316-9149 GEAR GP-REAR S/N EHX1-UP D10R TRACK-TYPE TRACTOR

316-9149: GEAR GP-REAR

316-9149 GEAR GP-REAR
S/N EHX1-UP

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	4N-0848	[1]	SLEEVE-WEAR
2.	4N-7183	[2]	RING-RETAINING
3.	5B-0213	[6]	BOLT (3/8-16X2.375-IN)
4.	5F-7403	[2]	LOCKWASHER
5.	5F-7404	[2]	LOCKNUT-BEARING
6.	5P-1370	[2]	BEARING AS-ROLLER
7.	102-5861	[2]	PLATE-THRUST
8.	103-0010	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
9.	185-1497	[1]	GEAR AS-IDLER (79-TEETH)
	224-9664	[1]	BUSHING
10.	194-0620	[2]	HOSE AS
11.	217-7219	[2]	ADAPTER-HYDRAULIC PUMP
12.	222-3920	[1]	GEAR (49-TEETH)
13.	224-1219	[1]	SHAFT-STUB
14.	224-1220	[1]	PLATE
15.	224-1221	[1]	SHAFT-STUB
16.	475-5915	[2]	PLATE-SEALING
17.	224-9657	[2]	ADAPTER AS
			(EACH INCLUDES)
	4N-0684	[1]	DOWEL
18.	226-6036	[1]	GEAR AS-IDLER (40/70-TEETH)
	1B-8705	[1]	KEY-WOODRUFF
	226-6052	[1]	BUSHING
19.	227-0159	[1]	SHAFT-STUB
20.	228-5813	[1]	GEAR AS-CRANKSHAFT (49-TEETH)
	4N-0684	[1]	DOWEL
21.	229-1663	[1]	PLATE-THRUST
22.	230-6202	[1]	GEAR AS-IDLER (70/83-TEETH)
	224-9664	[1]	BUSHING
23.	236-4406	[1]	GEAR-HYDRAULIC PUMP DRIVE (49-TEETH)
24.	331-6188	[2]	GEAR AS-CAMSHAFT (56-TEETH)
25.	031-5085	[6]	BOLT-LOCKING (1/4-20X1-IN)
26.	0S-1588	[3]	BOLT (3/8-16X1.25-IN)
27.	117-8801	[2]	SEAL-O-RING
28.	132-5789	[1]	CLIP (LADDER)
29.	1A-2029	[12]	BOLT (3/8-16X1.125-IN)
30.	1T-0720	[12]	BOLT-12 POINT HEAD (3/8-16X1.25-IN)
31.	245-3804	[1]	BOLT (3/8-16X3.5-IN)
32.	297-7956	[2]	ELBOW (INCLUDES SCREEN FILTER)
33.	4P-7428	[2]	CLIP (LADDER)
34.	5E-8771	[2]	SEAL-O-RING
35.	5P-4318	[2]	ELBOW
36.	5P-8429	[2]	SEAL-O-RING
37.	5S-7382	[1]	BOLT (3/8-16X1.375-IN)
38.	6J-3913	[12]	BOLT-12 POINT HEAD (5/8-11X3.25-IN)
39.	502-4034	[1]	SEAL-O-RING
40.	136-7227	[2]	SEAL-O-RING
41.	214-7568	[2]	SEAL-O-RING
42.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
43.	7B-3235	[8]	BOLT (1/2-13X1.375-IN)
	M		METRIC PART

226-0297: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

226-0297 HOUSING GP-FLYWHEEL
S/N EHX1-UP

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7G-9724	[4]	SPACER (10.5X18X19-MM THK)
2.	319-0785 Y	[1]	SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)
3.	225-1242	[1]	GASKET
4.	302-4289	[1]	HOUSING AS-FLYWHEEL
	1W-3136	[1]	BAFFLE
	238-9860	[2]	DOWEL
5.	0S-1619	[2]	BOLT (3/8-16X3-IN)
6.	170-0612	[4]	STUD (3/8-16X4-IN)
7.	231-4470	[2]	BOLT (3/8-16X6.25-IN)
8.	231-4471	[8]	BOLT (1/2-13X6.5-IN)
9.	5B-2638	[14]	BOLT (3/8-16X5.25-IN)
10.	5M-2894	[28]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	5P-7814	[1]	SEAL-O-RING
12.	5P-8245	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	8S-9191	[6]	BOLT (3/8-16X4-IN)
14.	3K-8460	[1]	PLUG (1/2-20-THD)(STRAIGHT THREAD O-RING)
15.	4P-8134	[1]	CLIP (LADDER)(LADDER)
	Y		SEPARATE ILLUSTRATION

238-9862: HOUSING GP-FRONT

HOUSING GP-FRONT

238-9862 HOUSING GP-FRONT
S/N EHX1-UP

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	214-1727	[1]	GASKET (CYLINDER BLOCK)
2.	350-1638	[1]	HOUSING AS-FRONT
2A.	238-9860	[2]	DOWEL
3.	0L-1352	[4]	BOLT (3/8-16X3.25-IN)
4.	2K-4973	[1]	LOCKNUT (3/8-16-THD)
5.	3K-3256	[2]	STUD-TAPERLOCK (3/8-16X1.7-IN)
6.	5M-2894	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)

