251-0430 WIRING GP-PLATFORM S/N LAL1-UP PART OF 229-9072 OPERATOR AR 325D L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 251-0430 WIRING GP-
1. 267-7643 WIRING GP-
2. 238-1570 WIRING GP-
3. 238-1570 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

4. 227-6115 DRIVE GP-F
5. 227-6116 DRIVE GP-F
6. 267-6796 DRIVE GP-F
7. 267-6877 DRIVE GP-F
8. 333-2909 DRIVE GP-F
9. 333-2982 DRIVE GP-F
0. INFORMATION

EXCAVATOR 325D L EXCAVATOR LAL
325D L Excavator LAL00001-UP (MACHINE) POWERED BY C7 Engine SEBP5222 325D L LAL (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

259-5053 WIRING GP-FUEL SYSTEM

259-4949 WIRING GP-MEDIUM PRESSURE

251-0430 WIRING GP-PLATFORM

267-7643 WIRING GP-QUICK COUPLER

238-1570 WIRING GP-REFUELING PUMP

#SEBP52220290

251-0430: WIRING GP-PLATFORM

WIRING GP-PLATFORM

251-0430 WIRING GP-PLATFORM
S/N LAL1-UP
PART OF 229-9072 OPERATOR AR

i02296219 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[16]	STRAP-CABLE
4.	111-4836	[4]	CLIP
5.	111-4838	[2]	CLIP
6.	111-4839	[2]	STRAP
7.	116-0118	[14]	CLIP
8.	234-1122	[1]	COVER
9.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
10.	264-7095	[1]	HARNESS AS-PLATFORM
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[25]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[23]	STRAP-CABLE
	8T-8737	[39]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[14]	TERMINAL (FEMALE)
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[32]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	9X-3402	[97]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[97]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1768	[10]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[4]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	155-2270	[12]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[3]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[4]	PLUG AS-CONNECTOR (2-PIN)
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[7]	TERMINAL (MALE)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
11.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	3E-5169	[1]	GUARD-SWITCH
14.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
15.	7X-2621 M	[7]	BOLT (M10X1.5X12-MM)
16.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP52220291

267-7643: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

267-7643 WIRING GP-QUICK COUPLER
S/N LAL1-UP
PART OF 262-3580 CONTROL AR-COUPLER
AN ATTACHMENT

i02419838 SEBP5222

2677643 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	7K-1181	[9]	STRAP-CABLE
3.	116-0118	[1]	CLIP
4.	267-7645	[1]	HARNESS AS-SOLENOID (QUICK COUPLER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
5.	4P-7581	[1]	CLIP (LADDER)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP52220292

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N LAL1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT

i02180323 SEBP5222

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	238-1593	[1]	WIRE AS
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP52220293

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N LAL1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT

i03161300 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP52220294

227-6115: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6115 DRIVE GP-FINAL -WITH TRAVEL MOTOR
S/N LAL1-250
PART OF 171-9410 POWER TRAIN AR

i02297547 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-6116 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
2.	204-2674 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP52220295

227-6116: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6116 DRIVE GP-FINAL -WITHOUT MOTOR
S/N LAL1-250
PART OF 227-6115 DRIVE GP-FINAL

i02117254 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	094-0578 B	[1]	PLATE (8-MM THK)
3.	094-0579 B	[1]	PLATE (9-MM THK)
4.	094-0580 B	[1]	PLATE (10-MM THK)
5.	094-1528	[12]	WASHER (53X84X1-MM THK)
6.	168-8452 J	[2]	BALL BEARING
7.	169-5585 J	[1]	HOUSING
8.	169-5589	[1]	GEAR-SUN (24-TEETH)
9.	169-5590	[1]	GEAR-SUN (24-TEETH)
10.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
11.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
12.	169-5601	[3]	SHAFT-PLANETARY
13.	169-5602	[3]	SHAFT-PLANETARY
14.	171-9387	[1]	GEAR-RING (64-TEETH)
15.	191-2569	[3]	BEARING AS (CAGED ROLLER)
16.	191-2570	[6]	BEARING AS (CAGED ROLLER)
17.	191-2571	[1]	CARRIER-PLANETARY
18.	191-2676	[1]	GEAR-RING (72-TEETH)
19.	191-2683	[1]	GEAR-SUN (20-TEETH)
20.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
21.	191-2685	[3]	BEARING AS
22.	191-2686	[1]	CARRIER AS
23.	191-2689	[3]	WASHER (34X70X1-MM THK)
24.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
25.	199-4503	[1]	COVER
26.	207-1571 J	[1]	SEAL GP-DUO-CONE
26A.	214-3570	[2]	RING-TORIC
26B.	Z	[2]	SEAL-RING
27.	227-6117 J	[1]	HOUSING-MOTOR
28.	227-6118 J	[1]	RETAINER
29.	227-6119	[1]	CARRIER-PLANETARY
30.	227-6123 J	[2]	DOWEL
31.	227-6124 J	[2]	PLATE-WASHER
32.	093-1731	[2]	RING-RETAINING
33.	095-0891	[6]	PIN-SPRING
34.	096-0433	[3]	RING-RETAINING
35.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
36.	171-9298	[1]	SEAL-O-RING
37.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
38.	7M-8485	[2]	SEAL-O-RING
39.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
40.	8T-0293 JM	[4]	BOLT (M12X1.75X20-MM)
41.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
42.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
43.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	227-6125 J	[1]	KIT-HOUSING (FINAL DRIVE)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#SEBP52220296

