AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

570-1985 KIT-HYDRAULIC CYLINDER S/N WAP1-UP PART OF 570-1981 CYLINDER GP-STICK AN ATTACHMENT 390D L EXCAVATOR


HYDRAULIC SYSTEM
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
LINES GP-AUXILIARY

EXCAVATOR 390D L EXCAVATOR WAP
 390D L Excavator WAP00001-UP (MACHINE) POWERED BY C18 Engine SEBP5236 390D L WAP   (2010)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-STICK
365-3312 CYLINDER GP-STICK
CYLINDER GP-STICK
570-1981 CYLINDER GP-STICK
570-1985 KIT-HYDRAULIC CYLINDER
GUARD GP-CYLINDER
342-1910 GUARD GP-CYLINDER
 

#SEBP52360630
 

570-1985: KIT-HYDRAULIC CYLINDER

570-1985 KIT-HYDRAULIC CYLINDER
S/N WAP1-UP
PART OF 570-1981 CYLINDER GP-STICK
AN ATTACHMENT
i07776834 SEBP5236
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  155-9157 [2] RING  
  173-3414 [1] RING  
  365-9197 [2] RING-BACKUP  
  514-6719 [1] RING-BACKUP  
  116-3519 [1] RING-SEAL  
  570-1984 [1] RING-WEAR  
  8C-9182 [1] SEAL AS  
  367-3934 [1] SEAL-BUFFER  
  8C-4893 [1] SEAL-HEAD (211.58-MM ID)  
  514-6718 [1] SEAL-LIP TYPE  
  365-9196 [1] SEAL-O-RING  
  367-3961 [1] SEAL-U-CUP  
 

#SEBP52360631
 

234-6613: LEVER GP-CONTROL

234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N WAP1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
i02111038 SEBP5236
2346613 LEVER GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (NEUTRAL START)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 D TUBE (0.3-M)  
4. 185-8286 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
5. 234-6615 [1] KNOB  
6. 087-4683 [2] LOCKWASHER  
7. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP52360632
 

352-6790: LINES GP-AUXILIARY HYDRAULIC

352-6790 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N WAP1-UP
HB-FAMILY
PART OF 340-4067 OPTION AR-HYDRAULIC
FOR USE WITH 5.5-M (18-FT) STICK
AN ATTACHMENT
i03909980 SEBP5236
3526790 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9217 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4085 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52360633
 

352-6791: LINES GP-AUXILIARY HYDRAULIC

352-6791 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N WAP1-UP
HB-FAMILY
PART OF 340-4065, 340-4066 OPTION AR-HYDRAULIC
FOR USE WITH 4.4-M (14.4-FT) STICK
AN ATTACHMENT
i03909977 SEBP5236
3526791 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9216 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4084 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52360634
 

352-6793: LINES GP-AUXILIARY HYDRAULIC

352-6793 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N WAP1-UP
JB-FAMILY
PART OF 340-4063, 340-4064 OPTION AR-HYDRAULIC
FOR USE WITH 3.4-M (11.2-FT) STICK
AN ATTACHMENT
i03909941 SEBP5236
3526793 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9219 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4082 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52360635
 

352-6794: LINES GP-AUXILIARY HYDRAULIC

352-6794 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N WAP1-UP
JB-FAMILY
PART OF 340-4062 OPTION AR-HYDRAULIC
FOR USE WITH 2.92-M (9.6-FT) STICK
AN ATTACHMENT
i03909936 SEBP5236
3526794 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9218 [2] TUBE AS  
3. 306-1355 [4] CLAMP-HALF  
4. 338-6209 I [2] HOSE AS  
5. 100-4982 M [4] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [32] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52360636
 

