AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

242-6759 CYLINDER & SEAL GP-BUCKET S/N BZP1-UP 120-MM (4.7-IN) BORE X 1104-MM (43.5-IN) STROKE PART OF 242-6758 CYLINDER & LINES GP-BUCKET 320D


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 320D EXCAVATOR BZP
 320D Excavator BZP00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP5228 320D BZP   (2007)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-BOOM
242-6746 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BOOM
364-0933 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BUCKET
242-6759 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
364-0939 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-STICK
242-6748 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
364-0936 CYLINDER & SEAL GP-STICK
 

#SEBP52280280
 

242-6759: CYLINDER & SEAL GP-BUCKET

242-6759 CYLINDER & SEAL GP-BUCKET
S/N BZP1-UP
120-MM (4.7-IN) BORE X 1104-MM (43.5-IN) STROKE
PART OF 242-6758 CYLINDER & LINES GP-BUCKET
i02838310 SEBP5228
2426759 CYLINDER & SEAL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-0729 J [1] SEAL-LIP TYPE  
2. 154-0731 J [1] RING-BACKUP  
3. 154-0730 J [1] SEAL-U-CUP  
4. 154-0732 J [1] SEAL-BUFFER  
5. 096-4402 [1] BUSHING  
6. 094-0747 [1] RING-RETAINING  
7. 177-2611 [1] HEAD  
8. 8T-1447 M [12] BOLT-SOCKET HEAD (M16X2X70-MM)  
9. 095-1717 J [1] SEAL-O-RING  
10. 096-3964 J [1] RING-BACKUP  
11. 247-8886 [1] CYLINDER AS  
11A. 235-7769 [1] BUSHING  
12. 247-8887 [1] ROD AS  
12A. 241-7382 [1] BUSHING  
13. 4I-3615 J [2] RING-BACKUP  
14. 096-7803 J [1] SEAL AS  
15. 247-8865 J [2] RING  
16. 086-0255 J [2] RING  
17. 247-8885 [1] PISTON  
18. 096-3216 M [1] SETSCREW-SOCKET (M12X1.75X12-MM)  
19. 3D-2891 [1] BALL  
20. 166-1494 [2] SEAL-LIP TYPE  
21. 235-7679 [2] SEAL-LIP TYPE  
22. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  266-7892 J [1] KIT-SEAL (HYDRAULIC CYLINDER)(BUCKET)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP52280281
 

364-0939: CYLINDER & SEAL GP-BUCKET

364-0939 CYLINDER & SEAL GP-BUCKET
S/N BZP1-UP
PART OF 364-0938 CYLINDER & LINES GP-BUCKET
i05037152 SEBP5228
3640939 CYLINDER & SEAL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 166-1494 [2] SEAL-LIP TYPE  
3. 364-0940 Y [1] CYLINDER GP-BUCKET  
4. 235-7679 [2] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52280282
 

242-6748: CYLINDER & SEAL GP-STICK

242-6748 CYLINDER & SEAL GP-STICK
S/N BZP1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 242-6747 CYLINDER & LINES GP-STICK
i02838247 SEBP5228
2426748 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-0736 J [1] SEAL-LIP TYPE  
2. 154-0738 J [1] RING-BACKUP  
3. 154-0737 J [1] SEAL-U-CUP  
4. 154-0739 J [1] SEAL-BUFFER  
5. 096-5625 [1] BUSHING  
6. 094-1931 [1] RING-RETAINING  
7. 188-4181 [1] HEAD  
8. 4I-3628 M [12] BOLT-SOCKET HEAD (M18X2.5X80-MM)  
9. 095-1721 J [1] SEAL-O-RING  
10. 4I-3627 J [1] RING-BACKUP  
11. 247-8876 [1] CYLINDER AS  
11A. 241-7381 [1] BUSHING  
12. 247-8877 [1] ROD AS  
12A. 241-7381 [1] BUSHING  
13. 4I-8869 [1] STOP  
14. 126-1876 J [1] RING-SEAL  
15. 4I-3631 J [2] RING-BACKUP  
16. 096-1570 J [1] SEAL AS  
17. 247-8874 J [2] RING  
18. 096-1571 J [2] RING  
19. 247-8873 [1] PISTON  
20. 096-6210 M [1] SETSCREW-SOCKET (M14X2X14-MM)  
21. 4B-9880 [1] BALL  
22. 085-8605 [1] RING-RETAINING  
23. 194-8359 J [1] RING-SEAL  
24. 121-1549 [1] STOP  
25. 085-8604 [2] RING-RETAINING  
26. 166-1494 [4] SEAL-LIP TYPE  
27. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  259-0775 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP52280283
 

