251-0432 WIRING GP-CAB S/N LRM1-480 PART OF 229-9072 OPERATOR AR 330D L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 251-0432 WIRING GP-
1. 251-0432 WIRING GP-
2. 251-0613 WIRING GP-
3. 259-5118 WIRING GP-
4. 267-7642 WIRING GP-
5. 267-7748 WIRING GP-
6. 267-7803 WIRING GP-
7. 267-7803 WIRING GP-
8. 267-7804 WIRING GP-
9. 231-1836 WIRING GP-
0. INFORMATION

EXCAVATOR 330D L EXCAVATOR LRM
330D L Excavator LRM00001-UP (MACHINE) POWERED BY C9 Engine SEBP5223 330D L LRM (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

259-4963 WIRING GP-AUXILIARY CONTROL

251-0619 WIRING GP-BOOM FLOAT

251-0432 WIRING GP-CAB

251-0613 WIRING GP-CAB

259-5118 WIRING GP-CAB

#SEBP52230250

251-0432: WIRING GP-CAB

WIRING GP-CAB

251-0432 WIRING GP-CAB
S/N LRM1-480
PART OF 229-9072 OPERATOR AR

i02305579 SEBP5223

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	6C-9058 M	[1]	SCREW (M6X1X12-MM)
3.	6C-9081	[2]	LOCKWASHER
4.	6C-9121	[1]	BRACKET AS-LAMP
5.	6C-9122	[2]	LAMP (24-VOLT)(DOME LIGHT)
6.	7K-1181	[14]	STRAP-CABLE
7.	102-8016	[1]	RESISTOR AS (BACKUP)(BACKUP)
8.	113-8490	[21]	FUSE (10-AMPERE)
9.	113-8491	[6]	FUSE (15-AMPERE)
10.	113-8493	[3]	FUSE (25-AMPERE)
11.	120-4779	[8]	HOOK
12.	132-1829 Y	[1]	ALARM GP (24-VOLT)(FAULT)
13.	141-2759	[8]	FUSE (5-AMPERE)
14.	161-3128	[1]	RELAY (24-VOLT)(BOOM FLOODLIGHT)
14A.	161-3128	[1]	RELAY (24-VOLT)(CHASSIS LIGHT)
14B.	161-3128	[1]	RELAY (24-VOLT)(CAB FLOODLIGHT)
14C.	161-3128	[1]	RELAY (24-VOLT)(HORN)
14D.	161-3128	[1]	RELAY (24-VOLT)(NEUTRAL START)
14E.	161-3128	[1]	RELAY (24-VOLT)(TRAVEL ALARM)
14F.	161-3128	[1]	RELAY (24-VOLT)(ETHER)
15.	268-1964	[1]	KIT-SERVICE METER
			(INCLUDES METER & FILM)
16.	163-6758	[1]	WIRE AS
17.	167-3593	[1]	STRAP
18.	170-6888	[1]	PULLER-FUSE
19.	188-7681	[1]	CONTROL GP-WIPER (WASHER)
20.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(MAIN RELAY)
21.	220-6420	[8]	SCREW
22.	227-7575	[1]	PANEL-CONTROL (SWITCH)
23.	234-1097	[1]	BRACKET
24.	238-2212	[1]	SWITCH AS-ROCKER (FINE SWING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[1]	TERMINAL (MALE)
25.	238-2318	[1]	LIGHTER AS-CIGAR (24-VOLT)
26.	238-2390	[1]	CABLE AS (RED)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	125-7876 BE		TUBE-HEAT SHRINK (17.78-MM DIA)
27.	238-2391	[1]	CABLE AS (PURPLE)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	125-7876 BE		TUBE-HEAT SHRINK (17.78-MM DIA)
28.	251-0637	[1]	INSULATION
29.	275-8651	[1]	HARNESS AS-CAB
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[110]	STRAP-CABLE
	6T-6506	[2]	TERMINAL-BLADE (14-GA TO 18-GA)
	7Y-3951	[6]	TERMINAL-BLADE (14-GA)
	7Y-3952	[3]	PLUG-CONNECTOR (2-PIN)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8737	[33]	PLUG-SEAL
	5P-6271	[1]	CONNECTOR AS
