BASIC ENGINE
CYLINDER HEAD GPDRIVE GP-ACCESSORY
FLYWHEEL GP
GEAR GP
HOUSING GP-FLYWHEEL
BASIC ENGINE
CYLINDER HEAD GP#SEBP52540020
143-3614: CYLINDER HEAD AS
Parts for your 769C TRUCK:
CATERPILLAR SIS#SEBP52540021
107-7319: CYLINDER HEAD GP
107-7319 CYLINDER HEAD GP
S/N 99C1-UP
S/N 99C1-UP
Parts for your 769C TRUCK:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 107-7320 Y | [2] | CYLINDER HEAD GP | |
2. | 141-6605 | [2] | MANIFOLD (HEUI FLUID) | |
3. | 106-1792 | [16] | STUD-TAPERLOCK (3/8-16X4-IN) | |
4. | 1D-4541 | [8] | BOLT (5/16-18X3-IN) | |
5. | 5P-7684 | [4] | PLUG | |
6. | 108-5806 | [4] | SEAL-O-RING | |
7. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
8. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
9. | 9S-8752 | [18] | NUT-FULL (3/8-16-THD) | |
10. | 110-1627 | [2] | PLATE | |
11. | 9S-8006 | [2] | PLUG (7/8-14-THD) | |
12. | 108-5803 | [2] | SEAL-O-RING | |
13. | 1N-5999 | [1] | PLUG-O-RING | |
14. | 033-6027 | [2] | SEAL-O-RING | |
15. | 167-1709 Y | [1] | SENSOR GP-PRESSURE (INJECTION ACTUATION OIL) | |
16. | 7W-3447 | [12] | SPACER (10.2X19.05X10.2-MM THK) | |
17. | 194-6724 Y | [1] | SENSOR GP-PRESSURE (BOOST AIR) | |
18. | 9X-0263 | [1] | ADAPTER | |
19. | 6V-5048 | [1] | SEAL-O-RING | |
20. | 9S-8004 | [4] | PLUG (9/16-18-THD) | |
21. | 6V-5049 | [4] | SEAL-O-RING | |
22. | 107-7322 | [28] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
236-0486 | [1] | BOLT-12 POINT HEAD (3/4-16X10-IN) | ||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
23. | 061-8561 | [8] | SEAL-O-RING | |
24. | 6V-5266 | [8] | SEAL-O-RING | |
25. | 107-9570 | [16] | SEAL-O-RING | |
26. | 108-0219 | [8] | SLEEVE | |
27. | 283-5666 | [2] | GASKET-CYLINDER HEAD | |
28. | 2N-7174 | [8] | GASKET | |
29. | 359-1439 | [32] | SEAL AS-WATER | |
1U-8846 BF | SEALANT-GASKET | |||
B | USE AS REQUIRED | |||
F | NOT SHOWN | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP52540022
107-7320: CYLINDER HEAD GP
Parts for your 769C TRUCK:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 105-3788 Y | [1] | CYLINDER HEAD AS | |
2. | 122-0322 | [8] | VALVE-INLET | |
3. | 102-7494 | [2] | DOWEL | |
4. | 2A-4429 | [32] | LOCK-RETAINER | |
5. | 137-6500 | [16] | ROTOCOIL AS | |
(EACH INCLUDES) | ||||
5A. | 137-6501 | [1] | SHIELD-OIL | |
6N-7154 | [1] | ROTOCOIL AS | ||
6. | 4N-5906 | [16] | SPRING-VALVE | |
7. | 122-0321 | [8] | VALVE-EXHAUST | |
8. | 173-7188 | [16] | GUIDE-VALVE (STANDARD) | |
7C-5306 AB | GUIDE-VALVE (0.51-MM OS) | |||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
Y | SEPARATE ILLUSTRATION |
#SEBP52540023
107-7320: CYLINDER HEAD GP
Parts for your 769C TRUCK:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 143-3614 YC | [1] | CYLINDER HEAD AS | |
2. | 122-0322 | [8] | VALVE-INLET | |
3. | 2A-4429 | [32] | LOCK-RETAINER | |
4. | 137-6500 | [16] | ROTOCOIL AS | |
(EACH INCLUDES) | ||||
4A. | 137-6501 | SHIELD-OIL | ||
6N-7154 | [1] | ROTOCOIL AS | ||
5. | 4N-5906 | [16] | SPRING-VALVE | |
6. | 122-0321 | [8] | VALVE-EXHAUST | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP52540024
9N-0725: DRIVE GP-ACCESSORY
9N-0725 DRIVE GP-ACCESSORY
S/N 99C1-UP
S/N 99C1-UP
Parts for your 769C TRUCK:
CATERPILLAR SIS#SEBP52540025
2W-6533: FLYWHEEL GP
2W-6533 FLYWHEEL GP
S/N 99C1-UP
S/N 99C1-UP
Parts for your 769C TRUCK:
CATERPILLAR SIS#SEBP52540026
126-7281: GEAR GP-FRONT
126-7281 GEAR GP-FRONT
S/N 99C1-UP
S/N 99C1-UP
Parts for your 769C TRUCK:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 124-7609 | [1] | GEAR-PUMP IDLER (86-TEETH) | |
2. | 101-6713 | [1] | PLATE-RETAINING | |
3. | 5P-5855 | [4] | BOLT-12 POINT HEAD (1/2-13X1.75-IN) | |
4. | 112-9217 | [1] | PLATE-THRUST | |
5. | 2B-2695 | [4] | BOLT (5/16-18X0.875-IN) | |
6. | 271-5661 | [1] | GEAR AS-IDLER (80, 43-TEETH) | |
1B-8705 | [1] | KEY-WOODRUFF | ||
6A. | 131-7123 | [1] | BUSHING | |
7. | 1B-8705 | [1] | KEY-WOODRUFF | |
