
| 24. | 124-2716 | [2] | SPACER (12.6X16X20-MM) | |
| 25. | 130-5300 | [15] | CLIP | |
| 26. | 163-5807 | [2] | TIE-CABLE | |
| 27. | 1K-9007 | [1] | GROMMET | |
| 28. | 2D-2751 | [1] | GROMMET | |
| 29. | 2N-0402 | [4] | BOLT-SOCKET HEAD (10-24X1.75-IN) | |
| 30. | 3S-2093 | [36] | STRAP-CABLE | |
| 31. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 32. | 4P-7581 | [5] | CLIP (LADDER) | |
| 33. | 5K-0906 | [8] | BOLT (5/16-18X0.625-IN) | |
| 34. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 35. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 36. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 37. | 5P-7854 | [2] | CLIP | |
| 38. | 6H-4005 | [1] | GROMMET | |
| 39. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 40. | 6V-1889 | [2] | CLIP (LOOP) | |
| 41. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 42. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 43. | 8C-3121 | [2] | BOLT (5/16-18X1.5-IN) | |
| 44. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 45. | 8T-4224 | [21] | WASHER-HARD (8.8X16X2-MM THK) | |
| 46. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 47. | 8T-5391 | [7] | BOLT (5/16-18X0.5-IN) | |
| 48. | 8T-8908 | [4] | BOLT (1/4-20X1-IN) | |
| 49. | 8T-9364 | [1] | BOLT (1/4-20X0.625-IN) | |
| 50. | 8T-9367 | [2] | BOLT (1/4-20X2-IN) | |
| 51. | 9G-9152 | [1] | CLIP | |
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51710253
472-6236: WIRING GP-CAB
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [11] | STRAP-CABLE | |
| 2. | 366-3999 Y | [1] | HARNESS AS-CAB | |
| 3. | 130-5300 | [2] | CLIP | |
| 4. | 5P-8167 | [2] | BOLT (3/8-16X0.625-IN) | |
| 5. | 116-0118 | [3] | CLIP | |
| 6. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 7. | 6D-2928 | [2] | BOLT (1/4-20X1.125-IN) | |
| 8. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 1S-1014 | [1] | GROMMET | |
| 10. | 224-3506 | [1] | PLATE-COVER | |
| 11. | 5M-3062 | [3] | BOLT (3/8-16X0.75-IN) | |
| 12. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 14. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 15. | 9X-3495 | [1] | CLIP AS | |
| 8C-3334 | [2] | RIVET-TUBULAR | ||
| 16. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 17. | 224-3507 | [1] | COVER AS | |
| 18. | 7X-3317 | [1] | SCREW-HEX SOCKET (5/16-18X0.87-IN) | |
| 19. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 5P-5901 | [1] | SEAL | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51710254
472-6238: WIRING GP-CAB
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT) | |
| 2. | 3E-6328 Y | [1] | ALARM GP (24-VOLT) | |
| 3. | 3S-2093 | [39] | STRAP-CABLE | |
| 4. | 9X-3495 | [1] | CLIP AS | |
| 5. | 116-0118 | [4] | CLIP | |
| 6. | 155-4211 Y | [1] | CONTROL & MTG GP-POWER TRAIN | |
| 7. | 156-8664 Y | [1] | RELAY GP (REVERSE ALARM) | |
| 8. | 156-8665 Y | [1] | RELAY GP (PARKING BRAKE) | |
| 9. | 186-9031 | [1] | WIRE AS | |
| 10. | 186-9588 Y | [1] | HARNESS AS-WIRING (NEUTRALIZER) | |
| 11. | 186-9596 | [1] | HARNESS AS-WIRING (SHIFT CONTROL) | |
| 12. | 186-9598 | [1] | WIRE AS | |
| 13. | 186-9693 | [1] | BRACKET AS | |
| 14. | 186-9694 | [1] | BRACKET AS | |
| 227-0217 | [1] | PAD | ||
| 15. | 224-2824 | [1] | CLAMP | |
| 16. | 224-2825 Y | [1] | HARNESS AS-WIRING (HORN RELAY) | |
| 17. | 237-4990 | [1] | HARNESS AS-POWER (ENCLOSURE) | |
| 18. | 237-5007 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 19. | 238-1357 | [1] | PLUG | |
| 169-0705 | [12] | SEAL | ||
| 20. | 316-2926 Y | [1] | SWITCH GP-MAGNETIC | |
| 21. | 338-6645 Y | [1] | HARNESS AS-CAB (PART B) | |
| 22. | 351-1132 | [1] | CONTROL AS-BRAKE | |
| 23. | 366-3996 Y | [1] | HARNESS AS-CAB (LOWER) | |