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	102-7964	[2]	PLUG-CONNECTOR (16-PIN)
	102-7965	[68]	TERMINAL (FEMALE)
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	121-1022	[2]	DIODE
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[13]	TERMINAL (MALE)
	125-4841	[2]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	9X-3402	[15]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[15]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8065	[3]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8066	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
	2L-8067	[6]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	128-8950	[1]	CONNECTOR-RECEPTACLE
	2L-8075	[5]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	176-9299	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[1]	SEAL
	9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[12]	PIN-CONNECTOR (14-GA TO 16-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[16]	TERMINAL-BLADE (16-GA TO 20-GA)
	149-5071	[8]	TERMINAL-BLADE (12-GA TO 14-GA)
	153-2602	[5]	RECEPTACLE-CONNECTOR (1-PIN)
	153-2631	[5]	TERMINAL (14-GA TO 20-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	163-6659	[1]	CONNECTOR-PLUG (12-PIN)
	163-6699	[1]	CONNECTOR-PLUG (18-PIN)
	163-6790	[23]	TERMINAL (FEMALE)
	163-6803	[6]	PLUG-CONNECTOR (5-PIN)
	167-3487	[6]	WEDGE-PLUG LOCK (5-PIN)
	170-6890	[5]	TERMINAL-BLADE (14-GA)
	170-6891	[22]	TERMINAL-BLADE (16-GA TO 18-GA)
	174-3016	[2]	PLUG AS-CONNECTOR (3-PIN)
	179-9046	[2]	TERMINAL (14-GA TO 20-GA)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	238-2319	[1]	BASE AS (FUSE, RELAY PANEL)
	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	095-0742 M	[2]	SCREW-MACHINE (M6X1X16-MM)
	170-9394	[40]	TERMINAL
	238-2363	[6]	TERMINAL (FEMALE)
	238-2366	[10]	TERMINAL (MALE)
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
30.	096-5962	[3]	WASHER-HARD (3.4X7X0.8-MM THK)
31.	096-6166	[3]	WASHER-HARD (4.5X9X1-MM THK)
32.	124-3548	[2]	FUSE (30-AMPERE)
33.	132-5789	[7]	CLIP (LADDER)
34.	150-6256 M	[3]	BOLT-SOCKET HEAD (M3X0.5X12-MM)
35.	259-5022	[1]	ANTENNA AS
	259-5081	[1]	ROD
	259-5082	[1]	CABLE AS
36.	263-9441	[2]	SPEAKER AS
37.	4P-7581	[1]	CLIP (LADDER)
38.	6C-9198 M	[2]	BOLT (M5X0.8X15-MM)
39.	6V-9672 M	[2]	SCREW-MACHINE (M4X0.7X16-MM)
40.	6V-9673 M	[1]	SCREW-MACHINE (M5X0.8X12-MM)
41.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
42.	8T-0337 M	[1]	SCREW-MACHINE (M4X0.7X12-MM)
43.	8T-4127 M	[2]	SCREW-MACHINE (M5X0.8X20-MM)
44.	9D-6886	[8]	CLAMP
45.	9X-2042 M	[13]	SCREW-TRUSS HEAD (M6X1X12-MM)
46.	9X-2044 M	[5]	SCREW-TRUSS HEAD (M6X1X16-MM)
47.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
48.	101-2846 E	[3]	GUARD (9.5-CM EACH)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP52230251

