AVSPARE.COM
parts catalog

231-1768 INSTALLATION GP-RADIO S/N LAL1-UP CANNOT BE USED WITH @@@@@251-0538@@@@@ AN ATTACHMENT 325D L




OPERATOR STATION

RADIO GP
 

#SEBP52220950
 

231-1768: INSTALLATION GP-RADIO

231-1768 INSTALLATION GP-RADIO
S/N LAL1-UP
CANNOT BE USED WITH @@@@@251-0538@@@@@
AN ATTACHMENT
i02112821 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [9] STRAP-CABLE  
2. 7K-1181 [8] STRAP-CABLE  
3. 324-5770 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
4. 234-1124 [1] HARNESS AS-RADIO  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [18] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [15] STRAP-CABLE  
  8T-8737 [10] PLUG-SEAL  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  231-2295 [2] PLUG AS-CONNECTOR (8-PIN)  
    (EACH INCLUDES)
  264-7033 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
5. 238-1463 [1] RECEPTACLE GP-CONNECTOR (8-PIN)  
  8T-8737 [8] PLUG-SEAL  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
6. 238-2216 [1] SWITCH AS-ROCKER (RADIO MUTE)  
  167-3543 [5] TERMINAL (MALE)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
7. 8T-4171 M [4] BOLT (M6X1X12-MM)  
8. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP52220951
 

164-0528: LEVER GP-CAB DOOR

164-0528 LEVER GP-CAB DOOR
S/N LAL1-UP
PART OF 256-7414 CAB GP
AN ATTACHMENT
i02430902 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-6642 [1] LEVER AS  
2. 164-0664 [1] BRACKET  
3. 176-1941 [1] PIN  
4. 185-8280 [1] WASHER-WAVE (10.5X15X0.3-MM THK)  
5. 185-8281 [1] SPRING  
 

#SEBP52220952
 

229-9071: LINES GP-AIR CONDITIONER

229-9071 LINES GP-AIR CONDITIONER
S/N LAL1-UP
PART OF 286-0152 CHASSIS AR
Type 1
i02296063 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-9605 [2] TUBE  
    -OR-
  6P-8855 [2] SPACER-TUBE  
2. 122-9657 [2] CLAMP  
3. 176-1902 [1] DRYER AS-REFRIGERANT (RECEIVER)  
4. 235-8891 [1] PLATE  
5. 235-9014 [8] CLAMP-SPRING  
    -OR-
  5D-1026 [8] CLAMP-BAND  
6. 235-9015 [2] HOSE  
7. 245-7913 [1] TUBE AS  
  121-7138 [2] SEAL-O-RING  
8. 104-3173 [5] CLIP  
9. 121-7098 [1] BRACKET AS  
  8T-4138 M [2] BOLT (M6X1X20-MM)  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
10. 130-0252 [2] HOSE-DRAIN  
11. 1S-0994 [1] CLIP (LOOP)  
12. 235-8854 [1] HOSE AS  
  121-7138 [2] SEAL-O-RING  
  196-1665 [1] SWITCH AS-PRESSURE (REFRIGERANT)  
  185-8293 [1] SEAL-O-RING  
13. 245-7800 [1] HOSE AS  
  121-7136 [2] SEAL-O-RING  
  245-7851 [1] CAP  
14. 245-7912 [1] HOSE AS  
  121-7137 [2] SEAL-O-RING  
  245-7850 [1] CAP  
15. 2M-9780 [1] SEAL-O-RING  
16. 3K-0360 [3] SEAL-O-RING  
17. 3S-2093 [1] STRAP-CABLE  
18. 4I-3503 [1] GROMMET  
19. 5P-2369 [1] CLIP  
20. 6D-1641 [1] CLIP (LOOP)  
21. 6D-4246 [1] CLIP (LOOP)  
22. 6V-3265 [1] CLIP  
23. 6V-7238 [2] VALVE-SHUTOFF  
24. 6V-7357 M [3] BOLT (M6X1X25-MM)  
25. 273-5156 [1] ADAPTER  
26. 7Y-8165 [1] GROMMET  
27. 7Y-8167 [1] GROMMET (50-MM ID)  
28. 8M-2773 [2] CLIP (LOOP)  
29. 8T-1715 [1] ADAPTER  
30. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
32. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
33. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
34. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4971 M [3] BOLT (M6X1X30-MM)  
36. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
37. 5P-0767 E HOSE (310-CM EACH)  
38. 107-1678 E GUARD (13-CM)  
39. 7K-1181 [2] STRAP-CABLE  
40. 293-1135 E GUARD (15-CM)  
41. 8T-4971 M [1] BOLT (M6X1X30-MM)  
    -OR-
  7X-2533 M [1] BOLT (M6X1X35-MM)  
42. 132-5789 [1] CLIP (LADDER)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP52220953
 