364-0936: CYLINDER & SEAL GP-STICK

364-0936 CYLINDER & SEAL GP-STICK
S/N BZP1-UP
PART OF 364-0935 CYLINDER & LINES GP-STICK
i04710409 SEBP5228
3640936 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 364-0937 Y [1] CYLINDER GP-HYDRAULIC  
3. 166-1494 [4] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52280284
 

364-0934: CYLINDER GP-BOOM

364-0934 CYLINDER GP-BOOM
S/N BZP1-UP
120-MM (4.7-IN) BORE X 1260-MM (49.6-IN) STROKE
PART OF 364-0933 CYLINDER & SEAL GP-BOOM
i04710309 SEBP5228
3640934 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 247-8789 J [1] RING-SEAL  
2. 7Y-5116 J [1] RING  
3. 355-5820 J [1] SEAL-U-CUP  
4. 7Y-5119 [1] RING-RETAINING  
5. 9X-3592 J [1] SEAL AS  
6. 147-5835 M [1] LOCKNUT-SPECIAL  
7. 087-5507 [1] STOP  
8. 355-5818 J [1] SEAL-BUFFER  
9. 126-2043 [1] HEAD  
10. 158-9062 [1] PISTON  
11. 323-3820 [1] CYLINDER AS  
11A. 241-7379 [1] BUSHING  
12. 289-7929 [1] ROD AS  
12A. 241-7380 [1] BUSHING  
13. 364-0952 J [1] SEAL-LIP TYPE  
14. 179-9674 J [1] RING  
15. 087-5510 J [1] RING  
16. 095-1717 J [1] SEAL-O-RING  
17. 114-0756 [1] BUSHING  
18. 158-9063 J [2] RING  
19. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  397-9294 J [1] KIT-SEAL (BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP52280285
 

364-0940: CYLINDER GP-BUCKET

364-0940 CYLINDER GP-BUCKET
S/N BZP1-UP
120-MM (4.7-IN) BORE X 1104-MM (43.5-IN) STROKE
PART OF 364-0939 CYLINDER & SEAL GP-BUCKET
i05037190 SEBP5228
3640940 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-5116 J [1] RING  
2. 7Y-5119 [1] RING-RETAINING  
3. 9X-3592 J [1] SEAL AS  
4. 147-5835 M [1] LOCKNUT-SPECIAL  
5. 126-2043 [1] HEAD  
6. 158-9062 [1] PISTON  
7. 364-0952 J [1] SEAL-LIP TYPE  
8. 179-9674 J [1] RING  
9. 247-8751 [1] ROD AS  
9A. 241-7382 [1] BUSHING  
10. 289-7949 [1] CYLINDER AS  
10A. 235-7769 [1] BUSHING  
11. 355-5818 J [1] SEAL-BUFFER  
12. 087-5510 J [1] RING  
13. 095-1717 J [1] SEAL-O-RING  
14. 114-0756 [1] BUSHING  
15. 158-9063 J [2] RING  
16. 355-5820 J [1] SEAL-U-CUP  
17. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  397-9294 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP52280286
 

