6L-4502 CHART-PLATE & FILM C32 MARINE ENGINE

Part No	Qty	Parts name
106-8602	[1]	FILM (COOLANT INFORMATION)
		INSTALL ON TOP CENTER SURFACE OF EXPANSION TANK OR HEAT EXCHANGER.
	[1]	FILM GP
		CONTACT YOUR LOCAL DEALER.
		INSTALL ON SERVICE SIDE OF ENGINE ON THE EXHAUST MANIFOLD UNDER THE CENTER VALVE COVER.
		INSTALL LAMINATE OVER SILVER FILM.
7E-8050	[1]	FILM GP (EPA CERTIFICATION)
		CONTACT YOUR LOCAL DEALER.
		INSTALL IN A VISIBLE LOCATION ON THE TUBING FROM THE SEA WATER OUTLET TO THE AFTERCOOLER INLET.
		INSTALL LAMINATE 178-0478 OVER FILM.
	[1]	FILM GP (CERTIFICATION)
		INSTALL ON SERVICE SIDE OF ENGINE ON THE EXHAUST MANIFOLD BETWEEN THE IMO LABEL & THE ENGINE INFO LABEL.
		INSTALL LAMINATE OVER SILVER FILM.
233-0060	[2]	FILM-IDENTIFICATION (LIFT EYE LOCATION)
		INSTALL ON INSIDE SURFACE OF LIFTING EYES, JUST BELOW EYES.
332-1843	[1]	FILM-WARNING (UNIVERSAL, READ OMM)
224-8945	[2]	FILM-WARNING (DO NOT USE ETHER, U.S.)
		INSTALL CENTERED ON AIR CLEANER COVER IF APPLICABLE.
225-4257	[1]	FILM-WARNING (HOT FLUID UNDER PRESS)
		INSTALL ON TOP SURFACE OF EXPANSION TANK OR HEAT EXCHANGER.
225-4256	[1]	FILM-WARNING (HOT FLUID UNDER PRESSURE, U.S.)
332-1844	[1]	FILM-WARNING (HOT FLUID UNDER PRESSURE)
228-3581	[3]	FILM-WARNING (DO NOT OPERATE, READ OMM)
		INSTALL ONE ON LH & RH VALVE COVER BASE TOWARDS FRONT OF ENGINE. ON TOP SURFACE OF INSTRUMENT PANEL BOX.
115-5852		PLATE & FILM GP (ENGINE INFORMATION)
		CONTACT YOUR LOCAL DEALER.
		INSTALL ON SERVICE SIDE OF ENGINE ON SURFACE OF EXHAUST MANIFOLD NEAR REAR OF ENGINE.
		INSTALL LAMINATE OVER SILVER FILM.
3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
		CONTACT YOUR LOCAL DEALER.
		REFLATTEN AFTER STAMPING.
		INSTALL ON LH SIDE OF BLOCK NEAR FRONT FACE AT BOTTOM OF WATER JACKET USING LOCTITE COMPANY DEPEND ADHESIVE.
		STAMP SERIAL NUMBER IN BLOCK JUST BELOW PLATE IN FIGURES 6 HIGH.

#SEBP52850531

352-9860: FILM GP

FILM GP

352-9860 FILM GP -ENGINE
S/N RNZ1-UP
AN ATTACHMENT

i03792252 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	8L-8413	[2]	STRAP-CABLE (WHITE)
	353-2691	[1]	TAG (DECLARATION OF INCORPORATION)

#SEBP52850532

258-8117: KIT-GASKET

KIT-GASKET

258-8117 KIT-GASKET -SINGLE CYLINDER LINER
S/N RNZ1-UP
CONTAINS SEALS TO REINSTALL ONE CYLINDER LINER
FIELD INSTALLATION

i04536003 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
9L-5854	[1]	BAND-FILLER (130.2-MM ID)
155-0809	[1]	SEAL-LINER
155-0810	[1]	SEAL-LINER
155-2793	[1]	SEAL-LINER

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52850533

360-4169: KIT-GASKET

KIT-GASKET

360-4169 KIT-GASKET -CENTRAL AND LOWER STRUCTURE
CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FOR USE WITH ENGINE ARRANGEMENTS 331-0715 THRU 331-0726, ENGINE ARRANGEMENTS 326-6216 THRU 326-6223, ENGINE S/N RNZ1-UP, RNR1-UP
FIELD INSTALLATION

i04534644 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
234-8937	[1]	SEAL-INTEGRAL
236-1525	[1]	SEAL-INTEGRAL
239-5571	[1]	SEAL-INTEGRAL (CYLINDER BLOCK)
239-5572	[1]	SEAL-INTEGRAL
3P-0650	[1]	SEAL-O-RING
5P-8068	[1]	SEAL-O-RING
6V-3830	[1]	SEAL-O-RING
6V-5048	[2]	SEAL-O-RING
6V-5063	[1]	SEAL-O-RING
6V-5064	[1]	SEAL-O-RING
119-5155	[4]	SEAL-O-RING

