299-2943 WIRING GP-MONITOR -WORK AREA VISUAL SYSTEM, REAR S/N PAS1-UP PART OF 319-9157 CAMERA AR AN ATTACHMENT 374D L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 299-2943 WIRING GP-
1. 299-2629 WIRING GP-
2. 306-8538 WIRING GP-
3. 342-2870 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

4. 199-4726 DRIVE GP-F
5. 296-6303 DRIVE GP-F
6. 353-0606 DRIVE GP-F
7. 353-0607 DRIVE GP-F
8. 353-0608 DRIVE GP-F
9. 513-0834 DRIVE GP-F
0. INFORMATION

EXCAVATOR 374D L EXCAVATOR PAS
374D L Excavator PAS00001-UP (MACHINE) POWERED BY C15 Engine SEBP5244 374D L PAS (2010)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

299-3001 WIRING GP-GRADE CONTROL

299-3004 WIRING GP-GRADE CONTROL

299-2943 WIRING GP-MONITOR

299-2629 WIRING GP-PLATFORM

306-8538 WIRING GP-QUICK COUPLER

342-2870 WIRING GP-REFUELING PUMP

#SEBP52440340

299-2943: WIRING GP-MONITOR

WIRING GP-MONITOR

299-2943 WIRING GP-MONITOR -WORK AREA VISUAL SYSTEM, REAR
S/N PAS1-UP
PART OF 319-9157 CAMERA AR
AN ATTACHMENT

i03775664 SEBP5244

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	7K-1181	[11]	STRAP-CABLE
3.	342-2934	[1]	HARNESS AS-WIRING (CAMERA)
	3S-2093	[3]	STRAP-CABLE
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
4.	342-2935	[1]	HARNESS AS-WIRING (MONITOR)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER

#SEBP52440341

299-2629: WIRING GP-PLATFORM

WIRING GP-PLATFORM

299-2629 WIRING GP-PLATFORM
S/N PAS1-UP
PART OF 342-3451 OPERATOR AR

i03656502 SEBP5244

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7G-1060	[1]	STRAP AS-GROUND
2.	7K-1181	[3]	STRAP-CABLE
3.	111-4837	[4]	CLIP
4.	111-4838	[2]	CLIP
5.	111-4839	[2]	STRAP
6.	116-0118	[8]	CLIP
7.	342-2886	[1]	HARNESS AS-PLATFORM
	8T-8729	[14]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[12]	STRAP-CABLE
	8T-8737	[53]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[6]	TERMINAL (FEMALE)
	9W-0852	[23]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[42]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[21]	TERMINAL (MALE)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	9X-3402	[86]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8069	[5]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4009	[5]	PLUG AS-CONNECTOR (12-PIN)
	230-5010	[2]	PLUG AS-CONNECTOR (6-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	238-2363	[12]	TERMINAL (FEMALE)
	238-2366	[5]	TERMINAL (MALE)
	239-7352	[3]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[3]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	272-5000	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
8.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
9.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
11.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP52440342

306-8538: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

306-8538 WIRING GP-QUICK COUPLER
S/N PAS1-UP
PART OF 302-9440 CONTROL AR-COUPLER, 352-7948 KIT-QUICK COUPLER
AN ATTACHMENT

i03785269 SEBP5244

3068538 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[9]	STRAP-CABLE
2.	259-4884	[1]	BRACKET AS
3.	259-7220	[1]	COVER
4.	267-7671	[1]	SWITCH GP-TOGGLE (QUICK COUPLER)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
	267-7672	[1]	HARNESS AS-WIRING
	3S-2093	[1]	STRAP-CABLE
	121-1173	[3]	TERMINAL (MALE)
	9X-8081	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 6 SCREW)
	5P-2321	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
5.	342-2931	[1]	HARNESS AS-CAB
	3S-2093	[5]	STRAP-CABLE
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	102-7965	[3]	TERMINAL (FEMALE)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	163-6803	[1]	PLUG-CONNECTOR (5-PIN)
	167-3487	[1]	WEDGE-PLUG LOCK (5-PIN)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
6.	342-2932	[1]	HARNESS AS-PLATFORM
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
7.	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP52440343