359-8631: LINES GP-AUXILIARY HYDRAULIC

359-8631 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N WAP1-UP
PART OF 340-4066, 340-4067 OPTION AR-HYDRAULIC
Type 1
AN ATTACHMENT
i03983325 SEBP5236
3598631 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [2] PLUG-PROTECTION  
2. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
3. 143-4160 [28] CLIP  
4. 146-1463 [2] CLIP (TAB)  
5. 153-8587 [6] PLATE AS  
6. 173-8065 [2] PLATE AS  
7. 173-8067 [4] CLIP  
8. 173-8069 [2] PLATE  
9. 179-5212 [10] PLATE  
10. 197-2356 [1] TUBE AS  
11. 197-2375 [2] PLATE AS  
12. 202-7153 [2] PLATE  
13. 247-9080 [1] TUBE AS  
14. 333-7055 I [2] HOSE AS  
15. 359-8671 [2] TUBE GP-HYDRAULIC (BOOM)  
    (EACH INCLUDES)
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
16. 359-8679 [2] TUBE GP-HYDRAULIC  
    (EACH INCLUDES)
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
17. 146-1461 [4] PLATE  
18. 1P-3705 [4] SEAL-RECTANGULAR  
19. 1P-3706 [4] SEAL-RECTANGULAR  
20. 5P-8077 [8] FLANGE-HALF  
21. 7X-2554 M [14] BOLT (M16X2X70-MM)  
22. 7X-2559 M [16] BOLT (M16X2X160-MM)  
23. 8T-4132 M [4] NUT (M16X2-THD)  
24. 8T-4140 M [24] BOLT (M16X2X60-MM)  
25. 8T-4193 M [36] BOLT (M16X2X50-MM)  
26. 8T-6385 M [4] BOLT (M16X2X180-MM)  
27. 9X-8257 [78] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52360637
 

359-8631: LINES GP-AUXILIARY HYDRAULIC

359-8631 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N WAP1-UP
PART OF 340-4066, 340-4067 OPTION AR-HYDRAULIC
Type 2
AN ATTACHMENT
i04452669 SEBP5236
3598631 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [2] PLUG-PROTECTION  
2. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
3. 143-4160 [28] CLIP  
4. 146-1463 [2] CLIP (TAB)  
5. 153-8587 [6] PLATE AS  
6. 173-8065 [2] PLATE AS  
7. 173-8067 [4] CLIP  
8. 173-8069 [2] PLATE  
9. 179-5212 [10] PLATE  
10. 197-2356 [1] TUBE AS  
11. 197-2375 [2] PLATE AS  
12. 202-7153 [2] PLATE  
13. 247-9080 [1] TUBE AS  
14. 333-7055 I [2] HOSE AS  
15. 359-8671 [2] TUBE GP-HYDRAULIC (BOOM)  
16. 359-8679 C [1] TUBE GP-HYDRAULIC  
17. 146-1461 [4] PLATE  
18. 1P-3705 [4] SEAL-RECTANGULAR  
19. 1P-3706 [4] SEAL-RECTANGULAR  
20. 5P-8077 [8] FLANGE-HALF  
21. 7X-2554 M [14] BOLT (M16X2X70-MM)  
22. 7X-2559 M [16] BOLT (M16X2X160-MM)  
23. 8T-4132 M [4] NUT (M16X2-THD)  
24. 8T-4140 M [24] BOLT (M16X2X60-MM)  
25. 8T-4193 M [36] BOLT (M16X2X50-MM)  
26. 8T-6385 M [4] BOLT (M16X2X180-MM)  
27. 9X-8257 [78] WASHER (17.5X30X3.5-MM THK)  
28. 372-9811 C [1] TUBE GP-HYDRAULIC  
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP52360638
 