#SEBP52850534

360-4170: KIT-GASKET

KIT-GASKET

360-4170 KIT-GASKET
CONTAINS GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH E920- ENGINE S/N RND1-UP, RNY1-UP, E977- ENGINE S/N RNE1-UP, RNX1-UP, E996- ENGINE S/N RNR1-UP, RNZ1-UP
FIELD INSTALLATION

i04537993 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
7W-5648	[1]	GASKET
214-1727	[1]	GASKET (CYLINDER BLOCK)
239-1139	[2]	SEAL
142-5867	[1]	SEAL-CRANKSHAFT (FRONT)
239-5571	[1]	SEAL-INTEGRAL (CYLINDER BLOCK)
5E-8771	[2]	SEAL-O-RING
5F-3999	[1]	SEAL-O-RING
6V-3250	[1]	SEAL-O-RING
6V-4589	[1]	SEAL-O-RING
6V-6609	[1]	SEAL-O-RING
8T-1703	[2]	SEAL-O-RING
9X-7371	[1]	SEAL-O-RING
109-0076	[2]	SEAL-O-RING
112-1102	[2]	SEAL-O-RING
112-1579	[1]	SEAL-O-RING
112-1580	[1]	SEAL-O-RING
117-8801	[2]	SEAL-O-RING
205-4832	[1]	SEAL-O-RING
228-4947	[2]	SEAL-O-RING
231-4708	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52850535

360-4171: KIT-GASKET

KIT-GASKET

360-4171 KIT-GASKET
CONTAINS GASKET, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH E920- ENGINE S/N RND1-UP, RNY1-UP, E977- ENGINE S/N RNE1-UP, RNX1-UP, E996- ENGINE S/N RNR1-UP, RNZ1-UP, GS471-
FIELD INSTALLATION

i04537982 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-8872	[1]	GASKET
226-4753	[1]	GASKET
9Y-6089	[2]	GASKET
225-1242	[1]	GASKET (FLYWHEEL HOUSING)
161-7293	[1]	GASKET-CYLINDER
142-5868	[1]	SEAL-CRANKSHAFT (REAR)(REAR)
234-8937	[2]	SEAL-INTEGRAL
280-4155	[2]	SEAL-INTEGRAL
5E-8771	[2]	SEAL-O-RING
5P-7701	[1]	SEAL-O-RING
5P-7814	[2]	SEAL-O-RING
5P-7815	[1]	SEAL-O-RING
6V-3319	[1]	SEAL-O-RING
6V-5048	[3]	SEAL-O-RING
6V-5050	[2]	SEAL-O-RING
8C-3089	[1]	SEAL-O-RING
8L-2786	[3]	SEAL-O-RING
061-8639	[1]	SEAL-O-RING
061-9455	[1]	SEAL-O-RING
117-8801	[2]	SEAL-O-RING
227-5538	[3]	SEAL-O-RING
231-4708	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52850536

360-4173: KIT-GASKET

KIT-GASKET

360-4173 KIT-GASKET -TURBOCHARGER
S/N RNZ101-UP
CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. MOUNTING HARDWARE INCLUDED: BOLTS, NUTS, STUDS,. WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP
FOR USE WITH ENGINE ARRANGEMENT 326-6216 THRU 326-6223, RNZ00101-UP
FIELD INSTALLATION

i04533955 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
7M-7273	[2]	GASKET (TURBOCHARGER)
7N-7559	[2]	GASKET
7N-7628	[8]	GASKET
7N-8875	[2]	GASKET
226-4753	[2]	GASKET
2N-2766	[8]	LOCKNUT (3/8-16-THD)
3J-7354	[2]	SEAL-O-RING
6V-3250	[4]	SEAL-O-RING
6V-4589	[2]	SEAL-O-RING
6V-6609	[4]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
112-3540	[4]	SEAL-O-RING
180-8424	[6]	SEAL-O-RING
228-7090	[2]	SEAL-O-RING

