AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

259-4965 WIRING GP-FINE SWING S/N NAC1-UP PART OF 286-0152 CHASSIS AR 325D L EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR
SPROCKET GP

EXCAVATOR 325D L EXCAVATOR NAC
 325D L Excavator NAC00001-UP (MACHINE) POWERED BY C7 Engine SEBP5221 325D L NAC   (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
251-0448 WIRING GP-FAN
WIRING GP-FAN
291-7460 WIRING GP-FAN
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
WIRING GP-FUEL SYSTEM
259-5053 WIRING GP-FUEL SYSTEM
WIRING GP-PLATFORM
251-0430 WIRING GP-PLATFORM
 

#SEBP52210220
 

259-4965: WIRING GP-FINE SWING

259-4965 WIRING GP-FINE SWING
S/N NAC1-UP
PART OF 286-0152 CHASSIS AR
i02296363 SEBP5221
2594965 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8109 [1] BRACKET AS  
2. 111-4836 [6] CLIP  
3. 111-4837 [2] CLIP  
4. 291-7551 [1] HARNESS AS-MOTOR (SWING MOTOR CONTROL)  
  103-2529 E HOSE (72-CM)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
5. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
7. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP52210221
 

259-5053: WIRING GP-FUEL SYSTEM

259-5053 WIRING GP-FUEL SYSTEM -PRIMING PUMP
S/N NAC1-UP
PART OF 247-7458 PUMP GP-FUEL PRIMING
AN ATTACHMENT
i02301743 SEBP5221
2595053 WIRING GP-FUEL SYSTEM Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7K-1181 [7] STRAP-CABLE  
3. 137-6606 [1] FILM-IDENTIFICATION (FUEL)  
4. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP)  
5. 267-7967 [1] HARNESS AS-PUMP (FUEL)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52210222
 

251-0430: WIRING GP-PLATFORM

251-0430 WIRING GP-PLATFORM
S/N NAC1-UP
PART OF 229-9072 OPERATOR AR
i02296219 SEBP5221
2510430 WIRING GP-PLATFORM Parts scheme 2510430 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [16] STRAP-CABLE  
4. 111-4836 [4] CLIP  
5. 111-4838 [2] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [14] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 264-7095 [1] HARNESS AS-PLATFORM  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  8T-8729 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [25] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [23] STRAP-CABLE  
  8T-8737 [39] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [14] TERMINAL (FEMALE)  
  9W-0852 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 BE TUBE-HEAT SHRINK (10.85-MM DIA)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [32] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  9X-3402 [97] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [97] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8050 [2] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [2] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  2L-8052 [1] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [1] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [4] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [25] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [25] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  155-2270 [12] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [3] DIODE  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
  230-4011 [4] PLUG AS-CONNECTOR (2-PIN)  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [7] TERMINAL (MALE)  
  243-4505 [2] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [4] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
11. 095-0728 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 3E-5169 [1] GUARD-SWITCH  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP52210223
 

227-6115: DRIVE GP-FINAL

227-6115 DRIVE GP-FINAL -WITH TRAVEL MOTOR
S/N NAC1-250
PART OF 171-9410 POWER TRAIN AR
i02297547 SEBP5221
2276115 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-6116 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
2. 204-2674 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52210224
 

227-6116: DRIVE GP-FINAL

227-6116 DRIVE GP-FINAL -WITHOUT MOTOR
S/N NAC1-250
PART OF 227-6115 DRIVE GP-FINAL
i02117254 SEBP5221
2276116 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 094-0578 B [1] PLATE (8-MM THK)  
3. 094-0579 B [1] PLATE (9-MM THK)  
4. 094-0580 B [1] PLATE (10-MM THK)  
5. 094-1528 [12] WASHER (53X84X1-MM THK)  
6. 168-8452 J [2] BALL BEARING  
7. 169-5585 J [1] HOUSING  
8. 169-5589 [1] GEAR-SUN (24-TEETH)  
9. 169-5590 [1] GEAR-SUN (24-TEETH)  
10. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
11. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
12. 169-5601 [3] SHAFT-PLANETARY  
13. 169-5602 [3] SHAFT-PLANETARY  
14. 171-9387 [1] GEAR-RING (64-TEETH)  
15. 191-2569 [3] BEARING AS (CAGED ROLLER)  
16. 191-2570 [6] BEARING AS (CAGED ROLLER)  
17. 191-2571 [1] CARRIER-PLANETARY  
18. 191-2676 [1] GEAR-RING (72-TEETH)  
19. 191-2683 [1] GEAR-SUN (20-TEETH)  
20. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
21. 191-2685 [3] BEARING AS  
22. 191-2686 [1] CARRIER AS  
23. 191-2689 [3] WASHER (34X70X1-MM THK)  
24. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
25. 199-4503 [1] COVER  
26. 207-1571 J [1] SEAL GP-DUO-CONE  
26A. 214-3570 [2] RING-TORIC  
26B. Z [2] SEAL-RING  
27. 227-6117 J [1] HOUSING-MOTOR  
28. 227-6118 J [1] RETAINER  
29. 227-6119 [1] CARRIER-PLANETARY  
30. 227-6123 J [2] DOWEL  
31. 227-6124 J [2] PLATE-WASHER  
32. 093-1731 [2] RING-RETAINING  
33. 095-0891 [6] PIN-SPRING  
34. 096-0433 [3] RING-RETAINING  
35. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
36. 171-9298 [1] SEAL-O-RING  
37. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
38. 7M-8485 [2] SEAL-O-RING  
39. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
40. 8T-0293 JM [4] BOLT (M12X1.75X20-MM)  
41. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
42. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
43. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  227-6125 J [1] KIT-HOUSING (FINAL DRIVE)  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP52210225
 

