230-7181 CYLINDER BLOCK AS S/N EHX1-UP PART OF 230-7182 CYLINDER BLOCK AS D10R TRACK-TYPE TRACTOR

BASIC ENGINE

CYLINDER BLOCK GP

0. 230-7181 CYLINDER B
1. 230-7182 CYLINDER B
2. 348-9904 CYLINDER B
3. 348-9905 CYLINDER B
4. 237-0842 CYLINDER B
5. 349-2528 CYLINDER B

CYLINDER HEAD GP

6. 357-7398 CYLINDER H
7. 396-8374 CYLINDER H
8. 284-8895 CYLINDER H
9. 284-8895 CYLINDER H
0. INFORMATION

TRACK-TYPE TRACTOR D10R TRACK-TYPE TRACTOR 3KR
C27 Engine Emissions Retrofit Repower Tier III For D10R Tractor 3KR00001-UP (MACHINE) SEBP5301 D10R 3KR (1995)

BASIC ENGINE

CYLINDER BLOCK GP

235-7135 COVER GP-CYLINDER BLOCK

321-2855 COVER GP-CYLINDER BLOCK

230-7181 CYLINDER BLOCK AS

230-7182 CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS

#SEBP53010020

230-7181: CYLINDER BLOCK AS

CYLINDER BLOCK AS

230-7181 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 230-7182 CYLINDER BLOCK AS

i02043816 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
2.	225-5965	[4]	SLEEVE
3.	225-5966	[1]	SLEEVE
4.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
5.	232-7607	[7]	CAP-CRANKSHAFT
6.	234-6902	[14]	BOLT-12 POINT HEAD (M11X1.25X50-MM)
7.	7W-6492	[2]	PLUG-PIPE (1/2-14-THD)
8.	4N-0685	[1]	BUSHING (1-IN WIDE)
9.	4N-6658	[1]	BUSHING (1.3-IN WIDE)

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB

#SEBP53010021

230-7182: CYLINDER BLOCK AS

CYLINDER BLOCK AS

230-7182 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 237-0842 CYLINDER BLOCK GP

i02043813 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-7181 Y	[1]	CYLINDER BLOCK AS
2.	197-9322	[12]	LINER-CYLINDER BLOCK
3.	9L-5854	[12]	BAND-FILLER (130.2-MM ID)
4.	142-7072	[12]	SEAL-LINER
5.	110-2220	[12]	SEAL-LINER
6.	142-6217	[12]	SEAL-O-RING

	6I-4361 ABF		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABF		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABF		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABF		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABF		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABF		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABF		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABF		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABF		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABF		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABF		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABF		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP53010022

348-9904: CYLINDER BLOCK AS

CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 348-9905 CYLINDER BLOCK AS

i03745300 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
2.	225-5966	[1]	SLEEVE
3.	232-7607	[7]	CAP-CRANKSHAFT
4.	365-4307	[14]	BOLT-12 POINT HEAD (M11X1.25X50-MM)
5.	341-0087	[2]	PLUG AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
6.	4N-0685	[1]	BUSHING (1-IN WIDE)
7.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
9.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)

#SEBP53010023

348-9905: CYLINDER BLOCK AS

CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 349-2528 CYLINDER BLOCK GP

i03745213 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-5854	[12]	BAND-FILLER (130.2-MM ID)
2.	110-2220	[12]	SEAL-LINER
3.	142-6217	[12]	SEAL-O-RING
4.	142-7072	[12]	SEAL-LINER
5.	197-9322	[12]	LINER-CYLINDER BLOCK
6.	348-9904 Y	[1]	CYLINDER BLOCK AS