233-2462: HOUSING GP-REAR

HOUSING GP-REAR

233-2462 HOUSING GP-REAR
S/N EHX1-5940

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	161-7293	[1]	GASKET-CYLINDER
2.	224-5322	[1]	HOSE AS
3.	232-3643	[1]	HOUSING AS-REAR
	4N-0683	[2]	DOWEL
4.	234-4279	[1]	FLANGE
5.	030-7946	[1]	ELBOW
6.	053-2294	[2]	BOLT-12 POINT HEAD (3/8-16X1.75-IN)
7.	061-8639	[1]	SEAL-O-RING
8.	0S-1616	[2]	BOLT (1/4-20X1-IN)
9.	3S-0127	[8]	BOLT-12 POINT HEAD (3/8-16X2.25-IN)
10.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	6V-5048	[2]	SEAL-O-RING
12.	9S-8002	[1]	PLUG (7/16-20-THD)
13.	4C-9612 B		SEALANT-SILICONE
	B		USE AS REQUIRED

350-8861: HOUSING GP-REAR

HOUSING GP-REAR

350-8861 HOUSING GP-REAR
S/N EHX5941-UP

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	161-7293	[1]	GASKET-CYLINDER
2.	316-9154	[1]	HOSE AS
3.	232-3643	[1]	HOUSING AS-REAR
	4N-0683	[2]	DOWEL
4.	234-4279	[1]	FLANGE
5.	030-7946	[1]	ELBOW
6.	053-2294	[2]	BOLT-12 POINT HEAD (3/8-16X1.75-IN)
7.	061-8639	[1]	SEAL-O-RING
8.	0S-1616	[2]	BOLT (1/4-20X1-IN)
9.	3S-0127	[8]	BOLT-12 POINT HEAD (3/8-16X2.25-IN)
10.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	6V-5048	[3]	SEAL-O-RING
12.	9S-8002	[1]	PLUG (7/16-20-THD)
13.	4C-9612 B		SEALANT-SILICONE
	B		USE AS REQUIRED

455-1867: KIT-ENGINE CONVERSION

KIT-ENGINE CONVERSION

455-1867 KIT-ENGINE CONVERSION -REPOWER
S/N 3KR1-UP
PROVIDES A BREAKDOWN OF THE SERVICEABLE PARTS REQUIRED FOR THE REPOWER. EXCLUDING THE ENGINE AND OPTIONAL GROUPS
PART OF 328-1710 CONVERSION AR-MACHINE

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-3490 M	[44]	NUT-WELD (M10X1.5-THD)
8T-3597 M	[4]	NUT-WELD (M12X1.75-THD)
8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
8T-4137 M	[12]	BOLT (M10X1.5X20-MM)
272-9665	[1]	COVER AS-ACCESS
371-4122 Y	[1]	HOOD AS

		(ABOVE PARTS ARE PART OF THE 317-7691 MOUNTING BRACKET GP)

5P-1076	[16]	WASHER-HARD (13.5X30X4-MM THK)
7T-8331	[8]	MOUNT AS
7X-0590	[8]	WASHER-HARD (13.5X44.5X6-MM THK)
8T-4184 M	[4]	BOLT (M12X1.75X45-MM)
8T-4194 M	[4]	BOLT (M12X1.75X50-MM)
8T-4910 M	[12]	BOLT (M12X1.75X60-MM)
8T-4956 M	[4]	BOLT (M12X1.75X35-MM)
267-2881	[1]	BRACKET AS
267-2882	[1]	BRACKET AS
8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
267-2883	[1]	BRACKET AS
8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
267-2884	[1]	BRACKET AS
8T-3597 M	[8]	NUT-WELD (M12X1.75-THD)
267-2885	[1]	BRACKET
267-2886	[1]	BRACKET
267-9441	[1]	CORE AS-AFTERCOOLER
267-9442	[1]	CORE AS-AFTERCOOLER

		(ABOVE PARTS ARE PART OF THE 267-2880 AIR AFTERCOOLER GP)

2W-9978	[1]	CORE AS-OIL COOLER
259-8303	[2]	GASKET

		(ABOVE PARTS ARE PART OF THE 214-6665 HYDRAULIC OIL COOLER GP)

6I-9471	[1]	RETAINER
7X-2554 M	[1]	BOLT (M16X2X70-MM)
8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
8T-4140 M	[8]	BOLT (M16X2X60-MM)
8T-4186 M	[8]	BOLT (M10X1.5X40-MM)
156-5782	[8]	SPACER (17.5X30X10-MM THK)
213-8359	[1]	ADAPTER-FAN
248-6259	[1]	SUPPORT
251-1253	[1]	SPIDER AS-FAN
365-8627	[1]	BLOCK

		(ABOVE PARTS ARE PART OF THE 213-8358 SUCTION FAN GP)

