225-6052 CRANKSHAFT GP S/N EHX1-UP D10N TRACK-TYPE TRACTOR

BASIC ENGINE

CRANKSHAFT GP

0. 225-6052 CRANKSHAFT

CYLINDER BLOCK GP

1. 230-7181 CYLINDER B
2. 230-7182 CYLINDER B
3. 348-9904 CYLINDER B
4. 348-9905 CYLINDER B
5. 237-0842 CYLINDER B
6. 349-2528 CYLINDER B

CYLINDER HEAD GP

7. 357-7398 CYLINDER H
8. 396-8374 CYLINDER H
9. 284-8895 CYLINDER H
0. INFORMATION

TRACK-TYPE TRACTOR D10N TRACK-TYPE TRACTOR 2YD
C27 Engine Emissions Retrofit Repower Tier III For D10N Tractor 2YD00001-UP (MACHINE) SEBP5302 D10N 2YD (1987)

BASIC ENGINE

CRANKSHAFT GP

225-6052 CRANKSHAFT GP

212-9648 PULLEY GP-CRANKSHAFT

319-0785 SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT

#SEBP53020020

225-6052: CRANKSHAFT GP

CRANKSHAFT GP

225-6052 CRANKSHAFT GP
S/N EHX1-UP

i02041101 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	253-1752 J	[2]	PLATE-THRUST
2.	319-7401 Y	[1]	SEAL GP-CRANKSHAFT (FRONT)
3.	317-8766 J	[7]	BEARING-MAIN (STANDARD)
	4W-5698 AB		BEARING-MAIN (0.63-MM US)
	4W-5699 AB		BEARING-MAIN (1.27-MM US)
	4W-5700 AB		BEARING-MAIN (0.63-MM OS)
	4W-5701 AB		BEARING-MAIN (0.63-MM OS, 0.63-MM US)
4.	384-9907	[1]	CRANKSHAFT AS
4A.	4N-0684	[1]	DOWEL
4B.	7S-5005	[1]	DOWEL
4C.	223-9135	[1]	GEAR-CRANKSHAFT (99-TEETH)

			AVAILABLE REPAIR KIT(S):
	243-6718 AJ		KIT-CRANKSHAFT BEARING (STANDARD)
			(KIT INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP53020021

230-7181: CYLINDER BLOCK AS

CYLINDER BLOCK AS

230-7181 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 230-7182 CYLINDER BLOCK AS

i02043816 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
2.	225-5965	[4]	SLEEVE
3.	225-5966	[1]	SLEEVE
4.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
5.	232-7607	[7]	CAP-CRANKSHAFT
6.	234-6902	[14]	BOLT-12 POINT HEAD (M11X1.25X50-MM)
7.	7W-6492	[2]	PLUG-PIPE (1/2-14-THD)
8.	4N-0685	[1]	BUSHING (1-IN WIDE)
9.	4N-6658	[1]	BUSHING (1.3-IN WIDE)

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB

#SEBP53020022

230-7182: CYLINDER BLOCK AS

CYLINDER BLOCK AS

230-7182 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 237-0842 CYLINDER BLOCK GP

i02043813 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-7181 Y	[1]	CYLINDER BLOCK AS
2.	197-9322	[12]	LINER-CYLINDER BLOCK
3.	9L-5854	[12]	BAND-FILLER (130.2-MM ID)
4.	142-7072	[12]	SEAL-LINER
5.	110-2220	[12]	SEAL-LINER
6.	142-6217	[12]	SEAL-O-RING

	6I-4361 ABF		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABF		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABF		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABF		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABF		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABF		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABF		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABF		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABF		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABF		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABF		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABF		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP53020023

348-9904: CYLINDER BLOCK AS

CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS
S/N EHX5681-UP
PART OF 348-9905 CYLINDER BLOCK AS

i03745300 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
2.	225-5966	[1]	SLEEVE
3.	232-7607	[7]	CAP-CRANKSHAFT
4.	365-4307	[14]	BOLT-12 POINT HEAD (M11X1.25X50-MM)
5.	341-0087	[2]	PLUG AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
6.	4N-0685	[1]	BUSHING (1-IN WIDE)
7.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
9.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)

#SEBP53020024

348-9905: CYLINDER BLOCK AS

CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS
S/N EHX5681-UP
PART OF 349-2528 CYLINDER BLOCK GP

i03745213 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-5854	[12]	BAND-FILLER (130.2-MM ID)
2.	110-2220	[12]	SEAL-LINER
3.	142-6217	[12]	SEAL-O-RING
4.	142-7072	[12]	SEAL-LINER
5.	197-9322	[12]	LINER-CYLINDER BLOCK
6.	348-9904 Y	[1]	CYLINDER BLOCK AS