8. | 117-9712 | [1] | SHAFT-DRIVE IDLER | |
9. | 3G-2292 | [5] | BOLT-LOCKING (3/8-16X0.87-IN) | |
10. | 7E-5661 | [1] | GEAR-OIL PUMP DRIVE (69-TEETH)(ENGINE) | |
11. | 0S-1571 | [1] | BOLT (3/8-16X1.75-IN) | |
12. | 1P-7346 | [1] | WASHER-HARD (10.2X35X6-MM THK) | |
13. | 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) |
#SEBP52540027
4N-3825: GEAR GP-REAR
4N-3825 GEAR GP-REAR
S/N 99C1-UP
S/N 99C1-UP
Parts for your 769C TRUCK:
CATERPILLAR SIS#SEBP52540028
6N-2415: GEAR GP-REAR
6N-2415 GEAR GP-REAR
S/N 99C1-UP
S/N 99C1-UP
Parts for your 769C TRUCK:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2P-8986 | [1] | CUP-BEARING | |
2P-8987 | [1] | CONE-BEARING | ||
2. | 2W-3384 C | [1] | GEAR (56-TEETH) | |
3. | 5P-8429 | [1] | SEAL-O-RING | |
4. | 6N-2599 | [1] | CAGE-BEARING | |
5. | 0S-1594 | [5] | BOLT (3/8-16X1-IN) | |
6. | 160-8181 | [1] | SEAL-LIP TYPE | |
7. | 6V-7725 C | [1] | BEARING AS-ROLLER | |
8. | 5M-2894 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
9. | 3P-7313 | [1] | RING-RETAINING | |
10. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
11. | 8S-9151 | [1] | CUP-BEARING | |
8S-9152 | [1] | CONE-BEARING | ||
12. | 2M-1538 | [1] | STUD-TAPERLOCK (3/8-16X1.6-IN) | |
9S-8752 | [1] | NUT-FULL (3/8-16-THD) | ||
13. | 2W-8346 C | [1] | GEAR-IDLER (63-TEETH) | |
14. | 4N-8094 | [1] | SHAFT-IDLER GEAR | |
15. | 3P-0654 | [1] | SEAL-O-RING | |
16. | 4N-0684 | [1] | DOWEL | |
17. | 2W-3996 C | [1] | GEAR-CRANKSHAFT (56-TEETH) | |
18. | 4N-0848 | [1] | SLEEVE-WEAR | |
19. | 502-4034 | [1] | SEAL-O-RING | |
20. | 4B-9782 | [1] | BALL | |
21. | 4N-8095 | [1] | WASHER | |
22. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
C | CHANGE FROM PREVIOUS TYPE |
#SEBP52540029
129-5244: HOUSING GP-FLYWHEEL
129-5244 HOUSING GP-FLYWHEEL
S/N 99C1-UP
S/N 99C1-UP
Parts for your 769C TRUCK:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7C-6948 | [1] | HOUSING-FLYWHEEL | |
2. | 161-7293 | [1] | GASKET-CYLINDER | |
3. | 8T-6765 | [3] | PLUG-PIPE (1/4-18-THD) | |
4. | 3S-0036 | [2] | PLUG-CORE | |
5. | 8N-7806 I | [1] | HOSE AS | |
6. | 1D-4706 | [1] | BOLT (3/8-16X6-IN) | |
7. | 8M-9124 | [2] | WASHER (10X22.5X8-MM THK) | |
8. | 7G-2176 | [4] | DAMPER-BOLT | |
9. | 8F-8544 | [1] | BOLT (3/8-16X6.25-IN) | |
10. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
11. | 0T-0573 | [6] | BOLT (3/8-16X2.75-IN) | |
12. | 0L-1143 | [1] | BOLT (3/8-16X2.5-IN) | |
13. | 5F-0304 | [1] | PLUG (FLYWHEEL HOUSING) | |
14. | 2A-1162 | [1] | GASKET | |
15. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
16. | 2A-1531 | [7] | BOLT (1/2-13X6.5-IN) | |
17. | 2M-0849 | [7] | WASHER-HARD (13.5X25.5X5-MM THK) | |
18. | 1W-3136 | [1] | BAFFLE | |
19. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
20. | 8L-3282 | [1] | CONNECTOR | |
21. | 032-1268 | [1] | CONNECTOR (90-DEG) | |
22. | 230-6262 B | SEALANT | ||
B | USE AS REQUIRED | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM |
Information:
BASIC ENGINE
CYLINDER HEAD GP
Engine News
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
2013/05/13
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-Australia
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Service Letter-APD
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Testing and Adjusting
Disassembly and Assembly
Fuel Injection Nozzle Adapters (Direct Injection-Earlier)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Nozzle Adapters (Direct Injection-Earlier)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Inlet and Exhaust Valves - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
3408E and 3412E Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
3408E and 3412E Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
1986/09/08
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
1977/08/22
Caterpillar Parts SIS Catalog 769C :
Truck sale:
68.091
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada