AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

219-0009 TURBOCHARGER GP S/N 80M7883-UP 990 WHEEL LOADER


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
FILTER GP-FUEL
LINES GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
FILTER GP-FUEL
PUMP GP-UNIT INJECTOR HYD

WHEEL LOADER 990 WHEEL LOADER 7HK
 3412E Engine Emissions Repower Tier I For 990 Wheel Loader 7HK00001-UP (MACHINE) SEBP5257 990 7HK   (1991)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
122-6789 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER WATER
122-4978 LINES GP-TURBOCHARGER WATER
LINES GP-TURBOCHARGER WATER
123-1002 LINES GP-TURBOCHARGER WATER
CARTRIDGE GP-TURBOCHARGER
218-0890 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
218-0891 TURBOCHARGER GP
TURBOCHARGER GP
219-0009 TURBOCHARGER GP
 

#SEBP52570070
 

219-0009: TURBOCHARGER GP

219-0009 TURBOCHARGER GP
S/N 80M7883-UP
i01775657 SEBP5257
2190009 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 218-0891 Y [2] TURBOCHARGER GP  
2. 2N-2765 [8] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
3. 1S-4295 [2] GASKET (TURBOCHARGER)  
4. 2N-2766 [8] LOCKNUT (3/8-16-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP52570071
 

125-3431: DRIVE GP-UNIT INJ HYD PUMP

125-3431 DRIVE GP-UNIT INJ HYD PUMP
S/N 80M7883-UP
i01324429 SEBP5257
1253431 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-6644 CY [1] DRIVE GP-UNIT INJ HYD PUMP  
2. 6V-3549 [1] SEAL-O-RING  
3. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
4. 194-6722 Y [1] SENSOR GP-PRESSURE (ATMOSPHERIC AIR)  
5. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 6V-5049 [1] SEAL-O-RING  
8. 118-6335 [1] PIN  
9. 6V-4589 [1] SEAL-O-RING  
10. 5P-9890 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP52570072
 

180-6644: DRIVE GP-UNIT INJ HYD PUMP

180-6644 DRIVE GP-UNIT INJ HYD PUMP
S/N 80M7883-UP
PART OF 125-3431 DRIVE GP-UNIT INJ HYD PUMP
i01324370 SEBP5257
1806644 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-6645 [1] SHAFT AS  
1A. 3S-6605 [1] PLUG-CUP  
2. 150-2392 [1] PLATE-THRUST  
3. 180-6646 [1] GASKET  
4. 180-6647 [1] HOUSING AS  
4A. 2H-1190 [2] DOWEL  
4B. 162-0151 [1] BUSHING (38.1-MM OD)  
4C. 162-0152 [1] BUSHING (94.8-MM OD)  
5. 162-0160 [1] HOUSING AS  
5A. 2A-3746 [1] PLUG-CUP  
5B. 162-0150 [1] BUSHING (28.7-MM OD)  
5C. 162-0151 [1] BUSHING (38.1-MM OD)  
6. 125-5835 [1] PLUG-FELT (UNIT INJECTOR HYDRAULIC PUMP)  
7. 1B-9575 [4] BOLT (5/16-18X1.56-IN)  
8. 0S-1618 [2] BOLT (5/16-18X1-IN)  
9. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
10. 9S-8004 [1] PLUG (9/16-18-THD)  
11. 6V-5049 [1] SEAL-O-RING  
12. 1D-4541 [2] BOLT (5/16-18X3-IN)  
13. 8M-6802 [3] SCREW-HEX SOCKET (1/4-20X1-IN)  
14. 155-6637 [1] GEAR-OIL DRIVE (18-TEETH)  
15. 124-6640 [1] PLATE  
16. 031-2701 [2] BOLT-LOCKING (5/16-18X1.25-IN)  
 

