AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

151-1356 LINES GP-FUEL FILTER S/N 80M1-UP 773B TRUCK


FUEL SYSTEM
LINES GP-FUEL
PUMP GP-UNIT INJECTOR HYD

TRUCK 773B TRUCK 63W
 3412E Engine Emissions Retrofit Repower Tier I For 772B, 773B, And 775B Machines 63W00001-UP (MACHINE) SEBP5303 773B 63W   (1978)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FUEL
127-7366 LINES GP-FUEL
LINES GP-FUEL FILTER
151-1356 LINES GP-FUEL FILTER
VALVE GP-PRESSURE CONTROL
165-1536 VALVE GP-PRESSURE CONTROL
 

#SEBP53030110
 

151-1356: LINES GP-FUEL FILTER

151-1356 LINES GP-FUEL FILTER
S/N 80M1-UP
i02555273 SEBP5303
1511356 LINES GP-FUEL FILTER Parts scheme 1511356 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 098-5687 [1] TEE  
2. 8L-2786 [3] SEAL-O-RING  
3. 8L-2779 [10] SEAL-O-RING  
4. 102-2240 Y [1] SENSOR GP-TEMPERATURE (3-PIN)(FUEL)  
5. 119-0960 [1] BRACKET  
6. 125-6795 I [1] HOSE AS  
7. 6V-8636 [4] CONNECTOR  
8. 6V-5049 [19] SEAL-O-RING  
9. 6V-8634 [1] CONNECTOR  
10. 125-6796 I [1] HOSE AS  
11. 5P-7854 [2] CLIP  
12. 8M-2773 [4] CLIP (LOOP)  
13. 0S-1594 [8] BOLT (3/8-16X1-IN)  
14. 1R-0749 [2] FILTER-FUEL (ADVANCED EFFICIENCY)  
15. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
16. 125-6797 I [1] HOSE AS  
17. 125-6798 I [1] HOSE AS  
18. 9X-6458 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
20. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 6N-2946 [1] BASE AS-FUEL FILTER  
  6V-5049 [1] SEAL-O-RING  
  9S-4167 [2] STUD-HOLLOW (1-14X1.47-IN)  
  9S-8004 [1] PLUG (9/16-18-THD)  
22. 6N-4414 [1] COVER-FILTER BASE  
23. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
24. 9S-4191 [4] PLUG (9/16-18-THD)  
25. 6V-8724 [3] ELBOW  
26. 8N-9798 [1] PLATE  
27. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
28. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
30. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
31. 9S-4182 [1] PLUG (7/16-20-THD)  
32. 6V-5048 [1] SEAL-O-RING  
33. 157-1377 I [1] HOSE AS  
34. 0S-1585 [1] BOLT (1/2-13X1.5-IN)  
35. 6Y-3407 I [1] HOSE AS  
36. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
37. 282-1915 CY [1] VALVE GP-CHECK (FUEL)  
38. 1B-3057 [1] CLIP  
39. 116-5819 [1] BRACKET  
40. 123-0555 [1] MANIFOLD  
41. 1B-9575 [4] BOLT (5/16-18X1.56-IN)  
42. 8T-6876 [2] ELBOW  
43. 033-6033 [4] SEAL-O-RING  
44. 115-4316 [1] TUBE AS  
45. 6V-9873 [2] CONNECTOR  
46. 115-4321 [1] TUBE AS  
47. 7D-1649 [3] WASHER-HARD (13.5X32X5-MM THK)  
48. 9S-8004 [4] PLUG (9/16-18-THD)  
49. 6N-5587 [1] PLATE  
50. 135-9981 [1] JUNCTION BLOCK  
51. 9S-1366 [1] BOLT (1/2-13X2.5-IN)  
52. 1S-6420 [1] CLIP  
53. 4D-7735 [1] CLIP  
54. 136-3310 I [1] HOSE AS  
55. 4F-3508 [1] BOLT (5/16-18X6.5-IN)  
56. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
57. 8S-0948 [1] CLIP  
58. 2K-5870 [1] SPACER (0.675X0.428X2.06-IN THK)  
59. 3S-2093 [2] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP53030111
 