251-0432: WIRING GP-CAB

WIRING GP-CAB

251-0432 WIRING GP-CAB
S/N LRM481-UP
PART OF 229-9072 OPERATOR AR

i03112520 SEBP5223

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	6C-9058 M	[1]	SCREW (M6X1X12-MM)
3.	6C-9081	[2]	LOCKWASHER
4.	6C-9121	[1]	BRACKET AS-LAMP
5.	6C-9122	[2]	LAMP (24-VOLT)(DOME LIGHT)
6.	7K-1181	[14]	STRAP-CABLE
7.	102-8016	[1]	RESISTOR AS (BACKUP)(BACKUP)
8.	113-8490	[21]	FUSE (10-AMPERE)
9.	113-8491	[6]	FUSE (15-AMPERE)
10.	113-8493	[3]	FUSE (25-AMPERE)
11.	120-4779	[8]	HOOK
12.	132-1829 Y	[1]	ALARM GP (24-VOLT)(FAULT)
13.	141-2759	[8]	FUSE (5-AMPERE)
14.	161-3128	[1]	RELAY (24-VOLT)(BOOM FLOODLIGHT)
14A.	161-3128	[1]	RELAY (24-VOLT)(CHASSIS LIGHT)
14B.	161-3128	[1]	RELAY (24-VOLT)(CAB FLOODLIGHT)
14C.	161-3128	[1]	RELAY (24-VOLT)(HORN)
14D.	161-3128	[1]	RELAY (24-VOLT)(NEUTRAL START)
14E.	161-3128	[1]	RELAY (24-VOLT)(TRAVEL ALARM)
14F.	161-3128	[1]	RELAY (24-VOLT)(ETHER)
15.	268-1964	[1]	KIT-SERVICE METER
			(INCLUDES METER & FILM)
16.	163-6758	[1]	WIRE AS
17.	167-3593	[1]	STRAP
18.	170-6888	[1]	PULLER-FUSE
19.	328-0651 C	[1]	CONTROL GP-WIPER
20.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(MAIN RELAY)
21.	220-6420	[8]	SCREW
22.	227-7575	[1]	PANEL-CONTROL (SWITCH)
23.	234-1097	[1]	BRACKET
24.	238-2212	[1]	SWITCH AS-ROCKER (FINE SWING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[1]	TERMINAL (MALE)
25.	238-2318	[1]	LIGHTER AS-CIGAR (24-VOLT)
26.	238-2390	[1]	CABLE AS (RED)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	125-7876 BE		TUBE-HEAT SHRINK (17.78-MM DIA)
27.	238-2391	[1]	CABLE AS (PURPLE)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	125-7876 BE		TUBE-HEAT SHRINK (17.78-MM DIA)
28.	251-0637	[1]	INSULATION
29.	275-8651	[1]	HARNESS AS-CAB
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[110]	STRAP-CABLE
	6T-6506	[2]	TERMINAL-BLADE (14-GA TO 18-GA)
	7Y-3951	[6]	TERMINAL-BLADE (14-GA)
	7Y-3952	[3]	PLUG-CONNECTOR (2-PIN)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8737	[33]	PLUG-SEAL
	5P-6271	[1]	CONNECTOR AS
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	102-7964	[2]	PLUG-CONNECTOR (16-PIN)
	102-7965	[68]	TERMINAL (FEMALE)
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	121-1022	[2]	DIODE
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[13]	TERMINAL (MALE)
	125-4841	[2]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	9X-3402	[15]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[15]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8065	[3]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8066	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
	2L-8067	[6]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	128-8950	[1]	CONNECTOR-RECEPTACLE
	2L-8075	[5]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	176-9299	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[1]	SEAL
	9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[12]	PIN-CONNECTOR (14-GA TO 16-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[16]	TERMINAL-BLADE (16-GA TO 20-GA)
	149-5071	[8]	TERMINAL-BLADE (12-GA TO 14-GA)
	153-2602	[5]	RECEPTACLE-CONNECTOR (1-PIN)
	153-2631	[5]	TERMINAL (14-GA TO 20-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	163-6659	[1]	CONNECTOR-PLUG (12-PIN)
	163-6699	[1]	CONNECTOR-PLUG (18-PIN)
	163-6790	[23]	TERMINAL (FEMALE)
	163-6803	[6]	PLUG-CONNECTOR (5-PIN)
	167-3487	[6]	WEDGE-PLUG LOCK (5-PIN)
	170-6890	[5]	TERMINAL-BLADE (14-GA)
	170-6891	[22]	TERMINAL-BLADE (16-GA TO 18-GA)
	174-3016	[2]	PLUG AS-CONNECTOR (3-PIN)
	179-9046	[2]	TERMINAL (14-GA TO 20-GA)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	238-2319	[1]	BASE AS (FUSE, RELAY PANEL)
	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	095-0742 M	[2]	SCREW-MACHINE (M6X1X16-MM)
	170-9394	[40]	TERMINAL
	238-2363	[6]	TERMINAL (FEMALE)
	238-2366	[10]	TERMINAL (MALE)
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
30.	096-5962	[3]	WASHER-HARD (3.4X7X0.8-MM THK)
31.	096-6166	[3]	WASHER-HARD (4.5X9X1-MM THK)
32.	124-3548	[2]	FUSE (30-AMPERE)
33.	132-5789	[7]	CLIP (LADDER)
34.	150-6256 M	[3]	BOLT-SOCKET HEAD (M3X0.5X12-MM)
35.	259-5022	[1]	ANTENNA AS
	259-5081	[1]	ROD
	259-5082	[1]	CABLE AS
36.	263-9441	[2]	SPEAKER AS
37.	4P-7581	[1]	CLIP (LADDER)
38.	6C-9198 M	[2]	BOLT (M5X0.8X15-MM)
39.	6V-9672 M	[2]	SCREW-MACHINE (M4X0.7X16-MM)
40.	6V-9673 M	[1]	SCREW-MACHINE (M5X0.8X12-MM)
41.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
42.	8T-0337 M	[1]	SCREW-MACHINE (M4X0.7X12-MM)
43.	8T-4127 M	[2]	SCREW-MACHINE (M5X0.8X20-MM)
44.	9D-6886	[8]	CLAMP
45.	9X-2042 M	[13]	SCREW-TRUSS HEAD (M6X1X12-MM)
46.	9X-2044 M	[5]	SCREW-TRUSS HEAD (M6X1X16-MM)
47.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
48.	101-2846 E	[3]	GUARD (9.5-CM EACH)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP52230252