| 24. | 115-3072 | [1] | CLIP AS-CONNECTING (8-PIN) | |
| 8C-3334 | [1] | RIVET-TUBULAR | ||
| 25. | 124-2716 | [2] | SPACER (12.6X16X20-MM) | |
| 26. | 130-5300 | [15] | CLIP | |
| 27. | 1K-9007 | [1] | GROMMET | |
| 28. | 2D-2751 | [1] | GROMMET | |
| 29. | 2N-0402 | [4] | BOLT-SOCKET HEAD (10-24X1.75-IN) | |
| 30. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 31. | 4P-7581 | [5] | CLIP (LADDER) | |
| 32. | 5K-0906 | [8] | BOLT (5/16-18X0.625-IN) | |
| 33. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 34. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 35. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 36. | 5P-7854 | [2] | CLIP | |
| 37. | 6H-4005 | [1] | GROMMET | |
| 38. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 39. | 6V-1889 | [2] | CLIP (LOOP) | |
| 40. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 41. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 42. | 8C-3121 | [2] | BOLT (5/16-18X1.5-IN) | |
| 43. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 44. | 8T-4224 | [21] | WASHER-HARD (8.8X16X2-MM THK) | |
| 45. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 46. | 8T-5391 | [7] | BOLT (5/16-18X0.5-IN) | |
| 47. | 8T-8908 | [4] | BOLT (1/4-20X1-IN) | |
| 48. | 8T-9364 | [1] | BOLT (1/4-20X0.625-IN) | |
| 49. | 8T-9367 | [2] | BOLT (1/4-20X2-IN) | |
| 50. | 9G-9152 | [1] | CLIP | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51710255
246-3018: WIRING GP-COMMUNICATION
246-3018 WIRING GP-COMMUNICATION -EAME
S/N 9YZ1-UP
PART OF 318-7503 CONTROL AR-COMMUNICATION
AN ATTACHMENT
S/N 9YZ1-UP
PART OF 318-7503 CONTROL AR-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 246-3017 | [1] | HARNESS AS-CONTROL | |
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [132] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 213-1435 | [1] | RECEPTACLE AS (6-PIN) | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M) | |||
| 321-4628 E | SLEEVE (62-CM) | |||
| 8T-8730 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 2. | 4K-8864 | [1] | CLIP (LOOP) | |
| 3. | 130-5300 | [3] | CLIP | |
| 4. | 7C-8246 | [1] | SPACER (10.5X20X24-MM THK) | |
| 5. | 8T-9377 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP51710256
196-8902: WIRING GP-ELECTRONIC CONTROL
196-8902 WIRING GP-ELECTRONIC CONTROL
S/N 7ZR26407-UP
PART OF 363-7874 ENGINE AR-COMPLETE
S/N 7ZR26407-UP
PART OF 363-7874 ENGINE AR-COMPLETE
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 161-9927 Y | [1] | SENSOR GP-PRESSURE | ||
| 161-9930 Y | [1] | SENSOR GP-PRESSURE | ||
| 163-8530 Y | [1] | SENSOR GP-PRESSURE | ||
| 265-9033 Y | [1] | SENSOR GP-SPEED | ||
| 102-2240 Y | [2] | SENSOR GP-TEMPERATURE (3-PIN)(COOLANT) | ||
| 107-8618 | [1] | SENSOR GP-TEMPERATURE | ||
| 9X-0261 | [1] | ADAPTER | ||
| 6V-8214 M | [2] | BOLT (M6X1X20-MM) | ||
| 2V-3216 | [1] | CLIP (LOOP) | ||
| 4K-8864 | [2] | CLIP (LOOP) | ||
| 4P-8134 | [1] | CLIP (LADDER) | ||
| 8J-1256 | [1] | CLIP (LOOP) | ||
| 8M-2773 | [1] | CLIP (LOOP) | ||
| 3E-7448 | [1] | CONNECTOR | ||
| 3E-2332 | [1] | ELBOW | ||
| 206-5016 | [1] | HARNESS AS-ENGINE | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 102-8800 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 110-6846 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 129-1966 | [1] | GREASE-MULTIPURPOSE | ||
| 110-6844 | [1] | SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 8T-8737 | [24] | PLUG-SEAL | ||
| 9X-6772 | [1] | STRAP-CABLE | ||
| 9X-3402 | [51] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [51] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [27] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [27] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-5048 | [1] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 3S-2093 | [4] | STRAP-CABLE | ||
