OPERATOR STATION
AIR CONDITIONER GPCONSOLE GP
OPERATOR STATION
AIR CONDITIONER GP
#SEBP52170840
239-6507: COMPRESSOR GP-REFRIGERANT
239-6507 COMPRESSOR GP-REFRIGERANT
S/N MGG1743-UP; JFZ6497-UP
PART OF 272-4742 INSTALLATION AR-ENGINE
S/N MGG1743-UP; JFZ6497-UP
PART OF 272-4742 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 310-9694 | [1] | PULLEY | |
| 2. | 201-3888 | [1] | SPACER | |
| 3. | 255-2927 | [1] | V-BELT (AIR CONDITIONER COMPRESSOR) | |
| 4. | 327-7193 CY | [1] | PULLEY GP-IDLER | |
| 5. | 259-7244 Y | [1] | COMPRESSOR GP-REFRIGERANT | |
| 6. | 266-6207 | [1] | BRACKET AS | |
| 7. | 8T-3647 M | [4] | BOLT (M8X1.25X80-MM) | |
| 8. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4172 M | [3] | BOLT (M10X1.5X80-MM) | |
| 10. | 8T-4184 M | [2] | BOLT (M12X1.75X45-MM) | |
| 11. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 8T-6466 M | [4] | BOLT (M10X1.5X60-MM) | |
| 14. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52170841
259-7244: COMPRESSOR GP-REFRIGERANT
259-7244 COMPRESSOR GP-REFRIGERANT
S/N MGG1-UP; JFZ1-UP
PART OF 239-6507 COMPRESSOR GP-REFRIGERANT
S/N MGG1-UP; JFZ1-UP
PART OF 239-6507 COMPRESSOR GP-REFRIGERANT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 259-7286 | [1] | COIL AS (24-VOLT) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 2. | 264-9982 B | [1] | WASHER (6.2X12.2X0.1-MM THK) | |
| 3. | 264-9983 B | [1] | WASHER (6.2X12.2X0.3-MM THK) | |
| 4. | 264-9984 B | [1] | WASHER (6.2X12.2X0.5-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP52170842
284-4442: CONDENSER & LINES GP-RFGT
284-4442 CONDENSER & LINES GP-RFGT -CHASSIS
S/N MGG1-UP; JFZ1-UP
FOR USE WITH @@@@@235-9003@@@@@
AN ATTACHMENT
S/N MGG1-UP; JFZ1-UP
FOR USE WITH @@@@@235-9003@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP52170843
259-7184: CONDENSER & MTG GP-REFRIGERANT
259-7184 CONDENSER & MTG GP-REFRIGERANT
S/N MGG1-UP; JFZ1-UP
PART OF 272-4742 INSTALLATION AR-ENGINE
S/N MGG1-UP; JFZ1-UP
PART OF 272-4742 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 245-7749 Y | [1] | CONDENSER GP-REFRIGERANT | |
| 2. | 259-7207 | [1] | SUPPORT AS-CONDENSER | |
| 3. | 7X-2533 M | [4] | BOLT (M6X1X35-MM) | |
| 4. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 6. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52170844
273-5167: CONDENSER & MTG GP-REFRIGERANT
273-5167 CONDENSER & MTG GP-REFRIGERANT
S/N MGG1-UP; JFZ1-UP
PART OF 284-4442 CONDENSER & LINES GP-RFGT
Type 1
AN ATTACHMENT
S/N MGG1-UP; JFZ1-UP
PART OF 284-4442 CONDENSER & LINES GP-RFGT
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7Y-8561 | [1] | BUMPER | |
| 2. | 193-2764 | [1] | HANDLE AS | |
| 3. | 245-7749 Y | [1] | CONDENSER GP-REFRIGERANT | |
| 4. | 293-1121 | [1] | SUPPORT AS | |
| 5. | 273-5399 | [1] | BRACKET AS | |
| 6. | 293-1124 | [1] | SUPPORT AS | |
| 7. | 293-1127 | [1] | SUPPORT AS-CONDENSER | |
| 7A. | 099-7857 | [2] | HINGE | |
| 8. | 193-2765 | [2] | SUPPORT AS | |
| 9. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 10. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 11. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 13. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4179 M | [4] | BOLT (M12X1.75X20-MM) | |
| 15. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 16. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52170845
273-5167: CONDENSER & MTG GP-REFRIGERANT
273-5167 CONDENSER & MTG GP-REFRIGERANT
S/N MGG1-UP; JFZ1-UP
PART OF 284-4442 CONDENSER & LINES GP-RFGT
Type 2
AN ATTACHMENT
S/N MGG1-UP; JFZ1-UP
PART OF 284-4442 CONDENSER & LINES GP-RFGT
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7Y-8561 | [1] | BUMPER | |
| 2. | 193-2764 | [1] | HANDLE AS | |
| 3. | 245-7749 Y | [1] | CONDENSER GP-REFRIGERANT | |
| 4. | 346-8012 C | [1] | SUPPORT AS | |
| 5. | 273-5399 | [1] | BRACKET AS | |