342-2870: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

342-2870 WIRING GP-REFUELING PUMP
S/N PAS1-UP
PART OF 340-3966 PUMP GP-FUEL TRANSFER
AN ATTACHMENT

i03789413 SEBP5244

3422870 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	111-4836	[3]	CLIP
4.	116-0118	[3]	CLIP
5.	149-5050	[2]	RELAY (24-VOLT)
6.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
	1S-0812	[2]	SCREW-TAPPING
	3K-0835	[1]	NUT (5/8-24-THD)
	6F-0253	[1]	LOCKWASHER
	8T-8748	[1]	ADAPTER-MOUNT
	9W-0625	[1]	SWITCH AS-PUSH BUTTON
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	238-1595	[1]	HARNESS AS-SWITCH (REFUELING PUMP, START)
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
	1S-0812	[2]	SCREW-TAPPING
	3E-7389	[1]	SWITCH-PUSH BUTTON
	3K-0835	[1]	NUT (5/8-24-THD)
	6F-0253	[1]	LOCKWASHER
	8T-8748	[1]	ADAPTER-MOUNT
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	238-1597	[1]	HARNESS AS-SWITCH (REFUELING PUMP, STOP)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
9.	238-1637	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[2]	STRAP-CABLE
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)(FEMALE)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)(FEMALE)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)(FEMALE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
10.	342-2879	[1]	HARNESS AS-PUMP (REFUELING LEVEL SWITCH)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
11.	5P-8439	[1]	GROMMET
12.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
13.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4127 M	[2]	SCREW-MACHINE (M5X0.8X20-MM)
15.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
16.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
17.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
18.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
19.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP52440344

199-4726: DRIVE GP-FINAL

DRIVE GP-FINAL

199-4726 DRIVE GP-FINAL -WITHOUT MOTOR
S/N PAS1-452
PART OF 296-6303 DRIVE GP-FINAL

i01915864 SEBP5244

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	199-4727	[1]	HOUSING-MOTOR
2.	214-7880	[1]	SEAL GP-DUO-CONE
	214-7879	[2]	RING-TORIC
3.	163-1657	[2]	CUP-SPECIAL TAPERED
4.	163-1656	[2]	CONE-SPECIAL TAPERED
5.	8C-3411 M	[10]	BOLT (M30X3.5X90-MM)
6.	136-2926	[4]	GEAR-PLANETARY (22-TEETH)
7.	136-2923	[1]	GEAR-SUN (20-TEETH)
8.	7Y-1469	[1]	COUPLING
9.	136-2944	[2]	SPACER (61X95.1X10-MM THK)
10.	136-2948	[6]	PIN-DOWEL
11.	199-4728	[1]	HOUSING (SPROCKET)
12.	136-2959 BJ	[1]	SHIM (0.3-MM THK)
	136-2962 BJ	[1]	SHIM (0.6-MM THK)
	136-2963 BJ	[1]	SHIM (0.7-MM THK)
	136-2964 BJ	[1]	SHIM (0.8-MM THK)
	136-2965 BJ	[1]	SHIM (1-MM THK)
	136-2966 BJ	[1]	SHIM (1.6-MM THK)
17.	136-2949	[1]	GEAR-COUPLING (83-TEETH)
18.	136-2967	[1]	SEAL-O-RING
19.	136-2947	[1]	CARRIER-PLANETARY
20.	136-2945	[1]	SPACER (203X233X8.5-MM THK)
21.	7Y-0667	[1]	RING-RETAINING
22.	136-2930	[1]	CARRIER-PLANETARY
23.	136-2922	[1]	GEAR-SUN (19-TEETH)
24.	136-2927	[1]	GEAR-RING (86-TEETH)
25.	7M-8485	[2]	SEAL-O-RING
26.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
27.	136-2934	[1]	CARRIER AS
27A.	136-2931	[3]	SHAFT-PLANETARY
28.	136-2943	[1]	RING-RETAINING
29.	136-2921	[1]	GEAR-SUN (22-TEETH)
30.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
31.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
32.	136-2946	[3]	BEARING-CAGED
33.	8T-4240	[3]	RING-RETAINING
34.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
35.	136-2924	[3]	GEAR-PLANETARY (31-TEETH)
36.	8T-3957 M	[12]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
37.	136-2920	[1]	COVER
38.	136-2932	[3]	SHAFT-PLANETARY
39.	7Y-5231 M	[18]	BOLT (M30X3.5X260-MM)
40.	9X-8258	[18]	WASHER (33X56X6-MM THK)
41.	136-2925	[3]	GEAR-PLANETARY (23-TEETH)
42.	1U-8846 B		SEALANT-GASKET
43.	136-2928	[1]	GEAR-RING (68-TEETH)
44.	7Y-0912	[11]	BEARING AS-ROLLER
45.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
46.	099-5194	[7]	PIN-SPRING
47.	136-2933	[4]	SHAFT-PLANETARY
48.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)

