ELECTRICAL AND STARTING SYSTEM
SENSOR GPHYDRAULIC SYSTEM
LINES GP-STICKLINES GP-CYLINDER
LINES GP-SWING
LINES GP-TRAVEL MOTOR
ELECTRICAL AND STARTING SYSTEM
SENSOR GP#SEBP51840790
239-1607: LINES GP-SENSOR
239-1607 LINES GP-SENSOR -OVERLOAD WARNING
S/N EEH1-UP; RAJ1-UP
PART OF 294-1277 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N EEH1-UP; RAJ1-UP
PART OF 294-1277 CONTROL AR-AUXILIARY
AN ATTACHMENT
Parts for your 345D L EXCAVATOR:
#SEBP51840791
128-7448: LINES GP-STICK
128-7448 LINES GP-STICK
S/N EEH1-UP; RAJ1-UP
PART OF 220-2498 STICK AR-HOE
FOR USE WITH 3-M (9.8-FT) STICK
AN ATTACHMENT
S/N EEH1-UP; RAJ1-UP
PART OF 220-2498 STICK AR-HOE
FOR USE WITH 3-M (9.8-FT) STICK
AN ATTACHMENT
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 354-3802 I | [2] | HOSE AS | |
| 2. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 4. | 1P-3703 | [5] | SEAL-RECTANGULAR | |
| 5. | 6V-0400 | [8] | FLANGE-HALF | |
| 6. | 134-6793 | [1] | BLOCK | |
| 7. | 8T-5412 M | [4] | BOLT (M12X1.75X140-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP51840792
128-7449: LINES GP-STICK
128-7449 LINES GP-STICK
S/N EEH1-UP; RAJ1-UP
PART OF 220-2500 STICK AR-HOE
FOR USE WITH 2.5-M (8.2-FT) STICK
AN ATTACHMENT
S/N EEH1-UP; RAJ1-UP
PART OF 220-2500 STICK AR-HOE
FOR USE WITH 2.5-M (8.2-FT) STICK
AN ATTACHMENT
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 212-5326 I | [2] | HOSE AS | |
| 2. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 4. | 1P-3703 | [5] | SEAL-RECTANGULAR | |
| 5. | 6V-0400 | [8] | FLANGE-HALF | |
| 6. | 275-1410 | [1] | BLOCK | |
| 7. | 8T-5412 M | [4] | BOLT (M12X1.75X140-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP51840793
245-4931: LINES GP-STICK
245-4931 LINES GP-STICK
S/N EEH1-UP; RAJ1-UP
PART OF 294-1255 STICK AR-HOE
FOR USE WITH 4.3-M (14.1-FT) STICK
AN ATTACHMENT
S/N EEH1-UP; RAJ1-UP
PART OF 294-1255 STICK AR-HOE
FOR USE WITH 4.3-M (14.1-FT) STICK
AN ATTACHMENT
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-6046 | [1] | BLOCK | |
| 2. | 354-3807 I | [2] | HOSE AS | |
| 3. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 4. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 5. | 1P-5767 | [4] | FLANGE-HALF | |
| 6. | 6V-0400 | [4] | FLANGE-HALF | |
| 7. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 8. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8T-5041 M | [4] | BOLT (M12X1.75X120-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP51840794
289-5758: LINES GP-STICK
289-5758 LINES GP-STICK
S/N EEH1-UP; RAJ1-UP
PART OF 294-1258, 294-1267 STICK AR-HOE
FOR USE WITH 3.4-M (11.2-FT) STICK
AN ATTACHMENT
S/N EEH1-UP; RAJ1-UP
PART OF 294-1258, 294-1267 STICK AR-HOE
FOR USE WITH 3.4-M (11.2-FT) STICK
AN ATTACHMENT
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-6046 | [1] | BLOCK | |
| 2. | 354-3810 I | [2] | HOSE AS | |
| 3. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 4. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 5. | 1P-5767 | [4] | FLANGE-HALF | |
| 6. | 6V-0400 | [4] | FLANGE-HALF | |
| 7. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 8. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8T-5041 M | [4] | BOLT (M12X1.75X120-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP51840795
289-5759: LINES GP-STICK
289-5759 LINES GP-STICK
S/N EEH1-UP; RAJ1-UP
PART OF 294-1257, 294-1265 STICK AR-HOE
FOR USE WITH 3.9-M (12.8-FT) STICK
AN ATTACHMENT
S/N EEH1-UP; RAJ1-UP
PART OF 294-1257, 294-1265 STICK AR-HOE
FOR USE WITH 3.9-M (12.8-FT) STICK
AN ATTACHMENT
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0400 | [4] | FLANGE-HALF | |
| 2. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 3. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 5. | 4I-6130 I | [2] | HOSE AS | |
| 6. | 1P-5767 | [4] | FLANGE-HALF | |
| 7. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 8. | 4I-6046 | [1] | BLOCK | |
| 9. | 8T-5041 M | [4] | BOLT (M12X1.75X120-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP51840796
129-5973: LINES GP-STICK CYLINDER
129-5973 LINES GP-STICK CYLINDER
S/N EEH1-UP; RAJ1-UP
PART OF 225-4524, 358-8458 CYLINDER & LINES GP-STICK
AN ATTACHMENT
S/N EEH1-UP; RAJ1-UP
PART OF 225-4524, 358-8458 CYLINDER & LINES GP-STICK
AN ATTACHMENT
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-6844 | [1] | TUBE AS | |