1P-4278	[20]	CLAMP-HOSE
4L-6459	[1]	BOLT (3/8-16X2.5-IN)
6I-2431	[12]	SEAL
6I-2435	[12]	SPACER (80X108X25-MM THK)
6I-2436	[12]	RETAINER
7X-7729	[30]	WASHER (11X25X3-MM THK)
8T-2502	[4]	BOLT (3/8-16X1.125-IN)
8T-4121	[90]	WASHER-HARD (11X21X2.5-MM THK)
8T-4136 M	[32]	BOLT (M10X1.5X25-MM)
8T-4182 M	[4]	BOLT (M10X1.5X45-MM)
8T-4195 M	[50]	BOLT (M10X1.5X30-MM)
8T-4196 M	[44]	BOLT (M10X1.5X35-MM)
8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
106-4572	[9]	HOSE-RADIATOR
109-3622	[2]	CORE AS-RADIATOR (LONG)
111-7421	[2]	CAP
198-4777	[12]	WASHER-HARD (11X25X10-MM THK)
209-4588	[4]	CLAMP
213-6739	[1]	TANK AS-RADIATOR
7T-1099	[8]	LINK
8T-3490 M	[18]	NUT-WELD (M10X1.5-THD)
9R-2613 M	[3]	BOSS-WELD (M10X1.5X25-MM)
213-9906	[10]	CORE AS-RADIATOR
219-4284	[1]	ELBOW
219-4474	[1]	GASKET
221-4038	[4]	PLATE
223-2643	[1]	BAFFLE AS
6B-4594	[13]	RIVET
244-5578	[2]	GUSSET AS
		(EACH INCLUDES)
7T-1099	[2]	LINK
244-5579	[2]	GUSSET AS
		(EACH INCLUDES)
7T-1099	[2]	LINK
267-2862	[1]	PLATE AS
267-2863	[1]	PLATE
267-2864	[1]	PLATE
267-2865	[10]	PLATE AS
267-2867	[1]	BAFFLE AS
6B-4594	[11]	RIVET
267-2868	[1]	BAFFLE AS
6B-4594	[11]	RIVET
322-7302	[1]	TUBE AS

		(ABOVE PARTS ARE PART OF THE 321-6558 RADIATOR GP)

1P-4278	[15]	CLAMP-HOSE
1S-0994	[1]	CLIP (LOOP)
1W-2860	[1]	BRACKET
2V-4868	[1]	FITTING (1/8-27 PTF)
3E-4041	[1]	ELBOW
3J-7354	[4]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
4D-9517	[3]	CLIP
4H-3539	[1]	GROMMET
5P-1465 E		HOSE (254-CM)
5P-5528	[1]	BUSHING-REDUCER
5P-7462	[1]	CLIP (SLOT)
5P-7463	[1]	CLIP (TAB)
6K-5535	[1]	CLIP (SLOT)
6K-5536	[1]	CLIP (TAB)
6V-0683	[1]	GROMMET
6V-5063	[1]	SEAL-O-RING
6V-8245	[3]	ELBOW
6V-8398	[2]	SEAL-O-RING
6V-8639	[1]	CONNECTOR
7M-8485	[1]	SEAL-O-RING
8C-3681 E		HOSE (180-CM)
8T-1117	[4]	CLAMP-HOSE
8T-1889	[2]	CLIP (SLOT)
8T-1890	[2]	CLIP (TAB)
8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
8T-4136 M	[7]	BOLT (M10X1.5X25-MM)
8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
8T-4196 M	[6]	BOLT (M10X1.5X35-MM)
8T-7934	[6]	WASHER-HARD (11X21X5-MM THK)
9M-4136	[1]	SPACER (0.438X0.75X0.5-IN THK)
9Y-9236	[1]	GAUGE-SIGHT
031-1119	[1]	CAP AS-RADIATOR
033-8248	[1]	CLIP (LOOP)
124-2117	[2]	COUPLING
147-0385	[1]	CLIP
192-5425	[2]	TEE
203-6066	[1]	LATCH AS
246-5771	[1]	DOOR AS
1V-8284	[1]	HINGE
267-2876	[1]	BRACKET AS
267-2898	[1]	BRACKET AS
267-2904	[1]	TANK AS-COOLANT
5I-3272 M	[2]	BOSS (M12X1.75X20-MM)
8N-8846	[1]	NECK-FILLER
344-5675 M	[1]	NUT (M10X1.5-THD)
361-2146	[1]	BRACKET AS
361-2147	[1]	BRACKET AS
361-2148	[1]	TUBE

		(ABOVE PARTS ARE PART OF THE 267-2875 COOLANT TANK GP)

0L-1351	[1]	BOLT (3/8-16X0.875-IN)
2W-7622	[1]	PLATE-DRAIN
3B-0551	[1]	PLUG-PIPE
3D-2824	[3]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
3K-0360	[3]	SEAL-O-RING
3S-8665	[5]	CLIP (LOOP)
4L-6454	[2]	BOLT (3/8-16X1-IN)
4L-6459	[2]	BOLT (3/8-16X2.5-IN)
4L-9337	[4]	BOLT (3/8-16X1.5-IN)
5P-8874	[1]	ADAPTER
5S-7383	[7]	BOLT (3/8-16X1.75-IN)
6V-8398	[4]	SEAL-O-RING
6V-8633	[1]	CONNECTOR
6V-8637	[1]	CONNECTOR
6V-8639	[1]	CONNECTOR
6V-8775	[1]	TEE-FACE SEAL
6V-8801	[14]	NUT (3/8-16-THD)
6V-9746	[1]	SEAL-O-RING
7N-1447	[1]	PLUG-DRAIN
7R-0042	[1]	ADAPTER
7S-8780	[1]	HOSE
7X-0290	[1]	BOLT (3/8-16X3.5-IN)
7X-2501	[1]	BOLT (1/4-20X1.25-IN)
8B-6561	[1]	SPACER (5.56X22.22X55.58-MM THK)
8T-1715	[1]	ADAPTER
8T-4896	[28]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9B-7237	[9]	BOLT (3/8-16X1.25-IN)
9M-3116	[1]	GASKET
9V-3418	[1]	ANGLE AS
124-2117	[2]	COUPLING
124-2147	[2]	COUPLING
170-0610	[1]	STUD (3/8-16-THD)
209-4590	[4]	CLAMP-T BOLT
213-6795	[1]	BONNET-INLET
213-6796	[1]	BONNET-OUTLET
219-4474	[2]	GASKET
222-1433	[1]	BRACKET AS
1F-0750	[1]	NUT-WELD (3/8-16-THD)
230-0079	[1]	ELBOW
230-2521	[1]	BRACKET
249-3832	[1]	ADAPTER

		(ABOVE PARTS ARE PART OF THE 212-7682 WATER LINES GP)

1J-9671	[2]	SEAL-O-RING
3J-1907	[2]	SEAL-O-RING
6T-3644	[1]	CIRCUIT BREAKER AS (20-AMPERE)
6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
9B-7233	[2]	LOCKWASHER
6V-6560	[1]	SEAL-O-RING
6V-8076	[1]	ELBOW
8T-7861	[1]	CONNECTOR-O-RING
106-8491 Y	[1]	HARNESS AS-ENGINE
145-7028 Y	[1]	SENSOR GP-TEMPERATURE
164-3652	[1]	ADAPTER
205-3079	[1]	ADAPTER
237-0957 Y	[1]	SENSOR GP-PRESSURE

		(ABOVE PARTS ARE PART OF THE 330-5884 ELECTRICAL CONVERSION GP)

8S-2332	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
9Y-6089	[1]	GASKET
105-4728	[1]	WIRE AS
338-3454 Y	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)

		(ABOVE PARTS ARE PART OF THE 105-4729 ELECTRIC STARTING MOTOR GP)

0S-1604	[8]	BOLT (1/2-20X2.5-IN)
2H-6184	[1]	SEAL-O-RING
4L-6459	[3]	BOLT (3/8-16X2.5-IN)
5J-4715	[3]	WASHER (10.3X20.6X4.2-MM THK)
5P-7213	[8]	WASHER-HARD (13.5X20.5X2-MM THK)
8T-6466 M	[3]	BOLT (M10X1.5X60-MM)
117-0546 Y	[1]	UNIVERSAL JOINT GP

		(ABOVE PARTS ARE PART OF THE 330-5885 POWER TRAIN CONVERSION GP)

9X-7674	[2]	SEAL-RECTANGULAR
322-7297	[1]	TUBE

		(ABOVE PARTS ARE PART OF THE 324-2653 POWER TRAIN OIL LINES GP)

1P-3709	[1]	SEAL-RECTANGULAR
1P-4578	[2]	FLANGE-HALF
1P-4582	[6]	FLANGE-HALF
4J-0522	[2]	SEAL-O-RING
5P-2566	[2]	BOLT (1/2-13X1.5-IN)
6F-8146	[1]	SEAL-O-RING
6V-5134	[1]	SEAL-O-RING
7C-8246	[1]	SPACER (10.5X20X24-MM THK)
7D-4069	[2]	CLAMP
7X-0290	[3]	BOLT (3/8-16X3.5-IN)
7X-0308	[4]	BOLT (7/16-14X1.375-IN)
7X-0326	[2]	BOLT (1/2-13X3-IN)
7X-0507	[4]	WASHER-HARD (12X22.5X5-MM THK)
8C-5230	[1]	SEAL-O-RING
8M-4390	[2]	SEAL-O-RING
8M-4443	[1]	SEAL-O-RING
8M-8157	[1]	SEAL-O-RING
8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
8T-4223	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8T-5360	[8]	WASHER (12X22.5X2.5-MM THK)
8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
8T-8919	[12]	BOLT (1/2-13X1.75-IN)
8T-9391	[4]	BOLT (1/2-13X3.75-IN)
109-0076	[2]	SEAL-O-RING
216-2600	[1]	TUBE AS
216-2603	[1]	TUBE AS
217-5393 Y	[1]	VALVE GP-RELIEF
221-1832	[1]	TUBE AS
221-1833	[1]	TUBE AS
229-5682	[1]	MANIFOLD
229-5683	[1]	MANIFOLD
299-3435	[4]	BOLT (7/16-14X1.5-IN)
344-5675 M	[1]	NUT (M10X1.5-THD)

		(ABOVE PARTS ARE PART OF THE 324-7780 POWER TRAIN OIL LINES GP)

8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
8T-4182 M	[6]	BOLT (M10X1.5X45-MM)
8T-4185 M	[6]	BOLT (M10X1.5X50-MM)
209-3421 Y	[1]	SLIP JOINT GP
211-9087	[2]	COUPLING AS
		(EACH INCLUDES)
6Y-2130	[3]	BUSHING AS
211-9085	[3]	BUSHING AS

		(ABOVE PARTS ARE PART OF THE 209-3420 PUMP COUPLING GP)

0V-0375	[1]	BOLT (1/2-13X3.25-IN)
1F-7958	[2]	NUT-FULL (1/2-13-THD)
2A-1531	[3]	BOLT (1/2-13X6.5-IN)
2D-8009	[1]	SEAL-O-RING
2M-0849	[8]	WASHER-HARD (13.5X25.5X5-MM THK)
6M-9613	[1]	BOLT (1/2-13X9-IN)
7X-0325	[1]	BOLT (1/2-13X2.5-IN)
8C-3077	[1]	SEAL
8M-4992	[1]	SEAL-O-RING
121-0145	[2]	SEAL-O-RING
129-1609	[1]	SEAL-O-RING
191-3026	[1]	STUD
312-6143	[1]	STUD
322-7300	[1]	COVER AS-OIL PUMP
8M-8489	[2]	DOWEL
9M-4370	[2]	BEARING