109-0399: LINES GP-INJECTOR HYD PUMP

109-0399 LINES GP-INJECTOR HYD PUMP
S/N 80M1-UP
i00090230 SEBP5303
1090399 LINES GP-INJECTOR HYD PUMP Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-3202 [1] TUBE AS  
2. 280-7460 [1] TUBE AS  
3. 2S-9503 [1] SPACER (0.406X1X0.875-IN THK)  
4. 0L-1143 [3] BOLT (3/8-16X2.5-IN)  
5. 9L-9132 [1] WASHER (10.2X25.5X2.5-MM THK)  
6. 234-8937 [1] SEAL-INTEGRAL  
7. 6V-9009 [1] ELBOW  
8. 5P-7815 [1] SEAL-O-RING  
9. 9X-7734 [1] SEAL-O-RING  
10. 6V-8626 [1] ELBOW  
11. 152-2939 [2] SEAL-O-RING  
12. 152-2938 [4] SEAL-O-RING  
13. 6V-5134 [1] SEAL-O-RING  
14. 162-2501 I [1] HOSE AS  
15. 6V-9003 [1] ELBOW  
16. 113-1921 [1] ELBOW  
17. 8S-0023 [1] CLIP (SLOT)  
18. 8S-0024 [1] CLIP (TAB)  
19. 258-8917 [1] SLEEVE-PROTECTION  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP53030112
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 80M1-153
i00089943 SEBP5303
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 125-3225 Y [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP53030113
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 80M154-186
i00089944 SEBP5303
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 133-1708 YC [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53030114
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 80M187-594
i00089945 SEBP5303
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 134-1598 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53030115
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 80M595-1003
i00089946 SEBP5303
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 134-9405 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53030116
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 80M1004-2693
i00515008 SEBP5303
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 144-0835 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53030117
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 80M2694-2772
i01055140 SEBP5303
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 169-1034 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53030118
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 80M2773-4511
i01094111 SEBP5303
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 144-0835 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 161-9931 CY [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53030119
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 80M4512-5364
i01557064 SEBP5303
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 773B TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 201-4201 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 194-6725 CY [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Service Letter-NACD
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Australia
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-CFEL
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-CSARL
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Americas
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Brazil
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Specifications
Fuel Injection Nozzle And Adapters
3412 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Asia
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-APD
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Brackets And Clamps Need To Be Installed On The Fuel Lines Group Of Certain D10N Tractors; 651E And 656E Tractors; 773B Trucks; And 992C Loaders
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Disassembly and Assembly
Primary Fuel Filter And Cover
SUPPLEMENT FOR 772B TRACTOR, 773B TRUCK & 775B QUARRY TRUCK-
Fuel Priming Pump, Fuel Filters And Base
SUPPLEMENT FOR 772B TRACTOR, 773B TRUCK & 775B QUARRY TRUCK-
Primary Fuel Filter And Cover
3412 VEHICULAR ENGINE FOR 772B TRACTOR & 773B TRUCK DISASSEM
Fuel Filters And Base
3412 VEHICULAR ENGINE FOR 772B TRACTOR & 773B TRUCK DISASSEM
Fuel Injection Valves
3412 VEHICULAR ENGINE FOR 772B TRACTOR & 773B TRUCK DISASSEM
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Washers Permit Locks To Hold Better{1252}
1982/01/25
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
New Fuel Nozzle Adapters Used{1106}
1983/05/09
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Additional Clamp Used In Fuel Injections Lines Groups{1252}
1994/08/08
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Caterpillar Parts SIS Catalog 773B :

LINES GP-FUEL
127-7366 LINES GP-FUEL
KIT-SEAL
138-6256 KIT-SEAL
166-5985 KIT-COMPENSATOR
INJECTOR GP-FUEL
232-1183 INJECTOR GP-FUEL
INJECTOR GP-FUEL
232-1168 INJECTOR GP-FUEL
INJECTOR GP-FUEL
198-7912 INJECTOR GP-FUEL
DRIVE GP-UNIT INJ HYD PUMP
180-6644 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
162-0149 DRIVE GP-UNIT INJ HYD PUMP
LINES GP-INJECTOR HYD PUMP
109-0399 LINES GP-INJECTOR HYD PUMP
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD

Truck sale:

Caterpillar 773B
 
Caterpillar 773B
- Off Highway Trucks
FINANZAUTO S.A.
Caterpillar 773B, Off Highway Trucks, Construction
29,488 
Caterpillar 773B, Off Highway Trucks, Construction
- Off Highway Trucks
FINANZAUTO S.A.
Caterpillar 773B
 
Caterpillar 773B
- Off Highway Trucks
FINANZAUTO S.A.
 
26.000 
Caterpillar 773B, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
QUINN COMPANY
 
26.000 
Caterpillar 773B, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
QUINN COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.