AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

327-7199 ENGINE AR-PRIMARY S/N GDC1-UP PART OF 327-7195, 327-7267 ENGINE AR AN ATTACHMENT 320D EXCAVATOR


ENGINE ARRANGEMENT
ENGINE AR
BASIC ENGINE
CAMSHAFT GP
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP

EXCAVATOR 320D EXCAVATOR JFZ
 320D & 320D L Excavators JFZ00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP5217 320D JFZ   (2007)

ENGINE ARRANGEMENT

ENGINE AR
327-7289 ENGINE AR-COMPLETE
272-4683 ENGINE AR-CORE
327-7199 ENGINE AR-PRIMARY
272-4742 INSTALLATION AR-ENGINE
 

#SEBP52170030
 

327-7199: ENGINE AR-PRIMARY

327-7199 ENGINE AR-PRIMARY
S/N GDC1-UP
PART OF 327-7195, 327-7267 ENGINE AR
AN ATTACHMENT
i04040263 SEBP5217
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  296-4654 Y [1] ADAPTER GP-REMOTE OIL FILTER  
  296-4638 Y [1] BREATHER GP (CRANKCASE)  
  305-4744 Y [1] CAMSHAFT GP  
  296-4664 Y [1] CONTROL & MTG GP-ENGINE ELEK  
  296-4642 Y [1] COOLER GP-ENGINE OIL  
  296-4647 Y [1] COVER GP-VALVE MECHANISM  
  296-4650 Y [1] CRANKSHAFT GP  
  296-4648 Y [1] CYLINDER BLOCK GP  
  296-4645 Y [1] CYLINDER HEAD GP  
  305-4745 Y [1] FILTER GP-FUEL  
    -OR-
  327-7227 Y [1] FILTER GP-FUEL  
  296-4644 Y [1] FLYWHEEL GP  
  296-4651 Y [1] GEAR GP-FRONT  
  296-4658 Y [1] HOUSING & REGULATOR GP  
  296-4643 Y [1] HOUSING GP-FLYWHEEL  
  296-4649 Y [1] HOUSING GP-FRONT  
  310-9607 Y [1] INJECTOR GP-FUEL  
  296-4641 Y [1] LINES GP-ENGINE OIL  
  296-4656 Y [1] LINES GP-FUEL  
  296-4636 Y [1] LINES GP-TURBOCHARGER OIL  
  296-4653 Y [1] MANIFOLD GP-EXHAUST  
  324-4194 Y [1] MANIFOLD GP-INLET  
    -OR-
  327-7249 Y [1] MANIFOLD GP-INLET  
  296-4661 Y [1] MOUNTING GP-ALTERNATOR  
  305-4678 Y [1] MOUNTING GP-PUMP  
  296-4637 Y [1] MOUNTING GP-STARTING MOTOR  
  324-4173 Y [1] MUFFLER GP  
  296-4640 Y [1] PAN GP-OIL (ENGINE)  
    -OR-
  327-7228 Y [1] PAN GP-OIL  
  296-4659 Y [1] PISTON & ROD GP  
  296-4655 Y [1] PUMP GP-WATER  
  296-4666 Y [1] SENSOR GP-ENGINE  
  310-9617 Y [1] TURBOCHARGER GP  
  305-4910 Y [1] VALVE MECHANISM GP  
  296-4665 Y [1] WIRING GP-ELECTRONIC CONTROL  
  299-1419 [1] ELECTRONICS GP-ENGINE RATINGS  
   
    AVAILABLE GASKET KIT(S):
  310-9545 Y [1] KIT-GASKET  
  310-9552 [1] KIT-SEAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170031
 