229-9071: LINES GP-AIR CONDITIONER

229-9071 LINES GP-AIR CONDITIONER
S/N LAL1-UP
PART OF 286-0152, 323-3846 CHASSIS AR
Type 2
i07137358 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-9605 [2] TUBE  
    -OR-
  6P-8855 [2] SPACER-TUBE  
2. 122-9657 [2] CLAMP  
3. 176-1902 [1] DRYER AS-REFRIGERANT (RECEIVER)  
4. 235-8891 [1] PLATE  
5. 235-9014 [8] CLAMP-SPRING  
    -OR-
  5D-1026 [8] CLAMP-BAND  
6. 235-9015 [2] HOSE  
7. 245-7913 [1] TUBE AS  
  121-7138 [2] SEAL-O-RING  
8. 104-3173 [5] CLIP  
9. 121-7098 [1] BRACKET AS  
  8T-4138 M [2] BOLT (M6X1X20-MM)  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
10. 130-0252 [2] HOSE-DRAIN  
11. 1S-0994 [1] CLIP (LOOP)  
12. 235-8854 [1] HOSE AS  
  121-7138 [2] SEAL-O-RING  
  196-1665 [1] SWITCH AS-PRESSURE (REFRIGERANT)  
  185-8293 [1] SEAL-O-RING  
13. 245-7800 [1] HOSE AS  
  121-7136 [2] SEAL-O-RING  
  245-7851 [1] CAP  
14. 305-0358 C [1] HOSE AS  
  121-7137 [2] SEAL-O-RING  
  245-7850 [1] CAP  
15. 2M-9780 [1] SEAL-O-RING  
16. 3K-0360 [3] SEAL-O-RING  
17. 3S-2093 [1] STRAP-CABLE  
18. 4I-3503 [1] GROMMET  
19. 5P-2369 [1] CLIP  
20. 6D-1641 [1] CLIP (LOOP)  
21. 6D-4246 [1] CLIP (LOOP)  
22. 6V-3265 [1] CLIP  
23. 6V-7238 [2] VALVE-SHUTOFF  
24. 6V-7357 M [3] BOLT (M6X1X25-MM)  
25. 273-5156 [1] ADAPTER  
26. 7Y-8165 [1] GROMMET  
27. 7Y-8167 [1] GROMMET (50-MM ID)  
28. 8M-2773 [2] CLIP (LOOP)  
29. 8T-1715 [1] ADAPTER  
30. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4137 CM [10] BOLT (M10X1.5X20-MM)  
32. 8T-4191 CM [1] BOLT (M10X1.5X16-MM)  
33. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
34. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4971 M [3] BOLT (M6X1X30-MM)  
36. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
37. 5P-0767 E HOSE (310-CM EACH)  
38. 107-1678 E GUARD (13-CM)  
39. 7K-1181 [2] STRAP-CABLE  
40. 293-1135 E GUARD (15-CM)  
41. 8T-4971 M [1] BOLT (M6X1X30-MM)  
    -OR-
  7X-2533 M [1] BOLT (M6X1X35-MM)  
42. 132-5789 [1] CLIP (LADDER)  
43. 305-0357 C [1] TUBE AS  
  121-7137 [1] SEAL-O-RING  
44. 305-0441 [2] BAND-MARKER (HS)  
45. 305-0442 [2] BAND-MARKER (HR)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP52220954
 

