AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

313-7890 DOOR GP-ACCESS -ENGINE COMPARTMENT S/N WAP1-UP PART OF 313-8122 HOOD & GUARD GP ALSO AN ATTACHMENT 390D L


FRAME AND BODY
DOOR GP
FRAME GP
GEAR & BEARING GP
GUARD GP

EXCAVATOR 390D L EXCAVATOR WAP
 390D L Excavator WAP00001-UP (MACHINE) POWERED BY C18 Engine SEBP5236 390D L WAP   (2010)

FRAME AND BODY

DOOR GP
DOOR AS-ACCESS
303-9677 DOOR AS-ACCESS
DOOR AS-ACCESS
303-9679 DOOR AS-ACCESS
DOOR AS-ACCESS
366-6447 DOOR AS-ACCESS
DOOR AS-ACCESS
366-6447 DOOR AS-ACCESS
DOOR AS-ACCESS
366-6451 DOOR AS-ACCESS
DOOR GP-ACCESS
236-9345 DOOR GP-ACCESS
DOOR GP-ACCESS
248-9358 DOOR GP-ACCESS
DOOR GP-ACCESS
248-9358 DOOR GP-ACCESS
DOOR GP-ACCESS
313-7890 DOOR GP-ACCESS
 

#SEBP52360430
 

313-7890: DOOR GP-ACCESS

313-7890 DOOR GP-ACCESS -ENGINE COMPARTMENT
S/N WAP1-UP
PART OF 313-8122 HOOD & GUARD GP
ALSO AN ATTACHMENT
i03799623 SEBP5236
3137890 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7924 [7] WASHER (4.5X40X1.2-MM THK)  
2. 6P-2216 [7] CAP (PUSH ON)  
3. 313-7891 [1] DOOR AS-ACCESS  
3A. 4I-7948 [2] HINGE AS  
3B. 4I-7949 [2] HINGE  
4. 313-7893 [1] INSULATION  
5. 101-9848 D SEAL (0.5-M)  
  D   ORDER BY THE METER
 

#SEBP52360431
 

308-8763: FRAME GP-UPPER

308-8763 FRAME GP-UPPER
S/N WAP1-291
PART OF 294-1237 CHASSIS AR
i03903252 SEBP5236
3088763 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-8850 [2] SPRING  
2. 5V-3854 [2] BUMPER  
3. 087-3765 [1] DOOR AS  
  4K-8501 [2] CLIP  
3A. 9V-3659 [1] HINGE  
4. 367-1450 [2] PIN AS  
5. 123-5362 B [2] SHIM (1-MM THK)  
6. 123-5364 B [2] SHIM (2-MM THK)  
7. 123-5574 [4] SPACER (153X210X14-MM THK)  
8. 174-8354 B [4] SHIM (0.5-MM THK)  
9. 201-2771 [4] WASHER (26X90X8-MM THK)  
10. 254-2869 [1] DOOR AS  
  4K-8501 [2] CLIP  
10A. 254-2870 [1] HINGE AS  
11. 308-8764 [1] FRAME AS-UPPER  
11A. 151-0474 [1] BOSS  
12. 330-2775 [2] PIN AS  
13. 7X-2573 M [2] BOLT (M24X3X40-MM)  
14. 7X-2574 M [2] BOLT (M24X3X45-MM)  
15. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [2] NUT (M10X1.5-THD)  
17. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
18. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-5413 M [2] STUD-WELD (M10X1.5X25-MM)  
21. 364-4977 B [2] SHIM (1-MM THK)  
22. 364-4978 B [2] SHIM (2-MM THK)  
23. 364-4979 B [4] SHIM (0.5-MM THK)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  184-5719 F [1] PLATE-SKIRT (1100-MM)  
  184-5720 F PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP52360432
 