251-0613: WIRING GP-CAB

WIRING GP-CAB

251-0613 WIRING GP-CAB -BOOM FLOAT
S/N LRM1-UP
PART OF 264-8478 HYDRAULIC AR-BOOM FLOAT
AN ATTACHMENT

i02389061 SEBP5223

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[14]	STRAP-CABLE
2.	149-5050	[1]	RELAY (24-VOLT)(BOOM FLOAT, DISABLE)
2A.	149-5050	[1]	RELAY (24-VOLT)(SMARTBOOM, DOWN)
2B.	149-5050	[1]	RELAY (24-VOLT)(SMARTBOOM, UP/DOWN)
3.	238-2214	[1]	SWITCH AS-ROCKER (BOOM FLOAT)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[5]	TERMINAL (MALE)
4.	238-2215	[1]	SWITCH AS-ROCKER (OVERLOAD WARNING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[4]	TERMINAL (MALE)
5.	251-0614	[1]	HARNESS AS-SENSOR (BOOM FLOAT)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[27]	STRAP-CABLE
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	8T-8737	[1]	PLUG-SEAL
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	149-5051	[3]	CONNECTOR-RECEPTACLE
	149-5069	[5]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[8]	TERMINAL-BLADE (16-GA TO 20-GA)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	230-5008	[2]	PLUG AS-CONNECTOR (4-PIN)
			(EACH INCLUDES)
	264-7031	[1]	SEAL-CONNECTOR
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
6.	5C-2890 M	[3]	NUT (M6X1-THD)
7.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP52230253

259-5118: WIRING GP-CAB

WIRING GP-CAB

259-5118 WIRING GP-CAB -PRIMING PUMP
S/N LRM1-UP
PART OF 247-7501 PUMP GP-FUEL PRIMING
AN ATTACHMENT

i02301750 SEBP5223

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[9]	STRAP-CABLE
3.	149-5050	[1]	RELAY (24-VOLT)(PRIMING PUMP)
4.	259-5119	[1]	HARNESS AS-CAB
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[2]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	149-5051	[1]	CONNECTOR-RECEPTACLE
	149-5069	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[2]	TERMINAL-BLADE (16-GA TO 20-GA)
	170-6891	[1]	TERMINAL-BLADE (16-GA TO 18-GA)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
5.	5C-2890 M	[1]	NUT (M6X1-THD)
6.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#SEBP52230254

267-7642: WIRING GP-CAB

WIRING GP-CAB

267-7642 WIRING GP-CAB -COUPLER
S/N LRM1-UP
PART OF 268-6821 CONTROL AR-COUPLER
AN ATTACHMENT

i02390036 SEBP5223

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[13]	STRAP-CABLE
2.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK PRIORITY)
2A.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK ON)
2B.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK)
2C.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK)
3.	259-4884	[1]	BRACKET AS
4.	259-7220	[1]	COVER
5.	267-7644	[1]	HARNESS AS-QUICK COUPLER
	102-7965	[3]	TERMINAL (FEMALE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	149-5070	[9]	TERMINAL-BLADE (16-GA TO 20-GA)
	163-6803	[1]	PLUG-CONNECTOR (5-PIN)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
	149-5069	[7]	TERMINAL-BLADE (14-GA TO 20-GA)
	3S-2093	[15]	STRAP-CABLE
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
6.	267-7671	[1]	SWITCH GP-TOGGLE (QUICK COUPLER)
	105-5175	[1]	SWITCH AS-TOGGLE (QUICK COUPLER)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
	267-7672	[1]	HARNESS AS-WIRING
	3S-2093	[1]	STRAP-CABLE
	121-1173	[3]	TERMINAL (MALE)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
7.	267-7676	[1]	BRACKET AS
8.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP52230255

