AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

344-2149 CYLINDER HEAD GP S/N THX22638-UP PART OF 345-8414, 384-5590 CYLINDER HEAD GP 330D L EXCAVATOR


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-ACCESSORY
DRIVE GP-FAN
CYLINDER HEAD GP
DAMPER GP
HOUSING GP-FRONT

EXCAVATOR 330D L EXCAVATOR LRM
 330D L Excavator LRM00001-UP (MACHINE) POWERED BY C9 Engine SEBP5223 330D L LRM   (2007)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
CYLINDER HEAD GP
344-2149 CYLINDER HEAD GP
CYLINDER HEAD GP
345-8414 CYLINDER HEAD GP
CYLINDER HEAD GP
384-5590 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
213-4363 FASTENER GP-CYLINDER HEAD
 

#SEBP52230030
 

344-2149: CYLINDER HEAD GP

344-2149 CYLINDER HEAD GP
S/N THX22638-UP
PART OF 345-8414, 384-5590 CYLINDER HEAD GP
i03671309 SEBP5223
3442149 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2715 [24] LOCK-RETAINER (INLET)  
2. 2A-4429 [24] LOCK-RETAINER (EXHAUST)  
3. 163-2478 [12] SEAL-VALVE STEM (EXHAUST)  
4. 190-6115 [12] SPRING-VALVE (INNER)  
5. 190-6117 [12] SPRING-VALVE (OUTER)  
6. 211-2134 [12] RETAINER  
7. 217-0609 [6] SEAT-VALVE SPRING  
8. 490-1723 [12] VALVE-EXHAUST  
9. 241-8384 [12] RETAINER  
10. 241-8386 [12] SPRING-VALVE (INNER)  
11. 241-8385 [12] SPRING-VALVE (OUTER)  
12. 241-8387 [6] SEAT  
13. 241-8390 [12] SEAL-VALVE STEM  
14. 490-1726 [12] VALVE-INLET  
15. 259-5829 [12] GUIDE-VALVE (STANDARD, INTAKE)  
  254-3941 AB GUIDE-VALVE (0.13-MM OS)  
  254-3942 AB GUIDE-VALVE (0.5-MM OS)  
16. 260-4856 [12] GUIDE-VALVE (STANDARD, EXHAUST)  
  203-3237 AB GUIDE-VALVE (0.13-MM OS, EXHAUST)  
  203-3238 AB GUIDE-VALVE (0.5-MM OS, EXHAUST)  
17. 332-3619 Y [1] CYLINDER HEAD AS  
18. 319-6237 [2] PLUG AS  
    (EACH INCLUDES)
  228-7096 [1] SEAL-O-RING  
  271-7442 [1] PLUG  
19. 389-3708 [6] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
20. 396-0405 [2] PLUG AS  
    (EACH INCLUDES)
  6V-6609 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
21. 8T-6757 [2] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP52230031
 

345-8414: CYLINDER HEAD GP

345-8414 CYLINDER HEAD GP
S/N THX22638-UP
PART OF 348-2746 ENGINE AR-CORE
i03670929 SEBP5223
3458414 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-3746 [1] PLUG-CUP  
2. 187-1315 [1] GASKET AS  
3. 344-2149 Y [1] CYLINDER HEAD GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP52230032
 

384-5590: CYLINDER HEAD GP

384-5590 CYLINDER HEAD GP
S/N THX39051-UP
PART OF 384-3426 ENGINE AR-CORE
i04742035 SEBP5223
3845590 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-3746 [1] PLUG-CUP  
2. 187-1315 [1] GASKET AS  
3. 213-4363 Y [1] FASTENER GP-CYLINDER HEAD  
4. 344-2149 Y [1] CYLINDER HEAD GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP52230033
 

165-4557: DAMPER & PULLEY GP

165-4557 DAMPER & PULLEY GP
S/N THX7500-UP; THY1915-UP
PROVIDES VISCOUS DAMPER W/8 GROOVE POLY-RIB PULLEY
PART OF 290-0760 ENGINE AR-COMPLETE
i01308764 SEBP5223
1654557 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7381 [1] PLATE-CLAMP  
2. 167-8121 [1] DAMPER AS  
3. 153-1036 [1] PULLEY-CRANKSHAFT  
4. 8T-3666 M [4] BOLT (M14X2X60-MM)  
  M   METRIC PART
 

#SEBP52230034
 

241-7605: DRIVE GP-ACCESSORY

241-7605 DRIVE GP-ACCESSORY
S/N THX7500-UP; THY1915-UP
PART OF 290-0760 ENGINE AR-COMPLETE
i02404830 SEBP5223
2417605 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 189-2449 [1] SUPPORT  
2. 190-0643 [1] BELT TENSIONER GP  
3. 197-9642 [1] PULLEY AS-IDLER (8-GROOVE)  
4. 241-7604 [1] BRACKET  
5. 183-4494 [1] BELT-SERPENTINE  
6. 6E-5102 [1] PLATE  
7. 6V-5218 M [4] BOLT (M8X1.25X35-MM)  
8. 6V-5839 [7] WASHER (11X21X2.5-MM THK)  
9. 6V-5842 M [6] BOLT (M10X1.5X40-MM)  
10. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
11. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP52230035
 