308-8763: FRAME GP-UPPER

308-8763 FRAME GP-UPPER
S/N WAP292-UP
PART OF 294-1237, 350-9114 CHASSIS AR
ALSO AN ATTACHMENT
i04526283 SEBP5236
3088763 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-8850 [2] SPRING  
2. 5V-3854 [2] BUMPER  
3. 087-3765 [1] DOOR AS  
  4K-8501 [2] CLIP  
3A. 9V-3659 [1] HINGE  
4. 367-1450 [2] PIN AS  
5. 123-5362 B [2] SHIM (1-MM THK)  
6. 123-5364 B [2] SHIM (2-MM THK)  
7. 123-5574 [4] SPACER (153X210X14-MM THK)  
8. 174-8354 B [4] SHIM (0.5-MM THK)  
9. 201-2771 [4] WASHER (26X90X8-MM THK)  
10. 371-5495 C [1] DOOR AS-ACCESS  
  4K-8501 [2] CLIP  
10A. 254-2870 [1] HINGE AS  
11. 308-8764 [1] FRAME AS-UPPER  
11A. 151-0474 [1] BOSS  
12. 330-2775 [2] PIN AS  
13. 453-2852 M [2] BOLT (M24X3X40-MM)  
14. 453-2853 M [2] BOLT (M24X3X45-MM)  
15. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [2] NUT (M10X1.5-THD)  
17. 451-2177 [4] WASHER-HARD (26X44X4-MM THK)  
18. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-5413 M [2] STUD-WELD (M10X1.5X25-MM)  
21. 364-4977 B [2] SHIM (1-MM THK)  
22. 364-4978 B [2] SHIM (2-MM THK)  
23. 364-4979 B [4] SHIM (0.5-MM THK)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  184-5719 F [1] PLATE-SKIRT (1100-MM)  
  184-5720 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP52360433
 

308-8766: FRAME GP-UPPER

308-8766 FRAME GP-UPPER
S/N WAP1-UP
PART OF 294-1295 COUNTERWEIGHT AR
Type 1
AN ATTACHMENT
i03907298 SEBP5236
3088766 FRAME GP-UPPER Parts scheme 3088766 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-8850 [2] SPRING  
2. 4I-2509 [2] PLATE-END  
3. 5V-3854 [2] BUMPER  
4. 087-3765 [1] DOOR AS  
  4K-8501 [2] CLIP  
4A. 9V-3659 [1] HINGE  
5. 367-1450 [2] PIN AS  
6. 123-5362 B [2] SHIM (1-MM THK)  
7. 123-5364 B [2] SHIM (2-MM THK)  
8. 123-5574 [4] SPACER (153X210X14-MM THK)  
9. 126-6367 [2] SUPPORT  
10. 174-8354 B [4] SHIM (0.5-MM THK)  
11. 201-2771 [4] WASHER (26X90X8-MM THK)  
12. 254-2869 [1] DOOR AS  
  4K-8501 [2] CLIP  
12A. 254-2870 [1] HINGE AS  
13. 308-8767 [1] FRAME AS-UPPER  
13A. 151-0474 [1] BOSS  
14. 330-2775 [2] PIN AS  
15. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
16. 7X-2573 M [2] BOLT (M24X3X40-MM)  
17. 7X-2574 M [2] BOLT (M24X3X45-MM)  
18. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4133 M [2] NUT (M10X1.5-THD)  
20. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
22. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
23. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8T-5413 M [2] STUD-WELD (M10X1.5X25-MM)  
25. 364-4977 B [2] SHIM (1-MM THK)  
26. 364-4978 B [2] SHIM (2-MM THK)  
27. 364-4979 B [4] SHIM (0.5-MM THK)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  184-5719 F [1] PLATE-SKIRT (1100-MM)  
  184-5720 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP52360434
 

