AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-1653 CARTRIDGE GP-TURBOCHARGER S/N 99C7615-UP PART OF 1W-5580 TURBOCHARGER GP 631D WHEEL TRACTOR


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LINES GP-AIR
MANIFOLD GP-EXHAUST
MUFFLER GP
TURBOCHARGER GP
FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
LINES GP-FUEL INJECTION

WHEEL TRACTOR 631D WHEEL TRACTOR 24W
 3408E Engine Emissions Repower Tier I For 631D,633D,637D, And 639D Wheel Tractor 24W00001-UP (MACHINE) SEBP5316 631D 24W   (1975)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
129-5250 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
1W-1653 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
127-9177 TURBOCHARGER GP
TURBOCHARGER GP
1W-5580 TURBOCHARGER GP
 

#SEBP53160070
 

1W-1653: CARTRIDGE GP-TURBOCHARGER

1W-1653 CARTRIDGE GP-TURBOCHARGER
S/N 99C7615-UP
PART OF 1W-5580 TURBOCHARGER GP
i00093382 SEBP5316
1W1653 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3701 [1] SHROUD  
2. 7N-3759 J [1] RING-PISTON  
3. 6N-5004 J [1] BEARING-THRUST  
4. 9M-8911 [1] COLLAR-THRUST  
5. 9M-8919 J [2] RING-SEAL  
6. 9M-8915 J [3] RING-RETAINING  
7. 0S-1616 [4] BOLT (1/4-20X1-IN)  
8. 6N-7962 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
9. 1P-1120 J [1] RING-SEAL  
10. 129-4863 [1] WHEEL-COMPRESSOR  
11. 9N-2046 [1] SPACER-THRUST  
12. 1S-1770 J [1] LOCKNUT-TURBOCHARGER  
13. 9N-2036 J [4] PLATE-LOCK  
14. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 [1] RING-SEAL  
15. 9N-2043 [1] WHEEL & SHAFT AS  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
    (INCLUDES TWO BEARINGS)
  2W-0715 J [1] KIT-CARTRIDGE (TURBOCHARGER)  
    (INCLUDES SEAL RINGS, RETAINER RINGS, LOCK PLATES, LOCK-NUTS, & BEARING-THRUST)
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP53160071
 

232-7438: LINES GP-AIR

232-7438 LINES GP-AIR
S/N 99C7615-UP
i03421101 SEBP5316
2327438 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-9273 [1] ELBOW  
2. 4N-6296 [1] GASKET  
3. 1A-5183 [6] BOLT (3/8-16X4.75-IN)  
4. 4N-1849 [1] TUBE-AIR  
5. 4L-8337 [4] SEAL-O-RING  
6. 8N-0781 [1] BRACKET  
7. 110-5960 [1] TUBE AS  
  6B-3771 [1] CLAMP  
8. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
9. 9S-8752 [10] NUT-FULL (3/8-16-THD)  
10. 4N-6988 [1] SUPPORT AS  
11. 5M-2894 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 8N-0879 [4] CLAMP  
13. 214-9598 [1] MANIFOLD-TURBOCHARGER  
14. 5B-7890 [2] PLUG-PIPE  
15. 6I-2819 [1] TUBE AS  
16. 0L-1352 [3] BOLT (3/8-16X3.25-IN)  
17. 2M-7077 [1] SPACER (0.406X0.62X0.37-IN THK)  
18. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
19. 0S-1571 [8] BOLT (3/8-16X1.75-IN)  
 

#SEBP53160072
 

166-0164: MANIFOLD GP-EXHAUST

166-0164 MANIFOLD GP-EXHAUST
S/N 99C7615-UP
i01024961 SEBP5316
1660164 MANIFOLD GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-4109 [2] MANIFOLD-EXHAUST  
2. 2N-6319 [4] BOLT-HIGH TEMPERATURE  
3. 108-3612 [16] SPACER (11.13X19.05X53-MM THK)  
4. 5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 2N-2766 [20] LOCKNUT (3/8-16-THD)  
6. 129-9452 [8] GASKET-EXHAUST MANIFOLD  
7. 165-4267 [2] MANIFOLD-EXHAUST  
8. 7L-8055 [2] BELLOWS  
9. 2W-9779 [4] CLAMP-BAND  
 