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB
	Y		SEPARATE ILLUSTRATION

#SEBP53020025

237-0842: CYLINDER BLOCK GP

CYLINDER BLOCK GP

237-0842 CYLINDER BLOCK GP
S/N EHX1-UP

i02041115 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-7182 Y	[1]	CYLINDER BLOCK AS
2.	3B-0645	[1]	PLUG-CUP
3.	5P-8356	[4]	SEAL-O-RING
4.	4N-1650	[4]	DOWEL
5.	225-3101	[2]	GASKET-PLATE
6.	225-3100	[2]	PLATE-SPACER
7.	7C-9614	[4]	PLUG-TAPERLOCK (1-5/8-12-THD)
8.	4N-0683	[4]	DOWEL
9.	214-1728	[1]	STUD (3/8-16, 1/8-27X3.5-IN)
10.	6L-4428	[3]	STUD-TAPERLOCK (3/8-16X4.01-IN)
11.	8T-6757	[2]	PLUG-PIPE
12.	6V-5050	[2]	SEAL-O-RING
13.	9S-8008	[2]	PLUG (1-1/16-12-THD)(1 1/16-12 THD)
14.	240-9543	[14]	WASHER (12.45X22.35X1.82-MM THK)

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
	Y		SEPARATE ILLUSTRATION

#SEBP53020026

349-2528: CYLINDER BLOCK GP

CYLINDER BLOCK GP

349-2528 CYLINDER BLOCK GP
S/N EHX5681-UP

i03838671 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	354-8484	[2]	GASKET-PLATE
2.	240-9543	[14]	WASHER (12.45X22.35X1.82-MM THK)
3.	5P-8356	[4]	SEAL-O-RING
4.	4N-1650	[4]	DOWEL
5.	315-9859	[2]	PLUG AS
			(EACH INCLUDES)
	9S-8008	[1]	PLUG (1-1/16-12-THD)
	238-5082	[1]	SEAL-O-RING
6.	225-3100	[2]	PLATE-SPACER
7.	7C-9614	[4]	PLUG-TAPERLOCK (1-5/8-12-THD)
8.	4N-0683	[4]	DOWEL
9.	214-1728	[1]	STUD (3/8-16, 1/8-27X3.5-IN)
10.	6L-4428	[3]	STUD-TAPERLOCK (3/8-16X4.01-IN)
11.	8T-6757	[1]	PLUG-PIPE
12.	Y	[1]	CYLINDER BLOCK AS
13.	307-2671	[1]	PLUG AS
	9S-8002	[1]	PLUG (7/16-20-THD)
	214-7566	[1]	SEAL-O-RING
14.	3B-0645	[1]	PLUG-CUP

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB
	Y		SEPARATE ILLUSTRATION

#SEBP53020027

357-7398: CYLINDER HEAD AS

CYLINDER HEAD AS

357-7398 CYLINDER HEAD AS
S/N EHX1-UP
PART OF 359-0936 CYLINDER HEAD GP

i04006393 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
	390-0914 AB		BUSHING
3.	263-4920	[6]	SLEEVE-INJECTOR (INLET)
4.	224-3983	[12]	INSERT-SEAT (INLET)(STANDARD)
	314-3063 AB		INSERT-VALVE SEAT (0.55-MM THK)(INLET)
	314-3064 AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
	314-3065 AB		INSERT-VALVE SEAT (0.13-MM OS)(INLET)
	314-3066 AB		INSERT-VALVE SEAT (0.26-MM OS, INLET)
	314-3067 AB		INSERT-VALVE SEAT (0.26-MM OS)(INLET)
	314-3068 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
	314-3069 AB		INSERT-VALVE SEAT (0.51-MM OS)(INLET)
5.	166-2904	[12]	SEAL-O-RING
6.	3B-0623	[36]	PLUG-CUP
7.	3B-0645	[2]	PLUG-CUP
8.	8T-6757	[3]	PLUG-PIPE
9.	9X-7430	[6]	SEAL-O-RING
10.	226-5561	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	288-4883 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP53020028