364-0937: CYLINDER GP-HYDRAULIC

364-0937 CYLINDER GP-HYDRAULIC
S/N BZP1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 364-0936 CYLINDER & SEAL GP-STICK
i04714471 SEBP5228
3640937 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5434 [1] HEAD  
2. 123-2060 M [1] LOCKNUT (M80X2-THD)  
3. 158-9064 [1] PISTON  
4. 158-9065 J [2] RING  
5. 179-9667 J [1] RING  
6. 377-6019 J [1] SEAL-U-CUP  
7. 289-7934 [1] CYLINDER AS  
7A. 241-7381 [1] BUSHING  
8. 289-7937 [1] ROD AS  
8A. 241-7381 [1] BUSHING  
9. 247-8791 J [1] RING-SEAL  
10. 377-6022 J [1] SEAL-BUFFER  
11. 087-5431 [1] STOP  
12. 087-5436 J [1] RING-BACKUP  
13. 093-1572 [1] RING-RETAINING  
14. 095-0929 [2] RING-RETAINING  
15. 095-1632 J [1] SEAL-O-RING  
16. 096-2665 J [1] RING-BACKUP  
17. 103-8378 [1] RING-RETAINING  
18. 103-8379 [1] RING  
19. 103-8380 [1] STOP  
20. 114-0757 [1] BUSHING  
21. 364-0955 J [1] SEAL-LIP TYPE  
22. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
23. 9X-3598 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  398-1900 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP52280287
 

148-4644: DRIVE GP-SWING

148-4644 DRIVE GP-SWING -WITHOUT MOTOR
S/N BZP1-UP
PART OF 296-6272 DRIVE GP-SWING
i02832556 SEBP5228
1484644 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
2. 094-1509 [3] SHAFT-PLANETARY  
3. 148-4733 [3] GEAR-PLANETARY (26-TEETH)  
4. 114-1581 [1] SPACER (57.5X74X6-MM THK)  
5. 148-4732 [1] GEAR-SUN (20-TEETH)  
6. 093-1729 [2] RING-RETAINING  
7. 148-4632 [1] GEAR-SUN (23-TEETH)  
8. 191-2578 [1] CARRIER-PLANETARY  
9. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
10. 148-4637 [1] CARRIER-PLANETARY  
11. 148-4640 [1] RING-RETAINING  
12. 148-4643 [1] BEARING  
13. 095-1022 [1] BEARING-ROLLER  
14. 148-4642 [1] SEAL-O-RING  
15. 227-6228 [1] CAGE  
16. 453-3447 M [6] BOLT (M12X1.75X40-MM)  
17. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 199-4561 [2] SEAL-LIP TYPE  
19. 148-4636 [1] SHAFT-PINION  
20. 148-4638 [1] HOUSING  
21. 3K-0360 [1] SEAL-O-RING  
22. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
23. 148-4634 [3] SHAFT-PLANETARY  
24. 095-0891 [3] PIN-SPRING  
25. 148-4635 [1] GEAR-RING (73-TEETH)  
26. 148-4633 [3] GEAR-PLANETARY (25-TEETH)  
27. 7Y-0252 [6] BEARING AS-ROLLER  
28. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
29. 095-0886 [3] PIN-SPRING  
30. 094-1516 [3] BEARING-ROLLER  
31. 171-9383 [1] SPACER  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP52280288
 

296-6272: DRIVE GP-SWING

296-6272 DRIVE GP-SWING -WITH MOTOR
S/N BZP1-UP
PART OF 296-6288 DRIVE GP-SWING, 319-8355 POWER TRAIN AR
i03006463 SEBP5228
2966272 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
2. 114-1399 [1] PIPE-GAUGE  
3. 148-4644 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
4. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
5. 315-4370 Y [1] MOTOR & MTG GP-SWING  
6. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP52280289
 