308-8766: FRAME GP-UPPER

308-8766 FRAME GP-UPPER
S/N WAP1-UP
PART OF 294-1295 COUNTERWEIGHT AR
Type 2
AN ATTACHMENT
i04526288 SEBP5236
3088766 FRAME GP-UPPER Parts scheme 3088766 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-8850 [2] SPRING  
2. 4I-2509 [2] PLATE-END  
3. 5V-3854 [2] BUMPER  
4. 087-3765 [1] DOOR AS  
  4K-8501 [2] CLIP  
4A. 9V-3659 [1] HINGE  
5. 367-1450 [2] PIN AS  
6. 123-5362 B [2] SHIM (1-MM THK)  
7. 123-5364 B [2] SHIM (2-MM THK)  
8. 123-5574 [4] SPACER (153X210X14-MM THK)  
9. 126-6367 [2] SUPPORT  
10. 174-8354 B [4] SHIM (0.5-MM THK)  
11. 201-2771 [4] WASHER (26X90X8-MM THK)  
12. 371-5495 C [1] DOOR AS-ACCESS  
  4K-8501 [2] CLIP  
12A. 254-2870 [1] HINGE AS  
13. 308-8767 [1] FRAME AS-UPPER  
13A. 151-0474 [1] BOSS  
14. 330-2775 [2] PIN AS  
15. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
16. 453-2852 M [2] BOLT (M24X3X40-MM)  
17. 453-2853 M [2] BOLT (M24X3X45-MM)  
18. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4133 M [2] NUT (M10X1.5-THD)  
20. 451-2177 [4] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
22. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
23. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8T-5413 M [2] STUD-WELD (M10X1.5X25-MM)  
25. 364-4977 B [2] SHIM (1-MM THK)  
26. 364-4978 B [2] SHIM (2-MM THK)  
27. 364-4979 B [4] SHIM (0.5-MM THK)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  184-5719 F [1] PLATE-SKIRT (1100-MM)  
  184-5720 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP52360435
 

227-6099: GEAR & BEARING GP-SWING

227-6099 GEAR & BEARING GP-SWING
S/N WAP1-UP
PART OF 296-6177 GEAR & BEARING GP-SWING
ALSO AN ATTACHMENT
i02442471 SEBP5236
2276099 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] RACE AS-OUTER  
2. Z [1] RACE-BEARING  
3. Z [90] ROLLER  
4. Z [68] SEPARATOR  
5. Z [22] SEPARATOR  
6. 227-6077 [1] SEAL-DUST  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 148-4685 E SEAL (537-CM)  
9. 352-7064 [1] CAP  
  E   ORDER BY THE CENTIMETER
  Z   NOT SERVICED SEPARATELY
 

#SEBP52360436
 

296-6177: GEAR & BEARING GP-SWING

296-6177 GEAR & BEARING GP-SWING
S/N WAP1-UP
PART OF 294-1302 FRAME AR-UNDERCARRIAGE, 350-9110 PARTS AR-UPPER (OEM)
ALSO AN ATTACHMENT
i03904108 SEBP5236
2966177 GEAR & BEARING GP-SWING Parts scheme 2966177 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 5K-9243 [4] ELBOW-FLARED  
3. 6I-6563 [5] CORK  
4. 7Y-1109 [1] STRIP  
5. 7Y-1110 [1] GASKET  
6. 7Y-1647 [1] GASKET  
7. 461-3894 [48] BOLT (M30X3.5X210-MM)  
8. 453-1667 [122] SPACER (31.5X56X5-MM THK)  
9. 532-0243 [74] BOLT-HEAD  
10. 199-4554 [1] TUBE AS (RH)  
11. 199-4555 [1] TUBE AS (LH)  
12. 227-6099 Y [1] GEAR & BEARING GP-SWING (90-BEARING)  
13. 296-6211 [1] RETAINER  
14. 296-6212 [1] BOOT AS  
15. 296-6213 [1] RETAINER  
16. 4N-9170 [4] CLIP (LOOP)  
17. 7Y-1095 [2] DOWEL  
18. 7Y-1648 [1] STRIP  
19. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4136 M [28] BOLT (M10X1.5X25-MM)  
21. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
22. 8T-6757 [2] PLUG-PIPE  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52360437
 