267-6796: DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL -WITHOUT MOTOR
S/N NAC251-UP
PART OF 267-6877 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@333-2909@@@@@
i03077037 SEBP5221
2676796 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 267-6863 BJ [1] SHIM (0.75-MM THK)  
  7Y-0752 BJ [1] SHIM (0.8-MM THK)  
  267-6864 BJ [1] SHIM (0.85-MM THK)  
  267-6865 BJ [1] SHIM (0.9-MM THK)  
  267-6866 BJ [1] SHIM (0.95-MM THK)  
  7Y-0753 BJ [1] SHIM (1-MM THK)  
  267-6867 BJ [1] SHIM (1.2-MM THK)  
  267-6868 BJ [1] SHIM (1.4-MM THK)  
  7Y-0754 BJ [1] SHIM (1.6-MM THK)  
  267-6869 BJ [1] SHIM (1.8-MM THK)  
  267-6870 BJ [1] SHIM (2-MM THK)  
  267-6871 BJ [1] SHIM (2.3-MM THK)  
5. 094-0578 B [1] PLATE (8-MM THK)  
  094-0579 B [1] PLATE (9-MM THK)  
  094-0580 B [1] PLATE (10-MM THK)  
8. 094-1528 [12] WASHER (53X84X1-MM THK)  
9. 114-1540 J [4] PIN-DOWEL  
10. 168-8452 J [2] BALL BEARING  
11. 169-5589 [1] GEAR-SUN (24-TEETH)  
12. 169-5590 [1] GEAR-SUN (24-TEETH)  
13. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
14. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
15. 169-5601 [3] SHAFT-PLANETARY  
16. 169-5602 [3] SHAFT-PLANETARY  
17. 171-9387 [1] GEAR-RING (64-TEETH)  
18. 191-2569 [3] BEARING AS (CAGED ROLLER)  
19. 191-2570 [6] BEARING AS (CAGED ROLLER)  
20. 191-2571 [1] CARRIER-PLANETARY  
21. 191-2676 [1] GEAR-RING (72-TEETH)  
22. 191-2683 [1] GEAR-SUN (20-TEETH)  
23. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
24. 191-2685 [3] BEARING AS  
25. 191-2686 [1] CARRIER AS  
  191-2687 [3] RACE-BEARING  
26. 191-2689 [3] WASHER (34X70X1-MM THK)  
27. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
28. 199-4503 [1] COVER  
29. 207-1571 J [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
30. 267-6797 J [1] HOUSING-MOTOR  
31. 267-6798 J [1] HOUSING  
32. 267-6799 [1] CARRIER-PLANETARY  
33. 267-6800 J [1] GEAR-COUPLING  
43. 093-1731 [2] RING-RETAINING  
44. 095-0891 [6] PIN-SPRING  
45. 096-0433 [3] RING-RETAINING  
46. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
47. 171-9298 [1] SEAL-O-RING  
48. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
49. 7M-8485 [2] SEAL-O-RING  
50. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
51. 7Y-5217 JM [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
52. 8T-3282 J [16] WASHER-HARD (22X35X3.5-MM THK)  
53. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
54. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
55. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  267-6818 J [1] KIT-FINAL DRIVE BEARING  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP52210226
 

267-6877: DRIVE GP-FINAL

267-6877 DRIVE GP-FINAL -WITH MOTOR
S/N NAC251-UP
PART OF 171-9410 POWER TRAIN AR
i03077012 SEBP5221
2676877 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2674 Y [1] MOTOR & MTG GP-TRAVEL  
2. 267-6796 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52210227
 