		(ABOVE PARTS ARE PART OF THE 324-2802 PUMP COVER GP)

1A-2029	[2]	BOLT (3/8-16X1.125-IN)
3B-1915	[4]	BOLT (3/8-16X1.375-IN)
3D-8241	[1]	SEAL-O-RING
5M-2894	[9]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5P-2566	[11]	BOLT (1/2-13X1.5-IN)
7B-1598	[1]	CLIP
7V-6571	[1]	GROMMET
8T-1889	[1]	CLIP (SLOT)
8T-1890	[1]	CLIP (TAB)
8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
8T-4182 M	[3]	BOLT (M10X1.5X45-MM)
8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-8919	[1]	BOLT (1/2-13X1.75-IN)
9S-8752	[1]	NUT-FULL (3/8-16-THD)
133-0661	[1]	BOSS
165-4854	[2]	SEAL-O-RING
324-9718	[1]	BRACKET AS
356-3099	[1]	BRACKET AS
381-9503	[1]	SPACER (10.5X25X20-MM THK)

		(ABOVE PARTS ARE PART OF THE 317-7696 ENGINE INSTALLATION GP)

1P-4278	[1]	CLAMP-HOSE
0S-1595	[4]	BOLT (1/2-13X1.25-IN)
1A-5183	[3]	BOLT (3/8-16X4.75-IN)
5M-3062	[1]	BOLT (3/8-16X0.75-IN)
5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
5T-6374	[1]	SPACER (11X20X40-MM THK)
6V-9012	[1]	CONNECTOR
8T-1897	[2]	CLIP (SLOT)
8T-1898	[2]	CLIP (TAB)
8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8T-9101	[1]	BOLT (3/8-16X2.75-IN)
9X-3826	[3]	COUPLING
053-2141	[1]	COUPLING
246-8809	[1]	PLATE AS
307-2928	[1]	BRACKET AS
353-7952	[2]	GROMMET
1S-1015	[1]	CLIP
1W-8793	[1]	SPACER (13.8X30X20-MM THK)
2M-9780	[5]	SEAL-O-RING
3D-2824	[3]	SEAL-O-RING
3K-0360	[4]	SEAL-O-RING
4D-7735	[1]	CLIP
5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
5P-1076	[1]	WASHER-HARD (13.5X30X4-MM THK)
5P-5991 D		HOSE (2-M)
5S-7382	[1]	BOLT (3/8-16X1.375-IN)
6D-4636	[1]	CLIP (LOOP)
6V-3821 M	[2]	BOLT (M8X1.25X110-MM)
6V-8358	[1]	VALVE-BALL (MANUAL SHUTOFF)
6V-8398	[3]	SEAL-O-RING
6V-8625	[1]	ELBOW
6V-8626	[1]	ELBOW
6V-8801	[1]	NUT (3/8-16-THD)
6V-9830	[1]	CAP (ORFS)
7J-9108	[3]	SEAL-O-RING
7S-1912	[6]	CLIP
7X-7729	[6]	WASHER (11X25X3-MM THK)
8C-7514	[1]	TEE
8J-8197	[1]	CLIP
8T-0077	[1]	CONNECTOR
8T-0100 M	[1]	BOLT (M8X1.25X60-MM)
8T-0404	[1]	ELBOW
8T-1576	[1]	CONNECTOR
8T-3491	[1]	ELBOW
8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
8T-4184 M	[1]	BOLT (M12X1.75X45-MM)
8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-6639	[1]	VALVE-BALL
8T-9383	[1]	BOLT (1/2-13X0.75-IN)
8T-9655	[6]	MOUNT-ISOLATION
8X-7517	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
9G-8140	[1]	SPACER (10.5X25X15-MM THK)
9N-0869	[6]	WASHER-HARD (8.8X25.5X2-MM THK)
9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
9S-8006	[1]	PLUG (7/8-14-THD)
9X-3882	[1]	COUPLING (STRAIGHT)
9X-3883	[2]	COUPLING (STRAIGHT)
9X-3894	[1]	COUPLING (90-DEG)
9X-3895	[2]	COUPLING
034-3679	[1]	ADAPTER
103-0010	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
124-3019	[1]	BRACKET AS
133-7810 M	[1]	STUD-TAPERLOCK (M10X1.5X45-MM)
165-5970 Y	[1]	SWITCH GP-TOGGLE
173-1583	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
191-1782	[1]	SPACER (8.5X12.7X38.2-MM THK)
191-1783	[2]	SPACER (8.5X12.7X87.3-MM THK)
217-8342 Y	[1]	PUMP GP-FUEL PRM & WATER SEP
226-3492	[1]	BRACKET AS
230-7515	[1]	PLATE
246-2641	[1]	PADLOCK GP
344-5675 M	[1]	NUT (M10X1.5-THD)

		(ABOVE PARTS ARE PART OF THE 213-0047 FUEL FILTER & LINES GP)