137-3750: DRIVE GP-FAN

137-3750 DRIVE GP-FAN
S/N LRM1-554
PART OF 230-2899 FAN GP-SUCTION
i01619686 SEBP5223
1373750 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-3746 [1] SHAFT  
2. 137-3751 [1] SEAL-LIP TYPE  
3. 200-3311 C [1] HOUSING  
4. 4B-3665 [2] BALL BEARING  
5. 137-3749 [2] SPACER (45X53X10-MM THK)  
6. 6V-5590 [1] RING-RETAINING  
8. 095-7424 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP52230036
 

295-9439: DRIVE GP-FAN

295-9439 DRIVE GP-FAN
S/N LRM555-UP
PART OF 230-2899 FAN GP-SUCTION
i03325241 SEBP5223
2959439 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-3746 [1] SHAFT  
2. 129-7925 [1] SEAL-LIP TYPE  
3. 200-3311 [1] HOUSING  
4. 4B-3665 [2] BALL BEARING  
5. 137-3749 [2] SPACER (45X53X10-MM THK)  
6. 6V-5590 [1] RING-RETAINING  
7. 095-7424 [1] RING-RETAINING  
 

#SEBP52230037
 

213-4363: FASTENER GP-CYLINDER HEAD

213-4363 FASTENER GP-CYLINDER HEAD
S/N THX7500-UP; THY1-UP
PART OF 384-5590 CYLINDER HEAD GP, 270-4216, 348-2746 ENGINE AR-CORE
i02747988 SEBP5223
2134363 FASTENER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 290-6884 C [26] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  9X-8268 [1] WASHER (17.5X30X3.5-MM THK)  
  263-2915 M [1] BOLT-12 POINT HEAD (M16X2X180-MM)  
2. 8C-4984 M [5] BOLT (M8X1.25X150-MM)  
3. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP52230038
 

218-0859: FASTENER GP-DAMPER & PULLEY

218-0859 FASTENER GP-DAMPER & PULLEY
S/N THX7500-UP; THY1915-UP
PART OF 290-0760 ENGINE AR-COMPLETE
i02178303 SEBP5223
2180859 FASTENER GP-DAMPER & PULLEY Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-3621 [1] SPACER (101.5X167X8-MM THK)  
2. 6V-4249 M [8] BOLT (M10X1.5X50-MM)  
  M   METRIC PART
 

#SEBP52230039
 

116-4556: FASTENER GP-FRONT HOUSING

116-4556 FASTENER GP-FRONT HOUSING
S/N THX7500-UP; THY1915-UP
PART OF 290-0760 ENGINE AR-COMPLETE
CANNOT BE USED WITH FRONT ENGINE SUPPORT
i00483857 SEBP5223
1164556 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8336 M [6] BOLT (M12X1.75X70-MM)  
  5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Engine Valve Lash - Check
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Technical Information Bulletin
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
Disassembly and Assembly
Rocker Arm and Shaft - Remove
C9 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C9 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
C9 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C9 Engines for Caterpillar Built Machines
Cylinder Head - Install
C9 Engines for Caterpillar Built Machines
Service Magazine
A New Plug Assembly Is Used on the Cylinder Head of Certain Machines Engines {1100}
2013/03/08
A New Intake Valve Is Now Used {1100}
2009/11/05

Caterpillar Parts SIS Catalog 330D L :

CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
CYLINDER HEAD GP
242-0672 CYLINDER HEAD GP
CYLINDER HEAD AS
332-3619 CYLINDER HEAD AS
CYLINDER HEAD AS
311-7229 CYLINDER HEAD AS
CYLINDER HEAD AS
252-8438 CYLINDER HEAD AS
CYLINDER BLOCK GP
161-3406 CYLINDER BLOCK GP
CYLINDER HEAD GP
345-8414 CYLINDER HEAD GP
CYLINDER HEAD GP
384-5590 CYLINDER HEAD GP
DAMPER & PULLEY GP
165-4557 DAMPER & PULLEY GP
DRIVE GP-ACCESSORY
241-7605 DRIVE GP-ACCESSORY
DRIVE GP-FAN
137-3750 DRIVE GP-FAN
DRIVE GP-FAN
295-9439 DRIVE GP-FAN
FASTENER GP-CYLINDER HEAD
213-4363 FASTENER GP-CYLINDER HEAD
FASTENER GP-DAMPER & PULLEY
218-0859 FASTENER GP-DAMPER & PULLEY

Truck sale:

Caterpillar 330DL, Construction
130,000 
Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY
 
 
Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 330DL, Construction
56,700 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 330DL, Construction
 
Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana
Caterpillar 330DL, Construction
73,710 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.