AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY S/N LAL1-UP Type 1 AN ATTACHMENT 325D L EXCAVATOR


IMPLEMENTS
ACTUATOR GP
WORK TOOLS
BUCKET GP

EXCAVATOR 325D L EXCAVATOR LAL
 325D L Excavator LAL00001-UP (MACHINE) POWERED BY C7 Engine SEBP5222 325D L LAL   (2007)

IMPLEMENTS

ACTUATOR GP
ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
 

#SEBP52220710
 

275-4873: ACTUATOR GP-CLAMSHELL

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY
S/N LAL1-UP
Type 1
AN ATTACHMENT
i02710980 SEBP5222
2754873 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-8011 [2] CAP-PROTECTION  
2. 8X-7933 [1] SPACER (33X57X14-MM THK)  
3. 119-2378 [2] SUPPORT AS  
4. 145-4488 [1] TUBE AS  
5. 145-5836 [1] BRACKET  
6. 145-7053 I [2] HOSE AS  
7. 200-5670 [2] CONNECTOR AS  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  [1] CONNECTOR  
8. 290-9756 CH [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
9. 290-9757 CH [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0184 [1] VALVE-RELIEF  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
10. 231-9164 J [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 276-3404 [1] CHANNEL  
12. 289-8717 [1] BRACKET  
13. 289-9027 [1] BRACKET  
14. 1P-3703 [3] SEAL-RECTANGULAR  
15. 6V-0400 [4] FLANGE-HALF  
16. 6V-9172 [2] NUT (1-7/16-12-THD)  
17. 7X-2572 M [1] BOLT (M24X3X35-MM)  
18. 7Y-3732 [2] CLIP  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
22. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
28. 9X-2199 M [1] BOLT (M30X3.5X50-MM)  
29. 3V-9744 [2] SPACER  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  239-3483 J [1] KIT-REPAIR (QUICK DISCONNECT)  
    (INCLUDES O-RINGS, VALVE SEALS, ELASTIC RINGS & BACKUP RING)
  290-9759 H [1] KIT-SEAL (SELECTOR VALVE)  
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H SERVICES PART(S) MARKED H
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP52220711
 

275-4873: ACTUATOR GP-CLAMSHELL

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY
S/N LAL1-UP
Type 2
AN ATTACHMENT
i03151475 SEBP5222
2754873 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-8011 [2] CAP-PROTECTION  
2. 8X-7933 C [2] SPACER (33X57X14-MM THK)  
3. 119-2378 [2] SUPPORT AS  
4. 145-4488 [1] TUBE AS  
5. 145-5836 [1] BRACKET  
6. 145-7053 I [2] HOSE AS  
7. 200-5670 [2] CONNECTOR AS  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  [1] CONNECTOR  
8. 290-9756 H [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
9. 290-9757 H [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0184 [1] VALVE-RELIEF  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
10. 231-9164 J [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 166-5495 C [1] CHANNEL  
12. 289-8717 [1] BRACKET  
13. 289-9027 [1] BRACKET  
14. 1P-3703 [3] SEAL-RECTANGULAR  
15. 6V-0400 [4] FLANGE-HALF  
16. 6V-9172 [2] NUT (1-7/16-12-THD)  
17. 326-7298 C [1] PIN AS  
18. 7Y-3732 [2] CLIP  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 326-7295 C [1] PIN AS  
21. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
22. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
28. 7X-7900 CM [1] BOLT (M30X3.5X50-MM)  
29. 3V-9744 [2] SPACER  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  239-3483 J [1] KIT-REPAIR (QUICK DISCONNECT)  
    (INCLUDES O-RINGS, VALVE SEALS, ELASTIC RINGS & BACKUP RING)
  290-9759 H [1] KIT-SEAL (SELECTOR VALVE)  
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H SERVICES PART(S) MARKED H
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP52220712
 