#SEBP52850537

360-5100: KIT-GASKET

KIT-GASKET

360-5100 KIT-GASKET -TURBOCHARGER
CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES. TURBO MOUNTING HARDWARE WILL BE. INCLUDED: BOLTS, NUTS, STUDS WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP
FOR USE WITH E920- ENGINE S/N RND1-UP, RNY1-UP, E977- ENGINE S/N RNE1-UP, RNX1-UP, E996- ENGINE S/N RNR1-UP, RNZ1-UP
FIELD INSTALLATION

i04537999 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
7M-7273	[1]	GASKET (TURBOCHARGER)
226-4753	[2]	GASKET
2N-2766	[7]	LOCKNUT (3/8-16-THD)
126-2702	[2]	SEAL-INTEGRAL
198-6068	[2]	SEAL-INTEGRAL
6V-4589	[2]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
112-3540	[2]	SEAL-O-RING
114-2687	[2]	SEAL-O-RING
205-4831	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52850538

360-5708: KIT-GASKET

KIT-GASKET

360-5708 KIT-GASKET
S/N RNR1-115
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD, KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS, ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@311-4062@@@@@, @@@@@311-4063@@@@@, RNR1-115, RNR1-115
FIELD INSTALLATION

i04381035 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
7C-0307	[2]	GASKET (REGULATOR HOUSING, OUTLET)
7N-7559	[2]	GASKET
7N-7628	[8]	GASKET
7N-8875	[2]	GASKET
226-4753	[2]	GASKET
226-5613	[1]	GASKET
241-8156	[1]	GASKET
225-3099	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
225-3101	[1]	GASKET-PLATE
3E-6772	[24]	SEAL (WATER)
222-6456	[1]	SEAL (VALVE COVER BASE)
6V-0128	[1]	SEAL-CONNECTOR
229-5332	[1]	SEAL
3E-6773	[2]	SEAL-O-RING
5P-8356	[2]	SEAL-O-RING
6K-6307	[4]	SEAL-O-RING
6L-7817	[2]	SEAL-O-RING
6V-3250	[4]	SEAL-O-RING
6V-4589	[2]	SEAL-O-RING
6V-5064	[1]	SEAL-O-RING
6V-6609	[7]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
8C-3089	[3]	SEAL-O-RING
8L-2777	[12]	SEAL-O-RING
8T-0315	[2]	SEAL-O-RING
9X-7430	[1]	SEAL-O-RING
033-6031	[2]	SEAL-O-RING
109-0076	[4]	SEAL-O-RING
109-0092	[2]	SEAL-O-RING
112-3540	[2]	SEAL-O-RING
114-4427	[2]	SEAL-O-RING
166-2904	[6]	SEAL-O-RING
180-8424	[6]	SEAL-O-RING
205-4831	[2]	SEAL-O-RING
214-7568	[6]	SEAL-O-RING
228-7090	[2]	SEAL-O-RING
231-4708	[2]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
163-2478	[24]	SEAL-VALVE STEM

#SEBP52850539

360-5709: KIT-GASKET

KIT-GASKET

360-5709 KIT-GASKET -TURBOCHARGER
S/N RNR1-115
CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBO AND ATTACHING LINES. TURBO MOUNTING HARDWARE INCLUDED BOLTS, NUTS. STUDS,WASHERS, SPACERS.
FOR USE WITH @@@@@311-4062@@@@@, @@@@@311-4063@@@@@, E996 S/N RNR 100-115, E996 S/N RNR 100-115
FIELD INSTALLATION

i04534646 SEBP5285

For full view, you need register

Parts for your C32 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
7M-7273	[2]	GASKET (TURBOCHARGER)
7N-7559	[2]	GASKET
7N-7628	[8]	GASKET
7N-8875	[2]	GASKET
226-4753	[2]	GASKET
2N-2766	[8]	LOCKNUT (3/8-16-THD)
3E-6773	[2]	SEAL-O-RING
6K-6307	[4]	SEAL-O-RING
6L-7817	[2]	SEAL-O-RING
6V-3250	[4]	SEAL-O-RING
6V-4589	[2]	SEAL-O-RING
6V-5064	[1]	SEAL-O-RING
6V-6609	[4]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
8C-3089	[2]	SEAL-O-RING
8T-0315	[4]	SEAL-O-RING
112-3540	[2]	SEAL-O-RING
180-8424	[6]	SEAL-O-RING
205-4831	[2]	SEAL-O-RING
228-7090	[2]	SEAL-O-RING
231-4708	[2]	SEAL-O-RING