ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGCONNECTION GP
SHUTOFF GP
GLOW PLUG GP
SHUTOFF GP
STARTING MOTOR GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING#SEBP52830120
450-1439: ALTERNATOR GP-CHARGING
450-1439 ALTERNATOR GP-CHARGING
12 VOLT, 60 AMP
12 VOLT, 60 AMP
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [1] | NUT (M8X1.25-THD) | |
| 2. | 153-6375 M | [1] | BOLT (M8X1.25X16-MM) | |
| 3. | 155-7984 | [1] | WASHER (8.4X16X1.6-MM THK) | |
| 4. | 163-5372 | [1] | WASHER (8X15.4X4-MM THK) | |
| 5. | 289-5972 | [1] | ALTERNATOR | |
| 6. | 289-5974 | [1] | PLATE | |
| 7. | 289-5975 | [1] | BOLT | |
| 8. | 289-5977 | [1] | BOLT | |
| 9. | 289-5978 | [1] | COLLAR | |
| M | METRIC PART | |||
#SEBP52830121
308-2319: CONNECTION GP-ELECTRICAL
308-2319 CONNECTION GP-ELECTRICAL
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP52830122
321-6741: CONNECTION GP-ELECTRICAL
321-6741 CONNECTION GP-ELECTRICAL
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 254-5541 | [1] | CONNECTION AS |
#SEBP52830123
367-6778: CONTROL GP-MANUAL START/STOP
367-6778 CONTROL GP-MANUAL START/STOP
Type 1
Type 1
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 3. | 153-5592 M | [1] | NUT (M8X1.25-THD) | |
| 4. | 153-6415 | [2] | WASHER | |
| 5. | 153-7983 | [1] | PIN | |
| 6. | 095-1574 | [1] | SEAL-O-RING | |
| 7. | 369-4486 M | [2] | BOLT (M6X1X35-MM) | |
| 8. | 162-2207 M | [1] | NUT | |
| 9. | 106-8916 M | [4] | BOLT (M6X16-MM) | |
| 10. | 217-7115 | [1] | CAP (TAMPER RESISTANT) | |
| 11. | 423-7724 | [1] | GASKET | |
| 12. | 308-1882 | [1] | SPRING | |
| 13. | 308-1889 M | [1] | NUT (M10X1.25-THD) | |
| 14. | 308-1892 M | [1] | NUT (M6X1-THD) | |
| 15. | 308-1897 | [2] | RING | |
| 17. | 308-4266 | [1] | SHAFT | |
| 18. | 390-3731 | [1] | SHAFT | |
| 19. | 309-6729 | [1] | SEAL-O-RING | |
| 20. | 322-1379 | [1] | BOLT | |
| 21. | 311-0655 | [1] | SPRING | |
| 22. | 313-5832 | [1] | BOLT AS | |
| 22A. | 153-7987 | [1] | WASHER | |
| 22B. | 191-9297 M | [1] | NUT (M10X1.25-THD) | |
| 22C. | 313-5833 | [1] | SPRING | |
| 23. | 367-6747 | [1] | SPRING | |
| 24. | 313-2025 M | [1] | BOLT-SPECIAL (M10X1.25-MM THD) | |
| 25. | 321-4249 | [1] | NUT | |
| 26. | 390-3729 | [1] | LEVER-CONTROL | |
| 27. | 324-3397 | [1] | LEVER-CONTROL | |
| 29. | 425-7065 | [1] | CAP-TAMPER PROOF | |
| 30. | 334-0732 | [1] | ARM (FRONT HOUSING) | |
| 31. | 335-5578 | [1] | BRACKET | |
| 32. | 336-2965 | [1] | SPRING | |
| M | METRIC PART | |||
#SEBP52830124
367-6778: CONTROL GP-MANUAL START/STOP
367-6778 CONTROL GP-MANUAL START/STOP
Type 2
Type 2
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 2. | 153-5592 M | [1] | NUT (M8X1.25-THD) | |
| 3. | 153-6415 | [2] | WASHER | |
| 4. | 153-7983 | [1] | PIN | |
| 5. | 095-1574 | [1] | SEAL-O-RING | |
| 6. | 369-4486 M | [2] | BOLT (M6X1X35-MM) | |
| 7. | 162-2207 M | [1] | NUT | |
| 8. | 106-8916 M | [4] | BOLT (M6X16-MM) | |
| 9. | 217-7115 | [1] | CAP (TAMPER RESISTANT) | |
| 10. | 423-7724 | [1] | GASKET | |
| 11. | 308-1882 | [1] | SPRING | |
| 12. | 308-1889 M | [1] | NUT (M10X1.25-THD) | |
| 13. | 308-1892 M | [1] | NUT (M6X1-THD) | |
| 14. | 308-4266 | [1] | SHAFT | |
| 15. | 390-3731 | [1] | SHAFT | |
| 16. | 309-6729 | [1] | SEAL-O-RING | |
| 17. | 322-1379 | [1] | BOLT | |
| 18. | 311-0655 | [1] | SPRING | |
| 19. | 313-5832 | [1] | BOLT AS | |
| 19A. | 153-7987 | [1] | WASHER | |
| 19B. | 191-9297 M | [1] | NUT (M10X1.25-THD) | |
| 19C. | 313-5833 | [1] | SPRING | |
| 20. | 367-6747 | [1] | SPRING | |
| 21. | 313-2025 M | [1] | BOLT-SPECIAL (M10X1.25-MM THD) | |
| 22. | 502-9478 C | [1] | NUT | |
| 23. | 390-3729 | [1] | LEVER-CONTROL | |
| 24. | 324-3397 | [1] | LEVER-CONTROL | |
| 25. | 334-0732 | [1] | ARM (FRONT HOUSING) | |
| 26. | 335-5578 | [1] | BRACKET | |
| 27. | 336-2965 | [1] | SPRING | |
| 28. | 502-5421 C | [1] | PIN | |
| 29. | 503-9707 C | [1] | CAP | |
| 30. | 503-9731 C | [1] | SHROUD | |
| 31. | 308-1897 C | [1] | RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP52830125
311-9218: GLOW PLUG GP
311-9218 GLOW PLUG GP
PART OF 449-2029, 449-2039, 449-2767, 449-2777 CYLINDER BLOCK GP-LONG
Type 1
PART OF 449-2029, 449-2039, 449-2767, 449-2777 CYLINDER BLOCK GP-LONG
Type 1
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP52830126
311-9218: GLOW PLUG GP
311-9218 GLOW PLUG GP
PART OF 449-2029, 449-2039, 449-2767, 449-2777 CYLINDER BLOCK GP-LONG
Type 2
PART OF 449-2029, 449-2039, 449-2767, 449-2777 CYLINDER BLOCK GP-LONG
Type 2
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP52830127
320-9114: SHUTOFF GP-ELECTRICAL
320-9114 SHUTOFF GP-ELECTRICAL
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP52830128
450-1546: SOLENOID GP-SHUTOFF
450-1546 SOLENOID GP-SHUTOFF
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP52830129
311-9195: STARTING MOTOR GP-ELECTRIC
311-9195 STARTING MOTOR GP-ELECTRIC
Parts for your C0.7 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 543-5428 | [1] | STARTING MOTOR AS |
Information:
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Special Instruction
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Testing and Adjusting
Disassembly and Assembly
Alternator - Remove and Install - 14 Amp and 15 Amp Alternators
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
Alternator - Remove and Install - 40 Amp Alternator
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
Alternator - Remove and Install - 55 Amp Alternator
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
Alternator - Remove and Install - 65 Amp and 85 Amp Alternators
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}