1H-2415	[1]	BOLT (0.5-13X2.5-IN)
2K-5804	[1]	ROD END
4D-3704	[1]	WASHER-HARD (17X30X5-MM THK)
6V-8181	[2]	NUT-FULL (5/8-18-THD)
6V-8188	[1]	NUT (1/2-13-THD)
6W-8509	[1]	PUSHROD
7X-0339	[1]	BOLT (1/2-13X6.25-IN)
7X-0346	[1]	BOLT (5/8-11X2-IN)
7X-0591	[2]	WASHER-HARD (17X29X3-MM THK)
8S-5383	[1]	BLOCK
8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
9S-1240	[1]	BRACKET AS
9S-1354	[1]	NUT (5/8-18-THD)
9Y-4056	[1]	PULLEY-ALTERNATOR
197-8820 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 95-AMPERE)
219-4263	[1]	GUARD
285-0986	[1]	BRACKET AS
350-1223	[1]	V-BELT

		(ABOVE PARTS ARE PART OF THE 218-4962 CHARGING ALTERNATOR GP)

5P-1075	[20]	WASHER-HARD (10.2X22.5X3-MM THK)
6V-8801	[20]	NUT (3/8-16-THD)
213-6864	[1]	SHIELD AS-HEAT
213-6865	[1]	SHIELD AS-HEAT
213-6866	[1]	SHIELD AS-HEAT
226-3939	[15]	KIT-SPRING
239-1464	[1]	SHIELD AS-HEAT
226-3939	[4]	KIT-SPRING
260-9421	[1]	BRACKET
260-9423	[1]	BRACKET
260-9424	[2]	BRACKET
265-9370	[1]	SHIELD AS-TURBOCHARGER

		(ABOVE PARTS ARE PART OF THE 212-7688 PILOT CARTRIDGE VALVE GP)

1S-0396	[2]	CLIP
6V-2381	[2]	CLIP (SLOT)
6V-2382	[2]	CLIP (TAB)
8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
124-6264	[4]	CLAMP-HOSE
313-1276	[1]	TUBE (RH)
315-9994	[1]	TUBE (LH)
381-9658	[2]	BRACKET AS

		(ABOVE PARTS ARE PART OF THE 291-4724 FUMES DISPOSAL GP)

0S-0509	[2]	BOLT (3/8-16X0.75-IN)
0S-1588	[1]	BOLT (3/8-16X1.25-IN)
4B-0418	[1]	CLIP
5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9S-8752	[1]	NUT-FULL (3/8-16-THD)
9X-2503	[1]	CLIP
9X-6458	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
112-3102	[1]	SEAL-O-RING
165-6170	[3]	PLUG
206-7044	[1]	GAUGE AS-OIL LEVEL (DIPSTICK)
219-6033	[1]	TUBE AS-OIL GAUGE

		(ABOVE PARTS ARE PART OF THE 216-0821 OIL LEVEL (DIPSTICK) GAUGE GP)

2A-1538	[12]	BOLT (3/4-10X2.25-IN)
3B-2968	[4]	BOLT (3/4-10X3.5-IN)
4P-5546	[2]	SUPPORT
5P-8248	[16]	WASHER-HARD (20X36.5X3.5-MM THK)
5P-8249	[8]	WASHER-HARD (24X41.5X4-MM THK)
6C-3210	[4]	BOLT (7/8-9X3-IN)
6N-3896	[2]	CAP
6N-3897	[2]	SUPPORT-ENGINE
6Y-2090	[2]	MOUNT AS
7X-0455	[4]	BOLT (7/8-9X4.25-IN)

		(ABOVE PARTS ARE PART OF THE 4P-5544 ENGINE SUPPORT GP)

6V-4432	[4]	BOLT (1/2-13X4-IN)
213-6922	[1]	PULLEY

		(ABOVE PARTS ARE PART OF THE 212-9648 CRANKSHAFT PULLEY GP)

1P-4577	[8]	FLANGE-HALF
1P-4578	[4]	FLANGE-HALF
1P-4582	[4]	FLANGE-HALF
3B-1915	[4]	BOLT (3/8-16X1.375-IN)
3G-2689	[1]	TUBE AS-BAFFLE
4J-0520	[5]	SEAL-O-RING
4J-0522	[2]	SEAL-O-RING
4J-0527	[2]	SEAL-O-RING
5F-3106	[2]	SEAL-O-RING
5K-9090	[2]	SEAL-O-RING
5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5P-2566	[4]	BOLT (1/2-13X1.5-IN)
5P-7464	[3]	CLIP (SLOT)
5P-7465	[3]	CLIP (TAB)
5P-7701	[2]	SEAL-O-RING
5P-7815	[1]	SEAL-O-RING
5S-7382	[16]	BOLT (3/8-16X1.375-IN)
6D-1004	[1]	GASKET
6V-5050	[2]	SEAL-O-RING
6V-7359	[3]	GROMMET (25-MM ID, 37-MM OD)
6V-8400	[3]	SEAL-O-RING
6V-8985	[1]	ELBOW
6V-9007	[1]	ELBOW
6V-9746	[6]	SEAL-O-RING
6V-9846	[1]	TEE
6V-9973	[1]	COUPLING AS-PERMANENT
6V-9975	[1]	COUPLING AS-PERMANENT
7J-9108	[1]	SEAL-O-RING
7X-0345	[2]	BOLT (5/8-11X1.75-IN)
7X-0346	[2]	BOLT (5/8-11X2-IN)
8J-9208	[1]	BOSS
8T-0120	[1]	ELBOW
8T-3611	[1]	CONNECTOR
8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
8T-4182 M	[3]	BOLT (M10X1.5X45-MM)
8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4896	[16]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8T-7971	[4]	WASHER-HARD (13.5X25.5X5-MM THK)
9X-7667	[1]	COUPLING AS
124-2055	[2]	COUPLING-PERMANENT
124-2059	[1]	COUPLING-PERMANENT
124-2087	[1]	COUPLING-PERMANENT
124-2103	[1]	COUPLING-PERMANENT
124-2107	[1]	COUPLING-PERMANENT
124-2108	[1]	COUPLING-PERMANENT
124-2124	[2]	COUPLING-PERMANENT
124-2148	[1]	COUPLING-PERMANENT
124-2149	[2]	COUPLING-PERMANENT
124-2156	[1]	COUPLING-PERMANENT
124-4288	[2]	FLANGE-SPLIT
124-4499	[1]	ELBOW
147-1716	[3]	COUPLING-PERMANENT
162-3122	[1]	ELBOW
166-4647 Y	[1]	FILTER GP-OIL
168-6355	[1]	BRACKET
202-5371	[1]	SEAL
203-5618	[1]	COVER
212-0272 Y	[1]	MOTOR GP-PISTON
234-1977	[1]	MANIFOLD
304-1122 Y	[1]	PUMP GP-PISTON
322-7308	[1]	TUBE AS
322-7309	[1]	BLOCK
324-9718	[1]	BRACKET AS
366-4664	[1]	CONNECTOR
399-2754	[1]	TUBE AS

		(ABOVE PARTS ARE PART OF THE 318-2141 HYDRAULIC SYSTEM CONVERSION GP)

2S-8439	[1]	SEAL-O-RING
3J-1907	[2]	SEAL-O-RING
3S-8652	[1]	SPRING
6T-9222	[1]	SPOOL
7B-3028	[1]	SCREW-DRIVE (NO 4X 3/16-IN)
8M-6393	[1]	RING-RETAINING
9S-4191	[2]	PLUG (9/16-18-THD)
132-8875	[1]	FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)
133-1278	[1]	HOUSING AS-OIL FILTER
133-1288	[1]	RETAINER
133-2199	[1]	SPRING
139-7590	[1]	BASE-XMSN OIL FILTER

		(ABOVE PARTS ARE PART OF THE 133-1281 OIL FILTER GP)

4L-6454	[4]	BOLT (3/8-16X1-IN)
5L-8854	[4]	RING-SEALING
5P-1075	[12]	WASHER-HARD (10.2X22.5X3-MM THK)
9B-7237	[8]	BOLT (3/8-16X1.25-IN)
9N-1941	[2]	CLAMP-V BAND
175-2582	[4]	RING-METAL SEAL
175-2583	[2]	SEAL-EXHAUST
175-2592	[2]	COUPLING AS
		(EACH INCLUDES)
175-2589	[1]	RING-EXHAUST SEAL
214-9367	[2]	CLAMP-BAND
229-2689	[1]	BRACKET AS
229-2690	[1]	BRACKET AS
9R-2613 M	[1]	BOSS-WELD (M10X1.5X25-MM)
230-5440	[2]	COUPLING AS
255-3544	[2]	TUBE AS
255-3545	[1]	ELBOW AS
1F-0750	[2]	NUT-WELD (3/8-16-THD)
255-3546	[1]	ELBOW AS
1F-0750	[2]	NUT-WELD (3/8-16-THD)

		(ABOVE PARTS ARE PART OF THE 212-9645 AIR LINES GP)

1P-9390	[2]	GASKET-OUTLET
5M-3062	[8]	BOLT (3/8-16X0.75-IN)
5P-1075	[8]	WASHER-HARD (10.2X22.5X3-MM THK)
5P-4869	[4]	CLAMP-HOSE
6V-4248 M	[10]	BOLT (M10X1.5X25-MM)
6V-5839	[10]	WASHER (11X21X2.5-MM THK)
6V-7744 M	[20]	LOCKNUT (M10X1.5-THD)
7S-8817	[2]	PRECLEANER AS
		(EACH INCLUDES)
0S-1591	[1]	BOLT (3/8-16X1.5-IN)
6V-8801	[1]	NUT (3/8-16-THD)
8T-4121	[20]	WASHER-HARD (11X21X2.5-MM THK)
123-6857	[1]	BODY AS-PRECLEANER (LH)
123-6858	[1]	BODY AS-PRECLEANER (RH)
231-8825	[2]	CLAMP AS
		(EACH INCLUDES)
8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
231-8842	[2]	PLATE
235-4177 Y	[2]	AIR CLEANER GP
268-6682	[2]	ELBOW
418-6781 M	[20]	STUD-TAPERLOCK (M10X1.5X40-MM)

		(ABOVE PARTS ARE PART OF THE 268-6368 AIR CLEANER GP)

5P-0597	[4]	CLAMP-HOSE
5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
5P-1471 E		HOSE (196-CM)
5P-4325	[4]	CLIP (LOOP)
7S-5003	[2]	CAP AS-RAIN (EXHAUST)
8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
269-0892	[2]	EJECTOR AS

		(ABOVE PARTS ARE PART OF THE 269-0889 DUST EJECTOR GP)

5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
6V-1195	[2]	SEAL-O-RING
7X-7729	[2]	WASHER (11X25X3-MM THK)
8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
8T-4185 M	[8]	BOLT (M10X1.5X50-MM)
8T-4186 M	[8]	BOLT (M10X1.5X40-MM)
8T-4988	[2]	CLAMP-HOSE
8T-7008	[4]	BOLT (3/8-16X3-IN)
8T-7934	[16]	WASHER-HARD (11X21X5-MM THK)
9N-9545	[2]	ELBOW
213-6907	[1]	SUPPORT-COVER
239-5609	[2]	CLAMP
267-2906	[1]	TUBE AS
267-2907	[1]	TUBE AS
294-4708	[2]	BRACKET AS
		(EACH INCLUDES)
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)

		(ABOVE PARTS ARE PART OF THE 267-2905 AIR LINES GP)

5P-1076	[2]	WASHER-HARD (13.5X30X4-MM THK)
5R-5927	[4]	WASHER (14X65X6-MM THK)
6V-3668 M	[6]	BOLT (M12X1.75X30-MM)
269-7114	[1]	MUFFLER AS (LH)
269-7115	[1]	MUFFLER AS (RH)

		(ABOVE PARTS ARE PART OF THE 269-7113 MUFFLER GP)

6V-5048	[1]	SEAL-O-RING
6V-6782	[4]	CLIP (SLOT)
6V-6783	[4]	CLIP (TAB)
7C-3910	[2]	HOSE
7E-8630	[2]	HOSE-AIR INLET
8C-3089	[2]	SEAL-O-RING
8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8T-4186 M	[4]	BOLT (M10X1.5X40-MM)
9S-8002	[1]	PLUG (7/16-20-THD)
9X-2201	[32]	CLAMP-HOSE
127-0929	[2]	CLAMP-V BAND
129-6400	[1]	ADAPTER
186-2002	[2]	HOSE
217-8947	[1]	ELBOW
267-2896	[1]	BRACKET AS
7Y-8763 M	[1]	BOSS (M10X1.5X25-MM)
267-2897	[1]	BRACKET AS
7Y-8763 M	[1]	BOSS (M10X1.5X25-MM)
269-1882	[2]	ELBOW
322-7303	[1]	TUBE
322-7304	[1]	TUBE
322-7305	[1]	TUBE
322-7306	[1]	TUBE

		(ABOVE PARTS ARE PART OF THE 323-9943 AIR LINES GP)
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

235-2014: LIFTING GP-ENGINE

LIFTING GP-ENGINE

235-2014 LIFTING GP-ENGINE
S/N EHX1-UP

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-1550	[1]	EYE AS-LIFTING
2.	235-1861	[1]	EYE-LIFTING
3.	5P-8245	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	7B-3235	[7]	BOLT (1/2-13X1.375-IN)
5.	7D-1649	[6]	WASHER-HARD (13.5X32X5-MM THK)
6.	9X-8875	[4]	BOLT (1/2-13X3.5-IN)

260-9631: MECHANISM GP-FUEL PUMP & VALVE

MECHANISM GP-FUEL PUMP & VALVE

260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX1-6102

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-1458	[24]	BRIDGE-VALVE
2.	320-2793 CY	[6]	ROCKER ARM GP
3.	356-5212	[24]	BOLT-12 POINT HEAD (1/2-13X3.5 IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

260-9631: MECHANISM GP-FUEL PUMP & VALVE

MECHANISM GP-FUEL PUMP & VALVE

260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX6013-UP
Type 1

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	348-7743	[24]	BRIDGE-VALVE
2.	342-6643 CY	[6]	ROCKER ARM GP
3.	356-5212	[24]	BOLT-12 POINT HEAD (1/2-13X3.5 IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

260-9631: MECHANISM GP-FUEL PUMP & VALVE

MECHANISM GP-FUEL PUMP & VALVE

260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX6013-UP
Type 2

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	348-7743	[24]	BRIDGE-VALVE
2.	392-0066 Y	[6]	ROCKER ARM GP
3.	356-5212	[24]	BOLT-12 POINT HEAD (1/2-13X3.5 IN)
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

FLYWHEEL GP

Service Letter-NACD

Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors
Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-Australia

Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors
Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-CFEL

Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors
Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-CSARL

Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors
Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-Americas

Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors
Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-Truck/Ag/Marine

Specifications

Flywheel
3408E and 3412E Engines for Caterpillar Built Machines

Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines

Service Letter-China

Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors
Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-Asia

Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors
Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Reuse And Salvage Guidelines

Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}

Service Letter-APD

Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors
Product Support Program For Replacing The Flywheel Housing Gaskets On Certain 836 Compactors; D9R and D10R Track-Type Tractors

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Testing and Adjusting

Flywheel - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Disassembly and Assembly

Flywheel - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Flywheel - Install
3408E and 3412E Engines for Caterpillar Built Machines

Flywheel - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Housing (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25

Longer Cap Screws With Spacers Used In Flywheel Housing Groups {1157}
1998/06/22

New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02

Wider Crankshaft Gear Used {1204}
1999/09/13

New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/10/25

A New Flywheel Improves Service Life {1156, 1158}
2002/09/30

Caterpillar Parts SIS Catalog D10R :

Truck sale:

150,000 USD

Caterpillar D10R, Construction
- Dozers
PETERSON TRACTOR CO

Caterpillar D10R, Construction
- Dozers
GREGORY POOLE EQUIPMENT CO.

160,000

Caterpillar D10R, Construction
- Dozers
QUINN COMPANY

155,000

Caterpillar D10R, Construction
- Dozers
CASHMAN EQUIPMENT CO.

CATERPILLAR D10R 1997
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States