#SEBP53160073
 

253-4431: MUFFLER & CONVERTER

253-4431 MUFFLER & CONVERTER
S/N 24W1-UP; 25W1-UP; 26W1-UP; 27W1-UP; 99X1-UP
1100 X 434 X 315-MM, 43 X 17 X 12-IN. PROVIDE AN OPTIONAL AFTERTREATMENT CATALYST MUFFLER FOR THE 631D,633D,637D,639D WHEEL TRACTOR-SCRAPER
FIELD INSTALLATION
i03851453 SEBP5316
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP53160074
 

127-9177: TURBOCHARGER GP

127-9177 TURBOCHARGER GP
S/N 99C7615-UP
i00093606 SEBP5316
1279177 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-5580 Y [1] TURBOCHARGER GP  
2. 1S-4295 [1] GASKET (TURBOCHARGER)  
3. 2N-2765 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53160075
 

1W-5580: TURBOCHARGER GP

1W-5580 TURBOCHARGER GP
S/N 99C7615-UP
PART OF 127-9177 TURBOCHARGER GP
i00093385 SEBP5316
1W5580 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8186 [1] HOUSING-COMPRESSOR  
2. 1W-1653 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 6N-4585 [1] HOUSING (TURBINE)  
5. 9N-2038 [1] CLAMP AS-TURBINE  
6. 9N-2039 [1] CLAMP AS (COMPRESSOR)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53160076
 

125-3428: DRIVE GP-UNIT INJ HYD PUMP

125-3428 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C7615-UP
i01324350 SEBP5316
1253428 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-6649 CY [1] DRIVE GP-UNIT INJ HYD PUMP  
2. 6V-3549 [1] SEAL-O-RING  
3. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
4. 194-6722 CY [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
5. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 6V-5049 [1] SEAL-O-RING  
8. 118-6335 [1] PIN  
9. 6V-4589 [1] SEAL-O-RING  
10. 5P-9890 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53160077
 

180-6649: DRIVE GP-UNIT INJ HYD PUMP

180-6649 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C7615-UP
PART OF 125-3428 DRIVE GP-UNIT INJ HYD PUMP
i01206068 SEBP5316
1806649 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-6645 [1] SHAFT AS  
  3S-6605 [1] PLUG-CUP  
2. 150-2392 [1] PLATE-THRUST  
3. 180-6646 [1] GASKET  
4. 180-6647 [1] HOUSING AS  
  2H-1190 [2] DOWEL  
4A. 162-0151 [1] BUSHING  
4B. 162-0152 [1] BUSHING  
5. 162-0161 [1] HOUSING AS  
  2A-3746 [1] PLUG-CUP  
5A. 162-0150 [1] BUSHING  
5B. 162-0151 [1] BUSHING  
6. 125-5835 [1] PLUG-FELT (UNIT INJ HYD PUMP)  
7. 1B-9575 [4] BOLT (5/16-18X1.56-IN)  
8. 0S-1618 [2] BOLT (5/16-18X1-IN)  
9. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
10. 9S-8004 [1] PLUG (9/16-18-THD)  
11. 6V-5049 [1] SEAL-O-RING  
12. 1D-4541 [2] BOLT (5/16-18X3-IN)  
13. 8M-6802 [3] SCREW-HEX SOCKET (1/4-20X1-IN)  
14. 155-6637 [1] GEAR-OIL DRIVE (18-TEETH)  
15. 124-6640 [1] PLATE  
16. 031-2701 [2] BOLT-LOCKING (5/16-18X1.25-IN)  
 

#SEBP53160078
 

198-7912: INJECTOR GP-FUEL

198-7912 INJECTOR GP-FUEL
S/N 99C7615-7687
PART OF 206-2630 PUMP GP-FUEL INJECTION
i01564569 SEBP5316
1987912 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-3598 [1] ADAPTER-INJECTION  
2. 116-7222 [1] SEAL-RECTANGULAR  
3. 136-1869 [2] BOLT-SOCKET HEAD  
4. 198-4752 [1] INJECTOR GP-FUEL  
 