267-7748: WIRING GP-CHASSIS

WIRING GP-CHASSIS

267-7748 WIRING GP-CHASSIS
S/N LRM1-UP
PART OF 268-6821 CONTROL AR-COUPLER
AN ATTACHMENT

i02390033 SEBP5223

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[21]	STRAP-CABLE
2.	7K-1181	[22]	STRAP-CABLE
3.	204-1611	[2]	STRAP (DUAL)
4.	267-7830	[1]	HARNESS AS-QUICK COUPLER
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
5.	4P-7581	[1]	CLIP (LADDER)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP52230256

267-7803: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N LRM1-306
PART OF 264-8552 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i02470671 SEBP5223

2677803 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[8]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
5.	091-9035	[1]	SPACER (11X25X20-MM THK)
6.	116-0118	[3]	CLIP
7.	259-4887	[1]	HARNESS AS-WIRING (PRODUCT LINK)
	3S-2093	[2]	STRAP-CABLE
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	230-5010	[2]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
8.	259-4940	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
9.	267-7813	[1]	HARNESS AS-CONTROL (PRODUCT LINK, ANTENNA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
10.	111-4837	[1]	CLIP
11.	132-5789	[2]	CLIP (LADDER)
12.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
14.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
15.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
16.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART

#SEBP52230257

267-7803: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N LRM307-UP
PART OF 264-8552 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i02885661 SEBP5223

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[8]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
6.	116-0118	[3]	CLIP
7.	259-4887	[1]	HARNESS AS-WIRING (PRODUCT LINK)
	3S-2093	[2]	STRAP-CABLE
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	230-5010	[2]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
8.	259-4940	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
9.	267-7813	[1]	HARNESS AS-CONTROL (PRODUCT LINK, ANTENNA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
10.	111-4837	[1]	CLIP
11.	132-5789	[2]	CLIP (LADDER)
12.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 CM	[2]	BOLT (M10X1.5X25-MM)
15.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
16.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP52230258

267-7804: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-7804 WIRING GP-COMMUNICATION -PRODUCT LINK 121SR
S/N LRM1-UP
PART OF 264-8553 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i02437758 SEBP5223

2677804 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[8]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
6.	116-0118	[2]	CLIP
7.	259-4940	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
8.	267-7813	[1]	HARNESS AS-CONTROL (PRODUCT LINK, ANTENNA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
9.	132-5789	[1]	CLIP (LADDER)
10.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
	091-9035	[1]	SPACER (11X25X20-MM THK)
			-OR-
	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
12.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART

#SEBP52230259

231-1836: WIRING GP-CONSOLE

WIRING GP-CONSOLE

231-1836 WIRING GP-CONSOLE -LH
S/N LRM1-UP
PART OF 251-0433 WIRING GP-CONSOLE

i02171878 SEBP5223

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[1]	STRAP-CABLE
3.	163-6795	[2]	STRAP-CABLE
4.	251-0580	[1]	HARNESS AS-CONSOLE
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[9]	STRAP-CABLE
	5P-5995 D		TUBE (0.3-M)
	7Y-3963	[2]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[2]	TUBE (RECEPTACLE TERMINAL)
	8T-8737	[9]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[11]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Battery or Battery Cable - Inspect/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Battery - Recycle
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

SmartBoom Operation - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

SmartBoom Control - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Power Receptacle - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Fuses - Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

Procedure to Retrofit 330D, 336D and 340D Excavators with L5 Controls{1408, 5057, 7610, 7620}
Procedure to Retrofit 330D, 336D and 340D Excavators with L5 Controls{1408, 5057, 7610, 7620}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE WIPER CONTROL ON VARIOUS 312C, 312D, 315C, 315D, 318C, 319C, 319D, 320C, 322C, 323D, 324D, 325C, 325D, 330C, 330D, 345C, 345D, 365C, AND 385C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WIPER CONTROL ON VARIOUS 312C, 312D, 315C, 315D, 318C, 319C, 319D, 320C, 322C, 323D, 324D, 325C, 325D, 330C, 330D, 345C, 345D, 365C, AND 385C EXCAVATORS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Technical Information Bulletin

Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Testing and Adjusting

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
330D and 336D Excavators Hydraulic System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Installation Procedures are Available to Add A Second Electronic Relief Valve {1408, 5051, 5057, 5069}
2008/05/12

An Improved Wiper Control Gp is Now Used {1408, 7301}
2008/08/25

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/02/16