#SEBP52570073
 

131-0463: FILTER GP-WATER SEP & FUEL

131-0463 FILTER GP-WATER SEP & FUEL
S/N 7HK1-UP
PART OF 299-6555 INSTALLATION GP-ENGINE
i00172234 SEBP5257
1310463 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
  7E-5346 [1] VALVE AS (FUEL FILTER)  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
2. 129-0372 [1] FILTER AS-WATER SEP & FUEL (PRIMARY)  
  133-5673 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
  129-0375 [1] BOWL AS-WATER COLLECTION  
  141-0284 [1] KIT-FUEL FILTER & WATER SEP  
    (INCLUDES GASKET & SEAL)
3. 9S-8002 [4] PLUG (7/16-20-THD)  
4. 6V-5048 [4] SEAL-O-RING  
 

#SEBP52570074
 

232-1168: INJECTOR GP-FUEL

232-1168 INJECTOR GP-FUEL
S/N 80M7883-UP
PART OF 206-2630 PUMP GP-FUEL INJECTION
FIELD REPLACEMENT ORDER @@@@@232-1183@@@@@, 1-115-3598 ADAPTER-INJECTION, 1-116-7222 SEAL-RECTANGULAR, 2-136-1869 BOLT-SOCKET HEAD
i02269432 SEBP5257
2321168 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-3598 [1] ADAPTER-INJECTION  
2. 116-7222 [1] SEAL-RECTANGULAR  
3. 136-1869 [2] BOLT-SOCKET HEAD  
 

#SEBP52570075
 

232-1183: INJECTOR GP-FUEL

232-1183 INJECTOR GP-FUEL
S/N 80M7883-UP
FIELD REPLACEMENT FOR @@@@@232-1168@@@@@
i02271371 SEBP5257
2321183 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-3598 AB [1] ADAPTER-INJECTION  
2. 116-7222 AB [1] SEAL-RECTANGULAR  
3. 136-1869 AB [2] BOLT-SOCKET HEAD  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP52570076
 

138-6256: KIT-SEAL

138-6256 KIT-SEAL -UNIT INJECTOR HYDRAULIC PUMP
S/N 80M7883-UP
PART OF 235-2026 PUMP GP-UNIT INJECTOR HYD
i01166964 SEBP5257
1386256 KIT-SEAL Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-9685 [4] SEAL-O-RING  
2. 033-5853 [3] SEAL-O-RING  
3. 109-3206 [1] SEAL-O-RING  
4. 033-6042 [4] SEAL-O-RING  
5. 108-5803 [1] SEAL-O-RING  
6. 6V-5142 [2] SEAL-O-RING  
7. 9X-7680 [6] SEAL-O-RING  
8. 033-6027 [2] SEAL-O-RING  
9. 033-6039 [1] SEAL-O-RING  
10. 133-1705 [1] GASKET-HOUSING  
11. 6V-8676 [1] SEAL-O-RING  
12. 135-2655 [2] SEAL-O-RING  
13. 135-2652 [1] SEAL-O-RING  
 