267-6796: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL -WITHOUT MOTOR
S/N LAL251-UP
PART OF 267-6877, 333-2982 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@333-2909@@@@@
ALSO AN ATTACHMENT

i03077037 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	267-6863 BJ	[1]	SHIM (0.75-MM THK)
	7Y-0752 BJ	[1]	SHIM (0.8-MM THK)
	267-6864 BJ	[1]	SHIM (0.85-MM THK)
	267-6865 BJ	[1]	SHIM (0.9-MM THK)
	267-6866 BJ	[1]	SHIM (0.95-MM THK)
	7Y-0753 BJ	[1]	SHIM (1-MM THK)
	267-6867 BJ	[1]	SHIM (1.2-MM THK)
	267-6868 BJ	[1]	SHIM (1.4-MM THK)
	7Y-0754 BJ	[1]	SHIM (1.6-MM THK)
	267-6869 BJ	[1]	SHIM (1.8-MM THK)
	267-6870 BJ	[1]	SHIM (2-MM THK)
	267-6871 BJ	[1]	SHIM (2.3-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
	094-0579 B	[1]	PLATE (9-MM THK)
	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540 J	[4]	PIN-DOWEL
10.	168-8452 J	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	169-5601	[3]	SHAFT-PLANETARY
16.	169-5602	[3]	SHAFT-PLANETARY
17.	171-9387	[1]	GEAR-RING (64-TEETH)
18.	191-2569	[3]	BEARING AS (CAGED ROLLER)
19.	191-2570	[6]	BEARING AS (CAGED ROLLER)
20.	191-2571	[1]	CARRIER-PLANETARY
21.	191-2676	[1]	GEAR-RING (72-TEETH)
22.	191-2683	[1]	GEAR-SUN (20-TEETH)
23.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
24.	191-2685	[3]	BEARING AS
25.	191-2686	[1]	CARRIER AS
	191-2687	[3]	RACE-BEARING
26.	191-2689	[3]	WASHER (34X70X1-MM THK)
27.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
28.	199-4503	[1]	COVER
29.	207-1571 J	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
30.	267-6797 J	[1]	HOUSING-MOTOR
31.	267-6798 J	[1]	HOUSING
32.	267-6799	[1]	CARRIER-PLANETARY
33.	267-6800 J	[1]	GEAR-COUPLING
43.	093-1731	[2]	RING-RETAINING
44.	095-0891	[6]	PIN-SPRING
45.	096-0433	[3]	RING-RETAINING
46.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
47.	171-9298	[1]	SEAL-O-RING
48.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
49.	7M-8485	[2]	SEAL-O-RING
50.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
51.	7Y-5217 JM	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
52.	8T-3282 J	[16]	WASHER-HARD (22X35X3.5-MM THK)
53.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
54.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
55.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	267-6818 J	[1]	KIT-FINAL DRIVE BEARING
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP52220297

267-6877: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6877 DRIVE GP-FINAL -WITH MOTOR
S/N LAL251-UP
PART OF 171-9410 POWER TRAIN AR

i03077012 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	204-2674 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	267-6796 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP52220298

