AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

361-2513 KIT-HYDRAULIC LINES -PIN GRABBER S/N WBT1-UP AN ATTACHMENT 390D L EXCAVATOR


HYDRAULIC SYSTEM
LINES GP-STICK
OPERATOR STATION
CONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
LINES GP-AUXILIARY

EXCAVATOR 390D L EXCAVATOR WBT
 390D L Excavator WBT00001-UP (MACHINE) POWERED BY C18 Engine SEBP5234 390D L WBT   (2010)

HYDRAULIC SYSTEM

LINES GP-STICK
353-9642 CYLINDER & LINES GP-STICK
355-7249 CYLINDER & LINES GP-STICK
KIT-HYDRAULIC LINES
361-2513 KIT-HYDRAULIC LINES
LINES GP-STICK
338-6166 LINES GP-STICK
LINES GP-STICK
338-6167 LINES GP-STICK
LINES GP-STICK
338-6169 LINES GP-STICK
 

#SEBP52340610
 

361-2513: KIT-HYDRAULIC LINES

361-2513 KIT-HYDRAULIC LINES -PIN GRABBER
S/N WBT1-UP
AN ATTACHMENT
i05296562 SEBP5234
3612513 KIT-HYDRAULIC LINES Parts scheme 3612513 KIT-HYDRAULIC LINES Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 4V-0611 [8] CLAMP  
3. 4V-0612 [4] PLATE  
4. 4V-0969 [4] PLATE AS  
5. 7K-1181 B [27] STRAP-CABLE  
6. 8T-8737 [2] PLUG-SEAL  
7. 123-4750 [1] VALVE AS-CHECK  
8. 149-5050 [4] RELAY (24-VOLT)  
9. 195-3064 [1] FLANGE  
10. 196-9994 [1] UNION AS  
  6V-8736 [1] UNION  
  4J-5477 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
11. 202-0691 [2] ANGLE  
12. 275-1442 [6] CLIP (TAB)  
13. 275-1443 [6] CLIP (SLOT)  
14. 333-4609 [6] GROMMET  
15. 337-2746 [1] SUPPORT AS  
16. [1] HARNESS AS-CHASSIS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [5] STRAP-CABLE  
  7Y-3966 [1] TERMINAL AS  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  149-5051 [4] CONNECTOR-RECEPTACLE  
  149-5069 [7] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [9] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
17. 356-9161 [1] SUPPORT AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
18. 356-9175 [1] SUPPORT AS  
  7Y-8763 M [2] BOSS (M10X1.5X25-MM)  
19. 363-1189 Y [1] VALVE GP-CONTROL  
20. 363-1190 I [4] HOSE AS  
21. 363-1191 I [1] HOSE AS  
22. 369-3406 I [1] HOSE AS  
23. 381-7606 Y [1] WIRING GP-CAB  
24. 118-4977 M [2] BOLT (M16X2X65-MM)  
25. 133-2116 [1] BLOCK  
26. 148-8367 [1] ELBOW AS  
  6V-9850 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
27. 148-8433 [1] TEE AS  
  6V-9836 [1] TEE-SWIVEL  
  6V-8397 [2] SEAL-O-RING  
28. 164-5570 [1] UNION AS  
  6V-8730 [1] UNION (FACE SEAL)  
  6V-8397 [2] SEAL-O-RING  
29. 1B-9575 [4] BOLT (5/16-18X1.56-IN)  
30. 323-6157 [2] COUPLING AS-PERMANENT  
31. 323-6167 [2] COUPLING AS-PERMANENT  
32. 102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
33. 3G-8047 [1] GROMMET  
34. 3G-8054 [1] CLIP (TAB)  
35. 3G-8057 [1] CLIP (SLOT)  
36. 3J-1907 [1] SEAL-O-RING  
37. 5C-9553 M [2] BOLT (M6X1X16-MM)  
38. 6V-8397 [5] SEAL-O-RING  
39. 6V-8994 [2] UNION (STRAIGHT)  
40. 6V-9168 [2] NUT (11/16-16-THD)  
41. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
43. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
44. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
45. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
48. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
49. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
50. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
51. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
52. 8T-4173 M [4] BOLT (M16X2X110-MM)  
53. 1P-3705 [1] SEAL-RECTANGULAR  
54. 4J-0524 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52340611
 

234-6613: LEVER GP-CONTROL

234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N WBT1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
i02111038 SEBP5234
2346613 LEVER GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (NEUTRAL START)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 D TUBE (0.3-M)  
4. 185-8286 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
5. 234-6615 [1] KNOB  
6. 087-4683 [2] LOCKWASHER  
7. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP52340612
 

352-6790: LINES GP-AUXILIARY HYDRAULIC

352-6790 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N WBT1-UP
HB-FAMILY
PART OF 340-4067 OPTION AR-HYDRAULIC
FOR USE WITH 5.5-M (18-FT) STICK
AN ATTACHMENT
i03909980 SEBP5234
3526790 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9217 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4085 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52340613
 