272-4742: INSTALLATION AR-ENGINE

272-4742 INSTALLATION AR-ENGINE
S/N MGG1-UP; JFZ1-UP
PART OF 264-8626, 264-8627 GENERAL AR
i02976184 SEBP5217
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  109-9313 Y [1] AIR CLEANER & MOUNTING GP  
  239-6507 Y [1] COMPRESSOR GP-REFRIGERANT  
  259-7184 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  279-7911 Y [1] FILTER & MTG GP-ENGINE OIL  
  272-4744 Y [1] LINES GP-AIR (AIR CLEANER TO TURBOCHARGER)  
  265-3504 Y [1] LINES GP-AIR  
  162-6185 Y [1] LINES GP-ENGINE OIL DRAIN  
    S/N JFZ1-807; MGG1-398
  310-9582 Y [1] LINES GP-ENGINE OIL DRAIN  
    S/N JFZ808-UP; MGG399-UP
  287-0183 Y [1] LINES GP-MUFFLER DRAIN  
  266-6297 Y [1] MOUNTING GP-ENGINE  
  297-7671 Y [1] MOUNTING GP-FUEL FILTER  
  265-3616 Y [1] RADIATOR & HYD OIL COOLER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170032
 

296-4639: CAMSHAFT GP

296-4639 CAMSHAFT GP
S/N GDC1-162
PART OF 272-4683 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02738692 SEBP5217
2964639 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-1715 [1] CAMSHAFT  
2. 279-7859 [12] TAPPET  
3. 294-1716 [12] PUSHROD  
4. 094-4628 [1] KEY (CRANKSHAFT)  
5. 5I-7650 [1] PLATE  
6. 6V-5215 M [2] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
 

#SEBP52170033
 

305-4744: CAMSHAFT GP

305-4744 CAMSHAFT GP
S/N GDC163-UP
PART OF 272-4683 ENGINE AR-CORE, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02739579 SEBP5217
3054744 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-4756 [1] CAMSHAFT  
2. 324-4060 [12] TAPPET  
3. 294-1716 [12] PUSHROD  
4. 094-4628 [1] KEY  
5. 5I-7650 [1] PLATE  
6. 6V-5215 M [2] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP52170034
 

296-4647: COVER GP-VALVE MECHANISM

296-4647 COVER GP-VALVE MECHANISM
S/N GDC1-UP
PART OF 272-4683 ENGINE AR-CORE, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02738683 SEBP5217
2964647 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-1703 [1] COVER-ROCKER  
2. 324-4220 [1] COVER-ROCKER  
3. 294-1705 [1] GASKET  
4. 294-1706 [1] GASKET (VALVE COVER)  
5. 324-4221 [1] COVER  
6. 294-1708 [1] CAP (ENGINE OIL FILLER)  
7. 294-1709 [1] BRACKET  
8. 294-1710 [8] BOLT (M6X1X16.2-MM)  
9. 294-1711 [16] WASHER  
10. 096-8569 [2] BOLT (140-MM LG)  
11. 294-1712 [1] SEAL  
12. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
13. 294-1713 [16] BOLT (M8X1.25X38.3-MM)  
14. 294-1700 [16] BOLT (M8X1.25X108.3-MM)  
15. 095-8799 [7] BOLT (M8X1.25X30.5-MM)  
16. 294-1714 [2] STUD  
17. 294-1821 [2] BOLT (M8X1.25X35.5-MM)  
 

#SEBP52170035
 

296-4650: CRANKSHAFT GP

296-4650 CRANKSHAFT GP
S/N GDC1-UP
PART OF 272-4683 ENGINE AR-CORE, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02738688 SEBP5217
2964650 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-1749 [1] CRANKSHAFT AS  
1A. 085-9513 [2] PIN  
1B. 094-4628 [2] KEY (CRANKSHAFT)  
1C. 130-7596 [1] NUT  
1D. 294-1751 [1] GEAR (31-TEETH)  
2. 233-1277 [1] PLATE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP52170036
 