			AVAILABLE REPAIR KIT(S):
	136-2957 J	[1]	KIT-SHIM (FINAL DRIVE)
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART

#SEBP52440345

296-6303: DRIVE GP-FINAL

DRIVE GP-FINAL

296-6303 DRIVE GP-FINAL -WITH MOTOR
S/N PAS1-452
PART OF 296-6151 POWER TRAIN AR

i03655264 SEBP5244

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	199-4726 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
2.	315-4480 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP52440346

353-0606: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0606 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N PAS453-UP
PART OF 296-6151 POWER TRAIN AR

i04367556 SEBP5244

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-2461 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	353-0607 Y	[1]	DRIVE GP-FINAL (WITH MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP52440347

353-0607: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0607 DRIVE GP-FINAL -WITH MOTOR
S/N PAS453-UP
PART OF 353-0606 DRIVE GP-FINAL

i04367560 SEBP5244

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	353-0608 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
2.	315-4480 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP52440348

353-0608: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0608 DRIVE GP-FINAL -WITHOUT MOTOR
S/N PAS453-UP
513-0834 IS FOR FIELD REPL.OF LH FINAL DRIVE, 513-0837 IS FOR FIELD REPL. OF RH FINAL DRIVE
PART OF 353-0607 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@513-0834@@@@@, @@@@@513-0837@@@@@

i04367563 SEBP5244

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	353-0616	[1]	HOUSING-MOTOR
2.	214-7880	[1]	SEAL GP-DUO-CONE
	214-7879	[2]	RING-TORIC
3.	163-1657	[2]	CUP-SPECIAL TAPERED
4.	163-1656	[2]	CONE-SPECIAL TAPERED
5.	8C-3411 M	[10]	BOLT (M30X3.5X90-MM)
6.	136-2926	[4]	GEAR-PLANETARY (22-TEETH)
7.	136-2923	[1]	GEAR-SUN (20-TEETH)
8.	7Y-1469	[1]	COUPLING
9.	136-2944	[2]	SPACER (61X95.1X10-MM THK)
10.	136-2948	[6]	PIN-DOWEL
11.	199-4728	[1]	HOUSING (SPROCKET)
12.	136-2959 BJ	[1]	SHIM (0.3-MM THK)
	136-2962 BJ	[1]	SHIM (0.6-MM THK)
	136-2963 BJ	[1]	SHIM (0.7-MM THK)
	136-2964 BJ	[1]	SHIM (0.8-MM THK)
	136-2965 BJ	[1]	SHIM (1-MM THK)
	136-2966 BJ	[1]	SHIM (1.6-MM THK)
17.	136-2949	[1]	GEAR-COUPLING (83-TEETH)
18.	136-2967	[1]	SEAL-O-RING
19.	136-2947	[1]	CARRIER-PLANETARY
20.	136-2945	[1]	SPACER (203X233X8.5-MM THK)
21.	7Y-0667	[1]	RING-RETAINING
22.	136-2930	[1]	CARRIER-PLANETARY
23.	136-2922	[1]	GEAR-SUN (19-TEETH)
24.	136-2927	[1]	GEAR-RING (86-TEETH)
25.	7M-8485	[2]	SEAL-O-RING
26.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
27.	136-2934	[1]	CARRIER AS
27A.	136-2931	[3]	SHAFT-PLANETARY
28.	136-2943	[1]	RING-RETAINING
29.	136-2921	[1]	GEAR-SUN (22-TEETH)
30.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
31.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
32.	136-2946	[3]	BEARING-CAGED
33.	8T-4240	[3]	RING-RETAINING
34.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
35.	136-2924	[3]	GEAR-PLANETARY (31-TEETH)
36.	8T-3957 M	[12]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
37.	136-2920	[1]	COVER
38.	136-2932	[3]	SHAFT-PLANETARY
39.	453-4193 M	[18]	BOLT (M30X3.5X260-MM)
40.	451-2178	[18]	WASHER-HARD (33X56X6-MM THK)
41.	136-2925	[3]	GEAR-PLANETARY (23-TEETH)
42.	1U-8846 B		SEALANT-GASKET
43.	136-2928	[1]	GEAR-RING (68-TEETH)
44.	7Y-0912	[11]	BEARING AS-ROLLER
45.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
46.	099-5194	[7]	PIN-SPRING
47.	136-2933	[4]	SHAFT-PLANETARY
48.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)

