269-2509 HOUSING GP-FRONT S/N WJW1-UP FOR USE WITH RADIATOR GROUP, LEFT HAND COOLANT CONDITIONER GROUP CANNOT BE USED WITH TWIN TURBO APPLICATION C18

BASIC ENGINE

GEAR GP

0. 269-2509 HOUSING GP
1. 440-5320 HOUSING GP

CRANKSHAFT GP

2. 243-6718 KIT-CRANKS

ENGINE ARRANGEMENT

ENGINE AR

3. 468-5553 KIT-ENGINE
4. 468-5561 KIT-ENGINE
5. 468-5746 KIT-ENGINE
6. 468-7272 KIT-ENGINE
7. 468-7363 KIT-ENGINE
8. 468-7942 KIT-ENGINE
9. 471-2053 KIT-ENGINE
0. INFORMATION

PETROLEUM ENGINE C18 PETROLEUM ENGINE WJW
C18 Petroleum Engine WJW00001-UP SEBP5292 C18 WJW (2007)

BASIC ENGINE

GEAR GP

353-0186 GEAR GP-CAMSHAFT

207-0449 GEAR GP-FRONT

147-3754 GEAR GP-REAR

186-2377 HOUSING GP-FRONT

224-1229 HOUSING GP-FRONT

241-0164 HOUSING GP-FRONT

241-0478 HOUSING GP-FRONT

269-2509 HOUSING GP-FRONT

440-5320 HOUSING GP-FRONT

#SEBP52920170

269-2509: HOUSING GP-FRONT

HOUSING GP-FRONT

269-2509 HOUSING GP-FRONT
S/N WJW1-UP
FOR USE WITH RADIATOR GROUP, LEFT HAND COOLANT CONDITIONER GROUP
CANNOT BE USED WITH TWIN TURBO APPLICATION

i02532503 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	155-9524	[1]	SEAL-INTEGRAL
2.	166-9144	[1]	GASKET
3.	175-1483	[1]	HOUSING AS-FRONT
3A.	3E-8044	[1]	STUD (1/2-13X2.95-IN)
4.	353-9982 Y	[1]	PLATE AS-FRONT HOUSING
5.	0L-2070	[1]	BOLT (3/8-16X2.25-IN)
6.	0S-1588 C	[4]	BOLT (3/8-16X1.25-IN)(MARKED X)
7.	0T-0055	[1]	BOLT (3/8-16X4.25-IN)
8.	5M-2894 C	[15]	WASHER-HARD (10.2X18.5X2.5-MM THK)(MARKED X)
9.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
10.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP52920171

440-5320: HOUSING GP-FRONT

HOUSING GP-FRONT

440-5320 HOUSING GP-FRONT
FOR USE WITH @@@@@118-4914@@@@@

i05354655 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	155-9524	[1]	SEAL-INTEGRAL
2.	166-9144	[1]	GASKET
3.	241-0478 Y	[1]	HOUSING GP-FRONT
4.	353-9982 Y	[1]	PLATE AS-FRONT HOUSING
5.	0L-2070	[1]	BOLT (3/8-16X2.25-IN)
6.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
7.	5M-2894	[14]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
9.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
	Y		SEPARATE ILLUSTRATION

#SEBP52920172

243-6718: KIT-CRANKSHAFT BEARING

KIT-CRANKSHAFT BEARING

243-6718 KIT-CRANKSHAFT BEARING
S/N WJW1-UP

i02117273 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	317-8766	[7]	BEARING-MAIN (STANDARD)
	253-1752	[2]	PLATE-THRUST (CRANKSHAFT)

#SEBP52920173

468-5553: KIT-ENGINE GASKET

KIT-ENGINE GASKET

468-5553 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP & BLOCK COVERS
PART OF 469-1700 KIT-ENGINE OVERHAUL

i06243491 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST
4N-0699	[3]	GASKET
345-0412	[2]	GASKET
165-6170	[3]	PLUG
126-4935	[1]	SEAL-INTEGRAL (WATER TEMPERATURE REGULATOR)
3J-7354	[1]	SEAL-O-RING
5P-5846	[3]	SEAL-O-RING
5P-8068	[3]	SEAL-O-RING
6V-6609	[3]	SEAL-O-RING
118-5068	[2]	SEAL-O-RING
121-0145	[3]	SEAL-O-RING
210-9246	[1]	SEAL-O-RING
214-7566	[3]	SEAL-O-RING
214-7568	[1]	SEAL-O-RING
238-5080	[7]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52920174

468-5561: KIT-ENGINE GASKET

KIT-ENGINE GASKET

468-5561 KIT-ENGINE GASKET -REAR COVER
CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
PART OF 469-1700 KIT-ENGINE OVERHAUL

i06243520 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
2A-1162	[1]	GASKET (DRAIN PLUG)
4H-7869	[2]	GASKET
5H-0244	[1]	GASKET
9Y-6089	[1]	GASKET
155-5619	[1]	GASKET (FLYWHEEL HOUSING)
142-5868	[1]	SEAL-CRANKSHAFT (REAR)(REAR)
234-8937	[1]	SEAL-INTEGRAL
4N-1230	[1]	SEAL-O-RING
9X-7371	[1]	SEAL-O-RING
230-3728	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52920175

