AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

275-7003 WIRING GP-PLATFORM S/N MGG1-UP; JFZ1-UP PART OF 273-5387, 327-6568 OPERATOR AR 320D EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 320D EXCAVATOR JFZ
 320D & 320D L Excavators JFZ00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP5217 320D JFZ   (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FINE SWING
259-5052 WIRING GP-FINE SWING
WIRING GP-HEATER
306-8690 WIRING GP-HEATER
WIRING GP-PLATFORM
275-7003 WIRING GP-PLATFORM
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
 

#SEBP52170240
 

275-7003: WIRING GP-PLATFORM

275-7003 WIRING GP-PLATFORM
S/N MGG1-UP; JFZ1-UP
PART OF 273-5387, 327-6568 OPERATOR AR
i02744447 SEBP5217
2757003 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [16] STRAP-CABLE  
4. 111-4836 [4] CLIP  
5. 111-4838 [2] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [14] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 275-7004 [1] HARNESS AS-PLATFORM  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [28] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [22] STRAP-CABLE  
  8T-8737 [58] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [15] TERMINAL (FEMALE)  
  9W-0852 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [35] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [32] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM)  
  9X-3402 [65] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [65] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8050 [2] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [2] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  2L-8052 [2] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [2] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [25] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [25] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  155-2270 [12] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [3] DIODE  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
    (EACH INCLUDES)
  264-7032 [1] SEAL-CONNECTOR  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [6] TERMINAL (MALE)  
  239-7352 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [4] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
11. 095-0728 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 3E-5169 [1] GUARD-SWITCH  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP52170241
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N MGG1-UP; JFZ1-UP
PART OF 264-8770 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT
i02535649 SEBP5217
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 238-1593 [1] WIRE AS  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170242
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N MGG1-UP; JFZ1-UP
PART OF 264-8770 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT
i03161283 SEBP5217
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170243
 

227-6035: DRIVE GP-FINAL

227-6035 DRIVE GP-FINAL
S/N MGG1-1689; JFZ1-6246
WITHOUT MOTOR
PART OF 227-6913 DRIVE GP-FINAL
i01892425 SEBP5217
2276035 DRIVE GP-FINAL Parts scheme 2276035 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
2. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
11. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
12. 7Y-0223 [3] SHAFT-PLANETARY  
13. 094-1542 [6] BEARING-ROLLER  
14. 7Y-1431 [3] GEAR-PLANETARY (30-TEETH)  
15. 094-1528 [6] WASHER (53X84X1-MM THK)  
16. 095-0891 [6] PIN-SPRING  
17. 6I-6585 [3] GEAR-PLANETARY (44-TEETH)  
18. 094-0616 [3] BEARING AS-ROLLER  
19. 3E-2338 [2] PLUG-PIPE  
20. 7M-8485 [2] SEAL-O-RING  
21. 7Y-1426 [1] COVER  
22. 7Y-0225 [3] SHAFT-PLANETARY  
23. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
24. 094-0580 [1] PLATE (10-MM THK)  
25. 6I-6583 [1] GEAR-SUN (13-TEETH)  
26. 7Y-1430 [1] GEAR-SUN (17-TEETH)  
27. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
28. 7Y-1432 [1] CARRIER  
29. 7X-2568 M [16] BOLT (M20X2.5X180-MM)  
30. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
31. 1U-8846 B SEALANT-GASKET  
33. 148-4705 [1] GEAR-RING (104-TEETH)  
34. 7Y-1433 [1] CARRIER  
35. 6D-0692 [1] SEAL-O-RING  
36. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
37. 114-1539 [6] PIN-DOWEL  
38. 191-3235 [1] HOUSING  
39. 168-8451 [2] BALL BEARING  
40. 114-1497 [1] SEAL GP-DUO-CONE  
41. 191-3236 [1] HOUSING  
42. 095-1270 M [2] SETSCREW-SOCKET (M12X1.75X30-MM)  
43. 148-4708 B [1] GEAR-RING (79-TEETH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP52170244
 

227-6913: DRIVE GP-FINAL

227-6913 DRIVE GP-FINAL -WITHOUT MOTOR
S/N MGG1-1689; JFZ1-6246
PART OF 267-6767 POWER TRAIN AR
i02752004 SEBP5217
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  227-6035 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  215-9982 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170245
 

296-6298: DRIVE GP-FINAL

296-6298 DRIVE GP-FINAL -WITH MOTOR
S/N MGG1690-1849; JFZ6247-7549
PART OF 353-0510 DRIVE GP-FINAL
i03896770 SEBP5217
2966298 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 215-9982 Y [1] MOTOR & MTG GP-TRAVEL  
2. 296-6299 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170246
 