			AVAILABLE REPAIR KIT(S):
	136-2957 J	[1]	KIT-SHIM (FINAL DRIVE)
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART

#SEBP52440349

513-0834: DRIVE GP-FINAL

DRIVE GP-FINAL

513-0834 DRIVE GP-FINAL -WITHOUT MOTOR, LH
S/N PAS453-UP
FIELD REPLACEMENT FOR @@@@@353-0608@@@@@

i06870418 SEBP5244

For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
2.	7Y-1469	[1]	COUPLING
3.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
4.	136-2920	[1]	COVER
5.	136-2921	[1]	GEAR-SUN (22-TEETH)
6.	136-2922	[1]	GEAR-SUN (19-TEETH)
7.	136-2923	[1]	GEAR-SUN (20-TEETH)
8.	136-2924	[3]	GEAR-PLANETARY (31-TEETH)
9.	136-2925	[3]	GEAR-PLANETARY (23-TEETH)
10.	136-2926	[4]	GEAR-PLANETARY (22-TEETH)
11.	136-2927	[1]	GEAR-RING (86-TEETH)
12.	136-2928	[1]	GEAR-RING (68-TEETH)
13.	136-2930	[1]	CARRIER-PLANETARY
14.	136-2932	[3]	SHAFT-PLANETARY
15.	136-2933	[4]	SHAFT-PLANETARY
16.	136-2934	[1]	CARRIER AS
	136-2931	[3]	SHAFT-PLANETARY
17.	136-2943	[1]	RING-RETAINING
18.	136-2945	[1]	SPACER (203X233X8.5-MM THK)
19.	136-2947	[1]	CARRIER-PLANETARY
20.	136-2948	[6]	PIN-DOWEL
21.	136-2949	[1]	GEAR-COUPLING (83-TEETH)
22.	199-4728	[1]	HOUSING (SPROCKET)
23.	214-7880	[1]	SEAL GP-DUO-CONE
	214-7879	[2]	RING-TORIC
24.	451-2178	[18]	WASHER-HARD (33X56X6-MM THK)
25.	452-3523	[1]	HOUSING-MOTOR
26.	453-4193 M	[18]	BOLT (M30X3.5X260-MM)
27.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
28.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
29.	099-5194	[7]	PIN-SPRING
30.	136-2944	[2]	SPACER (61X95.1X10-MM THK)
31.	136-2946	[3]	BEARING-CAGED
32.	136-2959 B	[1]	SHIM (0.3-MM THK)
	136-2962 B	[1]	SHIM (0.6-MM THK)
	136-2963 B	[1]	SHIM (0.7-MM THK)
	136-2964 B	[1]	SHIM (0.8-MM THK)
	136-2965 B	[1]	SHIM (1-MM THK)
	136-2966 B	[1]	SHIM (1.6-MM THK)
37.	163-1656	[2]	CONE-SPECIAL TAPERED
38.	163-1657	[2]	CUP-SPECIAL TAPERED
40.	136-2967	[1]	SEAL-O-RING
41.	3E-2338	[2]	PLUG-PIPE
42.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
43.	7M-8485	[2]	SEAL-O-RING
44.	7Y-0667	[1]	RING-RETAINING
45.	7Y-0912	[11]	BEARING AS-ROLLER
46.	173-9683 M	[10]	BOLT (M30X3.5X90-MM)
47.	8T-3957 M	[12]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
48.	8T-4240	[3]	RING-RETAINING