| 2. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 3. | 7Y-7992 M | [4] | BOLT (M12X1.75X75-MM) | |
| 4. | 462-3576 | [2] | SUPPORT AS | |
| 5. | 124-0909 | [4] | CLIP | |
| 6. | 3E-4356 | [4] | WASHER-HARD (17.5X30X6-MM THK) | |
| 7. | 447-1707 M | [4] | BOLT (M16X2X60-MM) | |
| 8. | 453-3454 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 457-5821 M | [8] | BOLT (M10X1.5X35-MM) | |
| 10. | 462-3574 | [2] | SUPPORT AS | |
| 11. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
#SEBP51840797
302-9546: LINES GP-STICK CYLINDER
302-9546 LINES GP-STICK CYLINDER -LOAD CONTROL
S/N EEH1-UP; RAJ1-UP
PART OF 297-0257, 297-0258 VALVE AR-CHECK & RELIEF
AN ATTACHMENT
S/N EEH1-UP; RAJ1-UP
PART OF 297-0257, 297-0258 VALVE AR-CHECK & RELIEF
AN ATTACHMENT
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4140 M | [6] | BOLT (M16X2X60-MM) | |
| 2. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 3. | 8T-4196 M | [8] | BOLT (M10X1.5X35-MM) | |
| 4. | 8T-6868 M | [4] | BOLT (M12X1.75X80-MM) | |
| 5. | 108-1782 M | [4] | BOLT-SOCKET HEAD (M12X1.75X90-MM) | |
| 6. | 093-1294 | [2] | CLAMP | |
| 7. | 216-6515 | [4] | CLIP | |
| 8. | 148-8328 | [1] | CONNECTOR AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8633 | [1] | CONNECTOR | ||
| 9. | 148-8368 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8627 | [1] | ELBOW | ||
| 10. | 302-9548 | [1] | TUBE AS | |
| 11. | 302-9550 | [1] | TUBE AS | |
| 12. | 302-9552 | [1] | TUBE AS | |
| 13. | 6V-8397 | [2] | SEAL-O-RING | |
| 14. | 6V-8398 | [1] | SEAL-O-RING | |
| 15. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 16. | 124-1216 | [2] | SUPPORT AS | |
| 17. | 237-3231 | [2] | SUPPORT AS | |
| 18. | 302-9547 | [1] | TUBE AS | |
| 19. | 285-1768 Y | [1] | VALVE GP-LOAD CONTROL (STICK CYLINDER) | |
| 20. | 3E-4356 | [6] | WASHER-HARD (17.5X30X6-MM THK) | |
| 21. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51840798
292-7162: LINES GP-SWING MOTOR
292-7162 LINES GP-SWING MOTOR -WITH FINE SWING
S/N EEH1-UP; RAJ1-UP
PART OF 297-0243, 297-0244 HYDRAULIC AR
S/N EEH1-UP; RAJ1-UP
PART OF 297-0243, 297-0244 HYDRAULIC AR
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 087-5767 I | [1] | HOSE AS | |
| 2. | 126-2132 | [1] | BLOCK AS | |
| 3. | 176-4774 I | [1] | HOSE AS | |
| 4. | 194-0383 I | [1] | HOSE AS | |
| 5. | 245-5061 I | [1] | HOSE AS | |
| 6. | 269-9684 I | [1] | HOSE AS | |
| 7. | 295-9423 Y | [1] | VALVE GP-SWING CUSHION (FINE SWING) | |
| 8. | 319-9775 I | [1] | HOSE AS | |
| 9. | 148-8324 | [1] | CONNECTOR AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 6V-9874 | [1] | CONNECTOR (STRAIGHT) | ||
| 10. | 148-8336 | [1] | CONNECTOR AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8636 | [1] | CONNECTOR | ||
| 11. | 148-8347 | [3] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9007 | [1] | ELBOW | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 12. | 148-8359 | [1] | ELBOW AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 6V-9877 | [1] | ELBOW | ||
| 13. | 148-8431 | [2] | TEE AS | |
| (EACH INCLUDES) | ||||
| 5K-9090 | [2] | SEAL-O-RING | ||
| 6V-8785 | [1] | TEE | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 14. | 148-8435 | [1] | TEE AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-8781 | [1] | TEE | ||
| 15. | 148-8449 | [1] | TEE AS-SWIVEL | |
| 6V-9746 | [2] | SEAL-O-RING | ||
| 6V-9839 | [1] | TEE-SWIVEL | ||
| 16. | 153-6236 | [1] | REDUCER AS | |
| 6V-8946 | [1] | REDUCER | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 17. | 8T-4178 M | [12] | BOLT (M10X1.5X90-MM) | |
| 18. | 148-8327 | [1] | CONNECTOR AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8637 | [1] | CONNECTOR | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP51840799
302-3185: LINES GP-TRAVEL MOTOR
302-3185 LINES GP-TRAVEL MOTOR -LONG UNDERCARRIAGE
S/N EEH1-221
PART OF 297-0243 HYDRAULIC AR
S/N EEH1-221
PART OF 297-0243 HYDRAULIC AR
Parts for your 345D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [6] | STRAP-CABLE | |
| 2. | 108-7118 | [2] | GROMMET | |
| 3. | 113-6741 I | [2] | HOSE AS | |
| 4. | 129-5947 | [2] | GROMMET | |
| 5. | 148-8347 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9007 | [1] | ELBOW | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 6. | 165-5085 M | [12] | BOLT-SOCKET HEAD (M12X1.75X160-MM) | |
| 7. | 225-4547 Y | [1] | SWIVEL GP | |
| 8. | 227-0727 I | [2] | HOSE AS | |