296-6288: DRIVE GP-SWING

296-6288 DRIVE GP-SWING -WITH MOTOR
S/N BZP1-UP
Type 1
i03006462 SEBP5228
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  296-6272 Y [1] DRIVE GP-SWING (WITH MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING MACHINES FROM SERVICE AND INSPECTING/REPLACING CYLINDERS ON CERTAIN 320D, 321D, 324D, 325D, AND 328D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING MACHINES FROM SERVICE AND INSPECTING/REPLACING CYLINDERS ON CERTAIN 320D, 321D, 324D, 325D, AND 328D EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
The Bucket Cylinder May Cause Abnormal Noise on 320D and 323D Excavators{5457}
The Bucket Cylinder May Cause Abnormal Noise on 320D and 323D Excavators{5457}
Specifications
Boom Cylinder Lines - Right Hand
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines - Left Hand
320D and 323D Excavators Machine System Specifications
Bucket Cylinder
320D and 323D Excavators Machine System Specifications
Boom Cylinder
320D and 323D Excavators Machine System Specifications
Boom Lines
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Boom Cylinder
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING MACHINES FROM SERVICE AND INSPECTING/REPLACING CYLINDERS ON CERTAIN 320D, 321D, 324D, 325D, AND 328D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING MACHINES FROM SERVICE AND INSPECTING/REPLACING CYLINDERS ON CERTAIN 320D, 321D, 324D, 325D, AND 328D EXCAVATORS
Service Letter-Asia
Systems Operation
Cylinders (Boom, Stick and Bucket)
320D and 323D Excavators Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING MACHINES FROM SERVICE AND INSPECTING/REPLACING CYLINDERS ON CERTAIN 320D, 321D, 324D, 325D, AND 328D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING MACHINES FROM SERVICE AND INSPECTING/REPLACING CYLINDERS ON CERTAIN 320D, 321D, 324D, 325D, AND 328D EXCAVATORS
Testing and Adjusting
Cylinder Speed - Check
320D and 323D Excavators Hydraulic System
Cylinder Drift - Check - Loaded Bucket
320D and 323D Excavators Hydraulic System
Cylinder Drift - Check - Empty Bucket
320D and 323D Excavators Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove and Install
320D Excavator Machine Systems
Bucket Cylinder - Remove and Install
320D Excavator Machine Systems
Boom Cylinder - Remove and Install
320D Excavator Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18
Hydraulic Cylinder Piston Assembly for Certain 320D/320E to 329D/329E Excavators {5456, 5457, 5458}
2014/03/27
Alternative Cylinders are Available for Certain 320D and 320D2 Excavators {5457, 5458}
2014/09/09
New Implement Cylinder Rod Seals are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}
2015/06/19
New Bucket Cylinder Groups are Now Used on Certain Excavators {5457}
2014/12/09
Upgrading to Heavy Duty Cylinders and Seal Rings on Certain 320D and 320E Hydraulic Excavators {5458}
Upgrading to Heavy Duty Cylinders and Seal Rings on Certain 320D and 320E Hydraulic Excavators {5458}

Caterpillar Parts SIS Catalog 320D :

CYLINDER & SEAL GP-BOOM
364-0933 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BOOM
242-6746 CYLINDER & SEAL GP-BOOM
364-0935 CYLINDER & LINES GP-STICK
242-6747 CYLINDER & LINES GP-STICK
364-0938 CYLINDER & LINES GP-BUCKET
242-6758 CYLINDER & LINES GP-BUCKET
364-0932 CYLINDER & LINES GP-BOOM
364-0931 CYLINDER & LINES GP-BOOM
CYLINDER & SEAL GP-BUCKET
364-0939 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-STICK
242-6748 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
364-0936 CYLINDER & SEAL GP-STICK
CYLINDER GP-BOOM
364-0934 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
364-0940 CYLINDER GP-BUCKET
CYLINDER GP-HYDRAULIC
364-0937 CYLINDER GP-HYDRAULIC
DRIVE GP-SWING
148-4644 DRIVE GP-SWING
DRIVE GP-SWING
296-6272 DRIVE GP-SWING

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.