#SEBP53160079
 

232-1168: INJECTOR GP-FUEL

232-1168 INJECTOR GP-FUEL
S/N 99C7688-UP
PART OF 206-2630 PUMP GP-FUEL INJECTION
FIELD REPLACEMENT ORDER @@@@@232-1183@@@@@, 1-115-3598 ADAPTER-INJECTION, 1-116-7222 SEAL-RECTANGULAR, 2-136-1869 BOLT-SOCKET HEAD
i02269432 SEBP5316
2321168 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 631D WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-3598 [1] ADAPTER-INJECTION  
2. 116-7222 [1] SEAL-RECTANGULAR  
3. 136-1869 [2] BOLT-SOCKET HEAD  
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Air And Exhaust Lines
3408 VEHICULAR ENGINE FOR 631D, 633D, 637D & 639D WHEEL TRAC
Turbocharger Impeller Installation
3408 VEHICULAR ENGINE FOR 631D, 633D, 637D & 639D WHEEL TRAC
Turbocharger<BR> (Schwitzer 4MF)
3408 VEHICULAR ENGINE FOR 631D, 633D, 637D & 639D WHEEL TRAC
Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Testing and Adjusting
Turbocharger - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Turbocharger
3408 VEHICULAR ENGINE FOR 631D,633D & 637D TRACTORS
Turbocharger - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Install
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Remove
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Install
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Exhaust Manifold And Air Lines Groups Changed To Prevent Exhaust Leakage{1059,1061}
1979/08/27
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Improved Hump Hose Used In Turbocharger Air Inlet Line{1058}
1979/09/17
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Seal Used In Air Lines Group {1058}
1994/03/21
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/06/27
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Cat<SUP>&reg;</SUP> Reman Now Offers New Turbocharger and Cartridge Groups for Certain Machine Engines {1052, 1053}
2014/09/11
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 631D :

AFTERCOOLER GP-WATER
308-0896 AFTERCOOLER GP-WATER
AFTERCOOLER GP-WATER
126-7290 AFTERCOOLER GP-WATER
PUMP GP-WATER
4N-1951 PUMP GP-WATER
PUMP GP-WATER
352-0209 PUMP GP-WATER
PUMP GP-WATER
137-1338 PUMP GP-WATER
PUMP GP-WATER
102-0457 PUMP GP-WATER
LINES GP-WATER
308-2242 LINES GP-WATER
LINES GP-WATER
110-3017 LINES GP-WATER
LINES GP-AIR
232-7438 LINES GP-AIR
MANIFOLD GP-EXHAUST
166-0164 MANIFOLD GP-EXHAUST
253-4431 MUFFLER & CONVERTER
TURBOCHARGER GP
127-9177 TURBOCHARGER GP
TURBOCHARGER GP
1W-5580 TURBOCHARGER GP
DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
180-6649 DRIVE GP-UNIT INJ HYD PUMP
INJECTOR GP-FUEL
198-7912 INJECTOR GP-FUEL

Truck sale:

Caterpillar 631D
 
Caterpillar 631D
- Scrapers
HOLT CAT
Caterpillar 631D, Schaber, Bau-Und Bergbauausrüstung
35.000 
Caterpillar 631D, Schaber, Bau-Und Bergbauausrüstung
- Scrapers
TRACTOR & EQUIPMENT CO.
Caterpillar 631D, Schaber, Bau-Und Bergbauausrüstung
35.000 
Caterpillar 631D, Schaber, Bau-Und Bergbauausrüstung
- Scrapers
TRACTOR & EQUIPMENT CO.
Caterpillar 631D, Schaber, Bau-Und Bergbauausrüstung
35.000 
Caterpillar 631D, Schaber, Bau-Und Bergbauausrüstung
- Scrapers
TRACTOR & EQUIPMENT CO.
Caterpillar 631D, Construction
38,000 
Caterpillar 631D, Construction
- Scrapers
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.