AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

339-2034 WIRING GP-GRADE CONTROL S/N WBN1-UP PART OF 339-2019, 339-2021 MAST GP 320D LN EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 320D LN EXCAVATOR WBN
 320D LN Excavator WBN00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP5227 320D LN WBN   (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-ELECTRONIC CONTROL
296-4665 WIRING GP-ELECTRONIC CONTROL
339-2034 WIRING GP-GRADE CONTROL
WIRING GP-HEATER
306-8690 WIRING GP-HEATER
WIRING GP-HEATER
319-1358 WIRING GP-HEATER
WIRING GP-OVERLOAD WARNING
328-0394 WIRING GP-OVERLOAD WARNING
 

#SEBP52270200
 

339-2034: WIRING GP-GRADE CONTROL

339-2034 WIRING GP-GRADE CONTROL
S/N WBN1-UP
PART OF 339-2019, 339-2021 MAST GP
i03695565 SEBP5227
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6V-8212 M [2] BOLT (M10X1.5X16-MM)  
  292-0305 [1] HARNESS AS-WIRING (MAST)  
  8T-8737 [5] PLUG-SEAL  
  9X-3402 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  116-0118 [2] CLIP  
  263-6699 [1] CONNECTOR-RECEPTACLE (STORAGE)  
  3L-8187 [4] LOCKWASHER  
  3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
  3S-2093 [4] STRAP-CABLE  
  7K-1181 [8] STRAP-CABLE  
  8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
  M   METRIC PART
 

#SEBP52270201
 

306-8690: WIRING GP-HEATER

306-8690 WIRING GP-HEATER
S/N WBN1-273
PART OF 298-4274 CHASSIS AR
i02815002 SEBP5227
3068690 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 116-0118 [1] CLIP  
3. 306-8691 [1] HARNESS AS-SOLENOID (HEATER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  E   ORDER BY THE CENTIMETER
 

#SEBP52270202
 

319-1358: WIRING GP-HEATER

319-1358 WIRING GP-HEATER
S/N WBN1-UP
FIELD INSTALLATION
i02955403 SEBP5227
3191358 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 7K-1181 [5] STRAP-CABLE  
3. 116-0114 [1] SWITCH AS-MAGNETIC (24-VOLT)(HEATER RELAY)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
4. 197-4330 [1] CONTROLLER-AIR (HEATER)  
5. 238-2324 [1] CABLE AS  
  6V-2369 [1] CABLE (4-GA, BLACK)  
  131-1478 [2] TERMINAL AS  
    (EACH INCLUDES)
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  125-7876 TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM EACH)  
6. 238-2325 [1] CABLE AS  
  6V-2369 [1] CABLE (4-GA, BLACK)  
  131-1478 [2] TERMINAL AS  
    (EACH INCLUDES)
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  125-7876 TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM EACH)  
7. 319-1344 [1] BRACKET AS  
8. 319-1346 [1] COVER AS  
9. 319-1348 [1] HARNESS AS-CONTROL (ENGINE START, PUMP CONTROL)(HEATER)  
10. 5C-2890 M [2] NUT (M6X1-THD)  
11. 7X-2619 M [2] BOLT (M6X1X10-MM)  
12. 8T-4171 M [2] BOLT (M6X1X12-MM)  
13. 8T-4970 M [2] BOLT (M6X1X14-MM)  
14. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP52270203
 

328-0394: WIRING GP-OVERLOAD WARNING

328-0394 WIRING GP-OVERLOAD WARNING
S/N WBN1-UP
PART OF 314-3856 WARNING AR-OVERLOAD
AN ATTACHMENT
i03318761 SEBP5227
3280394 WIRING GP-OVERLOAD WARNING Parts scheme
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [15] STRAP-CABLE  
2. 7K-1181 [1] STRAP-CABLE  
3. 116-0118 [1] CLIP  
4. 328-0028 [1] SWITCH AS-ROCKER (OVERLOAD WARNING)(OVERLOAD WARNING)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [4] TERMINAL (MALE)  
5. 328-0395 [1] HARNESS AS-SENSOR (OVERLOAD WARNING)  
 

#SEBP52270204
 

275-7003: WIRING GP-PLATFORM

275-7003 WIRING GP-PLATFORM
S/N WBN1-UP
PART OF 273-5387, 327-6568 OPERATOR AR
i02562765 SEBP5227
2757003 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [16] STRAP-CABLE  
4. 111-4836 [4] CLIP  
5. 111-4838 [2] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [14] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 388-6817 [1] HARNESS AS-PLATFORM  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [29] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [27] STRAP-CABLE  
  8T-8737 [57] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [15] TERMINAL (FEMALE)  
  9W-0852 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [35] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [33] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM)  
  9X-3402 [65] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [65] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8050 [2] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [2] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  2L-8052 [2] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [2] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [25] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [25] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  155-2270 [12] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [3] DIODE  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  455-0709 [1] SEAL-CONNECTOR  
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
    (EACH INCLUDES)
  455-0707 [1] SEAL-CONNECTOR  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [6] TERMINAL (MALE)  
  239-7352 [1] PLUG AS-CONNECTOR (6-PIN)  
  455-0707 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [4] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
11. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 3E-5169 [1] GUARD-SWITCH  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP52270205
 