250-6418: ADJUSTER GP-BUCKET

250-6418 ADJUSTER GP-BUCKET -CB-FAMILY
S/N LAL1-UP
PART OF 257-5463, 257-5464, 257-5465, 257-5466, 257-5467, 257-5468, 257-5469, 257-5470, 257-5471, 257-5472, 257-5473, 257-5474, 257-5475, 270-8857, 282-8751, 346-0831 BUCKET & ADJUSTER GP
AN ATTACHMENT
i02413667 SEBP5222
2506418 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5974 [1] PIN  
2. 087-5975 B [4] SHIM (0.5-MM THK)  
3. 087-5976 B [6] SHIM (1-MM THK)  
4. 134-8950 [1] PLATE  
5. 250-6417 [1] FLANGE  
6. 8T-4193 M [6] BOLT (M16X2X50-MM)  
7. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP52220713
 

250-6430: ADJUSTER GP-BUCKET

250-6430 ADJUSTER GP-BUCKET -DB-FAMILY
S/N LAL1-UP
PART OF 270-1282, 270-1283, 270-1284, 270-1285, 270-1286, 270-1292, 270-1295, 270-1303, 270-1304, 270-1307, 270-1309, 270-1310, 270-1312, 270-1313 BUCKET & ADJUSTER GP
AN ATTACHMENT
i02421903 SEBP5222
2506430 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-6605 B [6] SHIM (1-MM THK)  
2. 4I-6604 B [4] SHIM (0.5-MM THK)  
3. 4I-6626 [1] PIN  
4. 134-8951 [1] PLATE  
5. 7X-2563 M [5] BOLT (M20X2.5X60-MM)  
6. 8T-4123 [5] WASHER (3.62X5.75X0.375-MM THK)  
7. 250-6457 [1] FLANGE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP52220714
 

257-5463: BUCKET & ADJUSTER GP

257-5463 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N LAL1-UP
750-MM (30-IN) WIDE X 0.67-CU M (0.9-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 3
AN ATTACHMENT
i02410856 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5476 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52220715
 

257-5464: BUCKET & ADJUSTER GP

257-5464 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N LAL1-UP
1250-MM (49-IN) WIDE X 1.3-CU M (1.7-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 4
AN ATTACHMENT
i02411304 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5477 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52220716
 

257-5465: BUCKET & ADJUSTER GP

257-5465 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N LAL1-UP
1300-MM (51.2-IN) WIDE X 1.35-CU M (1.8-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
i02413746 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5478 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52220717
 

257-5466: BUCKET & ADJUSTER GP

257-5466 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N LAL1-UP
1350-MM (53-IN) WIDE X 1.42-CU M (1.9-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
i02413911 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5479 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52220718
 

257-5467: BUCKET & ADJUSTER GP

257-5467 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N LAL1-UP
1400-MM (55-IN) WIDE X 1.48-CU M (1.9-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
i02414227 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5480 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52220719
 

257-5468: BUCKET & ADJUSTER GP

257-5468 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N LAL1-UP
1500-MM (59-IN) WIDE X 1.6-CU M (2-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
i02415724 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5481 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 325D L :

ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
STICK GP-HOE
290-9296 STICK GP-HOE
STICK GP-HOE
290-9290 STICK GP-HOE
STICK GP-HOE
290-9278 STICK GP-HOE
STICK GP-HOE
290-9269 STICK GP-HOE
290-1812 STICK AR-HOE
290-1810 STICK AR-HOE
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ADJUSTER GP-BUCKET
250-6418 ADJUSTER GP-BUCKET
ADJUSTER GP-BUCKET
250-6430 ADJUSTER GP-BUCKET
257-5463 BUCKET & ADJUSTER GP
257-5464 BUCKET & ADJUSTER GP
257-5465 BUCKET & ADJUSTER GP
257-5466 BUCKET & ADJUSTER GP
257-5467 BUCKET & ADJUSTER GP

Truck sale:

 
62,927 
Caterpillar 325DL, Construction
- Crawler Excavators
TOROMONT CAT (QUÉBEC)
Canada
Caterpillar 325DL, Construction
 
Caterpillar 325DL, Construction
- Crawler Excavators
MANTRAC NIGERIA LIMITED
Nigeria
Caterpillar 325DL, Construction
55,681 
Caterpillar 325DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 325DL, Construction
129,000 
Caterpillar 325DL, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 325DL, Construction
91,600 
Caterpillar 325DL, Construction
- Crawler Excavators
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.