| 9. | 325-8851 I | [4] | HOSE AS | |
| 10. | 266-7843 Y | [2] | VALVE GP-TRAVEL COUNTERBALANCE (TRACTION CONTROL) | |
| 11. | 285-2520 | [1] | CONNECTOR AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 236-2839 | [1] | CONNECTOR AS | ||
| 12. | 148-8336 | [1] | CONNECTOR AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8636 | [1] | CONNECTOR | ||
| 13. | 148-8338 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 8T-0075 | [1] | CONNECTOR | ||
| 14. | 148-8378 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 15. | 148-8392 | [1] | ELBOW AS | |
| 6V-9746 | [1] | SEAL-O-RING | ||
| 6V-9853 | [1] | ELBOW | ||
| 16. | 153-6259 | [1] | TEE AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8777 | [1] | TEE-FACE SEAL | ||
| 6V-9746 | [2] | SEAL-O-RING | ||
| 17. | 1P-3703 | [4] | SEAL-RECTANGULAR | |
| 18. | 1P-3704 | [4] | SEAL-RECTANGULAR | |
| 19. | 1P-5767 | [8] | FLANGE-HALF | |
| 20. | 5K-9090 | [1] | SEAL-O-RING | |
| 21. | 6V-0400 | [16] | FLANGE-HALF | |
| 22. | 6V-9746 | [1] | SEAL-O-RING | |
| 23. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 25. | 8T-4184 M | [48] | BOLT (M12X1.75X45-MM) | |
| 27. | 8T-4223 | [48] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 9X-2235 | [1] | TEE-SWIVEL | |
| 29. | 1U-8846 B | SEALANT-GASKET | ||
| B | USE AS REQUIRED | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Failure Of Water In Fuel Separator (WIF) Sensor On Certain CAT Products{1263, 1439}
Failure Of Water In Fuel Separator (WIF) Sensor On Certain CAT Products{1263, 1439}
Failure Of Water In Fuel Separator (WIF) Sensor On Certain CAT Products{1263, 1439}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Specifications
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
Service Letter-Asia
Systems Operation
Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
Testing and Adjusting
Angle Sensor - Calibrate - AS300/AS450 System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Excavator Arm Sensors - Calibrate - PSC System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Troubleshooting
CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0261 FMI 13 Engine Timing Calibration required
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
MID 039 - CID 0041 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0190 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0262 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1130 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1960 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1968 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1968 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1968 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1969 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1969 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1969 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2265 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2265 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2265 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2266 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2266 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2266 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 3012 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 3012 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 3012 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1130 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1130 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1609 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1609 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1609 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Disassembly and Assembly
Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Improved Fuel Level Sender As Is Now Used on Certain Cat<SUP>®</SUP> Products {1273, 7481}
2012/10/08
2012/10/08
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
New Liquid Level Sensor Gp Is Now Used as Service Replacement on Certain Cat Products {1263, 7422}
2015/08/18
2015/08/18
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Caterpillar Parts SIS Catalog 345D L :
Truck sale:
57,000
Caterpillar 345DL, Crawler Excavators, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC
- Crawler Excavators
MACALLISTER MACHINERY CO., INC