| 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51710257
278-1520: WIRING GP-ENGINE
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-8466 | [1] | BRACKET | |
| 2. | 186-9400 | [1] | BRACKET AS | |
| 3. | 316-2993 Y | [1] | SWITCH GP-MAGNETIC | |
| 4. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE) | |
| 4E-5724 | [2] | WASHER (7X12X1-MM THK) | ||
| 8T-0122 | [2] | NUT-FULL (1/4-28-THD) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 5. | 186-9697 | [2] | BUS BAR AS | |
| 6. | 5L-4507 | [4] | SCREW-MACHINE (10-32X0.875-IN) | |
| 7. | 4M-5281 | [1] | BOLT (1/4-20X0.75-IN) | |
| 8. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 10. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 14. | 8T-4896 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 6V-8801 | [7] | NUT (3/8-16-THD) | |
| 16. | 115-3072 | [1] | CLIP AS-CONNECTING (8-PIN) | |
| 17. | 4K-8864 | [1] | CLIP (LOOP) | |
| 18. | 186-9480 | [1] | HARNESS AS-POWER | |
| 321-4628 E | SLEEVE (40-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(10-CM) | |||
| 19. | 110-8213 | [1] | BRACKET AS | |
| 20. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 22. | 7X-0818 M | [3] | BOLT (M8X1.25X45-MM) | |
| 23. | 5P-7471 | [1] | CLIP (TAB) | |
| 24. | 5P-7470 | [1] | CLIP (SLOT) | |
| 25. | 5P-8182 | [1] | GROMMET (46-MM ID) | |
| 26. | 9X-6258 | [4] | SCREW-MACHINE (6-32X0.5-IN) | |
| 27. | 4B-5324 | [4] | WASHER (3.9X9.6X1.2-MM THK) | |
| 28. | 116-0118 | [16] | CLIP | |
| 29. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 30. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 31. | 4D-9517 | [1] | CLIP | |
| 32. | 4D-6565 | [1] | WIRE AS (6-GA) | |
| 33. | 4P-8134 | [4] | CLIP (LADDER) | |
| 34. | 3S-3216 | [1] | BRACKET | |
| 35. | 8T-9377 | [1] | BOLT (3/8-16X2.25-IN) | |
| 36. | 1K-4649 | [1] | SPACER (0.516X1X1-IN THK) | |
| 38. | 6V-1889 | [4] | CLIP (LOOP) | |
| 40. | 9U-2277 | [1] | CLIP AS | |
| 41. | 186-9600 | [1] | WIRE AS | |
| 42. | 278-1513 | [1] | WIRE AS | |
| 43. | 1W-8795 | [1] | BRACKET | |
| 44. | 227-6786 | [1] | HARNESS AS-ENGINE | |
| 6I-4348 | [1] | BOOT (40-PIN) | ||
| 115-5672 | [2] | BOOT | ||
| 8T-8729 | [70] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 222-8762 | [2] | PLUG AS-CONNECTOR | ||
| (EACH INCLUDES) | ||||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3E-6286 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-6287 | [1] | PLUG AS-CONNECTOR | ||
| (EACH PLUG AS INCLUDES) | ||||
| 110-6844 | [1] | SEAL | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [6] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [78] | PLUG-SEAL | ||
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [7] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [2] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 212-4342 | [1] | RECEPTACLE AS (12-PIN) | ||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL) | ||||
| 212-8436 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL) | ||||
| 321-4624 E | SLEEVE (20-CM) | |||
| 321-4625 E | SLEEVE (249-CM) | |||
| 321-4628 E | SLEEVE (28-CM) | |||
| 8T-8730 | [93] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(15-CM) | |||
| 47. | 4P-5820 Y | [1] | SENSOR GP-SPEED (ENGINE) | |
| 48. | 3S-2093 | [11] | STRAP-CABLE | |
| 49. | 4E-0718 | [1] | WIRE AS | |
| 50. | 033-8248 | [1] | CLIP (LOOP) | |
| 51. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 52. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 53. | 5P-7854 | [1] | CLIP | |