333-2909: DRIVE GP-FINAL

333-2909 DRIVE GP-FINAL -WITHOUT MOTOR
S/N NAC251-UP
FIELD REPLACEMENT FOR @@@@@267-6796@@@@@
i04308621 SEBP5221
3332909 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
2. 267-6863 B [1] SHIM (0.75-MM THK)  
  7Y-0752 B [1] SHIM (0.8-MM THK)  
  267-6864 B [1] SHIM (0.85-MM THK)  
  267-6865 B [1] SHIM (0.9-MM THK)  
  267-6866 B [1] SHIM (0.95-MM THK)  
  7Y-0753 B [1] SHIM (1-MM THK)  
  267-6867 B [1] SHIM (1.2-MM THK)  
  267-6868 B [1] SHIM (1.4-MM THK)  
  7Y-0754 B [1] SHIM (1.6-MM THK)  
  267-6869 B [1] SHIM (1.8-MM THK)  
  267-6870 B [1] SHIM (2-MM THK)  
  267-6871 B [1] SHIM (2.3-MM THK)  
3. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
5. 094-0578 B [1] PLATE (8-MM THK)  
6. 094-0579 B [1] PLATE (9-MM THK)  
7. 094-0580 B [1] PLATE (10-MM THK)  
8. 094-1528 [12] WASHER (53X84X1-MM THK)  
9. 114-1540 [4] PIN-DOWEL  
10. 333-2914 [2] BALL BEARING  
11. 169-5589 [1] GEAR-SUN (24-TEETH)  
12. 169-5590 [1] GEAR-SUN (24-TEETH)  
13. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
14. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
15. 171-9387 [1] GEAR-RING (64-TEETH)  
16. 169-5601 [3] SHAFT-PLANETARY  
17. 169-5602 [3] SHAFT-PLANETARY  
18. 191-2689 [3] WASHER (34X70X1-MM THK)  
19. 333-2916 [3] BEARING AS  
20. 333-2917 [6] BEARING AS  
21. 191-2571 [1] CARRIER-PLANETARY  
22. 191-2683 [1] GEAR-SUN (20-TEETH)  
23. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
24. 191-2676 [1] GEAR-RING (72-TEETH)  
25. 296-6248 [3] BEARING AS-ROLLER  
26. 191-2686 [1] CARRIER AS  
27. 199-4503 [1] COVER  
28. 207-1571 [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
29. 267-6797 [1] HOUSING-MOTOR  
30. 267-6799 [1] CARRIER-PLANETARY  
31. 267-6800 [1] GEAR-COUPLING  
41. 267-6798 [1] HOUSING  
42. 093-1731 [2] RING-RETAINING  
43. 095-0891 [6] PIN-SPRING  
44. 096-0433 [3] RING-RETAINING  
45. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
46. 171-9298 [1] SEAL-O-RING  
47. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
50. 7Y-5217 M [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
51. 8T-3282 [16] WASHER-HARD (22X35X3.5-MM THK)  
52. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
53. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
54. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP52210228
 

171-9410: POWER TRAIN AR

171-9410 POWER TRAIN AR
S/N NAC1-UP
PART OF 298-4193 GENERAL AR
i03076878 SEBP5221
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  199-4487 Y [1] DRIVE GP-SWING (WITH MOTOR)  
  171-9412 Y [1] FASTENER GP-SWING & FINAL DR  
  227-6115 Y [2] DRIVE GP-FINAL (WITH TRAVEL MOTOR)  
    S/N NAC1-250
  267-6877 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
    S/N NAC251-UP
  179-2994 Y [2] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52210229
 

179-2994: SPROCKET GP

179-2994 SPROCKET GP -NON-SEGMENTED
S/N NAC1-UP
PART OF 171-9410 POWER TRAIN AR
i01643390 SEBP5221
1792994 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-4898 [1] SPROCKET-TRACK (21-TEETH)  
2. 504-5153 M [18] BOLT (M20X2.5X50-MM)  
3. 8T-3282 [18] WASHER-HARD (22X35X3.5-MM THK)  
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Air Inlet Heater Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Electrical Connectors - Inspect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Sensors and Electrical Connectors
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Indicator Lamp Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 06 Warning Lamp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 05 Warning Lamp open/short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 05 Diagnostic Lamp current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 06 Diagnostic Lamp current above normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Caterpillar Parts SIS Catalog 325D L :

WIRING GP-FAN
291-7460 WIRING GP-FAN
251-0448 WIRING GP-FAN
WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
WIRING GP-CONVERTER
251-0485 WIRING GP-CONVERTER
WIRING GP-CONVERTER
251-0482 WIRING GP-CONVERTER
WIRING GP-CONSOLE
251-0435 WIRING GP-CONSOLE
251-0433 WIRING GP-CONSOLE
WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
WIRING GP-FUEL SYSTEM
259-5053 WIRING GP-FUEL SYSTEM
WIRING GP-PLATFORM
251-0430 WIRING GP-PLATFORM
DRIVE GP-FINAL
227-6115 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6116 DRIVE GP-FINAL
DRIVE GP-FINAL
267-6796 DRIVE GP-FINAL
DRIVE GP-FINAL
267-6877 DRIVE GP-FINAL
DRIVE GP-FINAL
333-2909 DRIVE GP-FINAL
171-9410 POWER TRAIN AR

Truck sale:

 
62,927 
Caterpillar 325DL, Construction
- Crawler Excavators
TOROMONT CAT (QUÉBEC)
Canada
Caterpillar 325DL, Construction
 
Caterpillar 325DL, Construction
- Crawler Excavators
MANTRAC NIGERIA LIMITED
Nigeria
Caterpillar 325DL, Construction
55,681 
Caterpillar 325DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 325DL, Construction
129,000 
Caterpillar 325DL, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 325DL, Construction
91,600 
Caterpillar 325DL, Construction
- Crawler Excavators
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.