333-2909: DRIVE GP-FINAL

DRIVE GP-FINAL

333-2909 DRIVE GP-FINAL -WITHOUT MOTOR
S/N LAL1-UP
FIELD REPLACEMENT FOR @@@@@267-6796@@@@@

i04308621 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
2.	267-6863 B	[1]	SHIM (0.75-MM THK)
	7Y-0752 B	[1]	SHIM (0.8-MM THK)
	267-6864 B	[1]	SHIM (0.85-MM THK)
	267-6865 B	[1]	SHIM (0.9-MM THK)
	267-6866 B	[1]	SHIM (0.95-MM THK)
	7Y-0753 B	[1]	SHIM (1-MM THK)
	267-6867 B	[1]	SHIM (1.2-MM THK)
	267-6868 B	[1]	SHIM (1.4-MM THK)
	7Y-0754 B	[1]	SHIM (1.6-MM THK)
	267-6869 B	[1]	SHIM (1.8-MM THK)
	267-6870 B	[1]	SHIM (2-MM THK)
	267-6871 B	[1]	SHIM (2.3-MM THK)
3.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
6.	094-0579 B	[1]	PLATE (9-MM THK)
7.	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540	[4]	PIN-DOWEL
10.	333-2914	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	171-9387	[1]	GEAR-RING (64-TEETH)
16.	169-5601	[3]	SHAFT-PLANETARY
17.	169-5602	[3]	SHAFT-PLANETARY
18.	191-2689	[3]	WASHER (34X70X1-MM THK)
19.	333-2916	[3]	BEARING AS
20.	333-2917	[6]	BEARING AS
21.	191-2571	[1]	CARRIER-PLANETARY
22.	191-2683	[1]	GEAR-SUN (20-TEETH)
23.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
24.	191-2676	[1]	GEAR-RING (72-TEETH)
25.	296-6248	[3]	BEARING AS-ROLLER
26.	191-2686	[1]	CARRIER AS
27.	199-4503	[1]	COVER
28.	207-1571	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
29.	267-6797	[1]	HOUSING-MOTOR
30.	267-6799	[1]	CARRIER-PLANETARY
31.	267-6800	[1]	GEAR-COUPLING
41.	267-6798	[1]	HOUSING
42.	093-1731	[2]	RING-RETAINING
43.	095-0891	[6]	PIN-SPRING
44.	096-0433	[3]	RING-RETAINING
45.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
46.	171-9298	[1]	SEAL-O-RING
47.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
48.	7M-8485	[2]	SEAL-O-RING
49.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
50.	7Y-5217 M	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
51.	8T-3282	[16]	WASHER-HARD (22X35X3.5-MM THK)
52.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
53.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
54.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP52220299

333-2982: DRIVE GP-FINAL

DRIVE GP-FINAL

333-2982 DRIVE GP-FINAL -WITH MOTOR, BIODEGRADABLE OIL
S/N LAL1-UP
PART OF 353-0672 DRIVE GP-FINAL, 229-1791 HYDRAULIC AR-BIODEGRADABLE OIL
AN ATTACHMENT

i03669660 SEBP5222

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	215-9956 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	267-6796 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Air Inlet Heater Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Electrical Connectors - Inspect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Sensors and Electrical Connectors
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Indicator Lamp Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0324 FMI 06 Warning Lamp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0324 FMI 05 Warning Lamp open/short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1266 FMI 05 Diagnostic Lamp current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1266 FMI 06 Diagnostic Lamp current above normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Throttle Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Caterpillar Parts SIS Catalog 325D L :

259-4949 WIRING GP-MEDIUM PRESSURE

259-5053 WIRING GP-FUEL SYSTEM

259-4965 WIRING GP-FINE SWING

291-7460 WIRING GP-FAN

251-0448 WIRING GP-FAN

330-6022 WIRING GP-ENGINE

198-2714 WIRING GP-ENGINE

251-0485 WIRING GP-CONVERTER

267-7643 WIRING GP-QUICK COUPLER

238-1570 WIRING GP-REFUELING PUMP

227-6115 DRIVE GP-FINAL

227-6116 DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL

267-6877 DRIVE GP-FINAL

333-2909 DRIVE GP-FINAL

Truck sale:

62,927

Caterpillar 325DL, Construction
- Crawler Excavators
TOROMONT CAT (QUÉBEC)
Canada

Caterpillar 325DL, Construction
- Crawler Excavators
MANTRAC NIGERIA LIMITED
Nigeria

55,681

Caterpillar 325DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France

129,000

Caterpillar 325DL, Construction
- Crawler Excavators
MICHIGAN CAT

91,600

Caterpillar 325DL, Construction
- Crawler Excavators
ZIEGLER CAT