| 54. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 55. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 56. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 57. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE) | |
| 4E-5724 | [2] | WASHER (7X12X1-MM THK) | ||
| 8T-0122 | [2] | NUT-FULL (1/4-28-THD) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 58. | 6V-6609 | [1] | SEAL-O-RING | |
| 61. | 3E-2332 | [1] | ELBOW | |
| 62. | 6V-5048 | [2] | SEAL-O-RING | |
| 63. | 214-7568 | [2] | SEAL-O-RING | |
| 64. | 3K-0360 | [1] | SEAL-O-RING | |
| 66. | 8J-1256 | [1] | CLIP (LOOP) | |
| 67. | 3J-7354 | [1] | SEAL-O-RING | |
| 71. | 8L-2786 | [1] | SEAL-O-RING | |
| 72. | 2V-3216 | [1] | CLIP (LOOP) | |
| 73. | 9X-0261 | [1] | ADAPTER | |
| 74. | 234-5283 | [2] | PLUG AS-CONNECTOR | |
| (EACH INCLUDES) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 75. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 76. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 77. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 78. | 3E-4352 | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 79. | 9M-8406 | [1] | CLIP (LOOP) | |
| 80. | 8R-3600 | [1] | ANGLE | |
| 81. | 1H-3337 | [2] | BOLT (1/4-20X0.875-IN) | |
| 82. | 163-5807 | [1] | TIE-CABLE | |
| 83. | 265-9033 Y | [1] | SENSOR GP-SPEED (ENGINE TIMING) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51710258
237-4352: WIRING GP-FRONT
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-4349 | [1] | HARNESS AS-FRONT | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [12] | PLUG-SEAL | ||
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 212-8436 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 213-1435 | [1] | RECEPTACLE AS (6-PIN) | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 321-4624 E | SLEEVE (220-CM) | |||
| 321-4625 E | SLEEVE (130-CM) | |||
| 321-4628 E | SLEEVE (130-CM) | |||
| 8T-8730 | [41] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(10-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(20-CM) | |||
| 2. | 7K-6416 | [4] | GROMMET | |
| 3. | 8M-2772 | [3] | CLIP (LOOP) | |
| 4. | 237-4350 | [1] | HARNESS AS-FRONT LIGHTING | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 212-8436 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 321-4624 E | SLEEVE (50-CM) | |||
| 321-4625 E | SLEEVE (173-CM) | |||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM) | |||
| 5. | 3S-2093 B | [15] | STRAP-CABLE | |
| 6. | 9M-8406 | [1] | CLIP (LOOP) | |
| 7. | 237-4351 | [1] | HARNESS AS-LIGHTING | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 321-4624 E | SLEEVE (40-CM) | |||
| 321-4625 E | SLEEVE (155-CM) | |||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(15-CM) | |||
| 8. | 116-0118 | [9] | CLIP | |
| 9. | 5M-3062 | [9] | BOLT (3/8-16X0.75-IN) | |
| 10. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 130-5300 | [2] | CLIP | |
| 12. | 081-5930 | [1] | CABLE AS-CHASSIS | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 13. | 7G-7053 | [1] | GROMMET | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP51710259
237-4385: WIRING GP-REAR
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-4384 | [1] | HARNESS AS-SENSOR | |
| 6I-4348 | [1] | BOOT (40-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8737 | [36] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 321-4625 E | SLEEVE (190-CM) | |||
| 8T-8730 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 2. | 7K-1181 | [3] | STRAP-CABLE | |
| 3. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4. | 5M-3062 | [7] | BOLT (3/8-16X0.75-IN) | |
| 5. | 278-0940 | [1] | GROMMET | |
| 6. | 4D-7794 | [4] | CLIP | |
| 7. | 4K-8864 | [2] | CLIP (LOOP) | |
| 8. | 116-0118 | [1] | CLIP | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
