306-8544 WIRING GP-MONITOR -WORK AREA VISUAL SYSTEM S/N EEH1-UP; RAJ1-UP PART OF 303-2711 CAMERA AR, 357-7974 INSTALLATION AR AN ATTACHMENT 345D L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 306-8544 WIRING GP-
1. 306-8589 WIRING GP-
2. 291-7757 WIRING GP-
3. 291-7757 WIRING GP-
4. 291-7768 WIRING GP-
5. 299-2604 WIRING GP-
6. 283-2913 WIRING GP-
7. 230-0961 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

8. 227-6044 DRIVE GP-F
9. 227-6045 DRIVE GP-F
0. INFORMATION

EXCAVATOR 345D L EXCAVATOR EEH
345D L Excavator EEH00001-UP (MACHINE) POWERED BY C13 Engine SEBP5184 345D L EEH (2008)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

291-7758 WIRING GP-MEDIUM PRESSURE

306-8544 WIRING GP-MONITOR

306-8589 WIRING GP-MONITOR

291-7757 WIRING GP-PLATFORM

#SEBP51840400

306-8544: WIRING GP-MONITOR

WIRING GP-MONITOR

306-8544 WIRING GP-MONITOR -WORK AREA VISUAL SYSTEM
S/N EEH1-UP; RAJ1-UP
PART OF 303-2711 CAMERA AR, 357-7974 INSTALLATION AR
AN ATTACHMENT

i02848886 SEBP5184

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
1.	7K-1181	[10]	STRAP-CABLE
2.	306-8553	[1]	HARNESS AS-WIRING

#SEBP51840401

306-8589: WIRING GP-MONITOR

WIRING GP-MONITOR

306-8589 WIRING GP-MONITOR -WORK AREA VISUAL SYSTEM
S/N EEH1-UP; RAJ1-UP
PART OF 303-2633, 303-2765, 319-9155, 319-9156 CAMERA AR
AN ATTACHMENT

i02852060 SEBP5184

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[12]	STRAP-CABLE
2.	7K-1181	[15]	STRAP-CABLE
3.	306-8590	[1]	HARNESS AS-WIRING (WORK AREA VISUAL SYSTEM, REAR)

#SEBP51840402

291-7757: WIRING GP-PLATFORM

WIRING GP-PLATFORM

291-7757 WIRING GP-PLATFORM -SYSTEM 14, SYSTEM 17
S/N EEH1-UP; RAJ1-UP
PART OF 285-1786 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT

i02844990 SEBP5184

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[17]	STRAP-CABLE
2.	7I-2673	[3]	STRAP-CABLE
3.	7K-1181	[24]	STRAP-CABLE
4.	091-9035	[2]	SPACER (11X25X20-MM THK)
5.	111-4836	[4]	CLIP
6.	204-1611	[2]	STRAP (DUAL)
7.	204-1882	[1]	BRACKET AS
8.	319-1166	[1]	HARNESS AS-VALVE (ONE PUMP/TWO PUMP)
9.	132-5789	[1]	CLIP (LADDER)
10.	4P-7428	[2]	CLIP (LADDER)
11.	4P-7581	[8]	CLIP (LADDER)
12.	8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
14.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
15.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
	M		METRIC PART

#SEBP51840403

291-7757: WIRING GP-PLATFORM

WIRING GP-PLATFORM

291-7757 WIRING GP-PLATFORM -SYSTEM 14, SYSTEM 17
S/N EEH1-UP; RAJ1-UP
PART OF 285-1786 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT

i03874982 SEBP5184

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[18]	STRAP-CABLE
2.	7I-2673	[3]	STRAP-CABLE
3.	7K-1181	[26]	STRAP-CABLE
4.	091-9035	[2]	SPACER (11X25X20-MM THK)
5.	111-4836	[4]	CLIP
6.	204-1611	[2]	STRAP (DUAL)
7.	204-1882	[1]	BRACKET AS
8.	319-1166	[1]	HARNESS AS-VALVE (ONE PUMP/TWO PUMP)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[2]	STRAP-CABLE
	8T-8737	[23]	PLUG-SEAL
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
9.	132-5789 C	[3]	CLIP (LADDER)
10.	4P-7428	[2]	CLIP (LADDER)
11.	4P-7581 C	[7]	CLIP (LADDER)
12.	8T-4121 C	[14]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
14.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
15.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
16.	8T-4185 CM	[2]	BOLT (M10X1.5X50-MM)
17.	6G-2263 C	[2]	SPACER (10.5X19X28.5-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP51840404