359-8631: LINES GP-AUXILIARY HYDRAULIC

359-8631 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N WAP1-UP
PART OF 340-4067 OPTION AR-HYDRAULIC
Type 3
AN ATTACHMENT
i05512436 SEBP5236
3598631 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [2] PLUG-PROTECTION  
2. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
3. 143-4160 [28] CLIP  
4. 146-1463 [2] CLIP (TAB)  
5. 153-8587 [6] PLATE AS  
6. 173-8065 [2] PLATE AS  
7. 173-8067 [4] CLIP  
8. 173-8069 [2] PLATE  
9. 179-5212 [10] PLATE  
10. 197-2356 [1] TUBE AS  
11. 197-2375 [2] PLATE AS  
12. 202-7153 [2] PLATE  
13. 247-9080 [1] TUBE AS  
14. 333-7055 I [2] HOSE AS  
15. 359-8671 [2] TUBE GP-HYDRAULIC (BOOM)  
16. 359-8679 [1] TUBE GP-HYDRAULIC  
17. 146-1461 [4] PLATE  
18. 1P-3705 [4] SEAL-RECTANGULAR  
19. 1P-3706 [4] SEAL-RECTANGULAR  
20. 5P-8077 [8] FLANGE-HALF  
21. 7X-2554 M [14] BOLT (M16X2X70-MM)  
22. 7X-2559 M [16] BOLT (M16X2X160-MM)  
23. 8T-4132 M [4] NUT (M16X2-THD)  
24. 8T-4140 CM [40] BOLT (M16X2X60-MM)  
25. 8T-4193 CM [20] BOLT (M16X2X50-MM)  
26. 8T-6385 M [4] BOLT (M16X2X180-MM)  
27. 9X-8257 C [94] WASHER (17.5X30X3.5-MM THK)  
28. 372-9811 [1] TUBE GP-HYDRAULIC  
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
29. 1P-3705 CJ [2] SEAL-RECTANGULAR  
30. 5P-0049 CJ [2] COVER  
31. 5P-8077 CJ [4] FLANGE-HALF  
32. 8T-4140 CJM [8] BOLT (M16X2X60-MM)  
33. 9X-8257 CJ [8] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   TO BE REMOVED BY CUSTOMER
  M   METRIC PART
 

#SEBP52360639
 

359-8632: LINES GP-AUXILIARY HYDRAULIC

359-8632 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N WAP1-UP
PART OF 340-4064, 340-4065 OPTION AR-HYDRAULIC
Type 1
AN ATTACHMENT
i03991209 SEBP5236
3598632 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [2] PLUG-PROTECTION  
2. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
3. 143-4160 [24] CLIP  
4. 146-1463 [2] CLIP (TAB)  
5. 153-8587 [6] PLATE AS  
6. 173-8057 [1] TUBE AS  
7. 173-8059 [2] TUBE AS  
8. 173-8065 [2] PLATE AS  
9. 173-8067 [4] CLIP  
10. 173-8069 [2] PLATE  
11. 179-5212 [8] PLATE  
12. 202-7153 [2] PLATE  
13. 245-2431 [1] TUBE AS  
14. 333-7055 I [2] HOSE AS  
15. 359-8683 [2] TUBE GP-HYDRAULIC  
    (EACH INCLUDES)
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
16. 146-1461 [4] PLATE  
17. 1P-3705 [4] SEAL-RECTANGULAR  
18. 1P-3706 [4] SEAL-RECTANGULAR  
19. 5P-8077 [8] FLANGE-HALF  
20. 7X-2554 M [14] BOLT (M16X2X70-MM)  
21. 7X-2559 M [12] BOLT (M16X2X160-MM)  
22. 8T-4132 M [4] NUT (M16X2-THD)  
23. 8T-4140 M [24] BOLT (M16X2X60-MM)  
24. 8T-4193 M [32] BOLT (M16X2X50-MM)  
25. 8T-6385 M [4] BOLT (M16X2X180-MM)  
26. 9X-8257 [70] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Special Instruction
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 390D L :

350-9115 HYDRAULIC AR
297-0223 HYDRAULIC AR
HEAD GP-PUMP
510-2323 HEAD GP-PUMP
HEAD GP-PUMP
191-5593 HEAD GP-PUMP
GAUGE GP-SIGHT
347-6081 GAUGE GP-SIGHT
GAUGE GP-SIGHT
227-0620 GAUGE GP-SIGHT
FILTER GP-OIL
6E-5534 FILTER GP-OIL
FILTER GP-OIL
419-8528 FILTER GP-OIL
LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL
LINES GP-AUXILIARY HYDRAULIC
352-6790 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6791 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6793 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6794 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
359-8631 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
359-8631 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
359-8631 LINES GP-AUXILIARY HYDRAULIC

Truck sale:

Caterpillar 390DL, Construction
272,688 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Caterpillar 390DL, Construction
250,503 
Caterpillar 390DL, Construction
- Crawler Excavators
BORUSAN MAKINA (HEAD OFFICE)
Turkey
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.