294-1725: CYLINDER BLOCK GP

294-1725 CYLINDER BLOCK GP
S/N GDC1-UP
PART OF 296-4648 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
i02763695 SEBP5217
2941725 CYLINDER BLOCK GP Parts scheme 2941725 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7505 [12] PLUG  
2. 5I-7523 [6] SLEEVE  
3. 094-9424 [12] GASKET  
4. 139-7814 [6] VALVE  
5. 5I-8009 [1] BUSHING  
6. 5I-7528 [2] BUSHING  
7. 5I-7529 [1] BUSHING  
8. 3P-1896 [14] PLUG-CUP  
9. 094-7741 M [14] BOLT-BEARING CAP (M14X2X120-MM)  
10. 095-2005 [2] CAP  
11. 096-3741 [7] CAP  
12. 294-1720 [2] SEAL  
13. 294-1722 [6] JET  
14. 5I-7525 [1] PLUG  
15. 195-8212 [1] PLUG  
16. 294-1721 [1] SHAFT  
17. 5I-7724 [2] PIN  
18. 095-2039 [1] WASHER-SPECIAL  
19. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
20. 4I-9664 [2] PIN  
21. 099-4420 [2] PIN  
22. 183-5916 [6] PIN-SPRING  
  M   METRIC PART
 

#SEBP52170037
 

296-4648: CYLINDER BLOCK GP

296-4648 CYLINDER BLOCK GP
S/N GDC1-UP
PART OF 272-4683 ENGINE AR-CORE, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02738697 SEBP5217
2964648 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 324-4175 [1] EYE  
2. 294-1724 [1] EYE  
3. 5I-5181 [2] BOLT  
4. 096-2501 [4] LOCKWASHER  
5. 099-4483 M [2] BOLT (M12X1.25X30-MM)  
6. 5I-7654 [3] PLATE (STANDARD)  
  5I-7787 AB PLATE (0.15-MM OS)  
  5I-7788 AB PLATE (0.3-MM OS)  
  5I-7789 AB PLATE (0.45-MM OS)  
7. 5I-7588 [7] SET-BEARING (STANDARD)  
  5I-7784 AB SET-BEARING (0.25-MM US)  
  5I-7785 AB SET-BEARING (0.5-MM US)  
  5I-7786 AB SET-BEARING (0.75-MM US)  
8. 294-1725 Y [1] CYLINDER BLOCK GP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170038
 

297-7644: CYLINDER HEAD AS

297-7644 CYLINDER HEAD AS
S/N GDC1-UP
PART OF 296-4645 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i02738802 SEBP5217
2977644 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-9664 [2] PIN  
2. 294-1679 [12] SEAT  
3. 294-1680 [12] SEAT  
4. 294-1678 [24] GUIDE  
5. 103-9011 [13] CAP-SEALING  
6. 5I-4915 [9] CAP  
 

#SEBP52170039
 

296-4645: CYLINDER HEAD GP

296-4645 CYLINDER HEAD GP
S/N GDC1-UP
PART OF 272-4683 ENGINE AR-CORE, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02738695 SEBP5217
2964645 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 297-7644 Y [1] CYLINDER HEAD AS  
2. 4I-9664 [2] PIN  
3. 294-1682 [1] GASKET  
4. 294-1683 [26] BOLT  
5. 310-9532 [12] GUIDE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Testing and Adjusting
Engine Speed - Check
C4.2 and C6.4 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 320D :

272-4683 ENGINE AR-CORE
327-7289 ENGINE AR-COMPLETE
324-3971 ENGINE AR-COMPLETE
324-3969 ENGINE AR-COMPLETE
324-3965 ENGINE AR-COMPLETE
310-9484 ENGINE AR-COMPLETE
296-4680 ENGINE AR-COMPLETE
272-4682 ENGINE AR-COMPLETE
272-4742 INSTALLATION AR-ENGINE
CAMSHAFT GP
296-4639 CAMSHAFT GP
CAMSHAFT GP
305-4744 CAMSHAFT GP
COVER GP-VALVE MECHANISM
296-4647 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
296-4650 CRANKSHAFT GP
CYLINDER BLOCK GP
294-1725 CYLINDER BLOCK GP
CYLINDER BLOCK GP
296-4648 CYLINDER BLOCK GP
CYLINDER HEAD AS
297-7644 CYLINDER HEAD AS

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.