229-9071: LINES GP-AIR CONDITIONER

229-9071 LINES GP-AIR CONDITIONER
S/N LAL258-UP
PART OF 323-3846 CHASSIS AR
i03655483 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-0442 [2] BAND-MARKER (HR)  
2. 122-9657 [2] CLAMP  
3. 176-1902 [1] DRYER AS-REFRIGERANT (RECEIVER)  
4. 235-8891 [1] PLATE  
5. 235-9014 C [4] CLAMP-SPRING  
    -OR-
  5D-1026 C [4] CLAMP-BAND  
7. 245-7913 [1] TUBE AS  
  121-7138 [2] SEAL-O-RING  
8. 104-3173 [5] CLIP  
9. 121-7098 [1] BRACKET AS  
  8T-4138 M [2] BOLT (M6X1X20-MM)  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
10. 130-0252 [2] HOSE-DRAIN  
11. 1S-0994 [1] CLIP (LOOP)  
12. 235-8854 [1] HOSE AS  
  121-7138 [2] SEAL-O-RING  
  196-1665 [1] SWITCH AS-PRESSURE (REFRIGERANT)  
  185-8293 [1] SEAL-O-RING  
13. 245-7800 [1] HOSE AS  
  245-7851 [1] CAP  
  121-7136 [2] SEAL-O-RING  
14. 305-0358 [1] HOSE AS  
  245-7850 [1] CAP  
  121-7137 [2] SEAL-O-RING  
15. 2M-9780 [1] SEAL-O-RING  
16. 3K-0360 [3] SEAL-O-RING  
17. 3S-2093 [1] STRAP-CABLE  
18. 4I-3503 [1] GROMMET  
19. 5P-2369 [1] CLIP  
20. 6D-1641 [1] CLIP (LOOP)  
21. 6D-4246 [1] CLIP (LOOP)  
22. 6V-3265 [1] CLIP  
23. 6V-7238 [2] VALVE-SHUTOFF  
24. 6V-7357 M [3] BOLT (M6X1X25-MM)  
25. 273-5156 [1] ADAPTER  
26. 7Y-8165 [1] GROMMET  
27. 7Y-8167 [1] GROMMET (50-MM ID)  
28. 8M-2773 [2] CLIP (LOOP)  
29. 8T-1715 [1] ADAPTER  
30. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
32. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
33. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
34. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4971 M [3] BOLT (M6X1X30-MM)  
36. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
37. 5P-0767 CE HOSE (320-CM EACH)  
38. 107-1678 E GUARD (13-CM)  
39. 7K-1181 [2] STRAP-CABLE  
40. 293-1135 E GUARD (15-CM)  
41. 8T-4971 M [1] BOLT (M6X1X30-MM)  
    -OR-
  7X-2533 M [1] BOLT (M6X1X35-MM)  
42. 132-5789 [1] CLIP (LADDER)  
43. 305-0357 [1] TUBE AS  
  121-7137 [1] SEAL-O-RING  
44. 305-0441 [2] BAND-MARKER (HS)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP52220955
 

7Y-0059: LITERATURE GP

7Y-0059 LITERATURE GP
S/N LAL1-UP
PART OF 286-0152, 323-3846 CHASSIS AR
i00422802 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  099-3645 [1] CABLE-LANYARD  
  5P-8500 [2] KEY  
  5P-7958 [2] SLEEVE-CABLE SPLICE  
  364-8522 [1] TAG-WARNING (TIPPING HAZARD, READ OMM)  
    (ATTACH TO JOYSTICK WHEN MACHINE IS TRANSPORTED WITHOUT FRONT (BOOM) STRUCTURE OR COUNTERWEIGHT)
 

#SEBP52220956
 

142-3836: MIRROR GP-REAR VIEW

142-3836 MIRROR GP-REAR VIEW
S/N LAL1-UP
PART OF 286-0152, 323-3846 CHASSIS AR
i01236008 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7971 [4] WASHER-HARD (13.5X25.5X5-MM THK)  
2. 4I-8135 [1] MIRROR  
3. 165-3065 [1] BRACKET-MIRROR  
4. 177-6315 [4] PLUG  
5. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
  M   METRIC PART
 

#SEBP52220957
 

327-6550: MIRROR GP-REAR VIEW

327-6550 MIRROR GP-REAR VIEW
S/N LAL1-UP
PART OF 256-7414 CAB GP
AN ATTACHMENT
i03114210 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3487 M [2] BOLT-SOCKET HEAD (M6X1X20-MM)  
2. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP52220958
 

221-8813: MONITOR & MTG GP-OPERATOR

221-8813 MONITOR & MTG GP-OPERATOR
S/N LAL1-UP
PART OF 264-4287 CAB GP
Type 1
AN ATTACHMENT
i02391925 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-2193 CY [1] MONITOR GP-OPERATOR  
2. 9X-2046 M [3] SCREW-TRUSS HEAD (M6X1X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52220959
 

221-8813: MONITOR & MTG GP-OPERATOR

221-8813 MONITOR & MTG GP-OPERATOR
S/N LAL1-UP
PART OF 264-4287 CAB GP
Type 2
AN ATTACHMENT
i03382720 SEBP5222
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 327-7482 CY [1] MONITOR GP-OPERATOR  
2. 9X-2046 M [3] SCREW-TRUSS HEAD (M6X1X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 325D L :

Truck sale:

 
62,927 
Caterpillar 325DL, Construction
- Crawler Excavators
TOROMONT CAT (QUÉBEC)
Canada
 
Caterpillar 325DL, Construction
- Crawler Excavators
MANTRAC NIGERIA LIMITED
Nigeria
55,681 
Caterpillar 325DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
129,000 
Caterpillar 325DL, Construction
- Crawler Excavators
MICHIGAN CAT
91,600 
Caterpillar 325DL, Construction
- Crawler Excavators
ZIEGLER CAT
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.