113-6170 FASTENER GP-LIFTING S/N C7C5500-UP REAR PART OF 290-0756 ENGINE AR, 290-0754 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 325D L

186-5892 FLYWHEEL GP
S/N C7C5500-UP
FITS 10 INCH OR 11.5 INCH OVER THE CENTER CLUTCH
PART OF 290-0756 ENGINE AR, 290-0754 ENGINE AR-COMPLETE
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING
CANNOT BE USED WITH FLYWHEEL STUB SHAFT
ALSO AN ATTACHMENT

i01564247 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	202-2382	[1]	FLYWHEEL AS
1A.	1W-1064	[1]	GEAR-FLYWHEEL RING (126-TEETH)
2.	6V-8197 M	[8]	BOLT (M12X1.75X40-MM)
3.	5P-8245	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	3E-3213	[1]	PIN-SPRING
	M		METRIC PART

#SEBP52220042

205-1321: GEAR GP-FRONT

GEAR GP-FRONT

205-1321 GEAR GP-FRONT
S/N C7C5500-UP
PART OF 270-4212, 270-4213 ENGINE AR-CORE
ALSO AN ATTACHMENT

i01686025 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	113-6069	[1]	PLATE-THRUST
2.	115-4219	[1]	PLATE-RETAINING
3.	200-4495	[1]	SHAFT-IDLER
4.	205-1320	[1]	GEAR AS-IDLER (50-TEETH)
4A.	115-4072	[1]	BEARING
5.	136-4183 M	[1]	BOLT-12 POINT HEAD (M10X1.5X30-MM)
6.	6V-5843 M	[2]	BOLT (M10X1.5X45-MM)
	M		METRIC PART

#SEBP52220043

7W-8813: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

7W-8813 HOUSING GP-FLYWHEEL
S/N C7C5500-UP
SAE NO. 3. PROVIDES STARTING MOTOR MOUNTING FLANGE ON RH SIDE
PART OF 290-0756 ENGINE AR, 290-0754 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i00417846 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-5233	[1]	HOUSING-FLYWHEEL
2.	2P-1294	[1]	PLUG-SEAL
3.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
4.	7X-3347 M	[10]	BOLT-LOCKING (M14X2X45-MM)
5.	9S-4182	[1]	PLUG (7/16-20-THD)
6.	9S-4183 CB	[1]	PLUG (1-1/16-12-THD)(DRAIN)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP52220044

245-3260: HOUSING GP-FRONT

HOUSING GP-FRONT

245-3260 HOUSING GP-FRONT
S/N C7C5500-UP
PART OF 270-4212, 270-4213 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02297319 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	245-3259	[1]	HOUSING-FRONT
2.	6V-3918 M	[4]	BOLT (M8X1.25X50-MM)
3.	6V-5217 M	[8]	BOLT (M8X1.25X20-MM)
4.	9M-1974	[12]	WASHER-HARD (8.8X16X2-MM THK)
5.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP52220045

453-2204: KIT-ENGINE GASKET

KIT-ENGINE GASKET

453-2204 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE
S/N LAL1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FIELD INSTALLATION

i05841323 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4Y-9652	[2]	GASKET
7W-5340	[1]	GASKET
371-3481	[1]	GASKET
166-2905	[1]	SEAL-INTEGRAL
2K-8199	[2]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
3P-1156	[2]	SEAL-O-RING
4F-9653	[1]	SEAL-O-RING
6V-5063	[2]	SEAL-O-RING
6V-6609	[1]	SEAL-O-RING
112-3540	[1]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
214-7566	[3]	SEAL-O-RING
214-7568	[2]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
295-5609	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52220046

439-8620: KIT-FRONT COVER GASKET

KIT-FRONT COVER GASKET

439-8620 KIT-FRONT COVER GASKET
S/N LAL1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@290-0756@@@@@
FIELD INSTALLATION

i06071304 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4R-9999	[1]	EXCLUDER-CRANKSHAFT SEAL
166-1781	[1]	GASKET
245-7339	[1]	SEAL-CRANKSHAFT (FRONT)
135-9819	[1]	SEAL-INTEGRAL
061-9455	[1]	SEAL-O-RING
203-3940	[2]	SEAL-O-RING
227-5904	[1]	SEAL-O-RING
228-4947	[2]	SEAL-O-RING
126-1757	[2]	WASHER (10.85X19.3X1.27-MM THK)