283-2741: WIRING GP-QUICK COUPLER

283-2741 WIRING GP-QUICK COUPLER
S/N WBN1-UP
PART OF 282-5830 CONTROL AR-COUPLER
AN ATTACHMENT
i02817605 SEBP5227
2832741 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [11] STRAP-CABLE  
2. 7I-2673 [1] STRAP-CABLE  
3. 7K-1181 [9] STRAP-CABLE  
4. 116-0118 [1] CLIP  
5. 283-2775 [1] HARNESS AS-SOLENOID  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUGE AS, WEDGE & INTERFACE SEAL)
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
6. 132-5789 [1] CLIP  
7. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
8. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
 

#SEBP52270206
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N WBN1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT
i02213964 SEBP5227
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 238-1593 [1] WIRE AS  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52270207
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N WBN1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT
i03087780 SEBP5227
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52270208
 

227-6035: DRIVE GP-FINAL

227-6035 DRIVE GP-FINAL -WITHOUT MOTOR
S/N WBN1-254
PART OF 227-6913 DRIVE GP-FINAL
i01845871 SEBP5227
2276035 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
2. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
11. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
12. 7Y-0223 [3] SHAFT-PLANETARY  
13. 094-1542 [6] BEARING-ROLLER  
14. 7Y-1431 [3] GEAR-PLANETARY (30-TEETH)  
15. 094-1528 [6] WASHER (53X84X1-MM THK)  
16. 095-0891 [6] PIN-SPRING  
17. 6I-6585 [3] GEAR-PLANETARY (44-TEETH)  
18. 094-0616 [3] BEARING AS-ROLLER  
19. 3E-2338 [2] PLUG-PIPE  
20. 7M-8485 [2] SEAL-O-RING  
21. 7Y-1426 [1] COVER  
22. 7Y-0225 [3] SHAFT-PLANETARY  
23. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
24. 094-0580 [1] PLATE (10-MM THK)  
25. 6I-6583 [1] GEAR-SUN (13-TEETH)  
26. 7Y-1430 [1] GEAR-SUN (17-TEETH)  
27. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
28. 7Y-1432 [1] CARRIER  
29. 7X-2568 M [16] BOLT (M20X2.5X180-MM)  
30. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
31. 1U-8846 B SEALANT-GASKET  
33. 148-4705 [1] GEAR-RING (104-TEETH)  
34. 7Y-1433 [1] CARRIER  
35. 6D-0692 [1] SEAL-O-RING  
36. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
37. 114-1539 [6] PIN-DOWEL  
38. 191-3235 [1] HOUSING  
39. 168-8451 [2] BALL BEARING  
40. 114-1497 [1] SEAL GP-DUO-CONE  
41. 191-3236 [1] HOUSING  
42. 095-1270 M [2] SETSCREW-SOCKET (M12X1.75X30-MM)  
43. 148-4708 [1] GEAR-RING (79-TEETH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP52270209
 

227-6913: DRIVE GP-FINAL

227-6913 DRIVE GP-FINAL -WITH MOTOR
S/N WBN1-254
PART OF 227-6167 POWER TRAIN AR
i02562484 SEBP5227
  For full view, you need register

Parts for your 320D LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  227-6035 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  215-9982 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Systems Operation
Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Troubleshooting
MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Caterpillar Parts SIS Catalog 320D LN :

WIRING GP-ELECTRONIC CONTROL
296-4665 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-CONVERTER
251-0485 WIRING GP-CONVERTER
WIRING GP-CONVERTER
251-0482 WIRING GP-CONVERTER
WIRING GP-CONSOLE
251-0435 WIRING GP-CONSOLE
251-0433 WIRING GP-CONSOLE
WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
267-7886 WIRING GP-COMMUNICATION
WIRING GP-HEATER
306-8690 WIRING GP-HEATER
WIRING GP-HEATER
319-1358 WIRING GP-HEATER
WIRING GP-OVERLOAD WARNING
328-0394 WIRING GP-OVERLOAD WARNING
WIRING GP-PLATFORM
275-7003 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
283-2741 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
227-6035 DRIVE GP-FINAL

Truck sale:

 
USD $101,352 
2011 CAT 320D LN

MyTractor
TENERIFE, ??, Spain
 
$98,400 USD 
CATERPILLAR 320DLN 2011
- TRACK EXCAVATORS
TEKNOXGROUP S.A.
Switzerland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.