291-7768: WIRING GP-PLATFORM

WIRING GP-PLATFORM

291-7768 WIRING GP-PLATFORM
S/N EEH1-UP; RAJ1-UP
PART OF 305-8000 OPERATOR AR

i02843858 SEBP5184

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[2]	STRAP-CABLE
3.	7G-1060	[1]	STRAP AS-GROUND
4.	7K-1181	[11]	STRAP-CABLE
5.	111-4837	[4]	CLIP
6.	111-4838	[2]	CLIP
7.	111-4839	[2]	STRAP
8.	116-0118	[11]	CLIP
9.	234-1122	[1]	COVER
10.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
11.	291-7806	[1]	HARNESS AS-PLATFORM
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[28]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[20]	STRAP-CABLE
	9X-0196	[1]	TERMINAL AS (16-GA)
	8T-8737	[49]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[16]	TERMINAL (FEMALE)
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[43]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[34]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM)
	9X-3402	[55]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[55]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	197-4385	[3]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[7]	TERMINAL (MALE)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[4]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
16.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP51840405

299-2604: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

299-2604 WIRING GP-QUICK COUPLER
S/N EEH1-UP; RAJ1-UP
PART OF 302-9403 CONTROL AR-COUPLER
AN ATTACHMENT

i02903632 SEBP5184

2992604 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7I-2673	[1]	STRAP-CABLE
3.	7K-1181	[23]	STRAP-CABLE
4.	299-2643	[1]	HARNESS AS-SOLENOID
5.	4P-7428	[1]	CLIP (LADDER)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP51840406

283-2913: WIRING GP-RADIO

WIRING GP-RADIO

283-2913 WIRING GP-RADIO
S/N EEH1-UP; RAJ1-UP
12-VOLT
CANNOT BE USED WITH @@@@@251-0538@@@@@, @@@@@303-2702@@@@@, @@@@@302-9403@@@@@
AN ATTACHMENT

i02724420 SEBP5184

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	149-5050	[4]	RELAY (24-VOLT)(SPEAKERS)
6.	170-2512 Y	[1]	SWITCH GP-TOGGLE (12-VOLT, 24-VOLT SPEAKER)
7.	267-7676	[1]	BRACKET AS
8.	267-7695	[1]	BRACKET AS
9.	283-2914	[1]	HARNESS AS-RADIO
	8T-8737	[9]	PLUG-SEAL
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[12]	TERMINAL-BLADE (16-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 20-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[25]	STRAP-CABLE
	149-5051	[4]	CONNECTOR-RECEPTACLE
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
10.	283-2984	[1]	COVER
11.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
12.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP51840407

230-0961: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1082-UP; MHX4389-UP
PART OF 267-0009, 317-9990, 356-2433 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02056539 SEBP5184

2300961 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	7E-6508	[6]	CAP AS
2.	418-7614 Y	[1]	HARNESS AS-WIRING (UNIT INJECTOR)
3.	6V-8837 M	[5]	BOLT (M6X1X16-MM)
4.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
5.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
6.	237-9960	[5]	CLIP (LADDER)
7.	3S-2093	[5]	STRAP-CABLE
8.	5P-0537	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP51840408

227-6044: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N EEH1-UP; RAJ1-UP
PART OF 353-0500 DRIVE GP-FINAL, 227-6042, 227-6043 POWER TRAIN AR

i02488618 SEBP5184

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	225-4504 CY	[1]	MOTOR & MTG GP-TRAVEL
2.	227-6045 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP51840409