#SEBP52570077
 

114-5212: LINES GP-FUEL FILTER

114-5212 LINES GP-FUEL FILTER
S/N 80M7883-8517
i00090240 SEBP5257
1145212 LINES GP-FUEL FILTER Parts scheme 1145212 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-4649 [1] SPACER (0.516X1X1-IN THK)  
2. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
3. 1R-0749 [2] FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY)  
4. 2H-9233 [1] SPACER (0.563X1X1-IN THK)  
5. 6N-2946 [1] BASE AS-FUEL FILTER  
  6V-5049 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
  9S-4167 [2] STUD-HOLLOW (1-14X1.47-IN)  
6. 6N-4414 [1] COVER-FILTER BASE  
7. 8N-9798 [1] PLATE  
8. 102-2240 Y [1] SENSOR GP-TEMPERATURE (3-PIN)(FUEL)  
9. 102-7535 Y [1] VALVE GP-CHECK (FUEL)  
10. 115-4316 [1] TUBE AS  
11. 115-4317 [1] TUBE AS  
12. 116-5819 [1] BRACKET  
13. 119-0960 [1] BRACKET  
14. 123-0555 [1] MANIFOLD  
15. 125-6795 I [1] HOSE AS  
16. 125-6796 I [1] HOSE AS  
17. 125-6797 I [1] HOSE AS  
18. 125-6798 I [1] HOSE AS  
19. 125-6799 I [1] HOSE AS  
20. 033-6033 [4] SEAL-O-RING  
21. 098-5687 [1] TEE  
22. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
23. 0S-1594 [6] BOLT (3/8-16X1-IN)  
24. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
25. 1B-3057 [2] CLIP  
26. 1B-9575 [2] BOLT (5/16-18X1.56-IN)  
27. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
28. 1S-6420 [3] CLIP  
29. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 6V-5048 [1] SEAL-O-RING  
33. 6V-5049 [17] SEAL-O-RING  
34. 6V-8634 [1] CONNECTOR  
35. 6V-8636 [3] CONNECTOR  
36. 6V-8724 [2] ELBOW  
37. 6V-9873 [2] CONNECTOR  
38. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
39. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
40. 8L-2779 [8] SEAL-O-RING  
41. 8L-2786 [3] SEAL-O-RING  
42. 8T-6876 [2] ELBOW  
43. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9S-1366 [1] BOLT (1/2-13X2.5-IN)  
45. 9S-4182 [1] PLUG (7/16-20-THD)  
46. 9S-4191 [4] PLUG (9/16-18-THD)  
47. 9S-8004 [4] PLUG (9/16-18-THD)  
48. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
49. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 9X-8874 [2] BOLT (1/2-13X3-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP52570078
 

114-5212: LINES GP-FUEL FILTER

114-5212 LINES GP-FUEL FILTER
S/N 80M8518-UP
i02527204 SEBP5257
1145212 LINES GP-FUEL FILTER Parts scheme 1145212 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-4649 [1] SPACER (0.516X1X1-IN THK)  
2. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
3. 1R-0749 [2] FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY)  
4. 2H-9233 [1] SPACER (0.563X1X1-IN THK)  
5. 6N-2946 [1] BASE AS-FUEL FILTER  
  6V-5049 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
  9S-4167 [2] STUD-HOLLOW (1-14X1.47-IN)  
6. 6N-4414 [1] COVER-FILTER BASE  
7. 8N-9798 [1] PLATE  
8. 102-2240 Y [1] SENSOR GP-TEMPERATURE (3-PIN)(FUEL)  
9. 282-1915 CY [1] VALVE GP-CHECK (FUEL)  
10. 115-4316 [1] TUBE AS  
11. 115-4317 [1] TUBE AS  
12. 116-5819 [1] BRACKET  
13. 119-0960 [1] BRACKET  
14. 123-0555 [1] MANIFOLD  
15. 125-6795 I [1] HOSE AS  
16. 125-6796 I [1] HOSE AS  
17. 125-6797 I [1] HOSE AS  
18. 125-6798 I [1] HOSE AS  
19. 125-6799 I [1] HOSE AS  
20. 033-6033 [4] SEAL-O-RING  
21. 098-5687 [1] TEE  
22. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
23. 0S-1594 [6] BOLT (3/8-16X1-IN)  
24. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
25. 1B-3057 [2] CLIP  
26. 1B-9575 [2] BOLT (5/16-18X1.56-IN)  
27. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
28. 1S-6420 [3] CLIP  
29. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 6V-5048 [1] SEAL-O-RING  
33. 6V-5049 [17] SEAL-O-RING  
34. 6V-8634 [1] CONNECTOR  
35. 6V-8636 [3] CONNECTOR  
36. 6V-8724 [2] ELBOW  
37. 6V-9873 [2] CONNECTOR  
38. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
39. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
40. 8L-2779 [8] SEAL-O-RING  
41. 8L-2786 [3] SEAL-O-RING  
42. 8T-6876 [2] ELBOW  
43. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9S-1366 [1] BOLT (1/2-13X2.5-IN)  
45. 9S-4182 [1] PLUG (7/16-20-THD)  
46. 9S-4191 [4] PLUG (9/16-18-THD)  
47. 9S-8004 [4] PLUG (9/16-18-THD)  
48. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
49. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 9X-8874 [2] BOLT (1/2-13X3-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP52570079
 