352-6791: LINES GP-AUXILIARY HYDRAULIC

352-6791 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N WBT1-UP
HB-FAMILY
PART OF 340-4065, 340-4066 OPTION AR-HYDRAULIC
FOR USE WITH 4.4-M (14.4-FT) STICK
AN ATTACHMENT
i03909977 SEBP5234
3526791 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9216 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4084 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52340614
 

352-6793: LINES GP-AUXILIARY HYDRAULIC

352-6793 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N WBT1-UP
JB-FAMILY
PART OF 340-4063, 340-4064 OPTION AR-HYDRAULIC
FOR USE WITH 3.4-M (11.2-FT) STICK
AN ATTACHMENT
i03909941 SEBP5234
3526793 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9219 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4082 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52340615
 

352-6794: LINES GP-AUXILIARY HYDRAULIC

352-6794 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N WBT1-UP
JB-FAMILY
PART OF 340-4062 OPTION AR-HYDRAULIC
FOR USE WITH 2.92-M (9.6-FT) STICK
AN ATTACHMENT
i03909936 SEBP5234
3526794 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9218 [2] TUBE AS  
3. 306-1355 [4] CLAMP-HALF  
4. 338-6209 I [2] HOSE AS  
5. 100-4982 M [4] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [32] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52340616
 

359-8631: LINES GP-AUXILIARY HYDRAULIC

359-8631 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N WBT1-UP
PART OF 340-4066, 340-4067 OPTION AR-HYDRAULIC
Type 1
AN ATTACHMENT
i03983325 SEBP5234
3598631 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [2] PLUG-PROTECTION  
2. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
3. 143-4160 [28] CLIP  
4. 146-1463 [2] CLIP (TAB)  
5. 153-8587 [6] PLATE AS  
6. 173-8065 [2] PLATE AS  
7. 173-8067 [4] CLIP  
8. 173-8069 [2] PLATE  
9. 179-5212 [10] PLATE  
10. 197-2356 [1] TUBE AS  
11. 197-2375 [2] PLATE AS  
12. 202-7153 [2] PLATE  
13. 247-9080 [1] TUBE AS  
14. 333-7055 I [2] HOSE AS  
15. 359-8671 [2] TUBE GP-HYDRAULIC (BOOM)  
    (EACH INCLUDES)
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
16. 359-8679 [2] TUBE GP-HYDRAULIC  
    (EACH INCLUDES)
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
17. 146-1461 [4] PLATE  
18. 1P-3705 [4] SEAL-RECTANGULAR  
19. 1P-3706 [4] SEAL-RECTANGULAR  
20. 5P-8077 [8] FLANGE-HALF  
21. 7X-2554 M [14] BOLT (M16X2X70-MM)  
22. 7X-2559 M [16] BOLT (M16X2X160-MM)  
23. 8T-4132 M [4] NUT (M16X2-THD)  
24. 8T-4140 M [24] BOLT (M16X2X60-MM)  
25. 8T-4193 M [36] BOLT (M16X2X50-MM)  
26. 8T-6385 M [4] BOLT (M16X2X180-MM)  
27. 9X-8257 [78] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52340617
 

359-8631: LINES GP-AUXILIARY HYDRAULIC

359-8631 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N WBT1-UP
PART OF 340-4066, 340-4067 OPTION AR-HYDRAULIC
Type 2
AN ATTACHMENT
i04452669 SEBP5234
3598631 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [2] PLUG-PROTECTION  
2. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
3. 143-4160 [28] CLIP  
4. 146-1463 [2] CLIP (TAB)  
5. 153-8587 [6] PLATE AS  
6. 173-8065 [2] PLATE AS  
7. 173-8067 [4] CLIP  
8. 173-8069 [2] PLATE  
9. 179-5212 [10] PLATE  
10. 197-2356 [1] TUBE AS  
11. 197-2375 [2] PLATE AS  
12. 202-7153 [2] PLATE  
13. 247-9080 [1] TUBE AS  
14. 333-7055 I [2] HOSE AS  
15. 359-8671 [2] TUBE GP-HYDRAULIC (BOOM)  
16. 359-8679 C [1] TUBE GP-HYDRAULIC  
17. 146-1461 [4] PLATE  
18. 1P-3705 [4] SEAL-RECTANGULAR  
19. 1P-3706 [4] SEAL-RECTANGULAR  
20. 5P-8077 [8] FLANGE-HALF  
21. 7X-2554 M [14] BOLT (M16X2X70-MM)  
22. 7X-2559 M [16] BOLT (M16X2X160-MM)  
23. 8T-4132 M [4] NUT (M16X2-THD)  
24. 8T-4140 M [24] BOLT (M16X2X60-MM)  
25. 8T-4193 M [36] BOLT (M16X2X50-MM)  
26. 8T-6385 M [4] BOLT (M16X2X180-MM)  
27. 9X-8257 [78] WASHER (17.5X30X3.5-MM THK)  
28. 372-9811 C [1] TUBE GP-HYDRAULIC  
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52340618
 

359-8631: LINES GP-AUXILIARY HYDRAULIC

359-8631 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N WBT1-UP
PART OF 340-4067 OPTION AR-HYDRAULIC
Type 3
AN ATTACHMENT
i05512436 SEBP5234
3598631 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [2] PLUG-PROTECTION  
2. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
3. 143-4160 [28] CLIP  
4. 146-1463 [2] CLIP (TAB)  
5. 153-8587 [6] PLATE AS  
6. 173-8065 [2] PLATE AS  
7. 173-8067 [4] CLIP  
8. 173-8069 [2] PLATE  
9. 179-5212 [10] PLATE  
10. 197-2356 [1] TUBE AS  
11. 197-2375 [2] PLATE AS  
12. 202-7153 [2] PLATE  
13. 247-9080 [1] TUBE AS  
14. 333-7055 I [2] HOSE AS  
15. 359-8671 [2] TUBE GP-HYDRAULIC (BOOM)  
16. 359-8679 [1] TUBE GP-HYDRAULIC  
17. 146-1461 [4] PLATE  
18. 1P-3705 [4] SEAL-RECTANGULAR  
19. 1P-3706 [4] SEAL-RECTANGULAR  
20. 5P-8077 [8] FLANGE-HALF  
21. 7X-2554 M [14] BOLT (M16X2X70-MM)  
22. 7X-2559 M [16] BOLT (M16X2X160-MM)  
23. 8T-4132 M [4] NUT (M16X2-THD)  
24. 8T-4140 CM [40] BOLT (M16X2X60-MM)  
25. 8T-4193 CM [20] BOLT (M16X2X50-MM)  
26. 8T-6385 M [4] BOLT (M16X2X180-MM)  
27. 9X-8257 C [94] WASHER (17.5X30X3.5-MM THK)  
28. 372-9811 [1] TUBE GP-HYDRAULIC  
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
29. 1P-3705 CJ [2] SEAL-RECTANGULAR  
30. 5P-0049 CJ [2] COVER  
31. 5P-8077 CJ [4] FLANGE-HALF  
32. 8T-4140 CJM [8] BOLT (M16X2X60-MM)  
33. 9X-8257 CJ [8] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   TO BE REMOVED BY CUSTOMER
  M   METRIC PART
 

#SEBP52340619
 

359-8632: LINES GP-AUXILIARY HYDRAULIC

359-8632 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N WBT1-UP
PART OF 340-4064, 340-4065 OPTION AR-HYDRAULIC
Type 1
AN ATTACHMENT
i03991209 SEBP5234
3598632 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [2] PLUG-PROTECTION  
2. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
3. 143-4160 [24] CLIP  
4. 146-1463 [2] CLIP (TAB)  
5. 153-8587 [6] PLATE AS  
6. 173-8057 [1] TUBE AS  
7. 173-8059 [2] TUBE AS  
8. 173-8065 [2] PLATE AS  
9. 173-8067 [4] CLIP  
10. 173-8069 [2] PLATE  
11. 179-5212 [8] PLATE  
12. 202-7153 [2] PLATE  
13. 245-2431 [1] TUBE AS  
14. 333-7055 I [2] HOSE AS  
15. 359-8683 [2] TUBE GP-HYDRAULIC  
    (EACH INCLUDES)
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
16. 146-1461 [4] PLATE  
17. 1P-3705 [4] SEAL-RECTANGULAR  
18. 1P-3706 [4] SEAL-RECTANGULAR  
19. 5P-8077 [8] FLANGE-HALF  
20. 7X-2554 M [14] BOLT (M16X2X70-MM)  
21. 7X-2559 M [12] BOLT (M16X2X160-MM)  
22. 8T-4132 M [4] NUT (M16X2-THD)  
23. 8T-4140 M [24] BOLT (M16X2X60-MM)  
24. 8T-4193 M [32] BOLT (M16X2X50-MM)  
25. 8T-6385 M [4] BOLT (M16X2X180-MM)  
26. 9X-8257 [70] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

Caterpillar Parts SIS Catalog 390D L :

570-1985 KIT-HYDRAULIC CYLINDER
297-0223 HYDRAULIC AR
HEAD GP-PUMP
510-2323 HEAD GP-PUMP
HEAD GP-PUMP
191-5593 HEAD GP-PUMP
GAUGE GP-SIGHT
347-6081 GAUGE GP-SIGHT
GAUGE GP-SIGHT
227-0620 GAUGE GP-SIGHT
FILTER GP-OIL
6E-5534 FILTER GP-OIL
FILTER GP-OIL
419-8528 FILTER GP-OIL
LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL
LINES GP-AUXILIARY HYDRAULIC
352-6790 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6791 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6793 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6794 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
359-8631 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
359-8631 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
359-8631 LINES GP-AUXILIARY HYDRAULIC

Truck sale:

Caterpillar 390DL, Construction
272,688 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.