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB
	Y		SEPARATE ILLUSTRATION

#SEBP53010024

237-0842: CYLINDER BLOCK GP

CYLINDER BLOCK GP

237-0842 CYLINDER BLOCK GP
S/N EHX1-5940

i02041115 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-7182 Y	[1]	CYLINDER BLOCK AS
2.	3B-0645	[1]	PLUG-CUP
3.	5P-8356	[4]	SEAL-O-RING
4.	4N-1650	[4]	DOWEL
5.	225-3101	[2]	GASKET-PLATE
6.	225-3100	[2]	PLATE-SPACER
7.	7C-9614	[4]	PLUG-TAPERLOCK (1-5/8-12-THD)
8.	4N-0683	[4]	DOWEL
9.	214-1728	[1]	STUD (3/8-16, 1/8-27X3.5-IN)
10.	6L-4428	[3]	STUD-TAPERLOCK (3/8-16X4.01-IN)
11.	8T-6757	[2]	PLUG-PIPE
12.	6V-5050	[2]	SEAL-O-RING
13.	9S-8008	[2]	PLUG (1-1/16-12-THD)(1 1/16-12 THD)
14.	240-9543	[14]	WASHER (12.45X22.35X1.82-MM THK)

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
	Y		SEPARATE ILLUSTRATION

#SEBP53010025

349-2528: CYLINDER BLOCK GP

CYLINDER BLOCK GP

349-2528 CYLINDER BLOCK GP
S/N EHX5941-UP

i03838671 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	354-8484	[2]	GASKET-PLATE
2.	240-9543	[14]	WASHER (12.45X22.35X1.82-MM THK)
3.	5P-8356	[4]	SEAL-O-RING
4.	4N-1650	[4]	DOWEL
5.	315-9859	[2]	PLUG AS
			(EACH INCLUDES)
	9S-8008	[1]	PLUG (1-1/16-12-THD)
	238-5082	[1]	SEAL-O-RING
6.	225-3100	[2]	PLATE-SPACER
7.	7C-9614	[4]	PLUG-TAPERLOCK (1-5/8-12-THD)
8.	4N-0683	[4]	DOWEL
9.	214-1728	[1]	STUD (3/8-16, 1/8-27X3.5-IN)
10.	6L-4428	[3]	STUD-TAPERLOCK (3/8-16X4.01-IN)
11.	8T-6757	[1]	PLUG-PIPE
12.	Y	[1]	CYLINDER BLOCK AS
13.	307-2671	[1]	PLUG AS
	9S-8002	[1]	PLUG (7/16-20-THD)
	214-7566	[1]	SEAL-O-RING
14.	3B-0645	[1]	PLUG-CUP

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB
	Y		SEPARATE ILLUSTRATION

#SEBP53010026

357-7398: CYLINDER HEAD AS

CYLINDER HEAD AS

357-7398 CYLINDER HEAD AS
S/N EHX1-UP
PART OF 359-0936 CYLINDER HEAD GP

i04006393 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
	390-0914 AB		BUSHING
3.	263-4920	[6]	SLEEVE-INJECTOR (INLET)
4.	224-3983	[12]	INSERT-SEAT (INLET)(STANDARD)
	314-3063 AB		INSERT-VALVE SEAT (0.55-MM THK)(INLET)
	314-3064 AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
	314-3065 AB		INSERT-VALVE SEAT (0.13-MM OS)(INLET)
	314-3066 AB		INSERT-VALVE SEAT (0.26-MM OS, INLET)
	314-3067 AB		INSERT-VALVE SEAT (0.26-MM OS)(INLET)
	314-3068 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
	314-3069 AB		INSERT-VALVE SEAT (0.51-MM OS)(INLET)
5.	166-2904	[12]	SEAL-O-RING
6.	3B-0623	[36]	PLUG-CUP
7.	3B-0645	[2]	PLUG-CUP
8.	8T-6757	[3]	PLUG-PIPE
9.	9X-7430	[6]	SEAL-O-RING
10.	226-5561	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	288-4883 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP53010027