313-8053: GUARD GP-BOTTOM

313-8053 GUARD GP-BOTTOM
S/N WAP1-UP
PART OF 294-1237 CHASSIS AR
i03903302 SEBP5236
3138053 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-2853 [20] SPACER (13X38X5-MM THK)  
2. 135-8575 [52] BOLT AS  
3. 135-8576 [10] BOLT AS-LOCKING  
4. 135-8577 [20] BOLT AS  
5. 170-2942 [1] SHEET  
6. 170-2943 [1] SHEET  
7. 170-2946 [1] SHEET  
8. 170-2947 [2] SHEET  
9. 170-2948 [2] SHEET  
10. 170-2949 [1] SHEET  
11. 193-9421 [1] SHEET AS  
12. 236-9610 [1] SHEET  
13. 236-9611 [1] SHEET  
14. 236-9612 [1] SHEET  
15. 250-5093 [1] SHEET AS  
16. 313-8055 [1] SHEET AS  
17. 313-8092 [1] SHEET AS  
18. 7Y-2854 [2] SPACER (24X38X3-MM THK)  
 

#SEBP52360438
 

313-8054: GUARD GP-BOTTOM

313-8054 GUARD GP-BOTTOM
S/N WAP1-UP
PART OF 350-9114 CHASSIS AR
AN ATTACHMENT
i03947953 SEBP5236
3138054 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-2853 [20] SPACER (13X38X5-MM THK)  
2. 135-8575 [59] BOLT AS  
3. 135-8576 [10] BOLT AS-LOCKING  
4. 135-8577 [20] BOLT AS  
5. 140-1493 [1] SHEET  
6. 170-2943 [1] SHEET  
7. 170-2948 [2] SHEET  
8. 170-2949 [1] SHEET  
9. 193-9421 [1] SHEET AS  
10. 236-9610 [1] SHEET  
11. 236-9611 [1] SHEET  
12. 236-9612 [1] SHEET  
13. 241-2022 [1] SHEET AS  
14. 250-5095 [1] SHEET AS  
15. 250-5097 [2] SHEET AS  
16. 250-5099 [1] SHEET AS  
17. 313-8055 [1] SHEET AS  
18. 313-8094 Y [1] SHEET AS-SOUND SUPPRESSION  
19. 7Y-2854 [2] SPACER (24X38X3-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52360439
 

284-7282: GUARD GP-SWIVEL

284-7282 GUARD GP-SWIVEL
S/N WAP1-UP
PART OF 294-1302, 444-8610 FRAME AR-UNDERCARRIAGE
ALSO AN ATTACHMENT
i02657175 SEBP5236
2847282 GUARD GP-SWIVEL Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 284-7283 [2] COVER AS  
    (EACH INCLUDES)
  8T-4132 M [4] NUT (M16X2-THD)  
2. 284-7284 [1] COVER AS  
3. 453-2836 M [8] BOLT (M16X2X45-MM)  
4. 451-2175 [8] WASHER-HARD (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 390D L :

DOOR GP-ACCESS
248-9358 DOOR GP-ACCESS
DOOR GP-ACCESS
248-9358 DOOR GP-ACCESS
DOOR GP-ACCESS
236-9345 DOOR GP-ACCESS
DOOR AS-ACCESS
366-6451 DOOR AS-ACCESS
DOOR AS-ACCESS
366-6447 DOOR AS-ACCESS
DOOR AS-ACCESS
366-6447 DOOR AS-ACCESS
DOOR AS-ACCESS
303-9679 DOOR AS-ACCESS
DOOR AS-ACCESS
303-9677 DOOR AS-ACCESS
FRAME GP-UPPER
308-8763 FRAME GP-UPPER
FRAME GP-UPPER
308-8763 FRAME GP-UPPER
FRAME GP-UPPER
308-8766 FRAME GP-UPPER
FRAME GP-UPPER
308-8766 FRAME GP-UPPER
GEAR & BEARING GP-SWING
227-6099 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
296-6177 GEAR & BEARING GP-SWING
GUARD GP-BOTTOM
313-8053 GUARD GP-BOTTOM
GUARD GP-BOTTOM
313-8054 GUARD GP-BOTTOM

Truck sale:

Caterpillar 390DL, Construction
272,688 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.