296-6299: DRIVE GP-FINAL

296-6299 DRIVE GP-FINAL -WITHOUT MOTOR
S/N MGG1690-1849; JFZ6247-7549
PART OF 296-6298 DRIVE GP-FINAL
i03896944 SEBP5217
2966299 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6583 [1] GEAR-SUN (13-TEETH)  
2. 6I-6585 [3] GEAR-PLANETARY (44-TEETH)  
3. 7Y-0223 [3] SHAFT-PLANETARY  
4. 7Y-0225 [3] SHAFT-PLANETARY  
5. 7Y-1426 [1] COVER  
6. 7Y-1430 [1] GEAR-SUN (17-TEETH)  
7. 7Y-1431 [3] GEAR-PLANETARY (30-TEETH)  
8. 7Y-1432 [1] CARRIER  
9. 7Y-1433 [1] CARRIER  
10. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
11. 094-0580 [1] PLATE (10-MM THK)  
12. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
13. 094-1528 [6] WASHER (53X84X1-MM THK)  
14. 095-0891 [6] PIN-SPRING  
15. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
24. 114-1497 [1] SEAL GP-DUO-CONE  
  296-6165 [2] SEAL-RING  
  296-6166 [2] RING-TORIC  
25. 114-1539 [6] PIN-DOWEL  
26. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
27. 168-8451 [2] BALL BEARING  
28. 191-3235 [1] HOUSING  
29. 191-3236 [1] HOUSING  
30. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
31. 296-6300 Y [1] GEAR GP-TRANSFER  
32. 094-0616 [3] BEARING AS-ROLLER  
33. 094-1542 [6] BEARING-ROLLER  
34. 095-1270 M [2] SETSCREW-SOCKET (M12X1.75X30-MM)  
35. 3E-2338 [2] PLUG-PIPE  
36. 6D-0692 [1] SEAL-O-RING  
37. 7M-8485 [2] SEAL-O-RING  
38. 7X-2568 M [16] BOLT (M20X2.5X180-MM)  
39. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
40. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
41. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170247
 

353-0510: DRIVE GP-FINAL

353-0510 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N MGG1690-1849; JFZ6247-7549
PART OF 267-6767 POWER TRAIN AR
i04032645 SEBP5217
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  296-6298 Y [1] DRIVE GP-FINAL (WITH MOTOR)  
  145-3042 Y [1] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170248
 

353-0611: DRIVE GP-FINAL

353-0611 DRIVE GP-FINAL -WITHOUT MOTOR
S/N MGG1856-UP; JFZ8027-UP
PART OF 353-0646 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@521-3340@@@@@, @@@@@521-3341@@@@@
i04537373 SEBP5217
3530611 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6583 [1] GEAR-SUN (13-TEETH)  
2. 6I-6585 [3] GEAR-PLANETARY (44-TEETH)  
3. 7Y-0223 [3] SHAFT-PLANETARY  
4. 7Y-0225 [3] SHAFT-PLANETARY  
5. 7Y-1426 [1] COVER  
6. 7Y-1430 [1] GEAR-SUN (17-TEETH)  
7. 7Y-1431 [3] GEAR-PLANETARY (30-TEETH)  
8. 7Y-1432 [1] CARRIER  
9. 7Y-1433 [1] CARRIER  
10. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
11. 094-0580 [1] PLATE (10-MM THK)  
12. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
13. 094-1528 [6] WASHER (53X84X1-MM THK)  
14. 095-0891 [6] PIN-SPRING  
15. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
24. 114-1539 [6] PIN-DOWEL  
25. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
26. 174-4874 [1] SEAL GP-DUO-CONE  
27. 191-3235 [1] HOUSING  
28. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
29. 296-6220 [2] BALL BEARING  
30. 296-6268 [3] BEARING AS-ROLLER  
31. 296-6269 [6] BEARING-ROLLER  
32. 296-6300 Y [1] GEAR GP-TRANSFER  
33. 353-0612 [1] HOUSING-MOTOR  
34. 095-1270 M [2] SETSCREW-SOCKET (M12X1.75X30-MM)  
35. 3E-2338 [2] PLUG-PIPE  
36. 6D-0692 [1] SEAL-O-RING  
37. 7M-8485 [2] SEAL-O-RING  
38. 453-4137 [16] BOLT (M20X2.5X180-MM)  
39. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
40. 451-2176 [16] WASHER-HARD (22X35X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52170249
 

353-0613: DRIVE GP-FINAL

353-0613 DRIVE GP-FINAL -WITH MOTOR
S/N MGG1850-1855; JFZ7550-8026
PART OF 353-0641 DRIVE GP-FINAL
i04293692 SEBP5217
3530613 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 215-9982 Y [1] MOTOR & MTG GP-TRAVEL  
2. 353-0615 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Systems Operation
Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Troubleshooting
MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Caterpillar Parts SIS Catalog 320D :

WIRING GP-HEATER
306-8690 WIRING GP-HEATER
WIRING GP-FINE SWING
259-5052 WIRING GP-FINE SWING
306-8501 WIRING GP-FAN
WIRING GP-FAN
291-7716 WIRING GP-FAN
WIRING GP-FAN
291-7463 WIRING GP-FAN
WIRING GP-FAN
291-7463 WIRING GP-FAN
WIRING GP-ELECTRONIC CONTROL
296-4665 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
227-6035 DRIVE GP-FINAL
227-6913 DRIVE GP-FINAL
DRIVE GP-FINAL
296-6298 DRIVE GP-FINAL
DRIVE GP-FINAL
296-6299 DRIVE GP-FINAL
353-0510 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0611 DRIVE GP-FINAL

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.