396-8374: CYLINDER HEAD AS

CYLINDER HEAD AS

396-8374 CYLINDER HEAD AS
S/N EHX1-UP
PART OF 396-8375 CYLINDER HEAD GP

i04941680 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
3.	226-5561	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	288-4883 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
4.	263-4920	[6]	SLEEVE-INJECTOR (INLET)
5.	280-3979	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
	288-4881 AB		INSERT-VALVE SEAT (INLET)(0.51-MM OS)
	288-4882 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
6.	9X-7430	[6]	SEAL-O-RING
7.	166-2904	[12]	SEAL-O-RING
8.	3B-0623	[36]	PLUG-CUP
9.	3B-0645	[2]	PLUG-CUP
10.	8T-6757	[3]	PLUG-PIPE
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP53020029

284-8895: CYLINDER HEAD GP

CYLINDER HEAD GP

284-8895 CYLINDER HEAD GP
S/N EHX1-UP

i02481416 SEBP5302

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-6772	[48]	SEAL (WATER)
2.	6I-4025	[32]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1855	[1]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
3.	106-1792	[24]	STUD-TAPERLOCK (3/8-16X4-IN)
4.	106-5673	[20]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1854	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
5.	225-3099	[2]	GASKET-CYLINDER HEAD
6.	248-0036	[26]	BOLT-WASHER HEAD (3/8-16X6-IN)
7.	359-0936 Y	[2]	CYLINDER HEAD GP
8.	183-3407	[10]	PLUG AS
			(EACH INCLUDES)
	9S-8004	[1]	PLUG (9/16-18-THD)
8A.	214-7568	[1]	SEAL-O-RING
9.	353-5126	[4]	PLUG AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	9S-8005	[1]	PLUG (3/4-16-THD)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CRANKSHAFT GP

Engine News

New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}

Special Instruction

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Service Letter-NACD

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-Australia

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-CFEL

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-CSARL

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-Americas

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-Brazil

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Truck/Ag/Marine

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Specifications

Crankshaft
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Crankshaft Rear Gear
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Connecting Rod And Main Bearing Journals
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Connecting Rod and Main Bearing Journals
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft
3408E and 3412E Engines for Caterpillar Built Machines

Tool Operating Manual

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Service Letter-China

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Service Letter-Asia

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Reuse And Salvage Guidelines

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Service Letter-APD

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock

Testing and Adjusting

Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Disassembly and Assembly

Vibration Damper And Crankshaft Pulley
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Crankshaft Front Seal And Wear Sleeve
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Crankshaft Main Bearings
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Crankshaft
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Crankshaft Rear Seal And Wear Sleeve
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Crankshaft Rear Gear
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Install
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft - Install
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Front Seal - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Front Seal - Install
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Install
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Front Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Front Seal - Install
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft - Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01

Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Crankshaft Main Bearings Used{1203}
1982/05/10

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1983/04/04

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10

Crankshaft Failures{1202,1230}
1983/11/21

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

Installation Of Crankshaft Front And Rear Seals (Later Design){1160,1161}
1984/06/04

Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11

New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16

Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17

Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18

Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11

Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07

Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09

Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14

Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21

Wider Crankshaft Gear Used {1204}
1999/09/13

Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20

New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/12

A New Integral Seal Provides Improved Sealing {7555}
2003/10/13

A New Type of Main Bearing is Available {1202, 1203}
2008/09/29

The Process For Remanufacturing the Crankshaft Has Been Updated {1202}
2004/12/13

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Use Reuse and Salvage Guidelines for Measurements of Crankshafts {1202}
2006/10/09

Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10

New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}

Caterpillar Parts SIS Catalog D10N :

445-1221 COVER GP-VALVE MECHANISM

321-2854 COVER GP-VALVE MECHANISM

293-4440 COVER GP-REAR HOUSING

321-2855 COVER GP-CYLINDER BLOCK

235-7135 COVER GP-CYLINDER BLOCK

260-9306 CAMSHAFT GP

443-6220 BASE GP-VALVE COVER & INJ HARN

230-7181 CYLINDER BLOCK AS

230-7182 CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS

237-0842 CYLINDER BLOCK GP

349-2528 CYLINDER BLOCK GP

357-7398 CYLINDER HEAD AS

396-8374 CYLINDER HEAD AS

Truck sale:

Caterpillar D10N
- Crawler dozers
TRACTOR & EQUIPMENT CO.

150.000

Caterpillar D10N, Bulldozer, Bau-Und Bergbauausrüstung
- Crawler dozers
TRACTOR & EQUIPMENT CO.

Caterpillar D10N, Construction
- Crawler dozers

75,000

Caterpillar D10N, Construction
- Dozers
CATERPILLAR FINANCIAL SERVICES CORPORATION

Caterpillar D10N, Construction
- Dozers
WHEELER MACHINERY CO.