227-6045: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N EEH1-UP; RAJ1-UP
PART OF 227-6044 DRIVE GP-FINAL

i02161077 SEBP5184

For full view, you need register

Parts for your 345D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	2R-0524	[2]	CONE-BEARING
2.	2R-0525	[2]	CUP-BEARING
3.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
4.	7M-8485	[2]	SEAL-O-RING
5.	7Y-0661	[3]	SHAFT-PLANETARY
6.	7Y-0662	[4]	SHAFT-PLANETARY
7.	199-4583	[11]	BEARING AS
8.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
9.	7Y-1469	[1]	COUPLING
10.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
11.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
12.	7Y-1473 B	[1]	SHIM (0.3-MM THK)
13.	7Y-1474 B	[1]	SHIM (0.4-MM THK)
14.	7Y-1475 B	[1]	SHIM (0.5-MM THK)
15.	7Y-1476 B	[1]	SHIM (0.6-MM THK)
16.	7Y-1477 B	[1]	SHIM (0.7-MM THK)
17.	7Y-1478 B	[1]	SHIM (0.8-MM THK)
18.	7Y-1479 B	[1]	SHIM (1-MM THK)
19.	7Y-1480 B	[1]	SHIM (1.6-MM THK)
20.	7Y-1482	[1]	CARRIER-PLANETARY
21.	7Y-1483	[1]	GEAR-RING (63-TEETH)
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1487	[1]	GEAR-RING (85-TEETH)
24.	7Y-1488	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
25.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
26.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
27.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
28.	7Y-1498	[1]	COVER
29.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
30.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
31.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
32.	110-7217	[2]	RING-RETAINING
33.	114-1541	[6]	PIN-DOWEL
34.	169-5559	[1]	GEAR-SUN (26-TEETH)
35.	199-4719	[1]	GEAR-COUPLING
36.	200-3489	[1]	HOUSING-MOTOR
37.	200-3490	[1]	HOUSING-GEAR
38.	205-9025	[1]	SEAL GP-DUO-CONE
	205-9024	[2]	RING-TORIC
39.	227-6048	[12]	WASHER (26X40X4-MM THK)
40.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
41.	199-4582	[3]	BEARING AS
42.	095-0891	[7]	PIN-SPRING
43.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
44.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
45.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
46.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
47.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
48.	8C-5240	[1]	SEAL-O-RING
49.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
50.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
51.	8T-4240	[3]	RING-RETAINING
52.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
345D and 349D Excavators

Battery or Battery Cable - Inspect/Replace
345D and 349D Excavators

Battery - Recycle
345D and 349D Excavators

SmartBoom Operation - If Equipped
345D and 349D Excavators

SmartBoom Control - If Equipped
345D and 349D Excavators

Power Receptacle - If Equipped
345D and 349D Excavators

Camera Harness - Disconnect and Connect
345D and 349D Excavators

Fuses - Replace
345D and 349D Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for the 291-7757 Platform Wiring Gp {1408}
Installation Procedure for the 291-7757 Platform Wiring Gp {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

Installation of the 291-7758 Medium Pressure Wiring {1408}
Installation of the 291-7758 Medium Pressure Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure of 259-4889 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Installation Procedure of 259-4889 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}

Installation Procedure for 336-6188 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for 336-6188 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408}

Installation Procedure for the <NOBR>456-4107</NOBR> Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the 456-4107 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}

Installation Procedure for the 460-5489 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 7332, 7405, 7557}
Installation Procedure for the 460-5489 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 7332, 7405, 7557}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Relays
345D, 349D and 349D2 Excavators Tool Control System

Senders
345D, 349D and 349D2 Excavators Tool Control System

Sensors
345D, 349D and 349D2 Excavators Tool Control System

Switches
345D, 349D and 349D2 Excavators Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System

System Schematic
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Connector Contact Description
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Electrical Connector - Inspect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Component and Connector Locations
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CAN Data Link - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/08/10

Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2009/06/01

The Connector for the Chassis Harness and the Platform Harness Should Be Tightened to the Specified Torque on Certain Excavators {1408}
2009/08/03

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12