468-5746: KIT-ENGINE GASKET

KIT-ENGINE GASKET

468-5746 KIT-ENGINE GASKET -SINGLE CYLINDER HEAD
++*CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. ++*KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEAL. ++* ORDER A SINGLE INJECTOR SEAL KIT. ++*AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. ++*THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. ++*APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
PART OF 469-1700 KIT-ENGINE OVERHAUL
FOR USE WITH SEHS0361

i06243495 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
2N-2765	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
1S-4295	[1]	GASKET (TURBOCHARGER)
101-3125	[1]	GASKET (AIR INLET MANIFOLD)
227-1204	[1]	GASKET
359-0908	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
2N-2766	[4]	LOCKNUT (3/8-16-THD)
142-2329	[1]	SEAL
160-7271	[1]	SEAL
272-0390	[1]	SEAL
341-1429	[1]	SEAL
3E-6772	[24]	SEAL (WATER)
6V-0128	[1]	SEAL-CONNECTOR
126-2702	[1]	SEAL-INTEGRAL
198-6068	[1]	SEAL-INTEGRAL
3S-9643	[2]	SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)
5E-8771	[1]	SEAL-O-RING
5P-0840	[2]	SEAL-O-RING
6V-1197	[1]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
6V-6609	[2]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
117-8801	[1]	SEAL-O-RING
167-4407	[1]	SEAL-O-RING
171-4358	[2]	SEAL-O-RING
214-7566	[3]	SEAL-O-RING
214-7568	[10]	SEAL-O-RING
238-5078	[2]	SEAL-O-RING
238-5080	[2]	SEAL-O-RING
194-8124	[6]	SLEEVE AS (EXHAUST PORT)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52920176

468-7272: KIT-ENGINE GASKET

KIT-ENGINE GASKET

468-7272 KIT-ENGINE GASKET -OIL COOLER, LINES
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
PART OF 469-1700 KIT-ENGINE OVERHAUL

i06047455 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST (FLUID SAMPLING VALVE)
125-0434	[2]	SEAL-INTEGRAL
6V-5063	[1]	SEAL-O-RING
8C-5230	[4]	SEAL-O-RING
109-0077	[2]	SEAL-O-RING
238-5082	[3]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52920177

468-7363: KIT-ENGINE GASKET

KIT-ENGINE GASKET

468-7363 KIT-ENGINE GASKET -WATER PUMP
S/N WJW1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES

i06071460 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
125-0434	[1]	SEAL-INTEGRAL
109-0077	[1]	SEAL-O-RING
122-3772	[1]	SEAL-O-RING
171-4358	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52920178

468-7942: KIT-ENGINE GASKET

KIT-ENGINE GASKET

468-7942 KIT-ENGINE GASKET
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE

i06217282 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
2N-2765	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
1S-4295	[1]	GASKET (TURBOCHARGER)
2N-2766	[4]	LOCKNUT (3/8-16-THD)
126-2702	[2]	SEAL-INTEGRAL
198-6068	[2]	SEAL-INTEGRAL
6V-3251	[1]	SEAL-O-RING
8C-3089	[1]	SEAL-O-RING
114-2687	[2]	SEAL-O-RING
228-7091	[1]	SEAL-O-RING
238-5081	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP52920179

471-2053: KIT-ENGINE GASKET

KIT-ENGINE GASKET

471-2053 KIT-ENGINE GASKET -FRONT COVER
S/N WJW1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET

i06088746 SEBP5292

For full view, you need register

Parts for your C18 PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
166-9144	[1]	GASKET
160-7271	[1]	SEAL
142-5867	[1]	SEAL-CRANKSHAFT (FRONT)
125-0434	[1]	SEAL-INTEGRAL
129-2181	[1]	SEAL-INTEGRAL
155-9524	[1]	SEAL-INTEGRAL
3P-1155	[1]	SEAL-O-RING
5E-8771	[1]	SEAL-O-RING
8T-9527	[1]	SEAL-O-RING
061-9455	[1]	SEAL-O-RING
107-5769	[2]	SEAL-O-RING
109-0077	[1]	SEAL-O-RING
117-8801	[2]	SEAL-O-RING
122-3772	[1]	SEAL-O-RING
171-4358	[2]	SEAL-O-RING
214-7566	[1]	SEAL-O-RING
214-7568	[1]	SEAL-O-RING
228-4947	[2]	SEAL-O-RING
228-7090	[1]	SEAL-O-RING
230-3728	[1]	SEAL-O-RING
238-5078	[2]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
126-1757	[9]	WASHER (10.85X19.3X1.27-MM THK)
129-5427	[2]	WASHER-SPECIAL (SEALING)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED