AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-3282 FILTER GP-SECONDARY FUEL S/N 6NC20632-33951; 10Z42848-UP 140G MOTOR GRADER


FUEL SYSTEM
FILTER GP-FUEL
GOVERNOR GP
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
GOVERNOR GP
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION

MOTOR GRADER 140G MOTOR GRADER 13W
 3306 DI Engine Emissions Retrofit Repower Tier I For 140G Motor Grader 13W00001-UP (MACHINE) SEBP5308 140G 13W   (1975)

FUEL SYSTEM

FILTER GP-FUEL
FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
 

#SEBP53080070
 

2W-3282: FILTER GP-SECONDARY FUEL

2W-3282 FILTER GP-SECONDARY FUEL
S/N 6NC20632-33951; 10Z42848-UP
i00124607 SEBP5308
2W3282 FILTER GP-SECONDARY FUEL Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9519 [1] BASE AS-FUEL FILTER  
2. 5M-6214 [1] PLUG-PIPE  
3. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
5. 4W-9057 C [1] TUBE AS  
6. 030-7947 [1] ELBOW  
7. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 7N-9520 [1] GASKET  
9. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
10. 5P-4289 [1] ELBOW  
11. 3J-1907 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP53080071
 

2W-6559: GOVERNOR GP

2W-6559 GOVERNOR GP
S/N 6NC66-33951; 10Z42848-UP
PART OF 113-5342 PUMP GP-GOV & FUEL INJ
i00656108 SEBP5308
2W6559 GOVERNOR GP Parts scheme 2W6559 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 [1] PLUG  
2. 8N-3259 [1] COVER-HIGH IDLE  
3. 371-6684 [1] SETSCREW  
3A. 371-6684 [1] SETSCREW  
4. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
5. 3J-7354 [1] SEAL-O-RING  
6. 9A-7377 [1] VALVE AS-NEEDLE (THROTTLE RESPONSE)  
  4N-5484 [1] VALVE-NEEDLE  
  4N-5485 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
7. 6I-2003 [1] GASKET  
8. 0S-1616 [6] BOLT (1/4-20X1-IN)  
9. 7N-8780 [1] COVER AS-CONTROL  
9A. 138-9507 [1] SEAL-LIP TYPE  
10. 7N-8775 [1] NUT-HIGH IDLE  
11. 150-3728 [1] GASKET  
12. 3P-0009 [1] INSULATOR  
13. 1P-2497 [2] BOLT-HEAD  
14. 8N-3258 [1] COVER-LOAD STOP  
15. 2M-7819 [2] RING-RETAINING  
16. 7N-8785 [1] SHAFT-PIVOT  
17. 1N-3802 [1] SEAT-SPRING  
18. 2W-2216 [1] SPRING-LINK  
19. 1N-3800 [1] SLEEVE-RACK CONTROL  
20. 8N-2507 [1] PISTON AS-SERVO  
  7C-0791 [1] CYLINDER AS  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
20A. 1W-4098 [1] PISTON-GOVERNOR SERVO  
20B. 7W-0250 [1] SLEEVE  
20C. 5P-9757 [1] SEAL-O-RING  
21. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
22. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
23. 7W-4272 [1] NUT-SEALING (5/16-18-THD)  
24. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
25. 4N-2953 [1] RING-LOCK  
26. 7E-4892 [2] RACE-THRUST BEARING  
27. 7M-7219 [1] BEARING-THRUST  
28. 4W-6868 [1] RISER-GOVERNOR  
29. 4N-0432 [1] BALL BEARING  
30. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM .5IN LG)  
  4F-6024 [2] PIN (8MM .32IN LG)  
31. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
31A. 4N-6404 [1] RING-RETAINING  
32. 6I-2004 [1] GASKET  
33. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
34. 2N-0828 [2] WASHER  
35. 6N-3504 [1] SEAT-GOVERNOR SPRING  
36. 150-3730 [1] GASKET  
37. 8N-2501 [1] HOUSING AS-GOVERNOR  
  7E-5346 [1] VALVE AS (FUEL CHECK)  
  2F-2290 [1] PLUG-CORE  
  8N-3945 [1] BUSHING-TERMINAL  
37A. 8N-2499 [1] SPRING-GUIDE  
37B. 3D-8317 [1] RING-RETAINING  
37C. 4N-0260 [1] SEAL-LIP TYPE  
41. 7N-7270 [2] SLEEVE-SPRING  
42. 7N-8821 [3] RING-RETAINING  
43. 3K-5733 [1] SPRING  
44. 7N-7267 [1] SPRING  
45. 6D-3897 [1] BOLT (8-32X0.5-IN)  
46. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
47. 2W-6104 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
48. 1W-4243 [1] SPRING-BUMPER  
49. 2W-5161 [1] BOLT-LOAD STOP  
50. 8N-3256 [1] COLLAR-LOAD STOP  
51. 9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
52. 2W-6102 [1] LEVER-SPRING SEAT  
53. 2W-7400 [1] SPRING  
54. 8N-3087 [1] STOP-IDLE DETENT  
55. 7N-2172 [2] PIN  
56. 7N-2171 [4] RING-RETAINING  
57. 8L-5832 C [1] NUT-HEX (10-32-THD)  
58. 2W-9305 [2] PLATE-THROTTLE  
59. 8N-3168 [1] LEVER-THROTTLE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP53080072
 

397-3971: KIT-FUEL INJECTION PUMP

397-3971 KIT-FUEL INJECTION PUMP
S/N 13W1-UP
OPTIONAL FUEL PUMP REBUILD KIT FOR 3306 MACHINE ENGINE
FOR USE WITH @@@@@146-4337@@@@@
FIELD INSTALLATION
i05265229 SEBP5308
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4P-9827 Y [6] PUMP GP-FUEL INJECTION  
   
  4N-0432 [1] BALL BEARING  
  1S-1953 [1] BEARING-RACK  
  1W-3285 [1] BEARING-RACK  
  7L-3326 [1] BEARING-THRUST  
  7M-7219 [1] BEARING-THRUST  
  4P-9828 [1] BUSHING  
  7N-7970 [1] BUSHING  
  8N-3945 [1] BUSHING-TERMINAL  
  8N-5117 [6] BUSHING-TERMINAL  
  5F-2807 [6] CAP-SEALING  
  6I-1564 [1] DIAPHRAGM  
  1S-5440 [4] DOWEL  
  4N-9019 [1] DOWEL  
  6I-2003 [1] GASKET  
  6I-2004 [1] GASKET  
  7N-9520 [1] GASKET  
  144-0477 [1] GASKET  
  150-3724 [1] GASKET  
  150-3726 [1] GASKET  
  150-3728 [1] GASKET  
  150-3730 [1] GASKET  
  150-3727 [1] GASKET-FUEL  
  3P-0009 [1] INSULATOR  
  7W-4272 [1] NUT-SEALING (5/16-18-THD)  
  7N-2172 [2] PIN  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7E-4892 [2] RACE-THRUST BEARING  
  7N-7166 [2] RACE-THRUST BEARING  
  4N-2953 [1] RING-LOCK  
  2M-7819 [2] RING-RETAINING  
  3D-8317 [1] RING-RETAINING  
  7N-2171 [4] RING-RETAINING  
  7N-8421 [1] RING-RETAINING  
  7N-8821 [3] RING-RETAINING  
  8F-4610 [1] RING-RETAINING  
  8N-6680 [1] SCREEN AS  
  8N-5763 [1] SEAL  
  4N-0260 [1] SEAL-LIP TYPE  
  138-9507 [1] SEAL-LIP TYPE  
  2D-6392 [1] SEAL-O-RING  
  2H-3934 [1] SEAL-O-RING  
  3E-6760 [1] SEAL-O-RING  
  3J-1907 [3] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  4J-7533 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  5P-6620 [1] SEAL-O-RING  
  5P-6718 [1] SEAL-O-RING  
  5P-8210 [1] SEAL-O-RING  
  5P-9757 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
  8J-8343 [1] SEAL-O-RING  
  8M-8515 [1] SEAL-O-RING  
  033-5879 [1] SEAL-O-RING  
  061-9458 [1] SEAL-O-RING  
  114-8718 [6] SEAL-O-RING  
  6V-6921 [1] SEAL-RING  
  6N-3504 [1] SEAT-GOVERNOR SPRING  
  8N-3088 [1] SHAFT AS-THROTTLE  
  8N-2510 [1] SHAFT-WEIGHT CARRIER  
  7W-0250 [1] SLEEVE  
  4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
  2N-2878 [1] SPRING  
  2W-7400 [1] SPRING  
  3K-5733 [1] SPRING  
  7L-8056 [1] SPRING  
  8L-9790 [1] SPRING  
  8M-9140 [1] SPRING  
  8M-9141 [1] SPRING  
  8N-9594 [1] SPRING  
  9N-1754 [1] SPRING  
  7L-4958 [1] SPRING-GOVERNOR  
  8N-2499 [1] SPRING-GUIDE  
  7E-5346 [1] VALVE AS  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  2N-0828 [2] WASHER  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  7N-7264 [4] WEIGHT-GOVERNOR  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53080073
 

4P-9330: LINES GP-FUEL INJECTION

4P-9330 LINES GP-FUEL INJECTION
S/N 6NC66-33951; 10Z42848-UP
PART OF 113-5341 LINES GP-FUEL INJECTION
i00124634 SEBP5308
4P9330 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9381 [1] LINE AS-FUEL INJECTION (CYL NO. 1)  
2. 4P-9382 [1] LINE AS-FUEL INJECTION (CYL NO. 2)  
3. 104-4253 C [1] LINE AS-FUEL INJECTION (CYL NO. 3)  
4. 104-4254 C [1] LINE AS-FUEL INJECTION (CYL NO. 4)  
5. 1W-9169 [9] CLAMP-FUEL LINE (THREADED)  
6. 1W-9168 [7] CLAMP-FUEL LINE (NON-THREADED)  
7. 5P-4939 [6] SCREW-MACHINE (10-24X15.88-IN)  
8. 9N-3388 [3] BOLT (10-24X0.75-IN)  
9. 1W-9167 C [2] CLAMP AS-FUEL LINE  
10. 7C-7614 [1] BRACKET AS  
11. 4B-4274 [3] WASHER (5.5X13X1.2-MM THK)  
12. 9Y-7524 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP53080074
 

4P-9331: LINES GP-FUEL INJECTION

4P-9331 LINES GP-FUEL INJECTION
S/N 6NC66-33951; 10Z42848-UP
PART OF 113-5341 LINES GP-FUEL INJECTION
i00124635 SEBP5308
4P9331 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9385 [1] LINE AS-FUEL INJECTION (CYL NO. 5)  
2. 4P-9386 [1] LINE AS-FUEL INJECTION (CYL NO. 6)  
3. 122-9405 [1] BRACKET AS  
4. 1W-9169 [2] CLAMP-FUEL LINE (THREADED)  
5. 1W-9168 [4] CLAMP-FUEL LINE (NON-THREADED)  
6. 5P-4939 [2] SCREW-MACHINE (10-24X15.88-IN)  
7. 9N-3388 [1] BOLT (10-24X0.75-IN)  
 

#SEBP53080075
 

113-5341: LINES GP-FUEL INJECTION

113-5341 LINES GP-FUEL INJECTION
S/N 6NC66-33951; 10Z42848-UP
i00125027 SEBP5308
1135341 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9330 Y [1] LINES GP-FUEL INJECTION  
2. 4P-9331 Y [1] LINES GP-FUEL INJECTION  
3. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
4. 8N-5132 [6] CLAMP-NOZZLE  
5. 1T-0416 [6] BOLT (5/16-18X0.75-IN)  
6. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
7. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 0T-0055 [1] BOLT (3/8-16X4.25-IN)  
9. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
10. 2P-3200 [1] BOLT-WASHER HEAD  
11. 4P-2578 [1] BRACKET  
12. 1W-9167 [1] CLAMP AS-FUEL LINE  
13. 1W-9169 [1] CLAMP-FUEL LINE (THREADED)  
14. 9N-3388 [1] BOLT (10-24X0.75-IN)  
15. 4B-4274 [1] WASHER (5.5X13X1.2-MM THK)  
16. 3S-2713 [3] NUT-FULL (3/8-24-THD)  
17. 6V-6921 [1] SEAL-RING  
18. 2H-3934 [1] SEAL-O-RING  
19. 5P-6718 [1] SEAL-O-RING  
20. 061-9458 [1] SEAL-O-RING  
21. 170-5187 [6] NOZZLE AS  
    (EACH INCLUDES)
22. 9L-9098 [1] SEAL-CARBON STOP  
23. 7W-4486 [1] WASHER (9.76X17.14X1.8-MM THK)  
24. 271-2489 [1] SEAL-WASHER  
25. 9X-2836 M [1] SCREW-BUTTON HEAD  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53080076
 

128-7984: PROTECTION GP-FUEL SYSTEM

128-7984 PROTECTION GP-FUEL SYSTEM
S/N 6NC66-33951; 10Z42848-UP
i00125092 SEBP5308
1287984 PROTECTION GP-FUEL SYSTEM Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-7796 [1] BOLT-TAMPERPROOF (1/4-20 X 3.75 IN)  
2. 128-7794 [1] BOLT-TAMPERPROOF (1/4-20 X 1.125 IN)  
 

#SEBP53080077
 

2W-4160: PUMP & MTG GP-FUEL TRANSFER

2W-4160 PUMP & MTG GP-FUEL TRANSFER
S/N 6NC66-33951; 10Z42848-UP
i00124608 SEBP5308
2W4160 PUMP & MTG GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
2. 1W-1695 Y [1] PUMP GP-FUEL TRANSFER  
3. 4B-9365 [1] BOLT (1/4-20X3-IN)  
4. 4J-8997 C [1] SEAL-O-RING  
5. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53080078
 

4P-9827: PUMP GP-FUEL INJECTION

4P-9827 PUMP GP-FUEL INJECTION
PART OF 397-3971 KIT-FUEL INJECTION PUMP, 111-3769 PUMP GP-FUEL INJECTION
i00124636 SEBP5308
4P9827 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 6I-1327 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK (FUEL)  
5. 4P-9830 [1] PLUNGER AS  
6. 7C-5278 [1] BOLT-PLUNGER GEAR (FUEL PUMP)  
7. 7N-1066 [1] WASHER-RETAINING  
8. 7C-9966 [1] INSERT  
 

#SEBP53080079
 

111-3769: PUMP GP-FUEL INJECTION

111-3769 PUMP GP-FUEL INJECTION
S/N 6NC66-33951; 10Z42848-UP
PART OF 113-5342 PUMP GP-GOV & FUEL INJ
i00125000 SEBP5308
1113769 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
2. 4J-7533 [2] SEAL-O-RING  
3. 1W-3286 [1] RACK-REGULATOR  
4. 4P-9827 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
14. 111-3770 [1] CAMSHAFT AS  
  111-3771 [1] CAMSHAFT-FUEL PUMP  
15. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
16. 7N-7264 [4] WEIGHT-GOVERNOR  
17. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
18. 1S-5440 [4] DOWEL  
19. 7E-3986 [1] CARRIER-WEIGHT  
20. 7N-7166 [2] RACE-THRUST BEARING  
21. 7L-3326 [1] BEARING-THRUST  
22. 4N-9019 [1] DOWEL  
23. 4P-9840 [1] HOUSING AS  
24. 1S-1953 [1] BEARING-RACK  
25. 1W-3285 [1] BEARING-RACK  
26. 6I-0979 [6] DOWEL  
27. 7N-7970 [1] BUSHING  
28. 4P-9828 [1] BUSHING  
29. 4P-8480 [6] PIN-PUMP GUIDE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
Disassembly and Assembly
Fuel Filter Base - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14

Caterpillar Parts SIS Catalog 140G :

FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
COVER GP-TACHOMETER DRIVE
1W-2481 COVER GP-TACHOMETER DRIVE
CONTROL GP-FUEL RATIO
111-5162 CONTROL GP-FUEL RATIO
TURBOCHARGER GP
219-1911 TURBOCHARGER GP
TURBOCHARGER GP
113-5340 TURBOCHARGER GP
TURBOCHARGER GP
113-5340 TURBOCHARGER GP
MANIFOLD GP-EXHAUST
134-4208 MANIFOLD GP-EXHAUST
GOVERNOR GP
2W-6559 GOVERNOR GP
397-3971 KIT-FUEL INJECTION PUMP
LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9331 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
113-5341 LINES GP-FUEL INJECTION
PROTECTION GP-FUEL SYSTEM
128-7984 PROTECTION GP-FUEL SYSTEM
PUMP & MTG GP-FUEL TRANSFER
2W-4160 PUMP & MTG GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.