396-8374: CYLINDER HEAD AS

CYLINDER HEAD AS

396-8374 CYLINDER HEAD AS
S/N EHX1-UP
PART OF 396-8375 CYLINDER HEAD GP

i04941680 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
3.	226-5561	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	288-4883 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
4.	263-4920	[6]	SLEEVE-INJECTOR (INLET)
5.	280-3979	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
	288-4881 AB		INSERT-VALVE SEAT (INLET)(0.51-MM OS)
	288-4882 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
6.	9X-7430	[6]	SEAL-O-RING
7.	166-2904	[12]	SEAL-O-RING
8.	3B-0623	[36]	PLUG-CUP
9.	3B-0645	[2]	PLUG-CUP
10.	8T-6757	[3]	PLUG-PIPE
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP53010028

284-8895: CYLINDER HEAD GP

CYLINDER HEAD GP

284-8895 CYLINDER HEAD GP
S/N EHX1-UP

i02481416 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-6772	[48]	SEAL (WATER)
2.	6I-4025	[32]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1855	[1]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
3.	106-1792	[24]	STUD-TAPERLOCK (3/8-16X4-IN)
4.	106-5673	[20]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1854	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
5.	225-3099	[2]	GASKET-CYLINDER HEAD
6.	248-0036	[26]	BOLT-WASHER HEAD (3/8-16X6-IN)
7.	359-0936 Y	[2]	CYLINDER HEAD GP
8.	183-3407	[10]	PLUG AS
			(EACH INCLUDES)
	9S-8004	[1]	PLUG (9/16-18-THD)
8A.	214-7568	[1]	SEAL-O-RING
9.	353-5126	[4]	PLUG AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	9S-8005	[1]	PLUG (3/4-16-THD)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP53010029

284-8895: CYLINDER HEAD GP

CYLINDER HEAD GP

284-8895 CYLINDER HEAD GP
S/N EHX5941-UP

i04941585 SEBP5301

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	359-1439	[48]	SEAL AS-WATER
2.	6I-4025	[32]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1855	[1]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
3.	106-1792	[24]	STUD-TAPERLOCK (3/8-16X4-IN)
4.	106-5673	[20]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1854	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
5.	225-3099	[2]	GASKET-CYLINDER HEAD
6.	248-0036	[26]	BOLT-WASHER HEAD (3/8-16X6-IN)
7.	396-8375 CY	[2]	CYLINDER HEAD GP
8.	183-3407	[10]	PLUG AS
			(EACH INCLUDES)
	9S-8004	[1]	PLUG (9/16-18-THD)
8A.	214-7568	[1]	SEAL-O-RING
9.	353-5126	[4]	PLUG AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	9S-8005	[1]	PLUG (3/4-16-THD)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Truck Engine News

The Cylinder Liners Have a New Appearance {1216}
2005/03/01

Special Instruction

Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}

Technical Information Bulletin

Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}
Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}

Specifications

Cylinder Block
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines

Tool Operating Manual

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Testing and Adjusting

Cylinder Block - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Disassembly and Assembly

Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner - Install
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner - Remove
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner - Install
C27 and C32 Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25

New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17

Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24

The Cylinder Liners Have a New Appearance {1216}
2005/03/14

Caterpillar Parts SIS Catalog D10R :

225-6052 CRANKSHAFT GP

445-1221 COVER GP-VALVE MECHANISM

321-2854 COVER GP-VALVE MECHANISM

293-4440 COVER GP-REAR HOUSING

321-2855 COVER GP-CYLINDER BLOCK

235-7135 COVER GP-CYLINDER BLOCK

260-9306 CAMSHAFT GP

230-7182 CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS

237-0842 CYLINDER BLOCK GP

349-2528 CYLINDER BLOCK GP

357-7398 CYLINDER HEAD AS

396-8374 CYLINDER HEAD AS

284-8895 CYLINDER HEAD GP

Truck sale:

150,000 USD

Caterpillar D10R, Construction
- Dozers
PETERSON TRACTOR CO

Caterpillar D10R, Construction
- Dozers
GREGORY POOLE EQUIPMENT CO.

160,000

Caterpillar D10R, Construction
- Dozers
QUINN COMPANY

155,000

Caterpillar D10R, Construction
- Dozers
CASHMAN EQUIPMENT CO.

CATERPILLAR D10R 1997
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States