109-0399: LINES GP-INJECTOR HYD PUMP

109-0399 LINES GP-INJECTOR HYD PUMP
S/N 80M7883-UP
i00090230 SEBP5257
1090399 LINES GP-INJECTOR HYD PUMP Parts scheme
  For full view, you need register

Parts for your 990 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-3202 [1] TUBE AS  
2. 280-7460 [1] TUBE AS  
3. 2S-9503 [1] SPACER (0.406X1X0.875-IN THK)  
4. 0L-1143 [3] BOLT (3/8-16X2.5-IN)  
5. 9L-9132 [1] WASHER (10.2X25.5X2.5-MM THK)  
6. 234-8937 [1] SEAL-INTEGRAL  
7. 6V-9009 [1] ELBOW  
8. 5P-7815 [1] SEAL-O-RING  
9. 9X-7734 [1] SEAL-O-RING  
10. 6V-8626 [1] ELBOW  
11. 152-2939 [2] SEAL-O-RING  
12. 152-2938 [4] SEAL-O-RING  
13. 6V-5134 [1] SEAL-O-RING  
14. 162-2501 I [1] HOSE AS  
15. 6V-9003 [1] ELBOW  
16. 113-1921 [1] ELBOW  
17. 8S-0023 [1] CLIP (SLOT)  
18. 8S-0024 [1] CLIP (TAB)  
19. 258-8917 [1] SLEEVE-PROTECTION  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Inlet Air And Exhaust Lines
3412C ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger
3412C ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Testing and Adjusting
Turbocharger - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Turbochargers
SUPPLEMENT FOR 990 WHEEL LOADER - 3412C ENGINE
Turbochargers
3412 ENGINE FOR 990 WHEEL LOADER
Turbocharger - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Seal Used In Air Lines Group {1058}
1994/03/21
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/06/27
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 990 :

TURBOCHARGER GP
218-0891 TURBOCHARGER GP
MUFFLER GP
296-7758 MUFFLER GP
MANIFOLD GP-EXHAUST
179-7026 MANIFOLD GP-EXHAUST
LINES GP-AIR
6I-4659 LINES GP-AIR
LINES GP-AIR
300-0436 LINES GP-AIR
LINES GP-AIR
122-4306 LINES GP-AIR
299-6332 CONVERSION GP-AIR INLET & EXH
CARTRIDGE GP-TURBOCHARGER
218-0890 CARTRIDGE GP-TURBOCHARGER
DRIVE GP-UNIT INJ HYD PUMP
125-3431 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
180-6644 DRIVE GP-UNIT INJ HYD PUMP
FILTER GP-WATER SEP & FUEL
131-0463 FILTER GP-WATER SEP & FUEL
INJECTOR GP-FUEL
232-1168 INJECTOR GP-FUEL
INJECTOR GP-FUEL
232-1183 INJECTOR GP-FUEL
KIT-SEAL
138-6256 KIT-SEAL
LINES GP-FUEL FILTER
114-5212 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
114-5212 LINES GP-FUEL FILTER

Truck sale:

Caterpillar 990K, Wheel Loaders, Construction
883,411 
Caterpillar 990K, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Caterpillar 990K, Wheel Loaders, Construction
983,629 
Caterpillar 990K, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
Caterpillar 990, Wheel Loaders, Construction
31,930 
Caterpillar 990, Wheel Loaders, Construction
- Wheel Loaders
EMPIRE MACHINERY
Caterpillar 990K, Wheel Loaders, Construction
970,021 
Caterpillar 990K, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
Caterpillar 990, Wheel Loaders, Construction
64,190 
Caterpillar 990, Wheel Loaders, Construction
- Wheel loaders
WILLIAM ADAMS PTY. LTD.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.