	1U-8846 BF		SEALANT-GASKET


			AVAILABLE REPAIR KIT(S):
	136-2957	[1]	KIT-SHIM
			(INCLUDES SHIMS)
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C15 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C15 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0174 FMI 04 Fuel Temperature short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C15 and C18 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
C15 and C18 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0102 FMI 04 Boost Pressure Sensor short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C11 and C15 Engines for Caterpillar Built Machines

CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C15 and C18 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C15 Engines for Caterpillar Built Machines

Engine Wiring Information
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C15 and C18 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C11 and C15 Engines for Caterpillar Built Machines

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C11 and C15 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C15 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines

Electrical Connectors and Functions
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C11 and C15 Engines for Caterpillar Built Machines

CID 0774 FMI 08 Sec Throttle Position Sensor signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

Coolant Flow Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Coolant Level Sensor Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C15 and C18 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C15 Engines for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Indicator Lamp Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0717 FMI 02 Remote Throttle Switch Incorrect Inputs
C15 Engine for the 657G Wheel Tractor-Scraper

CID 1756 FMI 05 Start Aid Indicator open circuit
C15 and C18 Engines for Caterpillar Built Machines

CID 1756 FMI 06 Start Aid Indicator short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0549 FMI 02 Incorrect Throttle Lock Switch inputs
C15 and C18 Engines for Caterpillar Built Machines

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
C15 and C18 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C15 Engine for the 657G Wheel Tractor-Scraper

Throttle Position Sensor Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Engine Wiring Information
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0269 FMI 04 Sensor Supply too low
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0269 FMI 03 Sensor Supply too high
C15 Engine for the 657G Wheel Tractor-Scraper

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C15 and C18 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C15 and C18 Engines for Caterpillar Built Machines

CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0548 FMI 05 Throttle Lock Lamp open circuit
C15 and C18 Engines for Caterpillar Built Machines

CID 0548 FMI 06 Throttle Lock Lamp short
C15 and C18 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C15 Engine for the 657G Wheel Tractor-Scraper

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0190 FMI 08 Engine Speed signal abnormal
C15 Engine for the 657G Wheel Tractor-Scraper

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C15 Engine for the 657G Wheel Tractor-Scraper

Engine Shutdown Switch Circuit - Test
C15 Engine for the 657G Wheel Tractor-Scraper

Remote Throttle Switch Circuit - Test
C15 Engine for the 657G Wheel Tractor-Scraper

Engine Pressure Sensor Open or Short Circuit - Test
C15 Engine for the 657G Wheel Tractor-Scraper

Electrical Connectors - Inspect
C11 and C15 Engines for Caterpillar Built Machines

Electrical Connectors
C15 and C18 Engines for Caterpillar Built Machines

Wiring Information
C15 and C18 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C15 and C18 Engines for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 374D L :

299-3004 WIRING GP-GRADE CONTROL

299-3001 WIRING GP-GRADE CONTROL

342-2952 WIRING GP-FRONT

365-1280 WIRING GP-ENGINE

228-6601 WIRING GP-ENGINE

306-8566 WIRING GP-ELECTRONIC CONTROL

306-8555 WIRING GP-ELECTRONIC CONTROL

299-2629 WIRING GP-PLATFORM

306-8538 WIRING GP-QUICK COUPLER

342-2870 WIRING GP-REFUELING PUMP

199-4726 DRIVE GP-FINAL

296-6303 DRIVE GP-FINAL

353-0606 DRIVE GP-FINAL

353-0607 DRIVE GP-FINAL

353-0608 DRIVE GP-FINAL

Truck sale:

233,901

Caterpillar 374DL, Construction
- Crawler Excavators
TOROMONT CAT
Canada

172,886

Caterpillar 374DL, Construction
- Crawler Excavators
FINNING CANADA
Canada

558,900

Caterpillar 374DL, Construction
- Crawler Excavators
FOLEY EQUIPMENT COMPANY

289,000

Caterpillar 374DL, Construction
- Crawler Excavators
HOLT CAT

278,000

Caterpillar 374DL, Construction
- Crawler Excavators
HOLT CAT