| 6. | 346-8014 C | [1] | SUPPORT AS | |
| 7. | 293-1127 | [1] | SUPPORT AS-CONDENSER | |
| 8. | 193-2765 | [2] | SUPPORT AS | |
| 9. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 10. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 11. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 13. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4179 M | [4] | BOLT (M12X1.75X20-MM) | |
| 15. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 16. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52170846
273-5167: CONDENSER & MTG GP-REFRIGERANT
273-5167 CONDENSER & MTG GP-REFRIGERANT
S/N MGG1-UP; JFZ1-UP
PART OF 284-4442 CONDENSER & LINES GP-RFGT
Type 3
AN ATTACHMENT
S/N MGG1-UP; JFZ1-UP
PART OF 284-4442 CONDENSER & LINES GP-RFGT
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7Y-8561 | [1] | BUMPER | |
| 2. | 357-4101 C | [1] | HANDLE AS (COMPRESSION) | |
| 3. | 245-7749 Y | [1] | CONDENSER GP-REFRIGERANT | |
| 4. | 346-8012 | [1] | SUPPORT AS | |
| 5. | 273-5399 | [1] | BRACKET AS | |
| 6. | 363-9545 C | [1] | BRACKET AS | |
| 7. | 363-9548 C | [1] | SUPPORT AS-CONDENSER | |
| 7A. | 099-7857 | [2] | HINGE | |
| 8. | 372-9551 | [2] | SUPPORT AS | |
| 9. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 10. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 11. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 13. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4179 M | [4] | BOLT (M12X1.75X20-MM) | |
| 15. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 16. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| 18. | 5P-8523 C | [1] | GROMMET | |
| 19. | 363-9550 C | [1] | PLATE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52170847
245-7749: CONDENSER GP-REFRIGERANT
245-7749 CONDENSER GP-REFRIGERANT
S/N MGG1-UP; JFZ1-UP
PART OF 259-7184, 273-5167 CONDENSER & MTG GP-REFRIGERANT
ALSO AN ATTACHMENT
S/N MGG1-UP; JFZ1-UP
PART OF 259-7184, 273-5167 CONDENSER & MTG GP-REFRIGERANT
ALSO AN ATTACHMENT
For full view, you need register
#SEBP52170848
245-7922: CONSOLE GP-OPERATOR
245-7922 CONSOLE GP-OPERATOR
S/N MGG1-UP; JFZ1-UP
PART OF 273-5387 OPERATOR AR
Type 1
S/N MGG1-UP; JFZ1-UP
PART OF 273-5387 OPERATOR AR
Type 1
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 176-1916 | [2] | GROMMET | |
| 2. | 178-5422 | [2] | GROMMET | |
| 3. | 178-5423 | [2] | GROMMET | |
| 4. | 185-8161 | [2] | INSULATOR | |
| 5. | 235-8893 | [2] | SUPPORT | |
| 6. | 235-8894 | [2] | SUPPORT | |
| 7. | 259-7349 Y | [1] | CONSOLE GP-OPERATOR (LH) | |
| 8. | 259-7348 Y | [1] | CONSOLE GP-OPERATOR (RH) | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 11. | 9X-2043 M | [16] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 12. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 13. | 7K-1181 | [4] | STRAP-CABLE | |
| 14. | 122-9617 | [2] | GUARD | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52170849
245-7922: CONSOLE GP-OPERATOR
245-7922 CONSOLE GP-OPERATOR
S/N MGG1-UP; JFZ1-UP
PART OF 273-5387, 327-6568 OPERATOR AR
Type 2
S/N MGG1-UP; JFZ1-UP
PART OF 273-5387, 327-6568 OPERATOR AR
Type 2
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 176-1916 | [2] | GROMMET | |
| 2. | 178-5422 | [2] | GROMMET | |
| 3. | 178-5423 | [2] | GROMMET | |
| 4. | 185-8161 | [2] | INSULATOR | |
| 5. | 235-8893 | [2] | SUPPORT | |
| 6. | 235-8894 | [2] | SUPPORT | |
| 7. | 259-7349 Y | [1] | CONSOLE GP-OPERATOR (LH) | |
| 8. | 259-7348 Y | [1] | CONSOLE GP-OPERATOR (RH) | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 11. | 9X-2046 CM | [8] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 12. | 9X-2045 CM | [12] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 13. | 7K-1181 | [4] | STRAP-CABLE | |
| 14. | 122-9617 | [2] | GUARD | |
| 15. | 105-1766 C | [8] | SPACER (6.6X11X6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
